Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1804.00952 · Lecture notes in computer science

From Symmetric Pattern-Matching to Quantum Control

Amr Sabry, Benoît Valiron, Juliana Kaizer Vizzotto

Published Jan 1, 2018• 61 citations
arXivHTMLPDF

Abstract

One perspective on quantum algorithms is that they are classical algorithms having access to a special kind of memory with exotic properties. This perspective suggests that, even in the case of quantum algorithms, the control flow notions of sequencing, conditionals, loops, and recursion are entirely classical. There is however, another notion of control flow, that is itself quantum. The notion of quantum conditional expression is reasonably well-understood: the execution of the two expressions becomes itself a superposition of executions. The quantum counterpart of loops and recursion is however not believed to be meaningful in its most general form. In this paper, we argue that, under the right circumstances, a reasonable notion of quantum loops and recursion is possible. To this aim, we first propose a classical, typed, reversible language with lists and fixpoints. We then extend this language to the closed quantum domain (without measurements) by allowing linear combinations of terms and restricting fixpoints to structurally recursive fixpoints whose termination proofs match the proofs of convergence of sequences in infinite-dimensional Hilbert spaces. We additionally give an operational semantics for the quantum language in the spirit of algebraic lambda-calculi and illustrate its expressiveness by modeling several common unitary operations.

DOI
10.1007/978-3-319-89366-2_19

Related papers

Combining quantum and classical control: syntax, semantics and adequacy

Kinnari Dave, Louis Lemonnier, Romain Péchoux +1 more

Abstract The two main notions of control in quantum programming languages are often referred to as “quantum” control and “classical” control. With the latter, the control flow is based on classical information, potentially resulting from a quantum measurement, and this paradigm is well-suited to mixed state quantum computation. Whereas with quantum control, we are primarily focused on pure quantum computation and there the “control” is based on superposition. The two paradigms have not mixed well traditionally and they are almost always treated separately. In this work, we show that the paradigms may be combined within the same system. The key ingredients for achieving this are: (1) syntactically: a modality for incorporating pure quantum types into a mixed state quantum type system; (2) operationally: an adaptation of the notion of “quantum configuration” from quantum lambda-calculi, where the quantum data is replaced with pure quantum primitives; (3) denotationally: suitable (sub)categories of Hilbert spaces, for pure computation and von Neumann algebras, for mixed state computation in the Heisenberg picture of quantum mechanics.

Lecture notes in computer science•Jan 1, 2025•8 citations

A programming language combining quantum and classical control

Kinnari Dave, Louis Lemonnier, Romain Péchoux +1 more

The two main notions of control in quantum programming languages are often referred to as "quantum control" and "classical control". With the latter, the control flow is based on classical information, potentially resulting from a quantum measurement, and this paradigm is well-suited to mixed state quantum computation. Whereas with quantum control, we are primarily focused on pure quantum computation and there the "control" is based on superposition. The two paradigms have not mixed well traditionally and they are almost always treated separately. In this work, we show that the paradigms may be combined within the same system. The key ingredients for achieving this are: (1) syntactically: a modality for incorporating pure quantum types into a mixed state quantum type system; (2) operationally: an adaptation of the notion of "quantum configuration" from quantum lambda-calculi, where the quantum data is replaced with pure quantum primitives; (3) denotationally: suitable (sub)categories of Hilbert spaces, for pure computation and von Neumann algebras, for mixed state computation in the Heisenberg picture of quantum mechanics.

cs.LOCross-listedarXiv:2511.22537•Nov 28, 2025•0 citations

Quantum Alternation: Prospects and Problems

Costin Bădescu, Prakash Panangaden

We propose a notion of quantum control in a quantum programming language which permits the superposition of finitely many quantum operations without performing a measurement. This notion takes the form of a conditional construct similar to the IF statement in classical programming languages. We show that adding such a quantum IF statement to the QPL programming language simplifies the presentation of several quantum algorithms. This motivates the possibility of extending the denotational semantics of QPL to include this form of quantum alternation. We give a denotational semantics for this extension of QPL based on Kraus decompositions rather than on superoperators. Finally, we clarify the relation between quantum alternation and recursion, and discuss the possibility of lifting the semantics defined by Kraus operators to the superoperator semantics defined by Selinger.

arXiv:1511.01567•Electronic Proceedings in Theoretical Computer Science•Nov 3, 2015•32 citations

