Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1806.02858 · Physical Review A

High-fidelity and robust two-qubit gates for quantum-dot spin qubits in silicon

Chia-Hsien Huang, Chih Hwan Yang, Chien-Chang Chen, Andrew S. Dzurak, Hsi‐Sheng Goan

Published Apr 4, 2019• 19 citations
arXivHTMLPDF

Abstract

A two-qubit controlled-not (cnot) gate, realized by a controlled-phase (C-phase) gate combined with single-qubit gates, has been experimentally implemented recently for quantum-dot spin qubits in isotopically enriched silicon, a promising solid-state system for practical quantum computation. In the experiments, the single-qubit gates have been demonstrated with fault-tolerant control fidelity, but the infidelity of the two-qubit C-phase gate is, primarily due to the electrical noise, still higher than the required error threshold for fault-tolerant quantum computation (FTQC). Here, by taking the realistic system parameters and the experimental constraints on the control pulses into account, we construct experimentally realizable high-fidelity cnot gates robust against electrical noise with the experimentally measured $1/{f}^{1.01}$ noise spectrum and also against the uncertainty in the interdot tunnel coupling amplitude. Our fine-tuned optimal cnot gate has about two orders of magnitude improvement in gate infidelity over the ideal C-phase gate constructed without considering any noise effect. Furthermore, within the same control framework, high-fidelity and robust single-qubit gates can also be constructed, paving the way for large-scale FTQC.

DOI
10.1103/physreva.99.042310

Related papers

Fast high-fidelity entangling gates for spin qubits in Si double quantum dots

F. A. Calderon-Vargas, George S. Barron, Xiu–Hao Deng +3 more

Implementing high-fidelity two-qubit gates in single-electron spin qubits in silicon double quantum dots is still a major challenge. In this work we employ analytical methods to design control pulses that generate high-fidelity entangling gates for quantum computers based on this platform. Using realistic parameters and initially assuming a noise-free environment, we present simple control pulses that generate cnot, cphase, and cz gates with average fidelities greater than 99.99% and gate times as short as 45 ns. Moreover, using the local invariants of the system's evolution operator, we show that a simple square pulse generates a cnot gate in less than 27 ns and with a fidelity greater than 99.99%. Last, we use the same analytical methods to generate two-qubit gates locally equivalent to $\sqrt{\mathrm{CNOT}}$ and $\sqrt{\mathrm{CZ}}$ that are used to implement simple two-piece pulse sequences that produce high-fidelity cnot and cz gates in the presence of low-frequency noise.

arXiv:1902.02350•Physical review. B./Physical review. B•Jul 9, 2019•35 citations

Robust two-qubit gates in silicon double quantum dots with composite pulses and optimized exchange control

Rui Yu, Haoxuan Chen, Chenyi He +2 more

Abstract Robust two-qubit gates are essential for scalable silicon spin qubits, but their fidelities are limited by microwave-control imperfections and charge-noise-induced exchange fluctuations. We propose a practical scheme for robust controlled-Z (CZ) and controlled-NOT (CNOT) gates in a silicon double quantum dot. By applying a transverse microwave drive, the effective Hamiltonian can be decomposed into two driven subspaces. In the subspace mainly controlled by the microwave field, a Broadband 1 (BB1) composite pulse is used to suppress errors in the microwave amplitude. In the exchange-assisted subspace, the microwave phases and durations are kept fixed, while a few piecewise-constant exchange amplitudes are optimized by a GRAPE-like procedure. This design reduces the sensitivity to both microwave-amplitude and exchange-amplitude errors while keeping the control waveform simple and experimentally friendly. Numerical simulations show that the optimized CNOT gate reaches a fidelity above 99.99% under experimentally relevant noise strengths, and the CZ gate also maintains a fidelity above 99.9%. These results indicate that combining composite pulses with optimized exchange control provides an experimentally feasible route to robust two-qubit gates in silicon spin qubits.

