Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1801.09481 · IEEE International Symposium on Information Theory (ISIT)

Almost Optimal Scaling of Reed-Muller Codes on BEC and BSC Channels

Hamed Hassani, Shrinivas Kudekar, Or Ordentlich, Yury Polyanskiy, Rudiger L. Urbanke

Published Jun 1, 2018• 1 citation
arXivHTMLPDF

Abstract

Consider a binary linear code of length N, minimum distance dmin, transmission over the binary erasure channel with parameter 00 if the minimum distance is large. In particular the width of the transition is of order O(1/√dmin). We strengthen this result by showing that under suitable conditions on the weight distribution of the code, the transition width can be as small as O(1/N1/2-κ), for any κ > 0, even if the minimum distance of the code is not linear. This condition applies e.g., to Reed-Mueller codes. Since O(1/N1/2) is the smallest transition possible for any code, we speak of “almost” optimal scaling. We emphasize that the width of the transition says nothing about the location of the transition. Therefore this result has no bearing on whether a code is capacity-achieving or not. As a second contribution, we present a new estimate on the derivative of the EXIT function, the proof of which is based on the Blowing-Up Lemma.

DOI
10.1109/isit.2018.8437453

Related papers

Almost Optimal Scaling of Reed-Muller Codes on BEC and BSC Channels

Or Ordentlich, Yury Polyanskiy

Consider a binary linear code of length N, minimum distance d-{\min}, transmission over the binary erasure channel with parameter 0 < \epsilon < 1 or the binary symmetric channel with parameter 0 < \epsilon < \frac{1}{2}, and block-MAP decoding. It was shown by Tillich and Zemor that in this case the error probability of the block-MAP decoder transitions 'quickly' from \delta to 1-\delta for any \delta > 0 if the minimum distance is large. In particular the width of the transition is of order O(1/\sqrt{d-{\min}}). We strengthen this result by showing that under suitable conditions on the weight distribution of the code, the transition width can be as small as \Theta(1/N^{\frac{1}{2}-\kappa}), for any \kappa > 0, even if the minimum distance of the code is not linear. This condition applies e.g., to Reed-Mueller codes. Since \Theta(1/N^{\frac{1}{2}}) is the smallest transition possible for any code, we speak of 'almost' optimal scaling. We emphasize that the width of the transition says nothing about the location of the transition. Therefore this result has no bearing on whether a code is capacity-achieving or not. As a second contribution, we present a new estimate on the derivative of the EXIT function, the proof of which is based on the Blowing-Up Lemma.

•Jun 1, 2018•16 citations

Comparing the bit-MAP and block-MAP decoding thresholds of reed-muller codes on BMS channels

Shrinivas Kudekar, Santhosh Kumar, Marco Mondelli +2 more

The question whether RM codes are capacity-achieving is a long-standing open problem in coding theory that was recently answered in the affirmative for transmission over erasure channels [1], [2]. Remarkably, the proof does not rely on specific properties of RM codes, apart from their symmetry. Indeed, the main technical result consists in showing that any sequence of linear codes, with doubly-transitive permutation groups, achieves capacity on the memoryless erasure channel under bit-MAP decoding. Thus, a natural question is what happens under block-MAP decoding. In [1], [2], by exploiting further symmetries of the code, the bit-MAP threshold was shown to be sharp enough so that the block erasure probability also converges to 0. However, this technique relies heavily on the fact that the transmission is over an erasure channel. We present an alternative approach to strengthen results regarding the bit-MAP threshold to block-MAP thresholds. This approach is based on a careful analysis of the weight distribution of RM codes. In particular, the flavor of the main result is the following: assume that the bit-MAP error probability decays as N−δ, for some δ > 0. Then, the block-MAP error probability also converges to 0. This technique applies to transmission over any binary memoryless symmetric channel. Thus, it can be thought of as a first step in extending the proof that RM codes are capacity-achieving to the general case.

arXiv:1601.06048•IEEE International Symposium on Information Theory (ISIT)•Jul 1, 2016•28 citations

From Bit to Block: Decoding on Erasure Channels

Henry D. Pfister, Oscar Sprumont, Gilles Zémor

We provide a general framework for bounding the block error threshold of a linear code$C \subseteq \mathbb{F}_{2}^{N}$over the erasure channel in terms of its bit error threshold. Our approach relies on understanding the minimum support weight of any$r$-dimensional subcode of$C$, for all small values of$r$. As a proof of concept, we use our machinery to obtain a new proof of the celebrated result that Reed-Muller codes achieve capacity on the erasure channel with respect to block error probability.

