We show for the first time that it is possible to realize laser beam focusing at the few-photon level in the four-wave-mixing process, and at the same time reduce the quantum uncertainty in width. The reduction in quantum uncertainty results directly from the strong suppression of local intensity fluctuations. This surprising effect of simultaneous focusing and reduction of width uncertainty is enabled by multi-spatial-mode (MSM) squeezing, and is not possible via any classical optical approach or single-spatial-mode squeezing. Our results open promising possibilities for quantum-enhanced imaging and metrology; as an example, the limit on the measurement of very small beam displacement can be enhanced within feasible experimental parameters because of beam focusing and the noiseless amplification in the MSM squeezing process.
We show for the first time that it is possible to realize laser beam focusing at the few-photon level in the four-wave-mixing process, and at the same time reduce the quantum uncertainty in width. The reduction in quantum uncertainty results directly from the strong suppression of local intensity fluctuations. This surprising effect of simultaneous focusing and reduction of width uncertainty is enabled by multi-spatial-mode (MSM) squeezing, and is not possible via any classical optical approach or single-spatial-mode squeezing. Our results open promising possibilities for quantum-enhanced imaging and metrology; as an example, the limit on the measurement of very small beam displacement can be enhanced within feasible experimental parameters because of beam focusing and the noiseless amplification in the MSM squeezing process.
Quantum squeezed states, exhibiting noise reduction below the shot-noise limit, are important resources in quantum optics. The degree of quantum squeezing directly influences the performance of physical systems, making the achievement of higher squeezing levels essential. Here, by utilizing the phase-sensitive cascaded four-wave mixing (PSCFWM) processes, we experimentally demonstrate the enhancement of three-beam quantum squeezing. The intensity-difference squeezing among the three output beams from PSCFWM processes is about 8.2 dB, which is enhanced by about 1.3 dB compared with that generated by phase-insensitive cascaded four-wave mixing processes. Our scheme provides an effective way for enhancing multi-beam quantum squeezing and holds promise for applications in multimode quantum correlated imaging and multiparameter quantum precision measurement.
The spatial character of the noise on a light field affects its usefulness for imaging. Multi-spatial-mode (MSM) squeezed light has noise below the quantum noise limit in multiple spatial modes, and can be used for super resolution imaging. The generation of such light has long been an experimental goal within the field of quantum optics. \n \nThis work introduces the theory behind the generation of squeezed light, and its measurement using a homodyne detector. A four-wave mixing process in a rubidium 85 vapour is used to experimentally generate squeezed light. The properties of this squeezed light are investigated, through the use of homodyne detection with a bichromatic LO. \n \nThis thesis further investigates how the squeezed quadrature changes from amplitude to phase over a range of 40 MHz. The MSM nature of a squeezed light field is directly investigated. The field is shown to contain at least 75 squeezed spatial modes in the frequency domain, each squeezed at a level of up to -2.5 dB. This thesis develops techniques to measure the spatial character of noise on a light field in the time domain. These are promising techniques for the analysis of the MSM nature of a squeezed light in the time domain.
Noise suppression across multiple spatial modes of a light field would serve to improve the field's imaging capabilities and allow it to act as a more effective carrier \nof quantum information. This thesis describes a scheme that utilises a nonlinear process (four wave mixing (4WM)) in Rubidium 85 in order to generate a single beam of \nlight that demonstrates sub quantum noise limit (QNL) quadrature fluctuations of up to -4dB across a multitude of spatial modes simultaneously. \n \nIncluded is a description of sub-QNL (squeezed) light, followed by a breakdown of how this 4WM arrangement generates the desired quantum noise suppression. Analysis \nhas been performed that displays explicitly how the phase matching arrangement that maximises the noise suppression differs from that which optimises the efficiency of the process. This consideration is crucial to understanding why the setup achieves the levels of squeezing observed despite the presence of a strong absorption feature. \n \nFinally, the multi-spatial-mode nature of the generated squeezing is observed directly via homodyne detection using local oscillators with a range of transverse profiles. These profiles select the mode of the signal to be analysed and as such the ability to detect squeezing using a range of them demonstrates its presence across all of these modes simultaneously.
