Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1801.03755 · Physical Review Applied

Tuning Methods for Semiconductor Spin Qubits

Tim Botzem, Michael D. Shulman, Sandra Foletti, Shannon P. Harvey, Oliver Dial, Patrick Bethke, Pascal Cerfontaine, Robert P. G. McNeil, D. Mahalu, V. Umansky, Arne Ludwig, Andreas Dirk Wieck, Dieter Schuh, Dominique Bougeard, Amir Yacoby, Hendrik Bluhm

Published Nov 9, 2018• 56 citations
arXivHTMLPDF

Abstract

Recent progress on increasingly complex devices based on semiconductor spin qubits shows that automated methods are indispensable for efficient device characterization and further scale-up. The authors present fast, fully automated procedures to extract key device parameters, as well as various readout and initialization points for operating a two-electron qubit. These efficient, quantitative methods can be the basis for automatic tune-up, in which gate voltages are iteratively adjusted based on the deviation of measured parameters from targets. This would enable operation of devices with more and more qubits, and systematically optimize fabrication procedures.

DOI
10.1103/physrevapplied.10.054026

Related papers

A machine learning approach for automated fine-tuning of semiconductor spin qubits

Julian D. Teske, Simon Humpohl, René Otten +6 more

While spin qubits based on gate-defined quantum dots have demonstrated very favorable properties for quantum computing, one remaining hurdle is the need to tune each of them into a good operating regime by adjusting the voltages applied to electrostatic gates. The automation of these tuning procedures is a necessary requirement for the operation of a quantum processor based on gate-defined quantum dots, which is yet to be fully addressed. We present an algorithm for the automated fine-tuning of quantum dots and demonstrate its performance on a semiconductor singlet-triplet qubit in GaAs. The algorithm employs a Kalman filter based on Bayesian statistics to estimate the gradients of the target parameters as a function of gate voltages, thus learning the system response. The algorithm's design is focused on the reduction of the number of required measurements. We experimentally demonstrate the ability to change the operation regime of the qubit within 3–5 iterations, corresponding to 10–15 min of lab-time.

arXiv:1901.01972•Applied Physics Letters•Apr 1, 2019•60 citations

Overcoming Configuration Bottleneck: Modular Pathways to Stable Semiconductor Spin-Qubit Arrays

Justyna P. Zwolak, Anthony Sigillito

Over the past decade, semiconductor spin qubits have progressed from few-qubit demonstrations towards larger-scale devices fabricated in increasingly reproducible academic and industrial processes. This progress marks an inflection point: the central challenge is no longer to demonstrate high-fidelity operation in carefully tuned devices, but to discover, verify, and maintain stable operating conditions reliably across many interdependent controls, varied device geometries, and disparate material platforms. In this Perspective, we frame spin-qubit operation as a modular automation problem. We decompose the workflow into five modules: bootstrapping from minimal prior information, configuration tuning, virtualization of physical gates into effective control axes, qubit-level tuning, and an operation layer with drift-aware maintenance. Using recent demonstrations from our work and the broader community, we argue that scalability will depend on explicit interfaces between modules, standardized intermediate data products, and workflow-level metrics such as throughput, success probability, stability time, recovery time, and robustness. We close by outlining the infrastructure needed to move beyond isolated tuning demonstrations toward sustained operation: qubit-performance-aware feedback, reusable software and benchmark tasks, and tight collaboration among experimental, theoretical, and software efforts.

quant-pharXiv:2606.30883•Jul 1, 2026•0 citations

Automated All-RF Tuning for Spin Qubit Readout and Control

Cornelius Carlsson, Jaime Saez-Mollejo, Federico Fedele +5 more

Efficient tuning of spin qubits remains a major bottleneck in scaling semiconductor quantum dot-based quantum processors. A key challenge is the rapid identification of gate voltage regimes suitable for qubit initialisation, control, and readout. Here, we leverage radio-frequency charge sensing to automate spin qubit tuning, achieving a median tuning time of approximately 15 minutes. In a single continuous run, our routine identifies spin qubits at 12 distinct charge transitions in under 17 hours. Beyond tuning, our routine autonomously acquires data revealing the gate-voltage dependence of the exchange interaction, dephasing time, and quality factor -- quantities that vary substantially between charge configurations. These results represent a step change in high-throughput spin qubit tuning and provide a foundation for a systematic and automated exploration of semiconductor quantum circuits.

