Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1806.04750 · Physical review. B./Physical review. B

Quantum Monte Carlo calculations of energy gaps from first principles

R. J. Hunt, Marcin Szyniszewski, Genki I. Prayogo, Ryo Maezono, N. D. Drummond

Published Aug 13, 2018• 53 citations
arXivHTMLPDF

Abstract

We review the use of continuum quantum Monte Carlo (QMC) methods for the calculation of energy gaps from first principles, and present a broad set of excited-state calculations carried out with the variational and fixed-node diffusion QMC methods on atoms, molecules, and solids. We propose a finite-size-error correction scheme for bulk energy gaps calculated in finite cells subject to periodic boundary conditions. We show that finite-size effects are qualitatively different in two-dimensional materials, demonstrating the effect in a QMC calculation of the band gap and exciton binding energy of monolayer phosphorene. We investigate the fixed-node errors in diffusion Monte Carlo gaps evaluated with Slater-Jastrow trial wave functions by examining the effects of backflow transformations, and also by considering the formation of restricted multideterminant expansions for excited-state wave functions. For several molecules, we examine the importance of structural relaxation in the excited state in determining excited-state energies. We study the feasibility of using variational Monte Carlo with backflow correlations to obtain accurate excited-state energies at reduced computational cost, finding that this approach can be valid. We find that diffusion Monte Carlo gap calculations can be performed with much larger time steps than are typically required to converge the total energy, at significantly diminished computational expense, but that in order to alleviate fixed-node errors in calculations on solids the inclusion of backflow correlations is sometimes necessary.

DOI
10.1103/physrevb.98.075122

Related papers

A quantum Monte Carlo study of the two-dimensional electron gas

Yongkyung Kwon

Quantum Monte Carlo has recently made great progress as a computational tool for quantum many-body systems. We have extended previous Monte Carlo methods to study both ground state and excited states of the two-dimensional electron gas. For ground state properties we have used variational and fixed-node diffusion Monte Carlo methods, the latter of which is a nearly exact method for a system of many fermions. With introduction of backflow and three-body correlations, we find significant improvements in both variational and fixed-node energies over the Slater-Jastrow results which consider only two-body correlations. It is found that the backflow effect is dominant over the three-body effect at high density ($r\sb{s} \sim 1)$ while they are of equal importance at the lowest density considered $(r\sb{s} \sim 20)$. The effects are comparable to those in bulk $\sp3$He. The numerical results are used to provide an analytic expression for the correlation energy of the two-dimensional electron gas as a function of the density. For particle-hole excitations of the system, variational Monte Carlo is employed. Correlated sampling is introduced to calculate small energy differences between different excitations. The usual pair-product (Slater-Jastrow) trial wave function is found to lack certain correlations entirely so that backflow correlation is crucial. From the excitation energies calculated here, we determine Fermi liquid parameters and related physical quantities such as the effective mass and Lande g factor of the two-dimensional electron gas, which are compared with previous analytic calculations. Finally, the validity of our fixed-node calculations for the ground state and variational ones for the excitations is tested by transient-estimate calculations, which allow for relaxation of the fixed-node conditions.

•Jan 1, 1994•0 citations

Electronic structure quantum Monte Carlo

Michal Bajdich, Luboš Mitáš

Electronic structure quantum Monte Carlo Quantum Monte Carlo (QMC) is an advanced simulation methodology for studies of manybody quantum systems. The QMC approaches combine analytical insights with stochastic computational techniques for efficient solution of several classes of important many-body problems such as the stationary Schrödinger equation. QMC methods of various flavors have been applied to a great variety of systems spanning continuous and lattice quantum models, molecular and condensed systems, BEC-BCS ultracold condensates, nuclei, etc. In this review, we focus on the electronic structure QMC, i.e., methods relevant for systems described by the electron-ion Hamiltonians. Some of the key QMC achievements include direct treatment of electron correlation, accuracy in predicting energy differences and favorable scaling in the system size. Calculations of atoms, molecules, clusters and solids have demonstrated QMC applicability to real systems with hundreds of electrons while providing 90-95% of the correlation energy and energy differences typically within a few percent of experiments. Advances in accuracy beyond these limits are hampered by the so-called fixed-node approximation which is used to circumvent the notorious fermion sign problem. Many-body nodes of fermion states and their properties have therefore become one of the important topics for further progress in predictive power and efficiency of QMC calculations. Some of our recent results on the wave function nodes and related nodal domain topologies will be briefly reviewed. This includes analysis of few-electron systems and descriptions of exact and approximate nodes using transformations and projections of the highly-dimensional nodal hypersurfaces into the 3D space. Studies of fermion nodes offer new insights into topological properties of eigenstates such as explicit demonstrations that generic fermionic ground states exhibit the minimal number of two nodal domains. Recently proposed trial wave functions based on Pfaffians with pairing orbitals are presented and their nodal properties are tested in calculations of first row atoms and molecules. Finally, backflow "dressed" coordinates are introduced as another possibility for capturing correlation effects and for decreasing the fixed-node bias.

