A quantum measuring instrument is constructed that utilises symmetry breaking to enhance a microscopic signal. The entire quantum system consists of a system–apparatus–environment triad that is composed of a small set of spin-1/2 particles. The apparatus is a ferromagnet that measures the z-component of a single spin. A full quantum many-body calculation allows for a careful examination of the loss of phase coherence, the formation and amplification of system–apparatus correlations, the irreversibility of registration, the fault tolerance, and the bias of the device.
A quantum measuring instrument is constructed that utilises symmetry breaking to enhance a microscopic signal. The entire quantum system consists of a system–apparatus–environment triad that is composed of a small set of spin-1/2 particles. The apparatus is a ferromagnet that measures the z-component of a single spin. A full quantum many-body calculation allows for a careful examination of the loss of phase coherence, the formation and amplification of system–apparatus correlations, the irreversibility of registration, the fault tolerance, and the bias of the device.
In a quantum measurement, a coupling g between the system S and the apparatus A triggers the establishment of correlations, which provide statistical information about S. Robust registration requires A to be macroscopic, and a dynamical symmetry breaking of A governed by S allows the absence of any bias. Phase transitions are thus a paradigm for quantum measurement apparatuses, with the order parameter as pointer variable. The coupling g behaves as the source of symmetry breaking. The exact solution of a model where S is a single spin and A a magnetic dot (consisting of N interacting spins and a phonon thermal bath) exhibits the reduction of the state as a relaxation process of the off‐diagonal elements of S + A, rapid due to the large size of N. The registration of the diagonal elements involves a slower relaxation from the initial paramagnetic state of A to either one of its ferromagnetic states. If g is too weak, the measurement fails due to a “Buridan’s ass” effect. The probability distribution for the magnetization then develops not one but two narrow peaks at the ferromagnetic values. During its evolution it goes through wide shapes extending between these values.
The measurement of a spin-$\half$ is modeled by coupling it to an apparatus, that consists of an Ising magnetic dot coupled to a phonon bath. Features of quantum measurements are derived from the dynamical solution of the measurement, regarded as a process of quantum statistical mechanics. Schrödinger cat terms involving both the system and the apparatus, die out very quickly, while the registration is a process taking the apparatus from its initially metastable state to one of its stable final states. The occurrence of Born probabilities can be inferred at the macroscopic level, by looking at the pointer alone. Apparent non-unitary behavior of the measurement process is explained by the arisal of small many particle correlations, that characterize relaxation.
A Hamiltonian model is solved, which satisfies all requirements for a realistic ideal quantum measurement. The system S is a spin-½, whose z -component is measured through coupling with an apparatus A = M + B, consisting of a magnet M formed by a set of N >> 1 spins with quartic infinite-range Ising interactions, and a phonon bath B at temperature T . Initially A is in a metastable paramagnetic phase. The process involves several time-scales. Without being much affected, A first acts on S, whose state collapses in a very brief time. The mechanism differs from the usual decoherence. Soon after its irreversibility is achieved. Finally, the field induced by S on M, which may take two opposite values with probabilities given by Born's rule, drives A into its up or down ferromagnetic phase. The overall final state involves the expected correlations between the result registered in M and the state of S. The measurement is thus accounted for by standard quantum-statistical mechanics and its specific features arise from the macroscopic size of the apparatus.
An exactly solvable model for a quantum measurement is discussed, that integrates quantum measurements with classical measurements. The z-component of a spin-1/2 test spin is measured with an apparatus, that itself consists of magnet of N spin-1/2 particles, coupled to a bath. The initial state of the magnet is a metastable paramagnet, while the bath starts in a thermal, gibbsian state. Conditions are such that the act of measurement drives the magnet in the up or down ferromagnetic state, according to the sign of s_z of the test spin. The quantum measurement goes in two steps. On a timescale 1/\sqrt{N} the collapse takes place due to a unitary evolution of test spin and apparatus spins; on a larger but still short timescale this collapse is made definite by the bath. Then the system is in a `classical' state, having a diagonal density matrix. The registration of that state is basically a classical process, that can already be understood from classical statistical mechanics.
This thesis presents a theoretical and experimental analysis of the quantum measurement problem, based on the Curie-Weiss model of Allahverdyan, Balian, and Nieuwenhuizen [1]. This model describes the measurement process as the result of the interaction between a quantum system of interest and a macroscopic apparatus (a Curie-Weiss magnet), exhibiting spontaneous symmetry breaking. The magnet is immersed in a thermal environment and acts as a permanent memory. The main strength of this model lies in its ability to yield rigorous analytical results that elucidate all stages of the measurement dynamics. In the first part of the thesis, these theoretical results are rederived through an alternative formalism. Specifically, starting from the dynamics of the total system-apparatus density matrix, the reduced evolution equation is systematically derived by tracing out the environmental degrees of freedom within the Born-Markov approximation framework, whereas the authors of [1] derived the reduced dynamics by applying a perturbative expansion to the total system evolution operator. In the second part, a physical variant of the original model, in which the Curie-Weiss magnet is replaced by a two-dimensional Ising ferromagnet, is implemented on a D-Wave quantum annealer [2]. The experiments demonstrate that, by fine-tuning the operational parameters of the annealer, it is possible to realize a dynamic regime wherein the state of the target spin triggers the symmetry breaking of the spin network, driving its collapse into the corresponding macroscopic magnetization state. This constitutes an experimental validation of the model, which so far had only been studied theoretically in the literature. Finally, the thermodynamic cost associated with this measurement process implemented on the annealer was experimentally characterized and evaluated against the Landauer bound [3]. The results show that the thermodynamic work required to perform the measurement scales with the number of qubits N constituting the apparatus, in strong agreement with previous findings in the literature [4]. References: [1] A. E. Allahverdyan, R. Balian, and T. M. Nieuwenhuizen, Understanding quantum measurement from the solution of dynamical models, Physics Reports 525, 1–166 (2013). [2] D-Wave Quantum Inc., D-Wave System Documentation, https://docs.dwavequantum.com/, Accessed: 2026. [3] R. Landauer, Irreversibility and heat generation in the computing process, IBM Journal of Research and Development 5(3), 183–191 (1961). [4] L. Buffoni and M. Campisi, Cooperative quantum information erasure, Quantum 7, 961 (2023).
An exactly solvable model for a quantum measurement is discussed which is governed by hamiltonian quantum dynamics. The z‐component ŝz of a spin −12 is measured with an apparatus, which itself consists of magnet coupled to a bath. The initial state of the magnet is a metastable paramagnet, while the bath starts in a thermal, gibbsian state. Conditions are such that the act of measurement drives the magnet in the up or down ferromagnetic state according to the sign of sz of the tested spin. The quantum measurement goes in two steps. On a timescale 1/N the off‐diagonal elements of the spin’s density matrix vanish due to a unitary evolution of the tested spin and the N apparatus spins; on a larger but still short timescale this is made definite by the bath. Then the system is in a ‘classical’ state, having a diagonal density matrix. The registration of that state is a quantum process which can already be understood from classical statistical mechanics. The von Neumann collapse and the Born rule are derived rather than postulated.