Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1805.01080 · Optics Express

High-performance Raman memory with spatio-temporal reversal

Pierre Vernaz-Gris, Aaron D. Tranter, Jesse L. Everett, Anthony C. Leung, Karun Paul, Geoff Campbell, Ping Koy Lam, B. C. Buchler

Published May 1, 2018• 15 citations
arXivHTMLPDF

Abstract

A number of techniques exist to use an ensemble of atoms as a quantum memory for light. Many of these propose to use backward retrieval as a way to improve the storage and recall efficiency. We report on a demonstration of an off-resonant Raman memory that uses backward retrieval to achieve an efficiency of 65 ± 6% at a storage time of one pulse duration. The memory has a characteristic decay time of 60 μs, corresponding to a delay-bandwidth product of 160.

DOI
10.1364/oe.26.012424

Related papers

Broadband optical quantum memory

Reim, Klaus Franz

This thesis is about the experimental implementation of a high-speed and robust quantum memory for light. A novel far off-resonant Raman approach to ensemble-based quantum memories in a room-temperature environment is developed and demonstrated. Storage and retrieval of sub-nanosecond, weak coherent light pulses at the single-photon-level with total efficiencies exceeding 30% and storage times of up to 4 μs are achieved. The coherence of the memory is shown by directly interfering a copy of the incident signal with the retrieved signal from the memory. The unconditional noise floor of the memory is found to be low enough to operate the memory in the quantum regime at room temperature. Multiple readout of a single stored excitation is demonstrated, suggesting that 100% readout is possible in different temporal modes. Furthermore, first results regarding the storage and retrieval of polarisation encoded qubits are obtained. This and the memory’s ability to operate in the quantum regime at room temperature with a low unconditional noise floor illustrate its potential usefulness for real world applications.

•Jan 1, 2011•2 citations

Broadband optical quantum memory

Ian A. Walmsley

This thesis is about the experimental implementation of a high-speed and robust quantum memory for light. A novel far off-resonant Raman approach to ensemble-based quantum memories in a room-temperature environment is developed and demonstrated. Storage and retrieval of sub-nanosecond, weak coherent light pulses at the single-photon-level with total efficiencies exceeding 30% and storage times of up to 4 μs are achieved. The coherence of the memory is shown by directly interfering a copy of the incident signal with the retrieved signal from the memory. The unconditional noise floor of the memory is found to be low enough to operate the memory in the quantum regime at room temperature. Multiple readout of a single stored excitation is demonstrated, suggesting that 100% readout is possible in different temporal modes. Furthermore, first results regarding the storage and retrieval of polarisation encoded qubits are obtained. This and the memory’s ability to operate in the quantum regime at room temperature with a low unconditional noise floor illustrate its potential usefulness for real world applications.

•Jan 1, 2011•0 citations

High performance solid state quantum memory

Morgan P. Hedges

This thesis demonstrates an efficient quantum memory that for the first time preserves more quantum information than it loses. Beyond this, it describes how even higher efficiency may be realised without sacrificing the other performance characteristics that are required for a practical device. A quantum memory is a device to store and recall the quantum state of light. Such a memory will be required for most applications of the emerging field of quantum information. The closest practical application is quantum repeaters for long distance encryption. A more distant target is quantum computing. Yet demonstrations of quantum memory to date fall far short of the performance required for repeaters, and further short of that for quantum computing. For these applications, high performance will be required in terms of 3 parameters: long storage time, high efficiency, and a large mode-capacity. Prior to this work, the storage time was the only paramter to have been demonstrated near the required level[1], and that only in a classical regime. The primary result of this thesis is to demonst rate a memory with an efficiency close the required level (70% is measured), and confirm its quantum nature with noise measurements. This represents the first quantum memory with efficiency greater than 50% and the first to operate unconditionally above the "no-cloning limit". The demonstration used the same storage medium as for the previous long-term storage experiment (Pr{u00B3}{u207A}:Y{u2082}Si0{u2085} (PrYSO)), and could in principle reach the same long storage times. The technique used is an optical "gradient echo", an optical equivalent to the long studied gradient echo technique used in Nuclear Magnetic Resonance (NMR). Aside from it's practicality for demonstrations, a gradient-echo also offers a powerful handle for manipulating stored light. However it is more complex than related memory techniques because it employs a spatially-varying medium. This becomes crucial when the optical depth (and memory efficiency) is increased; propagation effects mean the light is stored very differently than in other techniques. A simple linear-response model is used to gain insight into this high optical depth regime. As a result, some new properties are identified which may increase the efficiency in practical circumstances and improve flexibility. Of particular note, it's found that the space-dependence can be used to hide one narrow transition with another. This allows the somewhat unintuitive notion that a light pulse can fully traverse a medium without exciting a transition that it is resonant with. The spectral-hiding property has promise to overcome the problem with simultaneously acheiving all three parameters required for quantum memories. The problem is related to the preparation of available rare-earth ion doped materials. To acheive high efficiency and storage times, these require spectral holeburning whose bandwidth is limited by the splittings of spin levels. Methods exist to create high bandwidth delays lines with holeburning[2], but they cannot be efficient or long-lived. By utilising the spectral-hiding property of the gradient echo, methods to overcome this limitation are described for the first time.