arXiv:2501.05748•IEEE International Symposium on Information Theory (ISIT)•Jun 22, 2025•5 citations

Beyond double transitivity: Capacity-achieving cyclic codes on erasure channels

Santhosh Kumar, Robert Calderbank, Henry D. Pfister

Recently, sequences of error-correcting codes with doubly-transitive permutation groups were shown to achieve capacity on erasure channels under symbol-wise maximum a posteriori (MAP) decoding. From this, it follows that Reed-Muller and primitive narrow-sense BCH codes achieve capacity in the same setting. In this article, we extend this result to a large family of cyclic codes by considering codes whose permutation groups satisfy a condition weaker than double transitivity. The article combines two simple technical contributions. First, we show that the transition width of a monotone boolean function is O(1/log k), where k is the size of the smallest orbit induced by its symmetry group. The proof is based on Talagrand's lower bound on influences for monotone boolean functions. Second, we consider the extrinsic information transfer (EXIT) function of an Fq-linear cyclic code whose blocklength N divides qt- 1 and is coprime with q - 1. We show that this EXIT function is a monotone boolean function whose symmetry group contains no orbits of size smaller than the smallest prime divisor of t. Combining these, we show that sequences of cyclic codes, whose blocklengths satisfy the above conditions, achieve capacity on the q-ary erasure channel if all prime divisors of t tend to infinity.

IEEE Information Theory Workshop (ITW)•Sep 1, 2016•10 citations

Explicit Polar Codes with Small Scaling Exponent

Hanwen Yao, Arman Fazeli, Alexander Vardy

Polar coding gives rise to the first explicit family of codes that provably achieve capacity for a wide range of channels with efficient encoding and decoding. But how fast can polar coding approach capacity as a function of the code length? In finite-length analysis, the scaling between code length and the gap to capacity is usually measured in terms of the scaling exponent μ. It is well known that the optimal scaling exponent, achieved by random binary codes, is μ = 2. It is also well known that the scaling exponent of conventional polar codes on the binary erasure channel (BEC) is μ = 3.627, which falls far short of the optimal value. On the other hand, it was recently shown that polar codes derived from ℓ × ℓ binary polarization kernels approach the optimal scaling exponent μ = 2 on the BEC as ℓ→∞, with high probability over a random choice of the kernel. Herein, we focus on explicit constructions of ℓ×ℓ binary kernels with small scaling exponent for ℓ ≤ 64. In particular, we exhibit a sequence of binary linear codes that approaches capacity on the BEC with quasi-linear complexity and scaling exponent μℓtransforms an underlying BEC into ℓ bit-channels W1, W2>,..., Wℓ. The erasure probabilities of W1, W2>,..., Wℓ, known as the polarization behavior of Kℓ, determine the resulting scaling exponent μ(Kℓ). We first introduce a class of self-dual binary kernels and prove that their polarization behavior satisfies a strong symmetry property. This reduces the problem of constructing Kℓto that of producing a certain nested chain of only ℓ/2 self-orthogonal codes. We use nested cyclic codes, whose distance is as high as possible subject to the orthogonality constraint, to construct the kernels K32and K64. In order to evaluate the polarization behavior of K32and K64, two alternative trellis representations (which may be of independent interest) are proposed. Using the resulting trellises, we show that μ(K32) = 3.122 and explicitly compute over half of the polarization-behavior coefficients for K64, at which point the complexity becomes prohibitive. To complete the computation, we introduce a Monte-Carlo interpolation method, which produces the estimate μ(K64) ≃ 2.87. We augment this estimate with a rigorous proof that μ(K64) <; 2.97.

arXiv:1901.08186•IEEE International Symposium on Information Theory (ISIT)•Jul 1, 2019•29 citations

