Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1806.08997 · Review of Scientific Instruments

Implementation of a stable, high-power optical lattice for quantum gas microscopy

A. Mazurenko, S. Blatt, F. Huber, M. F. Parsons, C. S. Chiu, G. Ji, Daniel Greif, Markus Greiner

Published Mar 1, 2019• 13 citations
arXivHTMLPDF

Abstract

We describe the design and implementation of a stable high-power 1064 nm laser system to generate optical lattices for experiments with ultracold quantum gases. The system is based on a low-noise laser amplified by an array of four heavily modified, high-power fiber amplifiers. The beam intensity is stabilized and controlled with a nonlinear feedback loop. Using real-time monitoring of the resulting optical lattice, we find the stability of the lattice site positions to be well below the lattice spacing over the course of hours. The position of the harmonic trap produced by the Gaussian envelope of the lattice beams is stable to about one lattice spacing and the long-term (six-month) relative root-mean-square stability of the lattice spacing itself is 0.5%.

DOI
10.1063/1.5066623

Related papers

Low-noise and high-power second harmonic generation of 532 nm laser for trapping ultracold atoms

Xuan-Kai Wang, Zhaoyu Zhou, Meng-Da Li +5 more

Optical lattices for coherently manipulating ultracold atoms demand high-power, low-noise, narrow-line-width, and continuous-wave lasers. Here, we report the implementation of a 30 W 532 nm low-noise laser by second harmonic generation from a 1064 nm fiber laser, which is capable to generate optical lattices for a quantum gas microscope of Rb87 atoms. The overall conversion efficiency is 59% at an input power of 51 W with a lithium triborate crystal coupled to a ring cavity. The relative intensity noise of the output laser is suppressed to -120 dBc/Hz in the range of 10 Hz-100 kHz with a high dynamic range of over 50 dB, which is suitable for long-term trapping and coherent manipulation of the quantum gases.

Review of Scientific Instruments•Dec 1, 2022•6 citations

High-powered optical superlattice with robust phase stability for quantum gas microscopy

Meng-Da Li, Wan Lin, An Luo +6 more

Optical superlattice has a wide range of applications in the study of ultracold atom physics. Especially, it can be used to trap and manipulate thousands of atom pairs in parallel which constitutes a promising system for quantum simulation and quantum computation. In the present work, we report on a high-power optical superlattice formed by a 532-nm and 1064-nm dual-wavelength interferometer with a short lattice spacing of 630 nm. The short-term fluctuation (in 10 seconds) of the relative phase between the short lattice and the long lattice is measured to be 0.003π, which satisfies the needs for performing two-qubit gates among neighboring lattice sites. We further implement this superlattice in a 87Rb experiment with a quantum gas microscope of single-site resolution, where the high-power 532-nm laser is necessary for pinning atoms in the short lattice during imaging, providing a unique platform for engineering quantum states.

Optics Express•Apr 12, 2021•16 citations

A high-power and low-noise 532-nm continuous-wave laser for quantum gas microscopy

Meng-Da Li, Yong-Guang Zheng, Wei-Yong Zhang +7 more

Low-noise, high-power 532-nm lasers are of great interest in many scientific research studies, such as gravitational wave detection and ultracold atom experiments. In particular, in the experiments of quantum gas microscopy, a large power of laser is necessary during the imaging process, while low noise is important for preventing the atoms from being heated up. In this work, we report on the generation of such a 532-nm continuous-wave laser by coherently combining two laser beams produced by single-pass second-harmonic generation. The power of the combined laser is up to 17 W. With the help of intensity stabilization, we are able to suppress the relative intensity noise to below -120 dBc/Hz. The generated laser satisfies the experimental requirements for integrating optical superlattices with a quantum gas microscope.

Review of Scientific Instruments•Aug 1, 2021•6 citations

Generating two-dimensional quantum gases with high stability*

Bo Xiao, Xuan-Kai Wang, Yong-Guang Zheng +6 more

Quantum gas microscopy has enabled the study on intriguing properties of ultracold atoms in optical lattices. It provides the cutting-edge technology for manipulating quantum many-body systems. In such experiments, atoms have to be prepared into a two-dimensional (2D) system for being resolved by microscopes with limited depth of focus. Here we report an experiment on slicing a single layer of the atoms trapped in a few layers of pancake-shaped optical traps to create a 2D system. This technique is implemented with a microwave “knife”, i.e., a microwave field with a frequency defined by the resonant condition with the Zeeman-shifted atomic levels related to a gradient magnetic field. It is crucial to keep a stable preparation of the desired layer to create the 2D quantum gas for future experimental applications. To achieve this, the most important point is to provide a gradient magnetic field with low noises and slow drift in combination with a properly optimized microwave pulse. Monitoring the electric current source and the environmental magnetic field, we applied an actively stabilizing circuit and realized a field drift of 0.042(3) mG/hour. This guarantees creating the single layer of atoms with an efficiency of 99.92(3)% while atoms are hardly seen in other layers within 48 hours, satisfying future experimental demands on studying quantum many-body physics.

