Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1805.00130 · Physical Review Applied

Intrinsic Timing Jitter and Latency in Superconducting Nanowire Single-photon Detectors

J.P. Allmaras, A.G. Kozorezov, B.A. Korzh, Karl K. Berggren, Matthew D. Shaw

Published Mar 26, 2019• 70 citations
arXivHTMLPDF

Abstract

The topic of latency in superconducting nanowire single-photon detectors (SNSPDs, the fastest type of such sensors) is of interest for understanding the absolute limits of timing performance in these devices, but so far no model of the detection mechanism could quantitatively explain recent measurements of intrinsic jitter and latency. This analysis of the connection between detector latency and timing jitter in the presence of Fano fluctuations and spatial nonuniformity provides a framework for studying the intrinsic jitter in SNSPDs, and suggests that intrinsic jitter could be reduced by enhancing scattering to suppress superconductivity as quickly as possible.

DOI
10.1103/physrevapplied.11.034062

Related papers

Intrinsically-limited timing jitter in molybdenum silicide superconducting nanowire single-photon detectors

Misael Caloz, Boris A. Korzh, Edward Ramirez +5 more

Recent progress in the development of superconducting nanowire single-photon detectors (SNSPDs) has delivered excellent performance and has had a great impact on a range of research fields. The timing jitter, which denotes the temporal resolution of the detection, is a crucial parameter for many applications. Despite extensive work since their apparition, the lowest jitter achievable with SNSPDs is still not clear, and the origin of the intrinsic limits is not fully understood. Understanding its intrinsic behavior and limits is a mandatory step toward improvements. Here, we report our experimental study on the intrinsically-limited timing jitter in molybdenum silicide SNSPDs. We show that to reach intrinsic jitter, crucial properties such as the latching current and the kinetic inductance of the devices have to be understood. The dependence on the nanowire thickness and the energy dependence of the intrinsic jitter are quantified, and the origin of the limits is exhibited. System timing jitter of 6.0 ps at 532 nm and 10.6 ps at 1550 nm photon wavelength has been obtained.

arXiv:1906.02073•Journal of Applied Physics•Oct 22, 2019•30 citations

Improving the timing jitter of a superconducting nanowire single-photon detection system

Junjie Wu, Lixing You, Sijing Chen +5 more

Low timing jitter is a unique merit of superconducting nanowire single-photon detectors (SNSPDs) for time-correlated applications. Quantitative analysis was performed for the SNSPD system. Aided by an oscilloscope with an optimal signal amplitude, we were able to measure a full width at half-maximum system timing jitter as low as 14.2 ps for a high-switching-current SNSPD using a room-temperature low-noise amplifier. When using a time-correlated single-photon counting module, the system timing jitter was 17.3 ps. The detector's intrinsic timing jitter was estimated at ∼12.0 ps.

Applied Optics•Mar 6, 2017•92 citations

Superconducting nanowire single-photon detectors at the infrared spectrum range: detection efficiency and timing jitter

Xiaolong Hu, Nan Hu, Yun Meng +9 more

This paper reviews some recent research progress in superconducting nanowire single-photon detectors (SNSPDs) at the infrared spectrum range, with particular emphasis on detection efficiency and timing jitter. For detection efficiency, we present fractal SNSPDs with reduced polarization sensitivity; for timing jitter, we present two mechanisms of device timing jitter – vortex-crossing-induced timing jitter and spatial-inhomogeneity-induced timing jitter.

Terahertz, RF, Millimeter, and Submillimeter-Wave Technology and Applications•Mar 1, 2019•1 citation

Minimal Timing Jitter in Superconducting Nanowire Single-Photon Detectors

Denis Yu. Vodolazov

The results of this theoretical study are important for applications dealing with superconducting nanowire single-photon detectors (SNSPDs), which include quantum information processing. The author shows that the variation in delay time ${\ensuremath{\tau}}_{d}$ (timing jitter) of the voltage response after absorption of a single photon, connected to either position-dependent response or variation in the energy deposited to electrons, could be as small as 1 ps when the current in the superconducting strip approaches the depairing current. Reducing this jitter is a main topic of SNSPD research, and understanding the origins of these variations is necessary to that end.

arXiv:1807.07709•Physical Review Applied•Jan 9, 2019•32 citations

Superconducting nanowire detector jitter limited by detector geometry

Niccolò Calandri, Qingyuan Zhao, Di Zhu +2 more

Detection jitter quantifies variance introduced by the detector in the determination of photon arrival time. It is a crucial performance parameter for systems using superconducting nanowire single photon detectors (SNSPDs). In this work, we have demonstrated that the detection timing jitter is limited in part by the spatial variation of the photon detection events along the length of the wire. We define this jitter source as a geometric jitter since it is related to the length and area of the SNSPD. To characterize the geometric jitter, we have constructed a differential cryogenic readout with less than 7 ps of an electronic jitter that can amplify the pulses generated from the two ends of an SNSPD. By differencing the measured arrival times of the two electrical pulses, we were able to partially cancel out the difference of the propagation times and thus reduce the uncertainty of the photon arrival time. We proved that the variation of the differential propagation time was a few ps for a 3 μm × 3 μm device, while it increased up to 50 ps for a 20 μm × 20 μm device. In a 20 μm × 20 μm large SNSPD, we achieved a 20% reduction in the overall detection timing jitter for detecting the telecom-wavelength photons by using the differential cryogenic readout.