On the stopping distance and the stopping redundancy of codes

M. Schwartz, Alexander Vardy

It is now well known that the performance of a linear code Copf under iterative decoding on a binary erasure channel (and other channels) is determined by the size of the smallest stopping set in the Tanner graph for Copf. Several recent papers refer to this parameter as the stopping distance s of Copf. This is somewhat of a misnomer since the size of the smallest stopping set in the Tanner graph for Copf depends on the corresponding choice of a parity-check matrix. It is easy to see that s les d, where d is the minimum Hamming distance of Copf, and we show that it is always possible to choose a parity-check matrix for Copf (with sufficiently many dependent rows) such that s=d. We thus introduce a new parameter, the stopping redundancy of Copf, defined as the minimum number of rows in a parity- check matrix H for Copf such that the corresponding stopping distance s(H) attains its largest possible value, namely, s(H)=d. We then derive general bounds on the stopping redundancy of linear codes. We also examine several simple ways of constructing codes from other codes, and study the effect of these constructions on the stopping redundancy. Specifically, for the family of binary Reed-Muller codes (of all orders), we prove that their stopping redundancy is at most a constant times their conventional redundancy. We show that the stopping redundancies of the binary and ternary extended Golay codes are at most 34 and 22, respectively. Finally, we provide upper and lower bounds on the stopping redundancy of MDS codes