Quantum Control Machine: The Limits of Control Flow in Quantum Programming

Charles Yuan, Agnes Villanyi, Michael Carbin

Quantum algorithms for tasks such as factorization, search, and simulation rely on control flow such as branching and iteration that depends on the value of data in superposition. High-level programming abstractions for control flow, such as switches, loops, higher-order functions, and continuations, are ubiquitous in classical languages. By contrast, many quantum languages do not provide high-level abstractions for control flow in superposition, and instead require the use of hardware-level logic gates to implement such control flow. The reason for this gap is that whereas a classical computer supports control flow abstractions using a program counter that can depend on data, the typical architecture of a quantum computer does not analogously provide a program counter that can depend on data in superposition. As a result, the complete set of control flow abstractions that can be correctly realized on a quantum computer has not yet been established. In this work, we provide a complete characterization of the properties of control flow abstractions that are correctly realizable on a quantum computer. First, we prove that even on a quantum computer whose program counter exists in superposition, one cannot correctly realize control flow in quantum algorithms by lifting the classical conditional jump instruction to work in superposition. This theorem denies the ability to directly lift general abstractions for control flow such as the λ-calculus from classical to quantum programming. In response, we present the necessary and sufficient conditions for control flow to be correctly realizable on a quantum computer. We introduce the quantum control machine, an instruction set architecture featuring a conditional jump that is restricted to satisfy these conditions. We show how this design enables a developer to correctly express control flow in quantum algorithms using a program counter in place of logic gates.

arXiv:2304.15000•Proceedings of the ACM on Programming Languages•Apr 29, 2024•25 citations

A Lambda Calculus for Quantum Computation

André van Tonder

The classical lambda calculus may be regarded both as a programming language and as a formal algebraic system for reasoning about computation. It provides a computational model equivalent to the Turing machine and continues to be of enormous benefit in the classical theory of computation. We propose that quantum computation, like its classical counterpart, may benefit from a version of the lambda calculus suitable for expressing and reasoning about quantum algorithms. In this paper we develop a quantum lambda calculus as an alternative model of quantum computation, which combines some of the benefits of both the quantum Turing machine and the quantum circuit models. The calculus turns out to be closely related to the linear lambda calculi used in the study of linear logic. We set up a computational model and an equational proof system for this calculus, and we argue that it is equivalent to the quantum Turing machine.

arXiv:quant-ph/0307150•SIAM Journal on Computing•Jan 1, 2004•206 citations

Programming with Quantum-Controlled Quantum Channels

Kengo Hirata, Takeshi Tsukada

In contrast to a classical bit, which can only take the value $0$ or $1$, its quantum counterpart -- a qubit -- can exist in a superposition of $0$ and $1$. This is a superposition of data values, naturally raising the question of whether one can superpose not only data but also programs. For example, a particular superposition of programs, known as the quantum SWITCH, has attracted much attention, and its implementations and computational advantages have been studied extensively within the physics community. A naive way to control a program by a qubit is by means of a controlled operation. Given an operation $F$, this amounts to considering an operation that behaves as $F$ when the control qubit is $|1\rangle$, and as the identity operation when the control qubit is $|0\rangle$. This idea works well when $F$ is a unitary operation, but it is not well-defined for a general quantum channel. By contrast, the quantum SWITCH is free from the well-definedness issue. This contrast leads to the key insight of this paper: controlled operations and the quantum SWITCH should be regarded as different kinds of quantum control mechanisms. Building on this insight, we develop a novel quantum programming language with quantum control and measurement that can express the quantum SWITCH over quantum channels. Using a semantic analysis based on program transformations, we identify the source of the ill-behavedness of controlled operations as the \emph{correspondence problem}: a lack of coordination between the measurements performed in the then- and else-branches of quantum conditional branching. We address this problem with a linear type system that enforces alignment of the quantum operations used in the two branches, yielding a well-behaved language capable of expressing the quantum SWITCH.