Chinese Physics B•Apr 19, 2020•9 citations

FPGA-Based Real-Time Laser Beam Profiling and Stabilization System for Quantum Simulation Applications

Stefano Marti, Enis Mustafa, Giacomo Bisson +4 more

Lasers are imperative in quantum simulation experiments to trap and cool atoms. With the growing complexity of experimental setups, precise control and stability of the position and exotic shape of lasers have become essential for high-fidelity operations. However, disturbances such as temperature fluctuations, mechanical vibrations, deformation of materials, and acoustic noise pose challenges to fulfill these requirements. In this paper, we propose and evaluate the first system for stabilizing the laser's beam position using two high-resolution cameras with high frame-rates, and image processing in a field-programmable gate array (FPGA) with low latency and subsequent in-loop feedback to the laser control. The proposed image processing hardware extracts the Gaussian beam distribution from two 5 MP cameras at 47 fps and 435 ns latency. These are fed to four proportional-integral-derivative (PID) controllers implemented on the FPGA. The PID modules provide feedback through parallel digital-to-analog converter (DAC) channels for steering mirrors to stabilize the beam within 5 µm accuracy. Using two cameras at distinct sample distances on the optical axis allows for controlling the incidence angle of the laser beam onto the image planes. The current system is a building block for future extensions allowing real-time phase-feedback on optical lattices, stabilization of independent optical tweezers in an array, and focus position stabilization of transverse electromagnetic (e.g. TEM01) modes enabling large-scale quantum simulations.

Euromicro Conference on Digital System Design (DSD)•Sep 6, 2023•2 citations

Robust site-resolved addressing via dynamically tracking the phase of optical lattices

Yong-Guang Zheng, Zi-Hang Zhu, Ying Liu +7 more

Single-site-resolved addressing offers an unprecedented capability of manipulating atoms in optical lattices. We demonstrate a robust site-resolved addressing by locking the position of the addressing beam to the optical lattice phase. The addressing beam is modulated by a digital micromirror device (DMD) integrated into a quantum gas microscope (QGM). A typical experiment with ultracold atoms takes several hours to collect hundreds of samples by repeating the sequence of programmed operations, whose duration is 40 seconds. During the collection, the phase of optical lattices can drift over a few lattice sites. According to the phases of the lattice obtained from the current experimental realizations, we correct the addressing beam position for the subsequent realization by shifting the pattern of the activated micromirrors on the DMD. This feedback loop is compiled to an application with a graphical user interface (GUI) for relevant devices, which is synchronized to the experimental sequence. The long-term (5 hours) position deviation between the pointing of the addressing beam and the lattice phase is suppressed to a 0.02(2)/0.02(2) lattice spacing in the X/Y direction, verifying a 10-fold reduction in comparison to that without feedback. With the help of phase-locking, the success rate of site-resolved addressing is improved substantially from 60(7)% to 95(2)%.