Chinese Physics B•Aug 28, 2026•0 citations

Robust controlled-NOT gate in the presence of large fabrication-induced variations of the exchange interaction strength

Matthew J. Testolin, Charles D. Hill, Cameron J. Wellard +1 more

We demonstrate how using two-qubit composite rotations a high fidelity controlled-NOT (CNOT) gate can be constructed, even when the strength of the interaction between qubits is not accurately known. We focus on the exchange interaction oscillation in silicon based solid-state architectures with a Heisenberg Hamiltonian. This method easily applies to a general two-qubit Hamiltonian. We show how the robust CNOT gate can achieve a very high fidelity when a single application of the composite rotations is combined with a modest level of Hamiltonian characterization. Operating the robust CNOT gate in a suitably characterized system means concatenation of the composite pulse is unnecessary, hence reducing operation time, and ensuring the gate operates below the threshold required for fault-tolerant quantum computation.

arXiv:quant-ph/0701165•Physical Review A•Jul 3, 2007•29 citations

Geometric two-qubit gates in silicon-based double quantum dots

Yong-Yang Lu, Kejin Wei, Chengxian Zhang

Achieving high-fidelity two-qubit gates is crucial for spin qubits in silicon-based double quantum dots. However, these gates are sensitive to charge noise in experimental settings, which remains a significant challenge. Geometric gates, which utilize pure geometric phases for gate operations, are a promising approach to achieving robust control. In this work, we theoretically propose a feasible strategy to implement geometric two-qubit gates for silicon-based spin qubits considering experimental control environments. By operating in the suitable region where the local magnetic field gradient is significantly larger than the exchange interaction, we can implement both entangling and nonentangling geometric gates through analytical and numerical methods. It is found that the geometric gates obtained are highly compatible with existing experimental techniques using electric dipole spin resonance in silicon. Moreover, the implemented geometric controlled-$Z$ (CZ) gates can achieve fidelities exceeding 99% under experimental noise levels and the gate times are as short as 20 ns. Our work paves the way for the realization of high-fidelity geometric two-qubit gates for spin qubits in silicon.

arXiv:2409.00601•Physical Review A•Apr 10, 2025•7 citations

High-fidelity single- and two-qubit gates for two-electron spin qubits

Pascal Cerfontaine

A key ingredient for fault-tolerant quantum computers are sufficiently accurate logic gates on single and multiple qubits in the presence of decohering noise. In this thesis, we theoretically develop and experimentally demonstrate such high-fidelity quantum gates for semiconductor-based quantum computing. Specifically, we consider a qubit encoded in the singlet and one triplet state of two electron spins in GaAs. While its potential for optical coupling makes GaAs an attractive material, highly auto-correlated magnetic field noise from fluctuating nuclear spins leads to considerably lower coherence times than for Si-based devices, where nuclear spins can be removed by isotopic purification. In addition to noise, the control methods used in earlier experiments are based on unrealistic approximations. For these reasons, fidelities well above 99 %, as required by current quantum error correction (QEC) schemes, have not been obtained before this thesis. To tackle these issues, we extend the filter function formalism to describe quantum gates and processes in the presence of experimentally relevant non-Markovian noise. Since this formalism can consider all relevant noise sources in a computationally efficient manner, it can be used to find optimal control pulses by numerical optimization, leading to predicted single-qubit gate fidelities of 99.9 %. Furthermore, we deal with the considerable control challenges associated with this qubit type by experimental calibration of the optimized control pulses. To this end, we extend our previous experimental gate set calibration (GSC) routine to remove systematic gate errors on an arbitrary number of qubits. We apply the numerically optimized single-qubit control pulses to our GaAs sample and experimentally calibrate them with GSC. This procedure yields an average gate fidelity of 99.50 ± 0.04 % and a low leakage rate of 0.13 ± 0.03 % out of the computational subspace, characterized by randomized benchmarking. We also optimize realistic two-qubit control pulses, considering current control hardware as well as interqubit Coulomb and exchange coupling that cannot be fully turned off. Using measured noise spectra, we show that two-qubit gate fidelities of 99.90 % can be reached in GaAs, while 99.99 % can be achieved in Si. These results demonstrate that high-fidelity gates can be realized even in the presence of nuclear spins as in GaAs.