arXiv:1008.2369•Acta Physica Slovaca Reviews and Tutorials•Apr 1, 2009•36 citations

Systematic comparison and cross-validation of fixed-node diffusion Monte Carlo and phaseless auxiliary-field quantum Monte Carlo in solids

Fionn D. Malone, Anouar Benali, Miguel A. Morales +3 more

Quantum Monte Carlo (QMC) methods are some of the most accurate methods for simulating correlated electronic systems. We investigate the compatibility, strengths, and weaknesses of two such methods, namely, diffusion Monte Carlo (DMC) and auxiliary-field quantum Monte Carlo (AFQMC). The multideterminant trial wave functions employed in both approaches are generated using the configuration interaction using a perturbative selection made iteratively (CIPSI) technique. Complete basis-set full configuration interaction energies estimated with CIPSI are used as a reference in this comparative study between DMC and AFQMC. By focusing on a set of canonical finite--size solid-state systems, we show that both QMC methods can be made to systematically converge towards the same energy once basis-set effects and systematic biases have been removed. AFQMC shows a much smaller dependence on the trial wave function than DMC while simultaneously exhibiting a much larger basis-set dependence. We outline some of the remaining challenges and opportunities for improving these approaches.

arXiv:2007.05587•Physical review. B./Physical review. B•Oct 7, 2020•28 citations

Backflow and pairing wave function for quantum Monte Carlo methods

Pablo López Ríos

Quantum Monte Carlo (QMC) methods are a class of stochastic techniques that can be used to compute the properties of electronic systems accurately from first principles. This thesis is mainly concerned with the development of trial wave functions for QMC. An extension of the backflow transformation to inhomogeneous electronic systems is presented and applied to atoms, molecules and extended systems. The backflow transformation I have developed typically retrieves an additional 50% of the remaining correlation energy at the variational Monte Carlo level, and 30% at the diffusion Monte Carlo level; the number of parameters required to achieve a given fraction of the correlation energy does not appear to increase with system size. The expense incurred by the use of backflow transformations is investigated, and it is found to scale favourably with system size. Additionally, I propose a single wave function form for studying the electron-hole system which includes pairing effects and is capable of describing all of the relevant phases of this system. The effectiveness of this general wave function is demonstrated by applying it to a particular transition between two phases of the symmetric electron-hole bilayer, and it is found that using a single wave function form gives a more accurate physical description of the system than using a different wave function to describe each phase. Both of these developments are new, and they provide a powerful set of tools for designing accurate wave functions. Backflow transformations are particularly important for systems with repulsive interactions, while pairing wave functions are important for attractive interactions. It is possible to combine backflow and pairing to further increase the accuracy of the wave function. The wave function technology that I have developed should therefore be useful across a very wide range of problems.

•Oct 2, 2006•4 citations

Multideterminant Wave Functions in Quantum Monte Carlo

Miguel A. Morales, Jeremy McMinis, Bryan K. Clark +2 more

Quantum Monte Carlo (QMC) methods have received considerable attention over past decades due to their great promise for providing a direct solution to the many-body Schrodinger equation in electronic systems. Thanks to their low scaling with the number of particles, QMC methods present a compelling competitive alternative for the accurate study of large molecular systems and solid state calculations. In spite of such promise, the method has not permeated the quantum chemistry community broadly, mainly because of the fixed-node error, which can be large and whose control is difficult. In this Perspective, we present a systematic application of large scale multideterminant expansions in QMC and report on its impressive performance with first row dimers and the 55 molecules of the G1 test set. We demonstrate the potential of this strategy for systematically reducing the fixed-node error in the wave function and for achieving chemical accuracy in energy predictions. When compared to traditional quantum chemistry methods like MP2, CCSD(T), and various DFT approximations, the QMC results show a marked improvement over all of them. In fact, only the explicitly correlated CCSD(T) method with a large basis set produces more accurate results. Further developments in trial wave functions and algorithmic improvements appear promising for rendering QMC as the benchmark standard in large electronic systems.

arXiv:1303.6676•Journal of Chemical Theory and Computation•Jun 15, 2012•143 citations

