Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1803.10352 · Applied Physics Letters

Automated tuning of inter-dot tunnel coupling in double quantum dots

Cornelis Jacobus van Diepen, Pieter T. Eendebak, Bruno T. Buijtendorp, U. Mukhopadhyay, T. Fujita, Christian Reichl, W. Wegscheider, Lieven M. K. Vandersypen

Published Jul 16, 2018• 74 citations
arXivHTMLPDF

Abstract

Semiconductor quantum dot arrays defined electrostatically in a 2D electron gas provide a scalable platform for quantum information processing and quantum simulations. For the operation of quantum dot arrays, appropriate voltages need to be applied to the gate electrodes that define the quantum dot potential landscape. Tuning the gate voltages has proven to be a time-consuming task, because of initial electrostatic disorder and capacitive cross-talk effects. Here, we report on the automated tuning of the inter-dot tunnel coupling in gate-defined semiconductor double quantum dots. The automation of the tuning of the inter-dot tunnel coupling is the next step forward in scalable and efficient control of larger quantum dot arrays. This work greatly reduces the effort of tuning semiconductor quantum dots for quantum information processing and quantum simulation.

DOI
10.1063/1.5031034

Related papers

Colloquium : Advances in automation of quantum dot devices control

Justyna P. Zwolak, Jacob M. Taylor

Arrays of quantum dots (QDs) are a promising candidate system to realize scalable, coupled qubit systems and serve as a fundamental building block for quantum computers. In such semiconductor quantum systems, devices now have tens of individual electrostatic and dynamical voltages that must be carefully set to localize the system into the single-electron regime and to realize good qubit operational performance. The mapping of requisite QD locations and charges to gate voltages presents a challenging classical control problem. With an increasing number of QD qubits, the relevant parameter space grows sufficiently to make heuristic control unfeasible. In recent years, there has been considerable effort to automate device control that combines script-based algorithms with machine learning (ML) techniques. In this Colloquium, a comprehensive overview of the recent progress in the automation of QD device control is presented, with a particular emphasis on silicon- and GaAs-based QDs formed in two-dimensional electron gases. Combining physics-based modeling with modern numerical optimization and ML has proven effective in yielding efficient, scalable control. Further integration of theoretical, computational, and experimental efforts with computer science and ML holds vast potential in advancing semiconductor and other platforms for quantum computing.

arXiv:2112.09362•Reviews of Modern Physics•Feb 17, 2023•71 citations

Computer-automated tuning procedures for semiconductor quantum dot arrays

A. R. Mills, M. M. Feldman, C. Monical +4 more

As with any quantum computing platform, semiconductor quantum dot devices require sophisticated hardware and controls for operation. The increasing complexity of quantum dot devices necessitates the advancement of automated control software and image recognition techniques for rapidly evaluating charge stability diagrams. We use an image analysis toolbox developed in Python to automate the calibration of virtual gates, a process that previously involved a large amount of user intervention. Moreover, we show that straightforward feedback protocols can be used to simultaneously tune multiple tunnel couplings in a triple quantum dot in a computer automated fashion. Finally, we adopt the use of a “tunnel coupling lever arm” to model the interdot barrier gate response and discuss how it can be used to more rapidly tune interdot tunnel couplings to the gigahertz values that are compatible with exchange gates.

arXiv:1907.10775•Applied Physics Letters•Sep 9, 2019•67 citations

Multi-Dimensional Quantum Capacitance of the Two-Site Hubbard Model: The Role of Tunable Interdot Tunneling

Andrea Secchi, Filippo Troiani

Few-electron states confined in quantum-dot arrays are key objects in quantum computing. The discrimination between these states is essential for the readout of a (multi-)qubit state, and can be achieved through a measurement of the quantum capacitance within the gate-reflectometry approach. For a system controlled by several gates, the dependence of the measured capacitance on the direction of the oscillations in the voltage space is captured by the quantum capacitance matrix. Herein, we apply this tool to study a double quantum dot coupled to three gates, which enable the tuning of both the bias and the tunneling between the two dots. Analytical solutions for the two-electron case are derived within a Hubbard model, showing the overall dependence of the quantum capacitance matrix on the applied gate voltages. In particular, we investigate the role of the tunneling gate and reveal the possibility of exploiting interdot coherences in addition to charge displacements between the dots. Our results can be directly applied to double-dot experimental setups, and pave the way for further applications to larger arrays of quantum dots.