•Jan 1, 2019•1 citation

Resonantly driven CNOT gate for electron spins

D. M. Zajac, Anthony J. Sigillito, Maximilian Rimbach-Russ +4 more

Single-qubit rotations and two-qubit CNOT operations are crucial ingredients for universal quantum computing. Although high-fidelity single-qubit operations have been achieved using the electron spin degree of freedom, realizing a robust CNOT gate has been challenging because of rapid nuclear spin dephasing and charge noise. We demonstrate an efficient resonantly driven CNOT gate for electron spins in silicon. Our platform achieves single-qubit rotations with fidelities greater than 99%, as verified by randomized benchmarking. Gate control of the exchange coupling allows a quantum CNOT gate to be implemented with resonant driving in ~200 nanoseconds. We used the CNOT gate to generate a Bell state with 78% fidelity (corrected for errors in state preparation and measurement). Our quantum dot device architecture enables multi-qubit algorithms in silicon.

arXiv:1708.03530•Science•Dec 7, 2017•560 citations
A two-qubit controlled-not (cnot) gate, realized by a controlled-phase (C-phase) gate combined with single-qubit gates, has been experimentally implemented recently for quantum-dot spin qubits in isotopically enriched silicon, a promising solid-state system for practical quantum computation. In the experiments, the single-qubit gates have been demonstrated with fault-tolerant control fidelity, but the infidelity of the two-qubit C-phase gate is, primarily due to the electrical noise, still higher than the required error threshold for fault-tolerant quantum computation (FTQC). Here, by taking the realistic system parameters and the experimental constraints on the control pulses into account, we construct experimentally realizable high-fidelity cnot gates robust against electrical noise with the experimentally measured 1/f1.011/{f}^{1.01}1/f1.01 noise spectrum and also against the uncertainty in the interdot tunnel coupling amplitude. Our fine-tuned optimal cnot gate has about two orders of magnitude improvement in gate infidelity over the ideal C-phase gate constructed without considering any noise effect. Furthermore, within the same control framework, high-fidelity and robust single-qubit gates can also be constructed, paving the way for large-scale FTQC.
Implementing high-fidelity two-qubit gates in single-electron spin qubits in silicon double quantum dots is still a major challenge. In this work we employ analytical methods to design control pulses that generate high-fidelity entangling gates for quantum computers based on this platform. Using realistic parameters and initially assuming a noise-free environment, we present simple control pulses that generate cnot, cphase, and cz gates with average fidelities greater than 99.99% and gate times as short as 45 ns. Moreover, using the local invariants of the system's evolution operator, we show that a simple square pulse generates a cnot gate in less than 27 ns and with a fidelity greater than 99.99%. Last, we use the same analytical methods to generate two-qubit gates locally equivalent to CNOT\sqrt{\mathrm{CNOT}}CNOT​ and CZ\sqrt{\mathrm{CZ}}CZ​ that are used to implement simple two-piece pulse sequences that produce high-fidelity cnot and cz gates in the presence of low-frequency noise.
Abstract Robust two-qubit gates are essential for scalable silicon spin qubits, but their fidelities are limited by microwave-control imperfections and charge-noise-induced exchange fluctuations. We propose a practical scheme for robust controlled-Z (CZ) and controlled-NOT (CNOT) gates in a silicon double quantum dot. By applying a transverse microwave drive, the effective Hamiltonian can be decomposed into two driven subspaces. In the subspace mainly controlled by the microwave field, a Broadband 1 (BB1) composite pulse is used to suppress errors in the microwave amplitude. In the exchange-assisted subspace, the microwave phases and durations are kept fixed, while a few piecewise-constant exchange amplitudes are optimized by a GRAPE-like procedure. This design reduces the sensitivity to both microwave-amplitude and exchange-amplitude errors while keeping the control waveform simple and experimentally friendly. Numerical simulations show that the optimized CNOT gate reaches a fidelity above 99.99% under experimentally relevant noise strengths, and the CZ gate also maintains a fidelity above 99.9%. These results indicate that combining composite pulses with optimized exchange control provides an experimentally feasible route to robust two-qubit gates in silicon spin qubits.