•Jan 1, 2011•3 citations

Full-bandwidth quantum memory of squeezed light

Jinxian Guo, Meihong Wang, Zeliang Wu +6 more

Achieving high end-to-end efficiency and broadband quantum memory of squeezed light is crucial for continuous-variable quantum information processing. Existing demonstrations fail to store squeezed states across their full squeezing bandwidth. Here, we present a full-bandwidth quantum memory of squeezed light with up to 24 MHz bandwidth, which is at least 12 times that of previous narrowband resonant memory systems, via a far-off resonant Raman process. We achieve output squeezing as high as 1.0±0.29dB, with fidelity above 92±0.5% and a memory efficiency of 80%, corresponding to an end-to-end efficiency of 64.2±0.7% when input squeezing is 1.6±0.23dB. The lowest excess noise of 0.025 shot-noise unit in the memory system is estimated by the noisy model, which benefits from optimizing quantum memory performance with a backward-retrieval strategy. Our results show high-performance memory for squeezed states within tens of MHz-level bandwidth, which has potential applications in high-speed quantum information processing.

arXiv:2506.15399•Optica•Apr 8, 2026•1 citation

Quantum optical storage and processing using raman gradient echo memory

Mahdi Hosseini

The non-interacting and high-speed nature of light makes it an ideal carrier of information that is essential for transmission of quantum information. Indeed, many proposals and demonstrations of quantum cryptography rely on the use of fibre-optic networks. Construction of a memory that can store light and preserve its quantum properties will be useful in a range of quantum information systems such as secure quantum communication and quantum computation. This is why a quantum memory for light is a remarkable objective. The key to quantum memory is to store the probability amplitude of the possible outcomes of measurement but without measurement. An important criterion for a quantum memory is that the efficiency of the recall must exceed 50%. This is the crucial no-cloning limit for security of information, since it guarantees that nobody can access the information by copying it. This benchmark is important because any kind of deterministic amplification of quantum information is fundamentally impossible. On-demand retrieval of information and ability to controllably manipulate the quantum information are also important for quantum applications. When light is absorbed by atoms, it is actually possible to reverse the absorption process. In our memory system: light is absorbed by an ensemble of atoms and, using careful conditioning and control, we can cause the stored light to be regenerated and released at a later time. This is done by applying a gradient of magnetic field along the atomic ensemble that is the basis for our optical memory. To recall the light we flip the sign of the gradient field. This kind of reversible absorption is called photon echo, hence the name of our scheme: The Gradient Echo Memory (GEM). This simple protocol is used in our experiment and can be applied to a range of different atomic systems. We have extended the GEM protocol and experimentally implemented a memory using three-level atoms. We used an off-the-shelf Rb vapour cell operating above room temperature as the memory medium. In this realisation, we broke the efficiency record with 87% recall of the input light pulse. Moreover, through complete state tomography of coherent states we have demonstrated the ability of our memory to noiselessly store quantum states of light. We have also demonstrated that the memory can store a string of pulses and then recall the pulses ondemand in arbitrary order allowing re-sequencing of the stored information. Furthermore, we have shown that pulses could be time-compressed, time-stretched or split into multiple smaller pulses and selectively recalled in several pieces. This technique enables the construction of an optical random-access memory for quantum information. Moreover, the scheme to manipulate the spectral properties of optical data, stored inside the memory, has been introduced. We have also investigated the possibility of obtaining large nonlinear phase shifts between single photons inside the memory. Such strong interactions can be used for the implementation of universal quantum gates.