Entropy•Dec 31, 2022•4 citations

Automatic virtual voltage extraction of a 2x2 array of quantum dots with machine learning

Giovanni A. Oakes, Duan, Jingyu, John J. L. Morton +3 more

Spin qubits in quantum dots are a compelling platform for fault-tolerant quantum computing due to the potential to fabricate dense two-dimensional arrays with nearest neighbour couplings, a requirement to implement the surface code. However, due to the proximity of the surface gate electrodes, cross-coupling capacitances can be substantial, making it difficult to control each quantum dot independently. Increasing the number of quantum dots increases the complexity of the calibration process, which becomes impractical to do heuristically. Inspired by recent demonstrations of industrial-grade silicon quantum dot bilinear arrays, we develop a theoretical framework to mitigate the effect of cross-capacitances in 2x2 arrays of quantum dots and extend it to 2xN and NxN arrays. The method is based on extracting the gradients in gate-voltage space of different charge transitions in multiple two-dimensional charge stability diagrams to determine the system's virtual gates. To automate the process, we train an ensemble of regression models to extract the gradients from a Hough transformation of charge stability diagrams and validate the algorithm on simulated and experimental data of a 2x2 quantum dot array. Our method provides a completely automated tool to mitigate cross-capacitance effects in arrays of QDs which could be utilised to study variability in device electrostatics across large arrays.

arXiv:2012.03685•Dec 7, 2020•19 citations

Ray-based automatic tuning of a single quantum dot in a GaAs/AlGaAs quadruple dot array

Ehsan Alizadeh Kashtiban, Takafumi Fujita, A. Oiwa

Abstract Semiconductor quantum dot arrays, a key platform for spin-based quantum computing, face scalability challenges due to the time-consuming manual tuning of potential landscapes. This paper proposes that combining minimal one-dimensional voltage sweeps with machine learning offers a practical method for automating the tuning of four separate single quantum dots, inspired by the Ray-based Classification framework. Our method successfully tunes single quantum dots in a GaAs quadruple quantum dot device, while reducing the complexity of data acquisition and simplifying the tuning process.

Japanese Journal of Applied Physics•Jan 29, 2025•2 citations

Controlled quantum dot array segmentation via highly tunable interdot tunnel coupling

Martin Nurizzo, Baptiste Jadot, Pierre-André Mortemousque +8 more

Recent demonstrations using electron spins stored in quantum dot array as qubits are promising for developing a scalable quantum computing platform. An ongoing effort is, therefore, aiming at the precise control of the quantum dot parameters in larger and larger arrays which represents a complex challenge. Partitioning of the system with the help of the inter-dot tunnel barriers can lead to a simplification for tuning and offers a protection against unwanted charge displacement. In a triple quantum dot system, we demonstrate a nanosecond control of the inter-dot tunnel rate permitting to reach the two extreme regimes, large GHz tunnel coupling, and sub-Hz isolation between adjacent dots. We use this development to isolate a subpart of the array in a metastable configuration while performing charge displacement and readout in the rest of the system. The degree of control over tunnel coupling achieved in a unit cell should motivate future protocol development for tuning, manipulation, and readout including this capability.