arXiv:2506.10834•Jun 12, 2025•7 citations

Automatic tuning of a donor in a silicon quantum device using machine learning

Brandon Severin, Tim Botzem, Federico Fedele +12 more

Donor spin qubits in silicon offer one- and two-qubit gates with fidelities beyond 99%, coherence times exceeding 30 seconds, and compatibility with industrial manufacturing methods. This motivates the development of large-scale quantum processors using this platform, and the ability to automatically tune and operate such complex devices. In this work, we present the first machine learning algorithm with the ability to automatically locate the charge transitions of an ion-implanted donor in a silicon device, tune single-shot charge readout, and identify the gate voltage parameters where tunnelling rates in and out the donor site are the same. The entire tuning pipeline is completed on the order of minutes. Our results enable both automatic characterisation and tuning of a donor in silicon devices faster than human experts.

cond-mat.mes-hallCross-listedarXiv:2511.04543•Nov 7, 2025•0 citations

Characterisation and fully autonomous tuning of spin qubits with machine learning

Jonas Schuff

Spanning over two decades, the study of qubits in semiconductors for quantum computing has yielded significant breakthroughs. However, the development of large-scale semiconductor quantum circuits is still limited by challenges in efficiently tuning and operating these circuits. Identifying optimal operating conditions for these qubits is complex, involving the exploration of vast parameter spaces. This presents a real ‘needle in the haystack’ problem, which, until now, has resisted complete automation due to device variability, fabrication imperfections, and limited data availability. In this thesis, I first present a machine learning algorithm capable of automatically identifying Pauli spin blockade (PSB) using charge transport measurements. PSB can be employed as a resource for spin qubit initialisation and readout but it can be difficult to identify. The scarcity of PSB data is circumvented by training the algorithm with simulated data and by using cross-device validation. I demonstrate the approach on a silicon field-effect transistor device and report a high accuracy on test devices, giving evidence that the approach is robust to device variability. Then, I present the first fully autonomous tuning of a semiconductor qubit, from a grounded device to Rabi oscillations, a clear indication of successful qubit operation. This automation, achieved without human intervention, is demonstrated in a Ge/Si core/shell nanowire device and integrates deep learning, Bayesian optimisation, and computer vision techniques. Further, I demonstrate the potential of full automation by characterising how the Rabi frequency and g-factor depend on barrier gate voltages for qubits in four different charge transitions. The data reveals that certain features in charge transport measurements can enhance automated tuning processes by recognising the conditions for successful readout. Finally, I present the autonomous optimisation of two qubits for maximal Rabi frequency. This optimisation extends the tuning algorithm, enabling it to enhance the performance of a qubit. I hope the mass tuning and characterisation of qubits, enabled by the methods in this thesis, will create a productive feedback loop between measurement and fabrication processes. Wafer-scale, high-throughput characterisation of quantum devices can mitigate device variability and contribute to their scalability. The continued evolution of these methods will support the growing demands of the field, ultimately – and hopefully – leading to practical and powerful quantum computers.

•Jan 1, 2024•0 citations

Semiconductor Spin Qubits — A Scalable Platform for Quantum Computing?

