Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1810.03703 · Physical Review Applied

Three-Dimensional Superconducting Resonators at T<20 mK with Photon Lifetimes up to τ=2 s

A. Romanenko, R. Pilipenko, S. Zorzetti, D. Frolov, M. Awida, S. Belomestnykh, Sam Posen, A. Grassellino

Published Mar 12, 2020• 216 citations
arXivHTMLPDF

Abstract

Very-high-quality-factor superconducting radio-frequency cavities developed for accelerators can enable fundamental physics searches with orders of magnitude higher sensitivity, and they can also offer a path to a 1000-fold increase in the achievable coherence times for cavity-stored quantum states in three-dimensional circuit QED architecture. Here we report measurements of multiple accelerator cavities of resonant frequencies of ${f}_{0}=1.3$, 2.6, 5 GHz down to temperatures of about 10 mK and field levels down to a few photons, which reveal very long photon lifetimes up to 2 s, while also further exposing the role of the two-level systems (TLS) in niobium oxide. We also demonstrate how the TLS contribution can be greatly suppressed by vacuum heat treatments at 340--450 ${}^{\ensuremath{\circ}}\mathrm{C}$.

DOI
10.1103/physrevapplied.13.034032

Related papers

Probing the Role of Low Temperature Vacuum Baking on Photon Lifetimes in Superconducting Niobium 3-D Resonators

Daniel Bafia, Anna Grassellino, Alexander Romanenko

We discuss a potentially dramatic source of quantum decoherence in three-dimensional niobium superconducting resonators and in two-dimensional transmon qubits that utilize oxidized niobium: an aggravation of two-level system (TLS) induced losses driven by vacuum baking at temperatures and durations typically used in transmon qubit fabrication. By coupling RF measurements on cavities with time-of-flight secondary ion mass spectrometry studies on an SRF cavity cutout, we find that modest vacuum baking (150-200~$^{\circ}$C for 5~min-11~hrs) produces a partially depleted native niobium oxide which likely contains a large concentration of oxygen vacancies that drive TLS losses. Continued baking is found to eliminate this depleted layer and mediate these additional losses.

•Aug 30, 2021•1 citation

Oxygen vacancies in niobium pentoxide as a source of two-level system losses in superconducting niobium

Daniel Bafia, Akshay A. Murthy, A. Grassellino +1 more

We identify a major source of quantum decoherence in three-dimensional superconducting radio-frequency (SRF) resonators and two-dimensional transmon qubits composed of oxidized niobium: oxygen vacancies in the niobium pentoxide, which drive two-level system (TLS) losses. By probing the effect of sequential in situ vacuum-baking treatments on the rf performance of bulk $\mathrm{Nb}$ SRF resonators and on the oxide structure of a representative $\mathrm{Nb}$ sample using TOF SIMS, we find a nonmonotonic evolution of cavity quality factor ${Q}_{0}$, which correlates with the interplay of ${\mathrm{Nb}}_{2}{\mathrm{O}}_{5}$ vacancy generation and oxide-thickness reduction. We localize this effect to the oxide itself and present the insignificant role of diffused interstitial oxygen in the underlying $\mathrm{Nb}$ by regrowing the oxide via wet oxidation, which reveals a mitigation of aggravated TLS losses. We hypothesize that such vacancies in the pentoxide serve as magnetic impurities and are a source of TLS-driven rf loss.

arXiv:2108.13352•Physical Review Applied•Aug 12, 2024•35 citations

Reaching 10 ms single photon lifetimes for superconducting aluminum cavities

Matthew Reagor, Hanhee Paik, Gianluigi Catelani +10 more

Three-dimensional microwave cavities have recently been combined with superconducting qubits in the circuit quantum electrodynamics architecture. These cavities should have less sensitivity to dielectric and conductor losses at surfaces and interfaces, which currently limit the performance of planar resonators. We expect that significantly (>103) higher quality factors and longer lifetimes should be achievable for 3D structures. Motivated by this principle, we have reached internal quality factors greater than 0.5 × 109 and intrinsic lifetimes of 0.01 s for multiple aluminum superconducting cavity resonators at single photon energies and millikelvin temperatures. These improvements could enable long lived quantum memories with submicrosecond access times when strongly coupled to superconducting qubits.

arXiv:1302.4408•Applied Physics Letters•May 13, 2013•244 citations

Towards multi-qudit quantum processor using superconducting RF cavities

Tanay Roy

Superconducting radio-frequency (SRF) cavities made using high-purity Niobium can reach single photon lifetimes longer than a second with proper treatment [1]. These resonator cavities are thus an excellent choice for storing higher-dimensional quantum states. However, preparing and manipulating quantum states with larger photon numbers require a nonlinear component, like a transmon, with a sufficiently long coherence time. With the advancement in materials processing enabling coherence times for transmons exceeding hundreds of micro-seconds, one can encode and process quantum information using d-levels (qudit) of the resonators. In this talk, we will present preliminary results showing the control of a single-qudit and our progress toward building multi-qudit architecture using multi-mode SRF cavities.