arXiv:2207.09235•Applied Physics Letters•Aug 22, 2022•8 citations
Semiconductor quantum dot arrays defined electrostatically in a 2D electron gas provide a scalable platform for quantum information processing and quantum simulations. For the operation of quantum dot arrays, appropriate voltages need to be applied to the gate electrodes that define the quantum dot potential landscape. Tuning the gate voltages has proven to be a time-consuming task, because of initial electrostatic disorder and capacitive cross-talk effects. Here, we report on the automated tuning of the inter-dot tunnel coupling in gate-defined semiconductor double quantum dots. The automation of the tuning of the inter-dot tunnel coupling is the next step forward in scalable and efficient control of larger quantum dot arrays. This work greatly reduces the effort of tuning semiconductor quantum dots for quantum information processing and quantum simulation.
Arrays of quantum dots (QDs) are a promising candidate system to realize scalable, coupled qubit systems and serve as a fundamental building block for quantum computers. In such semiconductor quantum systems, devices now have tens of individual electrostatic and dynamical voltages that must be carefully set to localize the system into the single-electron regime and to realize good qubit operational performance. The mapping of requisite QD locations and charges to gate voltages presents a challenging classical control problem. With an increasing number of QD qubits, the relevant parameter space grows sufficiently to make heuristic control unfeasible. In recent years, there has been considerable effort to automate device control that combines script-based algorithms with machine learning (ML) techniques. In this Colloquium, a comprehensive overview of the recent progress in the automation of QD device control is presented, with a particular emphasis on silicon- and GaAs-based QDs formed in two-dimensional electron gases. Combining physics-based modeling with modern numerical optimization and ML has proven effective in yielding efficient, scalable control. Further integration of theoretical, computational, and experimental efforts with computer science and ML holds vast potential in advancing semiconductor and other platforms for quantum computing.
As with any quantum computing platform, semiconductor quantum dot devices require sophisticated hardware and controls for operation. The increasing complexity of quantum dot devices necessitates the advancement of automated control software and image recognition techniques for rapidly evaluating charge stability diagrams. We use an image analysis toolbox developed in Python to automate the calibration of virtual gates, a process that previously involved a large amount of user intervention. Moreover, we show that straightforward feedback protocols can be used to simultaneously tune multiple tunnel couplings in a triple quantum dot in a computer automated fashion. Finally, we adopt the use of a “tunnel coupling lever arm” to model the interdot barrier gate response and discuss how it can be used to more rapidly tune interdot tunnel couplings to the gigahertz values that are compatible with exchange gates.
Few-electron states confined in quantum-dot arrays are key objects in quantum computing. The discrimination between these states is essential for the readout of a (multi-)qubit state, and can be achieved through a measurement of the quantum capacitance within the gate-reflectometry approach. For a system controlled by several gates, the dependence of the measured capacitance on the direction of the oscillations in the voltage space is captured by the quantum capacitance matrix. Herein, we apply this tool to study a double quantum dot coupled to three gates, which enable the tuning of both the bias and the tunneling between the two dots. Analytical solutions for the two-electron case are derived within a Hubbard model, showing the overall dependence of the quantum capacitance matrix on the applied gate voltages. In particular, we investigate the role of the tunneling gate and reveal the possibility of exploiting interdot coherences in addition to charge displacements between the dots. Our results can be directly applied to double-dot experimental setups, and pave the way for further applications to larger arrays of quantum dots.
Spin qubits in quantum dots are a compelling platform for fault-tolerant quantum computing due to the potential to fabricate dense two-dimensional arrays with nearest neighbour couplings, a requirement to implement the surface code. However, due to the proximity of the surface gate electrodes, cross-coupling capacitances can be substantial, making it difficult to control each quantum dot independently. Increasing the number of quantum dots increases the complexity of the calibration process, which becomes impractical to do heuristically. Inspired by recent demonstrations of industrial-grade silicon quantum dot bilinear arrays, we develop a theoretical framework to mitigate the effect of cross-capacitances in 2x2 arrays of quantum dots and extend it to 2xN and NxN arrays. The method is based on extracting the gradients in gate-voltage space of different charge transitions in multiple two-dimensional charge stability diagrams to determine the system's virtual gates. To automate the process, we train an ensemble of regression models to extract the gradients from a Hough transformation of charge stability diagrams and validate the algorithm on simulated and experimental data of a 2x2 quantum dot array. Our method provides a completely automated tool to mitigate cross-capacitance effects in arrays of QDs which could be utilised to study variability in device electrostatics across large arrays.
Abstract Semiconductor quantum dot arrays, a key platform for spin-based quantum computing, face scalability challenges due to the time-consuming manual tuning of potential landscapes. This paper proposes that combining minimal one-dimensional voltage sweeps with machine learning offers a practical method for automating the tuning of four separate single quantum dots, inspired by the Ray-based Classification framework. Our method successfully tunes single quantum dots in a GaAs quadruple quantum dot device, while reducing the complexity of data acquisition and simplifying the tuning process.
Recent demonstrations using electron spins stored in quantum dot array as qubits are promising for developing a scalable quantum computing platform. An ongoing effort is, therefore, aiming at the precise control of the quantum dot parameters in larger and larger arrays which represents a complex challenge. Partitioning of the system with the help of the inter-dot tunnel barriers can lead to a simplification for tuning and offers a protection against unwanted charge displacement. In a triple quantum dot system, we demonstrate a nanosecond control of the inter-dot tunnel rate permitting to reach the two extreme regimes, large GHz tunnel coupling, and sub-Hz isolation between adjacent dots. We use this development to isolate a subpart of the array in a metastable configuration while performing charge displacement and readout in the rest of the system. The degree of control over tunnel coupling achieved in a unit cell should motivate future protocol development for tuning, manipulation, and readout including this capability.