FIXED-NODE QUANTUM MONTE CARLO FOR CHEMISTRY

Michel Caffarel, Alejandro Ramírez-Solís

In this paper we discuss the application of quantum Monte Carlo (QMC) techniques to the electronic many-body problem as encountered in computational chemistry. The Fixed-Node Diffusion Monte Carlo (FN-DMC) algorithm —the most common QMC scheme for treating molecules—is presented. The impact of the fixed-node error is illustrated through numerical applications including the calculation of the electronic affinity of the chlorine atom, the dissociation barrier of the O 4 molecule, and the binding energy of the dichromium molecule, Cr 2 . Although total energies calculated with FN-DMC are very accurate (more accurate than the best alternative methods available), it is emphasized that the error associated with approximate nodes can lead to important errors in the small differences of total energies, quantities which are particularly important in chemistry.

Recent Progress in Many-Body Theories•Jun 1, 2008•2 citations
We review the use of continuum quantum Monte Carlo (QMC) methods for the calculation of energy gaps from first principles, and present a broad set of excited-state calculations carried out with the variational and fixed-node diffusion QMC methods on atoms, molecules, and solids. We propose a finite-size-error correction scheme for bulk energy gaps calculated in finite cells subject to periodic boundary conditions. We show that finite-size effects are qualitatively different in two-dimensional materials, demonstrating the effect in a QMC calculation of the band gap and exciton binding energy of monolayer phosphorene. We investigate the fixed-node errors in diffusion Monte Carlo gaps evaluated with Slater-Jastrow trial wave functions by examining the effects of backflow transformations, and also by considering the formation of restricted multideterminant expansions for excited-state wave functions. For several molecules, we examine the importance of structural relaxation in the excited state in determining excited-state energies. We study the feasibility of using variational Monte Carlo with backflow correlations to obtain accurate excited-state energies at reduced computational cost, finding that this approach can be valid. We find that diffusion Monte Carlo gap calculations can be performed with much larger time steps than are typically required to converge the total energy, at significantly diminished computational expense, but that in order to alleviate fixed-node errors in calculations on solids the inclusion of backflow correlations is sometimes necessary.
Quantum Monte Carlo has recently made great progress as a computational tool for quantum many-body systems. We have extended previous Monte Carlo methods to study both ground state and excited states of the two-dimensional electron gas. For ground state properties we have used variational and fixed-node diffusion Monte Carlo methods, the latter of which is a nearly exact method for a system of many fermions. With introduction of backflow and three-body correlations, we find significant improvements in both variational and fixed-node energies over the Slater-Jastrow results which consider only two-body correlations. It is found that the backflow effect is dominant over the three-body effect at high density ($r\sb{s} \sim 1)$ while they are of equal importance at the lowest density considered $(r\sb{s} \sim 20)$. The effects are comparable to those in bulk $\sp3$He. The numerical results are used to provide an analytic expression for the correlation energy of the two-dimensional electron gas as a function of the density. For particle-hole excitations of the system, variational Monte Carlo is employed. Correlated sampling is introduced to calculate small energy differences between different excitations. The usual pair-product (Slater-Jastrow) trial wave function is found to lack certain correlations entirely so that backflow correlation is crucial. From the excitation energies calculated here, we determine Fermi liquid parameters and related physical quantities such as the effective mass and Lande g factor of the two-dimensional electron gas, which are compared with previous analytic calculations. Finally, the validity of our fixed-node calculations for the ground state and variational ones for the excitations is tested by transient-estimate calculations, which allow for relaxation of the fixed-node conditions.
Electronic structure quantum Monte Carlo Quantum Monte Carlo (QMC) is an advanced simulation methodology for studies of manybody quantum systems. The QMC approaches combine analytical insights with stochastic computational techniques for efficient solution of several classes of important many-body problems such as the stationary Schrödinger equation. QMC methods of various flavors have been applied to a great variety of systems spanning continuous and lattice quantum models, molecular and condensed systems, BEC-BCS ultracold condensates, nuclei, etc. In this review, we focus on the electronic structure QMC, i.e., methods relevant for systems described by the electron-ion Hamiltonians. Some of the key QMC achievements include direct treatment of electron correlation, accuracy in predicting energy differences and favorable scaling in the system size. Calculations of atoms, molecules, clusters and solids have demonstrated QMC applicability to real systems with hundreds of electrons while providing 90-95% of the correlation energy and energy differences typically within a few percent of experiments. Advances in accuracy beyond these limits are hampered by the so-called fixed-node approximation which is used to circumvent the notorious fermion sign problem. Many-body nodes of fermion states and their properties have therefore become one of the important topics for further progress in predictive power and efficiency of QMC calculations. Some of our recent results on the wave function nodes and related nodal domain topologies will be briefly reviewed. This includes analysis of few-electron systems and descriptions of exact and approximate nodes using transformations and projections of the highly-dimensional nodal hypersurfaces into the 3D space. Studies of fermion nodes offer new insights into topological properties of eigenstates such as explicit demonstrations that generic fermionic ground states exhibit the minimal number of two nodal domains. Recently proposed trial wave functions based on Pfaffians with pairing orbitals are presented and their nodal properties are tested in calculations of first row atoms and molecules. Finally, backflow "dressed" coordinates are introduced as another possibility for capturing correlation effects and for decreasing the fixed-node bias.