Optics Letters•Jul 19, 2022•8 citations
We describe the design and implementation of a stable high-power 1064 nm laser system to generate optical lattices for experiments with ultracold quantum gases. The system is based on a low-noise laser amplified by an array of four heavily modified, high-power fiber amplifiers. The beam intensity is stabilized and controlled with a nonlinear feedback loop. Using real-time monitoring of the resulting optical lattice, we find the stability of the lattice site positions to be well below the lattice spacing over the course of hours. The position of the harmonic trap produced by the Gaussian envelope of the lattice beams is stable to about one lattice spacing and the long-term (six-month) relative root-mean-square stability of the lattice spacing itself is 0.5%.
Optical lattices for coherently manipulating ultracold atoms demand high-power, low-noise, narrow-line-width, and continuous-wave lasers. Here, we report the implementation of a 30 W 532 nm low-noise laser by second harmonic generation from a 1064 nm fiber laser, which is capable to generate optical lattices for a quantum gas microscope of Rb87 atoms. The overall conversion efficiency is 59% at an input power of 51 W with a lithium triborate crystal coupled to a ring cavity. The relative intensity noise of the output laser is suppressed to -120 dBc/Hz in the range of 10 Hz-100 kHz with a high dynamic range of over 50 dB, which is suitable for long-term trapping and coherent manipulation of the quantum gases.
Optical superlattice has a wide range of applications in the study of ultracold atom physics. Especially, it can be used to trap and manipulate thousands of atom pairs in parallel which constitutes a promising system for quantum simulation and quantum computation. In the present work, we report on a high-power optical superlattice formed by a 532-nm and 1064-nm dual-wavelength interferometer with a short lattice spacing of 630 nm. The short-term fluctuation (in 10 seconds) of the relative phase between the short lattice and the long lattice is measured to be 0.003π, which satisfies the needs for performing two-qubit gates among neighboring lattice sites. We further implement this superlattice in a 87Rb experiment with a quantum gas microscope of single-site resolution, where the high-power 532-nm laser is necessary for pinning atoms in the short lattice during imaging, providing a unique platform for engineering quantum states.
Low-noise, high-power 532-nm lasers are of great interest in many scientific research studies, such as gravitational wave detection and ultracold atom experiments. In particular, in the experiments of quantum gas microscopy, a large power of laser is necessary during the imaging process, while low noise is important for preventing the atoms from being heated up. In this work, we report on the generation of such a 532-nm continuous-wave laser by coherently combining two laser beams produced by single-pass second-harmonic generation. The power of the combined laser is up to 17 W. With the help of intensity stabilization, we are able to suppress the relative intensity noise to below -120 dBc/Hz. The generated laser satisfies the experimental requirements for integrating optical superlattices with a quantum gas microscope.
Quantum gas microscopy has enabled the study on intriguing properties of ultracold atoms in optical lattices. It provides the cutting-edge technology for manipulating quantum many-body systems. In such experiments, atoms have to be prepared into a two-dimensional (2D) system for being resolved by microscopes with limited depth of focus. Here we report an experiment on slicing a single layer of the atoms trapped in a few layers of pancake-shaped optical traps to create a 2D system. This technique is implemented with a microwave “knife”, i.e., a microwave field with a frequency defined by the resonant condition with the Zeeman-shifted atomic levels related to a gradient magnetic field. It is crucial to keep a stable preparation of the desired layer to create the 2D quantum gas for future experimental applications. To achieve this, the most important point is to provide a gradient magnetic field with low noises and slow drift in combination with a properly optimized microwave pulse. Monitoring the electric current source and the environmental magnetic field, we applied an actively stabilizing circuit and realized a field drift of 0.042(3) mG/hour. This guarantees creating the single layer of atoms with an efficiency of 99.92(3)% while atoms are hardly seen in other layers within 48 hours, satisfying future experimental demands on studying quantum many-body physics.
Lasers are imperative in quantum simulation experiments to trap and cool atoms. With the growing complexity of experimental setups, precise control and stability of the position and exotic shape of lasers have become essential for high-fidelity operations. However, disturbances such as temperature fluctuations, mechanical vibrations, deformation of materials, and acoustic noise pose challenges to fulfill these requirements. In this paper, we propose and evaluate the first system for stabilizing the laser's beam position using two high-resolution cameras with high frame-rates, and image processing in a field-programmable gate array (FPGA) with low latency and subsequent in-loop feedback to the laser control. The proposed image processing hardware extracts the Gaussian beam distribution from two 5 MP cameras at 47 fps and 435 ns latency. These are fed to four proportional-integral-derivative (PID) controllers implemented on the FPGA. The PID modules provide feedback through parallel digital-to-analog converter (DAC) channels for steering mirrors to stabilize the beam within 5 µm accuracy. Using two cameras at distinct sample distances on the optical axis allows for controlling the incidence angle of the laser beam onto the image planes. The current system is a building block for future extensions allowing real-time phase-feedback on optical lattices, stabilization of independent optical tweezers in an array, and focus position stabilization of transverse electromagnetic (e.g. TEM01) modes enabling large-scale quantum simulations.
Single-site-resolved addressing offers an unprecedented capability of manipulating atoms in optical lattices. We demonstrate a robust site-resolved addressing by locking the position of the addressing beam to the optical lattice phase. The addressing beam is modulated by a digital micromirror device (DMD) integrated into a quantum gas microscope (QGM). A typical experiment with ultracold atoms takes several hours to collect hundreds of samples by repeating the sequence of programmed operations, whose duration is 40 seconds. During the collection, the phase of optical lattices can drift over a few lattice sites. According to the phases of the lattice obtained from the current experimental realizations, we correct the addressing beam position for the subsequent realization by shifting the pattern of the activated micromirrors on the DMD. This feedback loop is compiled to an application with a graphical user interface (GUI) for relevant devices, which is synchronized to the experimental sequence. The long-term (5 hours) position deviation between the pointing of the addressing beam and the lattice phase is suppressed to a 0.02(2)/0.02(2) lattice spacing in the X/Y direction, verifying a 10-fold reduction in comparison to that without feedback. With the help of phase-locking, the success rate of site-resolved addressing is improved substantially from 60(7)% to 95(2)%.