Abstract We propose and experimentally demonstrate an efficient scheme for bidirectional and deterministic photonic communication between two remote superconducting modules. The two chips, each consists of a transmon, are connected through a one-meter long coaxial cable that is coupled to a dedicated “communication” resonator on each chip. The two communication resonators hybridize with a mode of the cable to form a dark “communication mode” that is highly immune to decay in the coaxial cable. We overcome the various restrictions of quantum communication channels established by other recent approaches in deterministic communication for superconducting qubits. Our approach enables bidirectional communication, and eliminates the high insertion loss and large volume footprint of circulators. We modulate the transmon frequency via a parametric drive to generate sideband interactions between the transmon and the communication mode. We demonstrate bidirectional single-photon transfer with a success probability exceeding 60%, and generate an entangled Bell pair with a fidelity of 79.3 ± 0.3%.
Abstract We propose and experimentally demonstrate an efficient scheme for bidirectional and deterministic photonic communication between two remote superconducting modules. The two chips, each consists of a transmon, are connected through a one-meter long coaxial cable that is coupled to a dedicated “communication” resonator on each chip. The two communication resonators hybridize with a mode of the cable to form a dark “communication mode” that is highly immune to decay in the coaxial cable. We overcome the various restrictions of quantum communication channels established by other recent approaches in deterministic communication for superconducting qubits. Our approach enables bidirectional communication, and eliminates the high insertion loss and large volume footprint of circulators. We modulate the transmon frequency via a parametric drive to generate sideband interactions between the transmon and the communication mode. We demonstrate bidirectional single-photon transfer with a success probability exceeding 60%, and generate an entangled Bell pair with a fidelity of 79.3 ± 0.3%.
Quantum communication between remote chips is essential for realizing large-scale superconducting quantum computers. For such communication, itinerant microwave photons propagating through transmission lines offer a promising approach. However, demonstrations to date have relied on frequency-tunable circuit elements to compensate for fabrication-related parameter variations between sender and receiver devices, introducing control complexity and limiting scalability. In this work, we demonstrate deterministic quantum state transfer and remote entanglement generation between fixed-frequency superconducting qubits on separate chips. To compensate for the sender-receiver mismatch, we employ a frequency-tunable photon-generation technique which enables us to adjust the photon frequency without modifying circuit parameters. To enhance the frequency tunability, we implement broadband transfer resonators composed of two coupled coplanar-waveguide resonators, achieving a bandwidth of more than 100 MHz. This broadband design enables successful quantum communication across a 30-MHz range of photon frequencies between the remote qubits. Quantum process tomography reveals state transfer fidelities of around 79% and Bell-state fidelities of around 73% across the full frequency range. Our approach avoids the complexity of the control lines and noise channels, providing a flexible pathway toward scalable quantum networks.
Abstract We propose an experimentally feasible scheme for the dissipative generation of stable entanglement of superconducting qubits via coupling modulation without applying any drives on qubits and resonator. Firstly, we study the circuit of one superconducting transmission line resonator coupled to two separated qubits via two superconducting quantum interference devices (SUQIDs). By modulating the inductance of the SQUIDs via external fluxes, we can tailor an appropriate qubit-resonator coupling with both red- and blue-sideband interactions. Combined with the photon loss of the resonator, the two qubits can be autonomously steered into a long-lived entangled state with high fidelity. Moreover, we extend the model to one resonator coupled to two separated qubit chains, each of which contains N linearly coupled superconducting qubits. We show that the lossy resonator can drive the whole system into a unique dark state, i.e. , a series of N entangled pairs of qubits across the chains can be stabilized at the stationary state. So, the present work enables the preparation of a stable long-range entangled state between the two qubits in the end sites of the chains, which plays an important role for implementing scalable quantum computation and quantum communication.
We present two one-step schemes to generate the Bell state and construct the controlled-phase gate deterministically on remote transmon qutrits trapped in different resonators connected by a superconducting transmission line for a quantum network. They are implemented with coherent evolutions of the entire system in the all-resonance regime assisted by the dark microwave photons which are robust against the transmission line loss. Different from previous works in other quantum systems for a quantum network, the present proposals do not require classical pulses and ancillary qubits. Our simulations with feasible parameters show that the fidelities of both these schemes exceed 99% which is beyond the fault-tolerant threshold for quantum communication.
Quantum communication test beds provide a useful resource for experimentally investigating a variety of communication protocols. Here we demonstrate a superconducting circuit test bed with bidirectional multiphoton state transfer capability using time-domain shaped wave packets. The system we use to achieve this comprises two remote nodes, each including a tunable superconducting transmon qubit and a tunable microwave-frequency resonator, linked by a 2 m-long superconducting coplanar waveguide, which serves as a transmission line. We transfer both individual and superposition Fock states between the two remote nodes, and additionally show that this bidirectional state transfer can be done simultaneously, as well as being used to entangle elements in the two nodes.
Effective quantum communication between remote quantum nodes requires high fidelity quantum state transfer and remote entanglement generation. Recent experiments have demonstrated that microwave photons, as well as phonons, can be used to couple superconducting qubits, with a fidelity limited primarily by loss in the communication channel [P. Kurpiers et al., Nature (London) 558, 264 (2018)NATUAS0028-083610.1038/s41586-018-0195-y; C. J. Axline et al., Nat. Phys. 14, 705 (2018)NPAHAX1745-247310.1038/s41567-018-0115-y; P. Campagne-Ibarcq et al., Phys. Rev. Lett. 120, 200501 (2018)PRLTAO0031-900710.1103/PhysRevLett.120.200501; N. Leung et al., npj Quantum Inf. 5, 18 (2019)2056-638710.1038/s41534-019-0128-0; Y. P. Zhong et al., Nat. Phys. 15, 741 (2019)NPAHAX1745-247310.1038/s41567-019-0507-7; A. Bienfait et al., Science 364, 368 (2019)SCIEAS0036-807510.1126/science.aaw8415]. Adiabatic protocols can overcome channel loss by transferring quantum states without populating the lossy communication channel. Here, we present a unique superconducting quantum communication system, comprising two superconducting qubits connected by a 0.73 m-long communication channel. Significantly, we can introduce large tunable loss to the channel, allowing exploration of different entanglement protocols in the presence of dissipation. When set for minimum loss in the channel, we demonstrate an adiabatic quantum state transfer protocol that achieves 99% transfer efficiency as well as the deterministic generation of entangled Bell states with a fidelity of 96%, all without populating the intervening communication channel, and competitive with a qubit-resonant mode-qubit relay method. We also explore the performance of the adiabatic protocol in the presence of significant channel loss, and show that the adiabatic protocol protects against loss in the channel, achieving higher state transfer and entanglement fidelities than the relay method.
A distributed quantum computing system requires a quantum communication channel between spatially separated processing units. In superconducting circuits, such a channel can be realized by using propagating microwave photons to encode and transfer quantum information between an emitter and a receiver node. Here we experimentally demonstrate a superconducting circuit that deterministically transfers the state of a data qubit into a propagating microwave mode, with a process fidelity of 94.5%. We use a time-varying parametric drive to shape the temporal profile of the propagating mode to be time symmetric and with constant phase, so that reabsorption by the receiving processor can be implemented as a time-reversed version of the emission. We demonstrate a self-calibrating routine to correct for time-dependent shifts of the emitted frequencies due to the modulation of the parametric drive. Our work provides a reliable method to implement high-fidelity quantum state transfer and remote entanglement operations in a distributed quantum computing network.