•Jan 1, 2012•2 citations

Raman scheme for adjustable-bandwidth quantum memory

J.-L. Le Gouët, P. R. Berman

We propose a scenario of quantum memory for light based on Raman scattering. The storage medium is a vapor and the different spectral components of the input pulse are stored in different atomic velocity classes. One uses appropriate pulses to reverse the resulting Doppler phase shift and to regenerate the input pulse, without distortion, in the backward direction. The different stages of the protocol are detailed and the recovery efficiency is calculated in the semiclassical picture. Since the memory bandwidth is determined by the Raman transition Doppler width, it can be adjusted by changing the angle between the input pulse wave vector and the control beams. The optical depth also depends on the beam angle. As a consequence the available optical depth can be optimized depending on the needed bandwidth. The predicted recovery efficiency is close to 100% for large optical depth.

arXiv:0904.0667•Physical Review A•Jul 17, 2009•28 citations
A number of techniques exist to use an ensemble of atoms as a quantum memory for light. Many of these propose to use backward retrieval as a way to improve the storage and recall efficiency. We report on a demonstration of an off-resonant Raman memory that uses backward retrieval to achieve an efficiency of 65 ± 6% at a storage time of one pulse duration. The memory has a characteristic decay time of 60 μs, corresponding to a delay-bandwidth product of 160.
This thesis is about the experimental implementation of a high-speed and robust quantum memory for light. A novel far off-resonant Raman approach to ensemble-based quantum memories in a room-temperature environment is developed and demonstrated. Storage and retrieval of sub-nanosecond, weak coherent light pulses at the single-photon-level with total efficiencies exceeding 30% and storage times of up to 4 μs are achieved. The coherence of the memory is shown by directly interfering a copy of the incident signal with the retrieved signal from the memory. The unconditional noise floor of the memory is found to be low enough to operate the memory in the quantum regime at room temperature. Multiple readout of a single stored excitation is demonstrated, suggesting that 100% readout is possible in different temporal modes. Furthermore, first results regarding the storage and retrieval of polarisation encoded qubits are obtained. This and the memory’s ability to operate in the quantum regime at room temperature with a low unconditional noise floor illustrate its potential usefulness for real world applications.
This thesis is about the experimental implementation of a high-speed and robust quantum memory for light. A novel far off-resonant Raman approach to ensemble-based quantum memories in a room-temperature environment is developed and demonstrated. Storage and retrieval of sub-nanosecond, weak coherent light pulses at the single-photon-level with total efficiencies exceeding 30% and storage times of up to 4 μs are achieved. The coherence of the memory is shown by directly interfering a copy of the incident signal with the retrieved signal from the memory. The unconditional noise floor of the memory is found to be low enough to operate the memory in the quantum regime at room temperature. Multiple readout of a single stored excitation is demonstrated, suggesting that 100% readout is possible in different temporal modes. Furthermore, first results regarding the storage and retrieval of polarisation encoded qubits are obtained. This and the memory’s ability to operate in the quantum regime at room temperature with a low unconditional noise floor illustrate its potential usefulness for real world applications.
This thesis demonstrates an efficient quantum memory that for the first time preserves more quantum information than it loses. Beyond this, it describes how even higher efficiency may be realised without sacrificing the other performance characteristics that are required for a practical device. A quantum memory is a device to store and recall the quantum state of light. Such a memory will be required for most applications of the emerging field of quantum information. The closest practical application is quantum repeaters for long distance encryption. A more distant target is quantum computing. Yet demonstrations of quantum memory to date fall far short of the performance required for repeaters, and further short of that for quantum computing. For these applications, high performance will be required in terms of 3 parameters: long storage time, high efficiency, and a large mode-capacity. Prior to this work, the storage time was the only paramter to have been demonstrated near the required level[1], and that only in a classical regime. The primary result of this thesis is to demonst rate a memory with an efficiency close the required level (70% is measured), and confirm its quantum nature with noise measurements. This represents the first quantum memory with efficiency greater than 50% and the first to operate unconditionally above the "no-cloning limit". The demonstration used the same storage medium as for the previous long-term storage experiment (Pr{u00B3}{u207A}:Y{u2082}Si0{u2085} (PrYSO)), and could in principle reach the same long storage times. The technique used is an optical "gradient echo", an optical equivalent to the long studied gradient echo technique used in Nuclear Magnetic Resonance (NMR). Aside from it's practicality for demonstrations, a gradient-echo also offers a powerful handle for manipulating stored light. However it is more complex than related memory techniques because it employs a spatially-varying medium. This becomes crucial when the optical depth (and memory efficiency) is increased; propagation effects mean the light is stored very differently than in other techniques. A simple linear-response model is used to gain insight into this high optical depth regime. As a