arXiv:1607.06713•Applied Physics Letters•Oct 10, 2016•114 citations

High-detection efficiency and low-timing jitter with amorphous superconducting nanowire single-photon detectors

Misael Caloz, Matthieu Perrenoud, Claire Autebert +6 more

Recent progress in the development of superconducting nanowire single-photon detectors (SNSPDs) made of amorphous materials has delivered excellent performances and has had a great impact on a range of research fields. Despite showing the highest system detection efficiency (SDE) ever reported with SNSPDs, amorphous materials typically lead to lower critical currents, which have impacts on their jitter performance. Combining a very low jitter and a high SDE remains a challenge. Here, we report on highly efficient superconducting nanowire single-photon detectors based on amorphous MoSi, combining system jitters as low as 26 ps and a SDE of 80% at 1550 nm. We also report detailed observations on the jitter behaviour, which hints at intrinsic limitations and leads to practical implications for SNSPD performance.

arXiv:1710.06740•Applied Physics Letters•Feb 5, 2018•110 citations
The topic of latency in superconducting nanowire single-photon detectors (SNSPDs, the fastest type of such sensors) is of interest for understanding the absolute limits of timing performance in these devices, but so far no model of the detection mechanism could quantitatively explain recent measurements of intrinsic jitter and latency. This analysis of the connection between detector latency and timing jitter in the presence of Fano fluctuations and spatial nonuniformity provides a framework for studying the intrinsic jitter in SNSPDs, and suggests that intrinsic jitter could be reduced by enhancing scattering to suppress superconductivity as quickly as possible.
Recent progress in the development of superconducting nanowire single-photon detectors (SNSPDs) has delivered excellent performance and has had a great impact on a range of research fields. The timing jitter, which denotes the temporal resolution of the detection, is a crucial parameter for many applications. Despite extensive work since their apparition, the lowest jitter achievable with SNSPDs is still not clear, and the origin of the intrinsic limits is not fully understood. Understanding its intrinsic behavior and limits is a mandatory step toward improvements. Here, we report our experimental study on the intrinsically-limited timing jitter in molybdenum silicide SNSPDs. We show that to reach intrinsic jitter, crucial properties such as the latching current and the kinetic inductance of the devices have to be understood. The dependence on the nanowire thickness and the energy dependence of the intrinsic jitter are quantified, and the origin of the limits is exhibited. System timing jitter of 6.0 ps at 532 nm and 10.6 ps at 1550 nm photon wavelength has been obtained.
Low timing jitter is a unique merit of superconducting nanowire single-photon detectors (SNSPDs) for time-correlated applications. Quantitative analysis was performed for the SNSPD system. Aided by an oscilloscope with an optimal signal amplitude, we were able to measure a full width at half-maximum system timing jitter as low as 14.2 ps for a high-switching-current SNSPD using a room-temperature low-noise amplifier. When using a time-correlated single-photon counting module, the system timing jitter was 17.3 ps. The detector's intrinsic timing jitter was estimated at ∼12.0 ps.
The results of this theoretical study are important for applications dealing with superconducting nanowire single-photon detectors (SNSPDs), which include quantum information processing. The author shows that the variation in delay time ${\ensuremath{\tau}}_{d}$ (timing jitter) of the voltage response after absorption of a single photon, connected to either position-dependent response or variation in the energy deposited to electrons, could be as small as 1 ps when the current in the superconducting strip approaches the depairing current. Reducing this jitter is a main topic of SNSPD research, and understanding the origins of these variations is necessary to that end.
Detection jitter quantifies variance introduced by the detector in the determination of photon arrival time. It is a crucial performance parameter for systems using superconducting nanowire single photon detectors (SNSPDs). In this work, we have demonstrated that the detection timing jitter is limited in part by the spatial variation of the photon detection events along the length of the wire. We define this jitter source as a geometric jitter since it is related to the length and area of the SNSPD. To characterize the geometric jitter, we have constructed a differential cryogenic readout with less than 7 ps of an electronic jitter that can amplify the pulses generated from the two ends of an SNSPD. By differencing the measured arrival times of the two electrical pulses, we were able to partially cancel out the difference of the propagation times and thus reduce the uncertainty of the photon arrival time. We proved that the variation of the differential propagation time was a few ps for a 3 μm × 3 μm device, while it increased up to 50 ps for a 20 μm × 20 μm device. In a 20 μm × 20 μm large SNSPD, we achieved a 20% reduction in the overall detection timing jitter for detecting the telecom-wavelength photons by using the differential cryogenic readout.
Recent progress in the development of superconducting nanowire single-photon detectors (SNSPDs) made of amorphous materials has delivered excellent performances and has had a great impact on a range of research fields. Despite showing the highest system detection efficiency (SDE) ever reported with SNSPDs, amorphous materials typically lead to lower critical currents, which have impacts on their jitter performance. Combining a very low jitter and a high SDE remains a challenge. Here, we report on highly efficient superconducting nanowire single-photon detectors based on amorphous MoSi, combining system jitters as low as 26 ps and a SDE of 80% at 1550 nm. We also report detailed observations on the jitter behaviour, which hints at intrinsic limitations and leads to practical implications for SNSPD performance.