•Nov 2, 2023•2 citations

Reducing two-level systems dissipations in 3D superconducting niobium resonators by atomic layer deposition and high temperature heat treatment

Yasmine Kalboussi, Baptiste Delatte, Sarra Bira +16 more

Superconducting qubits have arisen as a leading technology platform for quantum computing, which is on the verge of revolutionizing the world's calculation capacities. Nonetheless, the fabrication of computationally reliable qubit circuits requires increasing the quantum coherence lifetimes, which are predominantly limited by the dissipations of two-level system defects present in the thin superconducting film and the adjacent dielectric regions. In this paper, we demonstrate the reduction of two-level system losses in three-dimensional superconducting radio frequency niobium resonators by atomic layer deposition of a 10 nm aluminum oxide Al2O3 thin films, followed by a high vacuum heat treatment at 650 °C for few hours. By probing the effect of several heat treatments on Al2O3-coated niobium samples by x-ray photoelectron spectroscopy plus scanning and conventional high resolution transmission electron microscopy coupled with electron energy loss spectroscopy and energy dispersive spectroscopy, we witness a dissolution of niobium native oxides and the modification of the Al2O3-Nb interface, which correlates with the enhancement of the quality factor at low fields of two 1.3 GHz niobium cavities coated with 10 nm of Al2O3.

arXiv:2402.04137•Applied Physics Letters•Mar 25, 2024•10 citations

Characterizing Niobium Nitride-Based Superconducting Coplanar Waveguide Resonators for Microwave Hybrid Circuit Quantum Electrodynamics

Paniz Foshat, Paul Baity, Sergey Danilin +8 more

The high critical magnetic field and relatively high critical temperature of niobium nitride (NbN) make it a promising material for applications in superconducting quantum technology. However, NbN-based superconducting circuits are sensitive to decoherence sources such as two-level system (TLS) defects. Here, we numerically and experimentally investigate NbN superconducting microwave coplanar waveguide resonator arrays with a 100 nm thickness, capacitively coupled to a common coplanar waveguide on a silicon chip. We observe that the resonators' internal quality factor ($Q_{i}$) decreases from$Q_{i}\sim 1.07\times 10^{6}$in a high power regime to$Q_{i}\sim 1.36\times 10^{5}$in the single photon regime. Data from this study is consistent with the TLS theory, which describes the TLS interactions in resonator substrates and interfaces. Moreover, we study the temperature ($T$) dependence of$Q_{i}$and resonance frequency$f_{r}$of coplanar waveguide resonators to characterize the quasiparticle density. We observe that the increase in kinetic inductance at higher temperatures is the main reason for the frequency shift. Finally, we measure$f_{r}$and$Q_{i}$in response to in-plane magnetic fields ($B_{||}$). We verify that$Q_{i}$stays well above$10^{4}$up to$B_{||}$= 240 mT in the photon number$< \! n_{ph} \! >$= 1.8 at$T$= 100 mK. Our results could enable the development of robust microwave superconducting circuits for circuit quantum electrodynamics at high magnetic fields required for hybrid superconducting-semiconducting quantum circuits.