arXiv:cs/0503058•IEEE Transactions on Information Theory•Mar 1, 2006•176 citations
Consider a binary linear code of length N, minimum distance dmin, transmission over the binary erasure channel with parameter 00 if the minimum distance is large. In particular the width of the transition is of order O(1/√dmin). We strengthen this result by showing that under suitable conditions on the weight distribution of the code, the transition width can be as small as O(1/N1/2-κ), for any κ > 0, even if the minimum distance of the code is not linear. This condition applies e.g., to Reed-Mueller codes. Since O(1/N1/2) is the smallest transition possible for any code, we speak of “almost” optimal scaling. We emphasize that the width of the transition says nothing about the location of the transition. Therefore this result has no bearing on whether a code is capacity-achieving or not. As a second contribution, we present a new estimate on the derivative of the EXIT function, the proof of which is based on the Blowing-Up Lemma.
Consider a binary linear code of length N, minimum distance d-{\min}, transmission over the binary erasure channel with parameter 0 < \epsilon < 1 or the binary symmetric channel with parameter 0 < \epsilon < \frac{1}{2}, and block-MAP decoding. It was shown by Tillich and Zemor that in this case the error probability of the block-MAP decoder transitions 'quickly' from \delta to 1-\delta for any \delta > 0 if the minimum distance is large. In particular the width of the transition is of order O(1/\sqrt{d-{\min}}). We strengthen this result by showing that under suitable conditions on the weight distribution of the code, the transition width can be as small as \Theta(1/N^{\frac{1}{2}-\kappa}), for any \kappa > 0, even if the minimum distance of the code is not linear. This condition applies e.g., to Reed-Mueller codes. Since \Theta(1/N^{\frac{1}{2}}) is the smallest transition possible for any code, we speak of 'almost' optimal scaling. We emphasize that the width of the transition says nothing about the location of the transition. Therefore this result has no bearing on whether a code is capacity-achieving or not. As a second contribution, we present a new estimate on the derivative of the EXIT function, the proof of which is based on the Blowing-Up Lemma.
The question whether RM codes are capacity-achieving is a long-standing open problem in coding theory that was recently answered in the affirmative for transmission over erasure channels [1], [2]. Remarkably, the proof does not rely on specific properties of RM codes, apart from their symmetry. Indeed, the main technical result consists in showing that any sequence of linear codes, with doubly-transitive permutation groups, achieves capacity on the memoryless erasure channel under bit-MAP decoding. Thus, a natural question is what happens under block-MAP decoding. In [1], [2], by exploiting further symmetries of the code, the bit-MAP threshold was shown to be sharp enough so that the block erasure probability also converges to 0. However, this technique relies heavily on the fact that the transmission is over an erasure channel. We present an alternative approach to strengthen results regarding the bit-MAP threshold to block-MAP thresholds. This approach is based on a careful analysis of the weight distribution of RM codes. In particular, the flavor of the main result is the following: assume that the bit-MAP error probability decays as N−δ, for some δ > 0. Then, the block-MAP error probability also converges to 0. This technique applies to transmission over any binary memoryless symmetric channel. Thus, it can be thought of as a first step in extending the proof that RM codes are capacity-achieving to the general case.
We provide a general framework for bounding the block error threshold of a linear codeC⊆F2NC \subseteq \mathbb{F}_{2}^{N}C⊆F2N​over the erasure channel in terms of its bit error threshold. Our approach relies on understanding the minimum support weight of anyrrr-dimensional subcode ofCCC, for all small values ofrrr. As a proof of concept, we use our machinery to obtain a new proof of the celebrated result that Reed-Muller codes achieve capacity on the erasure channel with respect to block error probability.
Recently, sequences of error-correcting codes with doubly-transitive permutation groups were shown to achieve capacity on erasure channels under symbol-wise maximum a posteriori (MAP) decoding. From this, it follows that Reed-Muller and primitive narrow-sense BCH codes achieve capacity in the same setting. In this article, we extend this result to a large family of cyclic codes by considering codes whose permutation groups satisfy a condition weaker than double transitivity. The article combines two simple technical contributions. First, we show that the transition width of a monotone boolean function is O(1/log k), where k is the size of the smallest orbit induced by its symmetry group. The proof is based on Talagrand's lower bound on influences for monotone boolean functions. Second, we consider the extrinsic information transfer (EXIT) function of an Fq-linear cyclic code whose blocklength N divides qt- 1 and is coprime with q - 1. We show that this EXIT function is a monotone boolean function whose symmetry group contains no orbits of size smaller than the smallest prime divisor of t. Combining these, we show that sequences of cyclic codes, whose blocklengths satisfy the above conditions, achieve capacity on the q-ary erasure channel if all prime divisors of t tend to infinity.
Polar coding gives rise to the first explicit family of codes that provably achieve capacity for a wide range of channels with efficient encoding and decoding. But how fast can polar coding approach capacity as a function of the code length? In finite-length analysis, the scaling between code length and the gap to capacity is usually measured in terms of the scaling exponent μ. It is well known that the optimal scaling exponent, achieved by random binary codes, is μ = 2. It is also well known that the scaling exponent of conventional polar codes on the binary erasure channel (BEC) is μ = 3.627, which falls far short of the optimal value. On the other hand, it was recently shown that polar codes derived from ℓ × ℓ binary polarization kernels approach the optimal scaling exponent μ = 2 on the BEC as ℓ→∞, with high probability over a random choice of the kernel. Herein, we focus on explicit constructions of ℓ×ℓ binary kernels with small scaling exponent for ℓ ≤ 64. In particular, we exhibit a sequence of binary linear codes that approaches capacity on the BEC with quasi-linear complexity and scaling exponent μℓtransforms an underlying BEC into ℓ bit-channels W1, W2>,..., Wℓ. The erasure probabilities of W1, W2>,..., Wℓ, known as the polarization behavior of Kℓ, determine the resulting scaling exponent μ(Kℓ). We first introduce a class of self-dual binary kernels and prove that their polarization behavior satisfies a strong symmetry property. This reduces the problem of constructing Kℓto that of producing a certain nested chain of only ℓ/2 self-orthogonal codes. We use nested cyclic codes, whose distance is as high as possible subject to the orthogonality constraint, to construct the kernels K32and K64. In order to evaluate the polarization behavior of K32and K64, two alternative trellis representations (which may be of independent interest) are proposed. Using the resulting trellises, we show that μ(K32) = 3.122 and explicitly compute over half of the polarization-behavior coefficients for K64, at which point the complexity becomes prohibitive. To complete the computation, we introduce a Monte-Carlo interpolation method, which produces the estimate μ(K64) ≃ 2.87. We augment this estimate with a rigorous proof that μ(K64) <; 2.97.
It is now well known that the performance of a linear code Copf under iterative decoding on a binary erasure channel (and other channels) is determined by the size of the smallest stopping set in the Tanner graph for Copf. Several recent papers refer to this parameter as the stopping distance s of Copf. This is somewhat of a misnomer since the size of the smallest stopping set in the Tanner graph for Copf depends on the corresponding choice of a parity-check matrix. It is easy to see that s les d, where d is the minimum Hamming distance of Copf, and we show that it is always possible to choose a parity-check matrix for Copf (with sufficiently many dependent rows) such that s=d. We thus introduce a new parameter, the stopping redundancy of Copf, defined as the minimum number of rows in a parity- check matrix H for Copf such that the corresponding stopping distance s(H) attains its largest possible value, namely, s(H)=d. We then derive general bounds on the stopping redundancy of linear codes. We also examine several simple ways of constructing codes from other codes, and study the effect of these constructions on the stopping redundancy. Specifically, for the family of binary Reed-Muller codes (of all orders), we prove that their stopping redundancy is at most a constant times their conventional redundancy. We show that the stopping redundancies of the binary and ternary extended Golay codes are at most 34 and 22, respectively. Finally, we provide upper and lower bounds on the stopping redundancy of MDS codes