We demonstrate how using two-qubit composite rotations a high fidelity controlled-NOT (CNOT) gate can be constructed, even when the strength of the interaction between qubits is not accurately known. We focus on the exchange interaction oscillation in silicon based solid-state architectures with a Heisenberg Hamiltonian. This method easily applies to a general two-qubit Hamiltonian. We show how the robust CNOT gate can achieve a very high fidelity when a single application of the composite rotations is combined with a modest level of Hamiltonian characterization. Operating the robust CNOT gate in a suitably characterized system means concatenation of the composite pulse is unnecessary, hence reducing operation time, and ensuring the gate operates below the threshold required for fault-tolerant quantum computation.
Achieving high-fidelity two-qubit gates is crucial for spin qubits in silicon-based double quantum dots. However, these gates are sensitive to charge noise in experimental settings, which remains a significant challenge. Geometric gates, which utilize pure geometric phases for gate operations, are a promising approach to achieving robust control. In this work, we theoretically propose a feasible strategy to implement geometric two-qubit gates for silicon-based spin qubits considering experimental control environments. By operating in the suitable region where the local magnetic field gradient is significantly larger than the exchange interaction, we can implement both entangling and nonentangling geometric gates through analytical and numerical methods. It is found that the geometric gates obtained are highly compatible with existing experimental techniques using electric dipole spin resonance in silicon. Moreover, the implemented geometric controlled-ZZZ (CZ) gates can achieve fidelities exceeding 99% under experimental noise levels and the gate times are as short as 20 ns. Our work paves the way for the realization of high-fidelity geometric two-qubit gates for spin qubits in silicon.
A key ingredient for fault-tolerant quantum computers are sufficiently accurate logic gates on single and multiple qubits in the presence of decohering noise. In this thesis, we theoretically develop and experimentally demonstrate such high-fidelity quantum gates for semiconductor-based quantum computing. Specifically, we consider a qubit encoded in the singlet and one triplet state of two electron spins in GaAs. While its potential for optical coupling makes GaAs an attractive material, highly auto-correlated magnetic field noise from fluctuating nuclear spins leads to considerably lower coherence times than for Si-based devices, where nuclear spins can be removed by isotopic purification. In addition to noise, the control methods used in earlier experiments are based on unrealistic approximations. For these reasons, fidelities well above 99 %, as required by current quantum error correction (QEC) schemes, have not been obtained before this thesis. To tackle these issues, we extend the filter function formalism to describe quantum gates and processes in the presence of experimentally relevant non-Markovian noise. Since this formalism can consider all relevant noise sources in a computationally efficient manner, it can be used to find optimal control pulses by numerical optimization, leading to predicted single-qubit gate fidelities of 99.9 %. Furthermore, we deal with the considerable control challenges associated with this qubit type by experimental calibration of the optimized control pulses. To this end, we extend our previous experimental gate set calibration (GSC) routine to remove systematic gate errors on an arbitrary number of qubits. We apply the numerically optimized single-qubit control pulses to our GaAs sample and experimentally calibrate them with GSC. This procedure yields an average gate fidelity of 99.50 ± 0.04 % and a low leakage rate of 0.13 ± 0.03 % out of the computational subspace, characterized by randomized benchmarking. We also optimize realistic two-qubit control pulses, considering current control hardware as well as interqubit Coulomb and exchange coupling that cannot be fully turned off. Using measured noise spectra, we show that two-qubit gate fidelities of 99.90 % can be reached in GaAs, while 99.99 % can be achieved in Si. These results demonstrate that high-fidelity gates can be realized even in the presence of nuclear spins as in GaAs.
Single-qubit rotations and two-qubit CNOT operations are crucial ingredients for universal quantum computing. Although high-fidelity single-qubit operations have been achieved using the electron spin degree of freedom, realizing a robust CNOT gate has been challenging because of rapid nuclear spin dephasing and charge noise. We demonstrate an efficient resonantly driven CNOT gate for electron spins in silicon. Our platform achieves single-qubit rotations with fidelities greater than 99%, as verified by randomized benchmarking. Gate control of the exchange coupling allows a quantum CNOT gate to be implemented with resonant driving in ~200 nanoseconds. We used the CNOT gate to generate a Bell state with 78% fidelity (corrected for errors in state preparation and measurement). Our quantum dot device architecture enables multi-qubit algorithms in silicon.