Abstract The generation of multi-mode squeezing using four-wave mixing process has attracted considerable attention, offering significant potential for advancements in quantum communication, quantum key distribution, and quantum-enhanced sensing. In this paper, we propose a balanced regime within the dual-four-wave mixing (DFWM) process to theoretically generate quantum-enhanced multi-mode squeezed light. By operating at a plane-balanced regime, the relative intensity squeezing noise factor of the multi-mode beams can be made to approach zero theoretically, thus achieving perfect multi-mode squeezed states. Moreover, the generated beams at the plane-balanced regime exhibit quantum-enhanced entanglement superior to that of conventional four-wave mixing processes, offering significant implications for quantum information processing. The DFWM process can also be extended to multi-spatial-mode squeezing with a spatial-balanced regime, where the attainable squeezing degree is enhanced by a factor of G N , where N denotes mode numbers and G denotes the gain, facilitating simply experimental implementation within a single atomic system. The proposed method paves the way for practical applications in high-precision measurements, robust quantum communication networks, and advanced quantum information processing systems.
Light is used across a broad range of applications from imaging to communications. These fields have advanced sufficiently that measurements are now limited by the fundamental behaviour of light, such as fluctuations inherent to its quantum nature. This is dictated by quantum mechanics, most noticeably Heisenberg's uncertainty principle, having been adapted to describe light and form quantum optics. \nAs it is bound by the uncertainty principle, measuring an observable of light can be made more accurate by adding uncertainty to conjugate observables. This improved accuracy is then gauged against the quantum noise limit (QNL) of the measured observable. Such measurements are then squeezed where the noise of the measurement is below this QNL. In this thesis, we examine the squeezing of light via four wave mixing (4WM) in a rubidium 85 (Rb85) atomic vapour. This includes the generation and detection of squeezed light in its temporal and spatial degrees of freedom. We consider various methods of detection, such as homodyne detection to measure field quadratures, then intensity difference after a waveguide to observe preservation of local correlations, and finally local intensity difference squeezing with a CCD camera. \nThe three experiments each present different results. The broadband squeezing of light yielded variable squeezing across a bandwidth of 60MHz, displaying the multi-temporal mode nature of the process. Photodetection measurements and intensity difference of entangled light after being passed through a waveguide displayed local correlations between a range of corresponding regions within the beam profile, with squeezing of \\(\\sim\\)-1dB. CCD photodetection and intensity difference of this light showed squeezing of approximately -0.75dB in a single set of spatial Fourier frequencies encircling the central spatial frequency, 0mm\\(^{-1}\\), also referred to as DC, corresponding to 8 distinct squeezed spatial modes within the beams. \nThe use of a waveguide in transmitting local multi-spatial mode (MSM) correlations presents interesting possibilities in guiding said correlations for use in quantum communications and encryption protocols, with a vastly improved bit rate, if not also transmission of quantum images. This supplements the use of a CCD camera in measuring local MSM correlations in these beams which, in yielding positive results, can be utilized as a means of improved imaging beyond the QNL. \nGiven this exhaustive computational investigation, the results have conclusively shown MSM squeezing in signal beams generated from 4WM in a Rb85 vapour. Using the results from Chapter 6, this squeezing is distributed across 8 distinct spatial modes, with vertical spatial frequencies of ±4.96mm\\(^{-1}\\), ±2.48mm\\(^{-1}\\) and 0mm\\(^{-1}\\) and horizontal frequencies ±0.60mm\\(^{-1}\\), ±0.30mm\\(^{-1}\\) and 0mm\\(^{-1}\\). \nThese frequencies correspond to real space vertical sizes of 0.20mm and 0.40mm and horizontal sizes of 1.66mm and 3.33mm. These can be seen to be MSM squeezed regions, given that the size of the beams in the results were larger than this. The average height of the probe was 0.70mm, while the conjugate was 0.66mm while the average lengths were 6.17mm and 5.95mm. As these size exceed the length scales derived from the spatial frequencies, these frequencies thus show MSM squeezing.
Using continuous wave superposition of spatial modes, we demonstrate experimentally displacement measurement of a light beam below the standard quantum limit. Multimode squeezed light is obtained by mixing a vacuum squeezed beam and a coherent beam that are spatially orthogonal. Although the resultant beam is not squeezed, it is shown to have strong internal spatial correlations. We show that the position of such a light beam can be measured using a split detector with an increased precision compared to a classical beam. This method can be used to improve the sensitivity of small displacement measurements.