cs.PLCross-listedarXiv:2607.15873•Jul 20, 2026•0 citations
One perspective on quantum algorithms is that they are classical algorithms having access to a special kind of memory with exotic properties. This perspective suggests that, even in the case of quantum algorithms, the control flow notions of sequencing, conditionals, loops, and recursion are entirely classical. There is however, another notion of control flow, that is itself quantum. The notion of quantum conditional expression is reasonably well-understood: the execution of the two expressions becomes itself a superposition of executions. The quantum counterpart of loops and recursion is however not believed to be meaningful in its most general form. In this paper, we argue that, under the right circumstances, a reasonable notion of quantum loops and recursion is possible. To this aim, we first propose a classical, typed, reversible language with lists and fixpoints. We then extend this language to the closed quantum domain (without measurements) by allowing linear combinations of terms and restricting fixpoints to structurally recursive fixpoints whose termination proofs match the proofs of convergence of sequences in infinite-dimensional Hilbert spaces. We additionally give an operational semantics for the quantum language in the spirit of algebraic lambda-calculi and illustrate its expressiveness by modeling several common unitary operations.
Abstract The two main notions of control in quantum programming languages are often referred to as “quantum” control and “classical” control. With the latter, the control flow is based on classical information, potentially resulting from a quantum measurement, and this paradigm is well-suited to mixed state quantum computation. Whereas with quantum control, we are primarily focused on pure quantum computation and there the “control” is based on superposition. The two paradigms have not mixed well traditionally and they are almost always treated separately. In this work, we show that the paradigms may be combined within the same system. The key ingredients for achieving this are: (1) syntactically: a modality for incorporating pure quantum types into a mixed state quantum type system; (2) operationally: an adaptation of the notion of “quantum configuration” from quantum lambda-calculi, where the quantum data is replaced with pure quantum primitives; (3) denotationally: suitable (sub)categories of Hilbert spaces, for pure computation and von Neumann algebras, for mixed state computation in the Heisenberg picture of quantum mechanics.
The two main notions of control in quantum programming languages are often referred to as "quantum control" and "classical control". With the latter, the control flow is based on classical information, potentially resulting from a quantum measurement, and this paradigm is well-suited to mixed state quantum computation. Whereas with quantum control, we are primarily focused on pure quantum computation and there the "control" is based on superposition. The two paradigms have not mixed well traditionally and they are almost always treated separately. In this work, we show that the paradigms may be combined within the same system. The key ingredients for achieving this are: (1) syntactically: a modality for incorporating pure quantum types into a mixed state quantum type system; (2) operationally: an adaptation of the notion of "quantum configuration" from quantum lambda-calculi, where the quantum data is replaced with pure quantum primitives; (3) denotationally: suitable (sub)categories of Hilbert spaces, for pure computation and von Neumann algebras, for mixed state computation in the Heisenberg picture of quantum mechanics.
We propose a notion of quantum control in a quantum programming language which permits the superposition of finitely many quantum operations without performing a measurement. This notion takes the form of a conditional construct similar to the IF statement in classical programming languages. We show that adding such a quantum IF statement to the QPL programming language simplifies the presentation of several quantum algorithms. This motivates the possibility of extending the denotational semantics of QPL to include this form of quantum alternation. We give a denotational semantics for this extension of QPL based on Kraus decompositions rather than on superoperators. Finally, we clarify the relation between quantum alternation and recursion, and discuss the possibility of lifting the semantics defined by Kraus operators to the superoperator semantics defined by Selinger.
Quantum algorithms for tasks such as factorization, search, and simulation rely on control flow such as branching and iteration that depends on the value of data in superposition. High-level programming abstractions for control flow, such as switches, loops, higher-order functions, and continuations, are ubiquitous in classical languages. By contrast, many quantum languages do not provide high-level abstractions for control flow in superposition, and instead require the use of hardware-level logic gates to implement such control flow. The reason for this gap is that whereas a classical computer supports control flow abstractions using a program counter that can depend on data, the typical architecture of a quantum computer does not analogously provide a program counter that can depend on data in superposition. As a result, the complete set of control flow abstractions that can be correctly realized on a quantum computer has not yet been established. In this work, we provide a complete characterization of the properties of control flow abstractions that are correctly realizable on a quantum computer. First, we prove that even on a quantum computer whose program counter exists in superposition, one cannot correctly realize control flow in quantum algorithms by lifting the classical conditional jump instruction to work in superposition. This theorem denies the ability to directly lift general abstractions for control flow such as the λ-calculus from classical to quantum programming. In response, we present the necessary and sufficient conditions for control flow to be correctly realizable on a quantum computer. We introduce the quantum control machine, an instruction set architecture featuring a conditional jump that is restricted to satisfy these conditions. We show how this design enables a developer to correctly express control flow in quantum algorithms using a program counter in place of logic gates.
The classical lambda calculus may be regarded both as a programming language and as a formal algebraic system for reasoning about computation. It provides a computational model equivalent to the Turing machine and continues to be of enormous benefit in the classical theory of computation. We propose that quantum computation, like its classical counterpart, may benefit from a version of the lambda calculus suitable for expressing and reasoning about quantum algorithms. In this paper we develop a quantum lambda calculus as an alternative model of quantum computation, which combines some of the benefits of both the quantum Turing machine and the quantum circuit models. The calculus turns out to be closely related to the linear lambda calculi used in the study of linear logic. We set up a computational model and an equational proof system for this calculus, and we argue that it is equivalent to the quantum Turing machine.
In contrast to a classical bit, which can only take the value 000 or 111, its quantum counterpart -- a qubit -- can exist in a superposition of 000 and 111. This is a superposition of data values, naturally raising the question of whether one can superpose not only data but also programs. For example, a particular superposition of programs, known as the quantum SWITCH, has attracted much attention, and its implementations and computational advantages have been studied extensively within the physics community. A naive way to control a program by a qubit is by means of a controlled operation. Given an operation FFF, this amounts to considering an operation that behaves as FFF when the control qubit is ∣1⟩|1\rangle∣1⟩, and as the identity operation when the control qubit is ∣0⟩|0\rangle∣0⟩. This idea works well when FFF is a unitary operation, but it is not well-defined for a general quantum channel. By contrast, the quantum SWITCH is free from the well-definedness issue. This contrast leads to the key insight of this paper: controlled operations and the quantum SWITCH should be regarded as different kinds of quantum control mechanisms. Building on this insight, we develop a novel quantum programming language with quantum control and measurement that can express the quantum SWITCH over quantum channels. Using a semantic analysis based on program transformations, we identify the source of the ill-behavedness of controlled operations as the \emph{correspondence problem}: a lack of coordination between the measurements performed in the then- and else-branches of quantum conditional branching. We address this problem with a linear type system that enforces alignment of the quantum operations used in the two branches, yielding a well-behaved language capable of expressing the quantum SWITCH.