Quantum Monte Carlo (QMC) methods are some of the most accurate methods for simulating correlated electronic systems. We investigate the compatibility, strengths, and weaknesses of two such methods, namely, diffusion Monte Carlo (DMC) and auxiliary-field quantum Monte Carlo (AFQMC). The multideterminant trial wave functions employed in both approaches are generated using the configuration interaction using a perturbative selection made iteratively (CIPSI) technique. Complete basis-set full configuration interaction energies estimated with CIPSI are used as a reference in this comparative study between DMC and AFQMC. By focusing on a set of canonical finite--size solid-state systems, we show that both QMC methods can be made to systematically converge towards the same energy once basis-set effects and systematic biases have been removed. AFQMC shows a much smaller dependence on the trial wave function than DMC while simultaneously exhibiting a much larger basis-set dependence. We outline some of the remaining challenges and opportunities for improving these approaches.
Quantum Monte Carlo (QMC) methods are a class of stochastic techniques that can be used to compute the properties of electronic systems accurately from first principles. This thesis is mainly concerned with the development of trial wave functions for QMC. An extension of the backflow transformation to inhomogeneous electronic systems is presented and applied to atoms, molecules and extended systems. The backflow transformation I have developed typically retrieves an additional 50% of the remaining correlation energy at the variational Monte Carlo level, and 30% at the diffusion Monte Carlo level; the number of parameters required to achieve a given fraction of the correlation energy does not appear to increase with system size. The expense incurred by the use of backflow transformations is investigated, and it is found to scale favourably with system size. Additionally, I propose a single wave function form for studying the electron-hole system which includes pairing effects and is capable of describing all of the relevant phases of this system. The effectiveness of this general wave function is demonstrated by applying it to a particular transition between two phases of the symmetric electron-hole bilayer, and it is found that using a single wave function form gives a more accurate physical description of the system than using a different wave function to describe each phase. Both of these developments are new, and they provide a powerful set of tools for designing accurate wave functions. Backflow transformations are particularly important for systems with repulsive interactions, while pairing wave functions are important for attractive interactions. It is possible to combine backflow and pairing to further increase the accuracy of the wave function. The wave function technology that I have developed should therefore be useful across a very wide range of problems.
Quantum Monte Carlo (QMC) methods have received considerable attention over past decades due to their great promise for providing a direct solution to the many-body Schrodinger equation in electronic systems. Thanks to their low scaling with the number of particles, QMC methods present a compelling competitive alternative for the accurate study of large molecular systems and solid state calculations. In spite of such promise, the method has not permeated the quantum chemistry community broadly, mainly because of the fixed-node error, which can be large and whose control is difficult. In this Perspective, we present a systematic application of large scale multideterminant expansions in QMC and report on its impressive performance with first row dimers and the 55 molecules of the G1 test set. We demonstrate the potential of this strategy for systematically reducing the fixed-node error in the wave function and for achieving chemical accuracy in energy predictions. When compared to traditional quantum chemistry methods like MP2, CCSD(T), and various DFT approximations, the QMC results show a marked improvement over all of them. In fact, only the explicitly correlated CCSD(T) method with a large basis set produces more accurate results. Further developments in trial wave functions and algorithmic improvements appear promising for rendering QMC as the benchmark standard in large electronic systems.
In this paper we discuss the application of quantum Monte Carlo (QMC) techniques to the electronic many-body problem as encountered in computational chemistry. The Fixed-Node Diffusion Monte Carlo (FN-DMC) algorithm —the most common QMC scheme for treating molecules—is presented. The impact of the fixed-node error is illustrated through numerical applications including the calculation of the electronic affinity of the chlorine atom, the dissociation barrier of the O 4 molecule, and the binding energy of the dichromium molecule, Cr 2 . Although total energies calculated with FN-DMC are very accurate (more accurate than the best alternative methods available), it is emphasized that the error associated with approximate nodes can lead to important errors in the small differences of total energies, quantities which are particularly important in chemistry.