result, some new properties are identified which may increase the efficiency in practical circumstances and improve flexibility. Of particular note, it's found that the space-dependence can be used to hide one narrow transition with another. This allows the somewhat unintuitive notion that a light pulse can fully traverse a medium without exciting a transition that it is resonant with. The spectral-hiding property has promise to overcome the problem with simultaneously acheiving all three parameters required for quantum memories. The problem is related to the preparation of available rare-earth ion doped materials. To acheive high efficiency and storage times, these require spectral holeburning whose bandwidth is limited by the splittings of spin levels. Methods exist to create high bandwidth delays lines with holeburning[2], but they cannot be efficient or long-lived. By utilising the spectral-hiding property of the gradient echo, methods to overcome this limitation are described for the first time.
Achieving high end-to-end efficiency and broadband quantum memory of squeezed light is crucial for continuous-variable quantum information processing. Existing demonstrations fail to store squeezed states across their full squeezing bandwidth. Here, we present a full-bandwidth quantum memory of squeezed light with up to 24 MHz bandwidth, which is at least 12 times that of previous narrowband resonant memory systems, via a far-off resonant Raman process. We achieve output squeezing as high as 1.0±0.29dB, with fidelity above 92±0.5% and a memory efficiency of 80%, corresponding to an end-to-end efficiency of 64.2±0.7% when input squeezing is 1.6±0.23dB. The lowest excess noise of 0.025 shot-noise unit in the memory system is estimated by the noisy model, which benefits from optimizing quantum memory performance with a backward-retrieval strategy. Our results show high-performance memory for squeezed states within tens of MHz-level bandwidth, which has potential applications in high-speed quantum information processing.
The non-interacting and high-speed nature of light makes it an ideal carrier of information that is essential for transmission of quantum information. Indeed, many proposals and demonstrations of quantum cryptography rely on the use of fibre-optic networks. Construction of a memory that can store light and preserve its quantum properties will be useful in a range of quantum information systems such as secure quantum communication and quantum computation. This is why a quantum memory for light is a remarkable objective. The key to quantum memory is to store the probability amplitude of the possible outcomes of measurement but without measurement. An important criterion for a quantum memory is that the efficiency of the recall must exceed 50%. This is the crucial no-cloning limit for security of information, since it guarantees that nobody can access the information by copying it. This benchmark is important because any kind of deterministic amplification of quantum information is fundamentally impossible. On-demand retrieval of information and ability to controllably manipulate the quantum information are also important for quantum applications. When light is absorbed by atoms, it is actually possible to reverse the absorption process. In our memory system: light is absorbed by an ensemble of atoms and, using careful conditioning and control, we can cause the stored light to be regenerated and released at a later time. This is done by applying a gradient of magnetic field along the atomic ensemble that is the basis for our optical memory. To recall the light we flip the sign of the gradient field. This kind of reversible absorption is called photon echo, hence the name of our scheme: The Gradient Echo Memory (GEM). This simple protocol is used in our experiment and can be applied to a range of different atomic systems. We have extended the GEM protocol and experimentally implemented a memory using three-level atoms. We used an off-the-shelf Rb vapour cell operating above room temperature as the memory medium. In this realisation, we broke the efficiency record with 87% recall of the input light pulse. Moreover, through complete state tomography of coherent states we have demonstrated the ability of our memory to noiselessly store quantum states of light. We have also demonstrated that the memory can store a string of pulses and then recall the pulses ondemand in arbitrary order allowing re-sequencing of the stored information. Furthermore, we have shown that pulses could be time-compressed, time-stretched or split into multiple smaller pulses and selectively recalled in several pieces. This technique enables the construction of an optical random-access memory for quantum information. Moreover, the scheme to manipulate the spectral properties of optical data, stored inside the memory, has been introduced. We have also investigated the possibility of obtaining large nonlinear phase shifts between single photons inside the memory. Such strong interactions can be used for the implementation of universal quantum gates.
We propose a scenario of quantum memory for light based on Raman scattering. The storage medium is a vapor and the different spectral components of the input pulse are stored in different atomic velocity classes. One uses appropriate pulses to reverse the resulting Doppler phase shift and to regenerate the input pulse, without distortion, in the backward direction. The different stages of the protocol are detailed and the recovery efficiency is calculated in the semiclassical picture. Since the memory bandwidth is determined by the Raman transition Doppler width, it can be adjusted by changing the angle between the input pulse wave vector and the control beams. The optical depth also depends on the beam angle. As a consequence the available optical depth can be optimized depending on the needed bandwidth. The predicted recovery efficiency is close to 100% for large optical depth.