Rapid High-fidelity Multiplexed Readout of Superconducting Qubits
Johannes Heinsoo, Christian Kraglund Andersen, Ants Remm, Sebastian Krinner, Theodore Walter, Yves Salathé, Simone Gasparinetti, Jean-Claude Besse, Anton Potočnik, Andreas J. Wallraff, Christopher Eichler
Fast, high-fidelity readout of qubits is crucial in quantum computing. Quantum error correction in particular requires the repeated measurement of subsets of qubits without perturbing any others. Achieving this goal in a multiplexed readout architecture has been challenging, mainly due to the crosstalk of readout signals. In this work, individual Purcell filters are used for each readout resonator to protect the qubits from untargeted readout signals, and from radiative decay. By implementing this scheme, which could find broad use in near-term multiqubit devices, the authors demonstrate the $s\phantom{\rule{0}{0ex}}i\phantom{\rule{0}{0ex}}m\phantom{\rule{0}{0ex}}u\phantom{\rule{0}{0ex}}l\phantom{\rule{0}{0ex}}t\phantom{\rule{0}{0ex}}a\phantom{\rule{0}{0ex}}n\phantom{\rule{0}{0ex}}e\phantom{\rule{0}{0ex}}o\phantom{\rule{0}{0ex}}u\phantom{\rule{0}{0ex}}s$ readout of up to five qubits.
Fast, high-fidelity readout of qubits is crucial in quantum computing. Quantum error correction in particular requires the repeated measurement of subsets of qubits without perturbing any others. Achieving this goal in a multiplexed readout architecture has been challenging, mainly due to the crosstalk of readout signals. In this work, individual Purcell filters are used for each readout resonator to protect the qubits from untargeted readout signals, and from radiative decay. By implementing this scheme, which could find broad use in near-term multiqubit devices, the authors demonstrate the s\phantom{\rule{0}{0ex}}i\phantom{\rule{0}{0ex}}m\phantom{\rule{0}{0ex}}u\phantom{\rule{0}{0ex}}l\phantom{\rule{0}{0ex}}t\phantom{\rule{0}{0ex}}a\phantom{\rule{0}{0ex}}n\phantom{\rule{0}{0ex}}e\phantom{\rule{0}{0ex}}o\phantom{\rule{0}{0ex}}u\phantom{\rule{0}{0ex}}s readout of up to five qubits.
Fast, high-fidelity, and low back-action readout plays a crucial role in the advancement of quantum error correction (QEC). Here, we demonstrate high-performance multiplexed readout of superconducting qubits using a tunable broadband Purcell filter, effectively resolving the fundamental trade-off between measurement speed and photon-noise-induced dephasing. By dynamically tuning the filter parameters, we suppress photon-noise-induced dephasing by a factor of 7 in idle status, while enabling rapid, high-fidelity readout in measurement status. We achieve 99.6\% single-shot readout fidelity with 100~ns readout pulse, limited primarily by relaxation errors during readout. Using a multilevel readout protocol, we further attain 99.9\% fidelity in 50~ns. Simultaneous readout of three qubits using 100~ns pulses achieves an average fidelity of 99.5\% with low crosstalk. Additionally, the readout exhibits high quantum-nondemolition (QND) performance: 99.4\% fidelity over repeated measurements and a low leakage rate below 0.1\%. Building on the tunable broadband filter, we further propose a scalable readout scheme for surface code QEC with enhanced multiplexing capability, offering a promising solution for fast and scalable QEC.
