The control and manipulation of quantum systems without excitation are challenging, due to the complexities in fully modeling such systems accurately and the difficulties in controlling these inherently fragile systems experimentally. For example, while protocols to decompress Bose-Einstein condensates (BECs) faster than the adiabatic timescale (without excitation or loss) have been well developed theoretically, experimental implementations of these protocols have yet to reach speeds faster than the adiabatic timescale. In this work, we experimentally demonstrate an alternative approach based on a machine-learning algorithm which makes progress toward this goal. The algorithm is given control of the coupled decompression and transport of a metastable helium condensate, with its performance determined after each experimental iteration by measuring the excitations of the resultant BEC. After each iteration the algorithm adjusts its internal model of the system to create an improved control output for the next iteration. Given sufficient control over the decompression, the algorithm converges to a solution that sets the current speed record in relation to the adiabatic timescale, beating out other experimental realizations based on theoretical approaches. This method presents a feasible approach for implementing fast-state preparations or transformations in other quantum systems, without requiring a solution to a theoretical model of the system. Implications for fundamental physics and cooling are discussed.
The control and manipulation of quantum systems without excitation are challenging, due to the complexities in fully modeling such systems accurately and the difficulties in controlling these inherently fragile systems experimentally. For example, while protocols to decompress Bose-Einstein condensates (BECs) faster than the adiabatic timescale (without excitation or loss) have been well developed theoretically, experimental implementations of these protocols have yet to reach speeds faster than the adiabatic timescale. In this work, we experimentally demonstrate an alternative approach based on a machine-learning algorithm which makes progress toward this goal. The algorithm is given control of the coupled decompression and transport of a metastable helium condensate, with its performance determined after each experimental iteration by measuring the excitations of the resultant BEC. After each iteration the algorithm adjusts its internal model of the system to create an improved control output for the next iteration. Given sufficient control over the decompression, the algorithm converges to a solution that sets the current speed record in relation to the adiabatic timescale, beating out other experimental realizations based on theoretical approaches. This method presents a feasible approach for implementing fast-state preparations or transformations in other quantum systems, without requiring a solution to a theoretical model of the system. Implications for fundamental physics and cooling are discussed.
Machine learning is emerging as a technology that can enhance physics experiment execution and data analysis. Here, we apply machine learning to accelerate the production of a Bose-Einstein condensate (BEC) of 87Rb atoms by Bayesian optimization of up to 55 control parameters. This approach enables us to prepare BECs of $2.8\ifmmode\times\else\texttimes\fi{}{10}^{3}$ optically trapped 87Rb atoms from a room-temperature gas in 575 ms. The algorithm achieves the fast BEC preparation by applying highly efficient Raman cooling to near quantum degeneracy, followed by a brief final evaporation. We anticipate that many other physics experiments with complex nonlinear system dynamics can be significantly enhanced by a similar machine-learning approach.
We apply an online optimization process based on machine learning to the production of Bose-Einstein condensates (BEC). BEC is typically created with an exponential evaporation ramp that is optimal for ergodic dynamics with two-body s-wave interactions and no other loss rates, but likely sub-optimal for real experiments. Through repeated machine-controlled scientific experimentation and observations our 'learner' discovers an optimal evaporation ramp for BEC production. In contrast to previous work, our learner uses a Gaussian process to develop a statistical model of the relationship between the parameters it controls and the quality of the BEC produced. We demonstrate that the Gaussian process machine learner is able to discover a ramp that produces high quality BECs in 10 times fewer iterations than a previously used online optimization technique. Furthermore, we show the internal model developed can be used to determine which parameters are essential in BEC creation and which are unimportant, providing insight into the optimization process of the system.
Bose-Einstein condensates (BECs), a quantum state of matter formed when bosonic atoms are cooled close to absolute zero, have become the premier platform for investigating fundamental physics with atomic vapours. Experiments on Bose-Einstein condensates now achieve exquisite control over many aspects of the system, including interactions, trapping potential, and dynamics. This has precipitated a new wave of research into many-body quantum phenomena and, in particular, solitons. These structures are fundamental excitations of an interacting non-linear medium, of interest to a multitude of scientific disciplines from non-linear optics to financial markets. The highly controllable environment of BECs form an attractive playground for the study of solitons allowing the non-linearity to be dynamically tuned, facilitating deeper investigations into these structures. Consistently generating and analysing solitons in BEC experiments continues to be problematic. In particular, the non-linear dynamics of BECs, though required for the generation of solitons, produce particularly challenging control and optimization problems. These control problems must be solved before further investigations into the fundamental physics of soliton dynamics can be answered. This thesis makes three important advances in the control and measurement of BECs that will lead to better generation and observation of solitons. (1) a theoretical model for a control scheme capable of highly precise wavefunction engineering, (2) the experimental implementation of a machine learning algorithm for online optimisation, and (3) a continuous non-destructive imaging system capable of directly observing soliton dynamics in real-time. Together, these advances provide a suite of tools for manipulating and exploiting solitons in Bose-Einstein condensates. A novel technique was developed theoretically, offering control of the macroscopic wavefunction of a Bose-Einstein