Hendrik Bluhm, Lars R. Schreiber

For the realization of a quantum computer, a good qubit design as the basic building block is a nontrivial starting point. To fully leverage the potential of quantum computing, quantum processors will likely have to incorporate billions of high-quality qubits. Several approaches are being pursued and exhibit different strength and weaknesses. The device concepts and fabrication procedures for semiconductor based qubits are very similar to those used in the semiconductor industry. Using the spin-degree of freedom, their coherence properties and the quality of single-qubit operations have now reached the required level and are on par with competing approaches. Two-qubit operations will likely follow suit in the near future. With these basic requirements being met, it is now time to think if and how increasingly large multi-qubit systems and eventually functional quantum processor can be realized. This quest raises many pertinent questions, some of which equally apply to other qubit platforms. How reproducibly can the different types of semiconductor qubits be produced? How can their operating point be adjusted efficiently and in an automated way? How can they be connected to form meaningful multi-qubit circuits? How severe are multi-qubit control issues such as crosstalk and frequency crowding, and how can they be avoided? What control system architectures are most suitable for operating large numbers of qubits? What is the limit of cryogenic electronics regarding power consumption and integration density? This paper gives a (partial) overview of the state of the art in the field and discusses future challenges associated with the realization of large-scale quantum processors, many of which will greatly benefit from input from engineering science. The guiding vision is that of a highly integrated quantum processor with an ultra-low power cryogenic control system.