Fast and accurate qubit measurement remains a critical challenge on the path to fault-tolerant quantum computing. In superconducting quantum circuits, fast qubit measurement has been achieved using a dispersively coupled resonator with a large externally limited linewidth. This necessitates the use of a Purcell filter that protects the qubit from relaxation through the readout channel. Here, we show that a readout resonator and filter resonator, coupled to each other both capacitively and inductively via a multiconductor transmission line, can produce a compact notch-filter circuit that effectively eliminates the Purcell decay channel through destructive interference. By utilizing linewidths as large as 42 MHz, we perform simultaneous readout of four qubits using a 56-ns integration window and benchmark an average assignment fidelity of 99.77%, with the highest qubit assignment fidelity exceeding 99.9%. Including the simulated readout ring-down time, the total readout duration was between 115 and 215 ns for the four qubits, which we anticipate can be reduced to around 100 ns with active ring-down pulse shaping. These results demonstrate a significant advancement in speed and fidelity for multiplexed superconducting-qubit readout.
The performance of a wide range of quantum computing algorithms and protocols depends critically on the fidelity and speed of the employed qubit readout. Examples include gate sequences benefiting from midcircuit real-time measurement-based feedback, such as qubit initialization, entanglement generation, teleportation, and, perhaps most importantly, quantum error correction. A prominent and widely used readout approach is based on the dispersive interaction of a superconducting qubit strongly coupled to a large-bandwidth readout resonator, frequently combined with a dedicated or shared Purcell filter protecting qubits from decay. By dynamically reducing the qubit-resonator detuning and thus increasing the dispersive shift, we demonstrate a beyond-state-of-the-art two-state-readout error of only 0.25% in 100-ns integration time. Maintaining low-readout-drive strength, we nearly quadruple the signal-to-noise ratio of the readout by doubling the readout-mode line width, which we quantify by considering the hybridization of the readout resonator and its dedicated Purcell filter. We find excellent agreement between our experimental data and our theoretical model. The presented results are expected to further boost the performance of new and existing algorithms and protocols critically depending on high-fidelity fast midcircuit measurements. Published by the American Physical Society 2024
Quantum computing requires a delicate balance between coupling quantum systems to external instruments for control and readout, while providing enough isolation from sources of decoherence. Circuit quantum electrodynamics has been a successful method for protecting superconducting qubits, while maintaining the ability to perform readout [1, 2]. Here, we discuss improvements to this method that allow for fast, high-fidelity readout. Specifically, the integration of a Purcell filter, which allows us to increase the resonator bandwidth for fast readout, the incorporation of a Josephson parametric converter, which enables us to perform high-fidelity readout by amplifying the readout signal while adding the minimum amount of noise required by quantum mechanics, and custom control electronics, which provide us with the capability of fast decision and control.
Hardware-efficient methods for high-fidelity quantum state measurements are crucial for superconducting qubit experiments, as qubit numbers grow and feedback and state reset begin to be employed for quantum error correction. We present a three-dimensional reentrant-cavity filter designed for frequency-multiplexed readout of superconducting qubits. The cavity filter is situated out of the plane of the qubit circuit and capacitively couples to an array of on-chip readout resonators in a manner that can scale to large qubit arrays. The reentrant cavity functions as a large-linewidth bandpass filter with intrinsic Purcell filtering. We demonstrate the concept with a four-qubit multiplexed device in which we achieve an average readout fidelity of 98.6% and measurement-induced crosstalk dephasing rates below 0.15 kHz.
Purcell filters, which serve to suppress electromagnetic radiation and enhance the readout efficiency of qubit, are an indispensable component in superconducting quantum chips. With the increasing scale of quantum chips, the requirements for the performance and scalability of Purcell filters are becoming more stringent. In this report, a novel four-stage Purcell filter that enables fast measurement without exacerbating environmental damping of the qubits is presented. The design approach of the filter is derived from the serial and parallel configurations of λ/4 resonant cavities. The filter exhibits exceptional passband-to-stopband isolation, reaching up to 40 dB of isolation within the transition range of 400 MHz. Furthermore, the filter boasts a wide bandwidth for both the stopband and the passband, with the stopband ranging from 4 to 5.5 GHz and the passband extending from 5.8 to 6.5 GHz. In terms of spatial arrangement, each filter can be connected to over ten readout resonators for qubit readout. This innovative Purcell filter will significantly contribute to the development of high quality, scalable superconducting quantum chips.