condensate with unprecedented spatial resolution and speed. The ability to control the atomic wavefunction at the fundamental length scale is key to the advancement of many quantum technologies such as quantum simulators. The magnetic resonance control scheme is demonstrated through simulation of a 87Rb condensate with the exemplar model generating a single dark soliton with corresponding π phase kink. The soliton represents a structure at the fundamental length scale of the system, and demonstrates the potential of the scheme for precision state engineering. The scheme is extended to generate higher-order soliton modes which are yet to be experimentally realised. A machine learning algorithm based on Gaussian processes was developed and implemented on the evaporative cooling stage of the production of a 87Rb Bose-Einstein condensate, successfully demonstrating fast optimisation to condensation. The Gaussian process develops a statistical model based on the data that enables the characterisation of the relationship between the experimental controls and resultant quality of the BEC. This relationship is often obfuscated through technical details of the apparatus, frustrating the use of theoretical models to design optimal evaporation ramps. These models often only consider ergodic dynamics with two-body s-wave interactions and no other loss rates with better ramps likely exploiting more complex interactions. The internal model generated from the Gaussian process utilised uncertainty in measured data, making the optimisation more robust to experimental noise than alternate methods. The algorithm is shown to produce high quality Bose-Einstein condensates in 10 times fewer experimental iterations than previously used online optimisation techniques. By exploiting information on the sensitivity of each control, the model can be used to aid experimental design. The convergence of the optimisation is further improved by eliminating a superfluous parameter identified by the model. The general usefulness of machine learning compared with bespoke optimisation algorithms has seen machine learning approach ubiquity. Finally, an experimentally straightforward technique for continuous non-destructive imaging of matter-wave solitons was developed and implemented, facilitating measurements of stochastic phenomena. The technique is readily practicable on any ultracold atom experiment with an existing absorption imaging system, simply requiring the probe laser be far-detuned from resonance. With a signal-to-noise of ∼ 33 at 1.25 GHz detuning, the technique is capable of producing 100 images with no observable heating or atom loss. Coupled with a fast optical phase locked loop, the technique can be used in conjunction with absorption imaging to generate a series of non-destructive images followed by a final high signal-to-noise absorption image solely through moving the laser on resonance for the final image. The high performance and utility of this imaging setup make it a powerful tool for ultra-cold atom experiments.
An energy gap develops near quantum critical point of quantum phase transition in a finite many-body (MB) system, facilitating the ground state transformation by adiabatic parameter change. In real application scenarios, however, the efficacy for such a protocol is compromised by the need to balance finite system lifetime with adiabaticity, as exemplified in a recent experiment that prepares three-mode balanced Dicke state near deterministically [Y.-Q. Zou et al., Proc. Natl. Acad. Sci. U.S.A. 115, 6381 (2018)PNASA60027-842410.1073/pnas.1715105115]. Instead of tracking the instantaneous ground state as unanimously required for most adiabatic crossing, this work reports a faster sweeping policy taking advantage of excited level dynamics. It is obtained based on deep reinforcement learning (DRL) from a multistep training scheme we develop. In the absence of loss, a fidelity ≥99% between prepared and the target Dicke state is achieved over a small fraction of the adiabatically required time. When loss is included, training is carried out according to an operational benchmark, the interferometric sensitivity of the prepared state instead of fidelity, leading to better sensitivity in about half of the previously reported time. Implemented in a Bose-Einstein condensate of ∼10^{4} ^{87}Rb atoms, the balanced three-mode Dicke state exhibiting an improved number squeezing of 13.02±0.20 dB is observed within 766 ms, highlighting the potential of DRL for quantum dynamics control and quantum state preparation in interacting MB systems.
The fast and efficient preparation of quantum critical states is a challenging yet crucial task for various quantum technologies. This difficulty is most particularly for systems near a quantum phase transition, where the closure of the energy gap fundamentally limits the timescale of adiabatic processes and thus precludes rapid state preparation. We propose a framework using deep reinforcement learning (DRL) to rapidly prepare quantum critical states, with broad extendibility to light-matter interaction systems. Specifically, a DRL agent optimizes a set of time-dependent control Hamiltonians to drive the system from an initial noncritical state to a target critical state within a finite time and over experimentally accessible parameter ranges. As a concrete application, we focus on the quantum Rabi model. The DRL-optimized time-dependent control Hamiltonian yield a final state with high-fidelity (>0.999) to the target critical state. The protocol can be readily extended to other quantum critical systems described by light-matter interaction models, such as quantum Dicke model. This investigation provides a powerful new framework for preparing and manipulating quantum critical states.
We study experimentally and theoretically the controlled transfer of harmonically trapped ultracold gases between different quantum states. In particular, we experimentally demonstrate a fast decompression and displacement of both a non-interacting gas and an interacting Bose–Einstein condensate, which are initially at equilibrium. The decompression parameters are engineered such that the final state is identical to that obtained after a perfectly adiabatic transformation despite the fact that the fast decompression is performed in the strongly non-adiabatic regime. During the transfer the atomic sample goes through strongly out-of-equilibrium states, while the external confinement is modified until the system reaches the desired stationary state. The scheme is theoretically based on the invariants of motion and scaling equation techniques and can be generalized to decompression trajectories including an arbitrary deformation of the trap. It is also directly applicable to arbitrary initial non-equilibrium states.