IEEE International Symposium on Circuits and Systems proceedings•May 1, 2019•33 citations
Recent progress on increasingly complex devices based on semiconductor spin qubits shows that automated methods are indispensable for efficient device characterization and further scale-up. The authors present fast, fully automated procedures to extract key device parameters, as well as various readout and initialization points for operating a two-electron qubit. These efficient, quantitative methods can be the basis for automatic tune-up, in which gate voltages are iteratively adjusted based on the deviation of measured parameters from targets. This would enable operation of devices with more and more qubits, and systematically optimize fabrication procedures.
While spin qubits based on gate-defined quantum dots have demonstrated very favorable properties for quantum computing, one remaining hurdle is the need to tune each of them into a good operating regime by adjusting the voltages applied to electrostatic gates. The automation of these tuning procedures is a necessary requirement for the operation of a quantum processor based on gate-defined quantum dots, which is yet to be fully addressed. We present an algorithm for the automated fine-tuning of quantum dots and demonstrate its performance on a semiconductor singlet-triplet qubit in GaAs. The algorithm employs a Kalman filter based on Bayesian statistics to estimate the gradients of the target parameters as a function of gate voltages, thus learning the system response. The algorithm's design is focused on the reduction of the number of required measurements. We experimentally demonstrate the ability to change the operation regime of the qubit within 3–5 iterations, corresponding to 10–15 min of lab-time.
Over the past decade, semiconductor spin qubits have progressed from few-qubit demonstrations towards larger-scale devices fabricated in increasingly reproducible academic and industrial processes. This progress marks an inflection point: the central challenge is no longer to demonstrate high-fidelity operation in carefully tuned devices, but to discover, verify, and maintain stable operating conditions reliably across many interdependent controls, varied device geometries, and disparate material platforms. In this Perspective, we frame spin-qubit operation as a modular automation problem. We decompose the workflow into five modules: bootstrapping from minimal prior information, configuration tuning, virtualization of physical gates into effective control axes, qubit-level tuning, and an operation layer with drift-aware maintenance. Using recent demonstrations from our work and the broader community, we argue that scalability will depend on explicit interfaces between modules, standardized intermediate data products, and workflow-level metrics such as throughput, success probability, stability time, recovery time, and robustness. We close by outlining the infrastructure needed to move beyond isolated tuning demonstrations toward sustained operation: qubit-performance-aware feedback, reusable software and benchmark tasks, and tight collaboration among experimental, theoretical, and software efforts.
Efficient tuning of spin qubits remains a major bottleneck in scaling semiconductor quantum dot-based quantum processors. A key challenge is the rapid identification of gate voltage regimes suitable for qubit initialisation, control, and readout. Here, we leverage radio-frequency charge sensing to automate spin qubit tuning, achieving a median tuning time of approximately 15 minutes. In a single continuous run, our routine identifies spin qubits at 12 distinct charge transitions in under 17 hours. Beyond tuning, our routine autonomously acquires data revealing the gate-voltage dependence of the exchange interaction, dephasing time, and quality factor -- quantities that vary substantially between charge configurations. These results represent a step change in high-throughput spin qubit tuning and provide a foundation for a systematic and automated exploration of semiconductor quantum circuits.
Donor spin qubits in silicon offer one- and two-qubit gates with fidelities beyond 99%, coherence times exceeding 30 seconds, and compatibility with industrial manufacturing methods. This motivates the development of large-scale quantum processors using this platform, and the ability to automatically tune and operate such complex devices. In this work, we present the first machine learning algorithm with the ability to automatically locate the charge transitions of an ion-implanted donor in a silicon device, tune single-shot charge readout, and identify the gate voltage parameters where tunnelling rates in and out the donor site are the same. The entire tuning pipeline is completed on the order of minutes. Our results enable both automatic characterisation and tuning of a donor in silicon devices faster than human experts.
Spanning over two decades, the study of qubits in semiconductors for quantum computing has yielded significant breakthroughs. However, the development of large-scale semiconductor quantum circuits is still limited by challenges in efficiently tuning and operating these circuits. Identifying optimal operating conditions for these qubits is complex, involving the exploration of vast parameter spaces. This presents a real ‘needle in the haystack’ problem, which, until now, has resisted complete automation due to device variability, fabrication imperfections, and limited data availability. In this thesis, I first present a machine learning algorithm capable of automatically identifying Pauli spin blockade (PSB) using charge transport measurements. PSB can be employed as a resource for spin qubit initialisation and readout but it can be difficult to identify. The scarcity of PSB data is circumvented by training the algorithm with simulated data and by using cross-device validation. I demonstrate the approach on a silicon field-effect transistor device and report a high accuracy on test devices, giving evidence that the approach is robust to device variability. Then, I present the first fully autonomous tuning of a semiconductor qubit, from a grounded device to Rabi oscillations, a clear indication of successful qubit operation. This automation, achieved without human intervention, is demonstrated in a Ge/Si core/shell nanowire device and integrates deep learning, Bayesian optimisation, and computer vision techniques. Further, I demonstrate the potential of full automation by characterising how the Rabi frequency and g-factor depend on barrier gate voltages for qubits in four different charge transitions. The data reveals that certain features in charge transport measurements can enhance automated tuning processes by recognising the conditions for successful readout. Finally, I present the autonomous optimisation of two qubits for maximal Rabi frequency. This optimisation extends the tuning algorithm, enabling it to enhance the performance of a qubit. I hope the mass tuning and characterisation of qubits, enabled by the methods in this thesis, will create a productive feedback loop between measurement and fabrication processes. Wafer-scale, high-throughput characterisation of quantum devices can mitigate device variability and contribute to their scalability. The continued evolution of these methods will support the growing demands of the field, ultimately – and hopefully – leading to practical and powerful quantum computers.
For the realization of a quantum computer, a good qubit design as the basic building block is a nontrivial starting point. To fully leverage the potential of quantum computing, quantum processors will likely have to incorporate billions of high-quality qubits. Several approaches are being pursued and exhibit different strength and weaknesses. The device concepts and fabrication procedures for semiconductor based qubits are very similar to those used in the semiconductor industry. Using the spin-degree of freedom, their coherence properties and the quality of single-qubit operations have now reached the required level and are on par with competing approaches. Two-qubit operations will likely follow suit in the near future. With these basic requirements being met, it is now time to think if and how increasingly large multi-qubit systems and eventually functional quantum processor can be realized. This quest raises many pertinent questions, some of which equally apply to other qubit platforms. How reproducibly can the different types of semiconductor qubits be produced? How can their operating point be adjusted efficiently and in an automated way? How can they be connected to form meaningful multi-qubit circuits? How severe are multi-qubit control issues such as crosstalk and frequency crowding, and how can they be avoided? What control system architectures are most suitable for operating large numbers of qubits? What is the limit of cryogenic electronics regarding power consumption and integration density? This paper gives a (partial) overview of the state of the art in the field and discusses future challenges associated with the realization of large-scale quantum processors, many of which will greatly benefit from input from engineering science. The guiding vision is that of a highly integrated quantum processor with an ultra-low power cryogenic control system.