arXiv:2306.02356•IEEE Transactions on Applied Superconductivity•Jan 22, 2025•18 citations
Very-high-quality-factor superconducting radio-frequency cavities developed for accelerators can enable fundamental physics searches with orders of magnitude higher sensitivity, and they can also offer a path to a 1000-fold increase in the achievable coherence times for cavity-stored quantum states in three-dimensional circuit QED architecture. Here we report measurements of multiple accelerator cavities of resonant frequencies of f0=1.3{f}_{0}=1.3f0​=1.3, 2.6, 5 GHz down to temperatures of about 10 mK and field levels down to a few photons, which reveal very long photon lifetimes up to 2 s, while also further exposing the role of the two-level systems (TLS) in niobium oxide. We also demonstrate how the TLS contribution can be greatly suppressed by vacuum heat treatments at 340--450 \ensuremath∘C{}^{\ensuremath{\circ}}\mathrm{C}\ensuremath∘C.
We discuss a potentially dramatic source of quantum decoherence in three-dimensional niobium superconducting resonators and in two-dimensional transmon qubits that utilize oxidized niobium: an aggravation of two-level system (TLS) induced losses driven by vacuum baking at temperatures and durations typically used in transmon qubit fabrication. By coupling RF measurements on cavities with time-of-flight secondary ion mass spectrometry studies on an SRF cavity cutout, we find that modest vacuum baking (150-200~∘^{\circ}∘C for 5~min-11~hrs) produces a partially depleted native niobium oxide which likely contains a large concentration of oxygen vacancies that drive TLS losses. Continued baking is found to eliminate this depleted layer and mediate these additional losses.
We identify a major source of quantum decoherence in three-dimensional superconducting radio-frequency (SRF) resonators and two-dimensional transmon qubits composed of oxidized niobium: oxygen vacancies in the niobium pentoxide, which drive two-level system (TLS) losses. By probing the effect of sequential in situ vacuum-baking treatments on the rf performance of bulk Nb\mathrm{Nb}Nb SRF resonators and on the oxide structure of a representative Nb\mathrm{Nb}Nb sample using TOF SIMS, we find a nonmonotonic evolution of cavity quality factor Q0{Q}_{0}Q0​, which correlates with the interplay of Nb2O5{\mathrm{Nb}}_{2}{\mathrm{O}}_{5}Nb2​O5​ vacancy generation and oxide-thickness reduction. We localize this effect to the oxide itself and present the insignificant role of diffused interstitial oxygen in the underlying Nb\mathrm{Nb}Nb by regrowing the oxide via wet oxidation, which reveals a mitigation of aggravated TLS losses. We hypothesize that such vacancies in the pentoxide serve as magnetic impurities and are a source of TLS-driven rf loss.
Three-dimensional microwave cavities have recently been combined with superconducting qubits in the circuit quantum electrodynamics architecture. These cavities should have less sensitivity to dielectric and conductor losses at surfaces and interfaces, which currently limit the performance of planar resonators. We expect that significantly (>103) higher quality factors and longer lifetimes should be achievable for 3D structures. Motivated by this principle, we have reached internal quality factors greater than 0.5 × 109 and intrinsic lifetimes of 0.01 s for multiple aluminum superconducting cavity resonators at single photon energies and millikelvin temperatures. These improvements could enable long lived quantum memories with submicrosecond access times when strongly coupled to superconducting qubits.
Superconducting radio-frequency (SRF) cavities made using high-purity Niobium can reach single photon lifetimes longer than a second with proper treatment [1]. These resonator cavities are thus an excellent choice for storing higher-dimensional quantum states. However, preparing and manipulating quantum states with larger photon numbers require a nonlinear component, like a transmon, with a sufficiently long coherence time. With the advancement in materials processing enabling coherence times for transmons exceeding hundreds of micro-seconds, one can encode and process quantum information using d-levels (qudit) of the resonators. In this talk, we will present preliminary results showing the control of a single-qudit and our progress toward building multi-qudit architecture using multi-mode SRF cavities.
Superconducting qubits have arisen as a leading technology platform for quantum computing, which is on the verge of revolutionizing the world's calculation capacities. Nonetheless, the fabrication of computationally reliable qubit circuits requires increasing the quantum coherence lifetimes, which are predominantly limited by the dissipations of two-level system defects present in the thin superconducting film and the adjacent dielectric regions. In this paper, we demonstrate the reduction of two-level system losses in three-dimensional superconducting radio frequency niobium resonators by atomic layer deposition of a 10 nm aluminum oxide Al2O3 thin films, followed by a high vacuum heat treatment at 650 °C for few hours. By probing the effect of several heat treatments on Al2O3-coated niobium samples by x-ray photoelectron spectroscopy plus scanning and conventional high resolution transmission electron microscopy coupled with electron energy loss spectroscopy and energy dispersive spectroscopy, we witness a dissolution of niobium native oxides and the modification of the Al2O3-Nb interface, which correlates with the enhancement of the quality factor at low fields of two 1.3 GHz niobium cavities coated with 10 nm of Al2O3.
The high critical magnetic field and relatively high critical temperature of niobium nitride (NbN) make it a promising material for applications in superconducting quantum technology. However, NbN-based superconducting circuits are sensitive to decoherence sources such as two-level system (TLS) defects. Here, we numerically and experimentally investigate NbN superconducting microwave coplanar waveguide resonator arrays with a 100 nm thickness, capacitively coupled to a common coplanar waveguide on a silicon chip. We observe that the resonators' internal quality factor (QiQ_{i}Qi​) decreases fromQi∼1.07×106Q_{i}\sim 1.07\times 10^{6}Qi​∼1.07×106in a high power regime toQi∼1.36×105Q_{i}\sim 1.36\times 10^{5}Qi​∼1.36×105in the single photon regime. Data from this study is consistent with the TLS theory, which describes the TLS interactions in resonator substrates and interfaces. Moreover, we study the temperature (TTT) dependence ofQiQ_{i}Qi​and resonance frequencyfrf_{r}fr​of coplanar waveguide resonators to characterize the quasiparticle density. We observe that the increase in kinetic inductance at higher temperatures is the main reason for the frequency shift. Finally, we measurefrf_{r}fr​andQiQ_{i}Qi​in response to in-plane magnetic fields (B∣∣B_{||}B∣∣​). We verify thatQiQ_{i}Qi​stays well above10410^{4}104up toB∣∣B_{||}B∣∣​= 240 mT in the photon number< ⁣nph ⁣>< \! n_{ph} \! ><nph​>= 1.8 atTTT= 100 mK. Our results could enable the development of robust microwave superconducting circuits for circuit quantum electrodynamics at high magnetic fields required for hybrid superconducting-semiconducting quantum circuits.