Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1712.03554 · IEEE Transactions on Computers

Simulation of Quantum Circuits via Stabilizer Frames

Héctor J. García, Igor L. Markov

Published Oct 7, 2014• 28 citations
arXivHTMLPDF

Abstract

Generic quantum-circuit simulation appears intractable for conventional computers and may be unnecessary because useful quantum circuits exhibit significant structure that can be exploited during simulation. For example, Gottesman and Knill identified an important subclass, called stabilizer circuits, which can be simulated efficiently using group-theory techniques and insights from quantum physics. Realistic circuits enriched with quantum error-correcting codes and fault-tolerant procedures are dominated by stabilizer subcircuits and contain a relatively small number of non-Clifford components. Therefore, we develop new data structures and algorithms that facilitate parallel simulation of such circuits. Stabilizer frames offer more compact storage than previous approaches but require more sophisticated bookkeeping. Our implementation, called Quipu, simulates certain quantum arithmetic circuits (e.g., reversible ripple-carry adders) in polynomial time and space for equal superpositions of n-qubits. On such instances, known linear-algebraic simulation techniques, such as the (state-of-the-art) BDD-based simulator QuIDDPro, take exponential time. We simulate quantum Fourier transform and quantum fault-tolerant circuits using Quipu, and the results demonstrate that our stabilizer-based technique empirically outperforms QuIDDPro in all cases. While previous high-performance, structure-aware simulations of quantum circuits were difficult to parallellize, we demonstrate that Quipu can be parallelized with a nontrivial computational speedup.

DOI
10.1109/tc.2014.2360532

Related papers

Quipu: High-performance simulation of quantum circuits using stabilizer frames

Héctor J. García, Igor L. Markov

As quantum information processing gains traction, its simulation becomes increasingly significant for engineering purposes - evaluation, testing and optimization - as well as for theoretical research. Generic quantum-circuit simulation appears intractable for conventional computers. However, Gottesman and Knill identified an important subclass, called stabilizer circuits, which can be simulated efficiently using group-theory techniques. Practical circuits enriched with quantum error-correcting codes and fault-tolerant procedures are dominated by stabilizer subcircuits and contain a relatively small number of non-stabilizer components. Therefore, we develop new group-theory data structures and algorithms to simulate such circuits. Stabilizer frames offer more compact storage than previous approaches but requires more sophisticated bookkeeping. Our implementation, called Quipu, simulates certain quantum arithmetic circuits (e.g., ripple-carry adders) in polynomial time and space for equal superpositions of n-qubits. On such instances, known linear-algebraic simulation techniques, such as the (state-of-the-art) BDD-based simulator QuIDDPro, take exponential time. We simulate various quantum Fourier transform and quantum fault-tolerant circuits with Quipu, and the results demonstrate that our stabilizer-based technique outperforms QuIDDPro in all cases.

IEEE International Conference on Computer Design: VLSI in Computers and Processors (ICCD)•Oct 1, 2013•5 citations

Further improvements to stabilizer simulation theory: classical rewriting of CSS-preserving stabilizer circuits, quadratic form expansions of stabilizer operations, and framed hidden variable models

Vsevolod I. Yashin, Vladimir V. Yatsulevich, Aleksey K. Fedorov +1 more

Simulation of stabilizer circuits is a well-studied problem in quantum information processing, with a number of highly optimized algorithms available. Yet, we argue that further improvements can arise from the theoretical structure of stabilizer operations themselves. We focus on the subclass of stabilizer circuits composed of Calderbank-Shor-Steane (CSS)-preserving stabilizer operations, which naturally appear in fault-tolerant computations over CSS stabilizer codes. Using elementary circuit transformation techniques, we show that such circuits can be exactly rewritten as classical probabilistic circuits that reproduce measurement statistics. This rewriting introduces no computational overhead, in contrast to the general case of stabilizer circuits. To clarify the origin of this simplification, we introduce the standard quadratic form representation of general stabilizer operations (Clifford channels). It provides an efficient way to describe compositions of stabilizer operations and thus to simulate stabilizer circuits. CSS-preserving operations correspond to purely linear forms, which under a Walsh-Hadamard-Fourier transform yield a noncontextual hidden variable model, providing an alternative proof of the introduced rewriting. Finally, we develop a theory of reference frames for multiqubit systems, where frames are encoded by quadratic forms. This allows us to express stabilizer operations as probabilistic maps for proper reference frames. Non-CSS-preserving stabilizer circuits require dynamical modifications of reference frames, embodying a contextuality resource that leads to the computational overhead. This framework provides a new perspective on simulating stabilizer and near-stabilizer circuits within dynamically evolving quasiprobability models.

quant-pharXiv:2511.05478•Nov 10, 2025•3 citations

Hybrid Techniques for Simulating Quantum Circuits using the Heisenberg Representation.

Hector J. Garcia-Ramirez

Simulation of quantum information processing remains a major challenge with important applications in quantum computer science and engineering. Generic quantum-circuit simulation appears intractable for conventional computers and may be unnecessary because useful quantum circuits exhibit significant structure that can be exploited during simulation. For example, Gottesman and Knill identified an important subclass, called stabilizer circuits, which can be simulated efficiently using the Heisenberg representation for quantum computers. Stabilizer circuits are exclusively composed of stabilizer gates -- Hadamard, Phase and CNOT -- followed by one-qubit measurements in the computational basis. Such circuits are applied to a computational-basis state and produce so-called stabilizer states. Aaronson and Gottesman generalized stabilizer-circuit simulation to additionally handle a small number of non-stabilizer gates. We design new, more efficient data structures and algorithms for such beyond-stabilizer simulation using superpositions of stabilizer states. One such data structure, a stabilizer frame, offers more compact storage than previous approaches but require additional algorithms to maintain the global phases of each state in the superposition. To explore the advantages and limitations of our technique, we analyze the geometric structure of stabilizer states and their embedding in Hilbert space. Our analysis includes results on the computational geometry of stabilizer states such as efficient algorithms for computing distances, angles and volumes between them. The main advantages of using stabilizer-state superpositions to simulate quantum circuits are: (i) stabilizer subcircuits are simulated with high efficiency, (ii) superpositions can be restructured and compressed on the fly during simulation to reduce resource requirements, and (iii) operations performed on such superpositions lend themselves to distributed or asynchronous processing. Our software implementation, called Quipu, simulates certain quantum arithmetic circuits (e.g., reversible ripple-carry adders) and quantum Fourier transform circuits in polynomial time and space for specific input states. On such instances, known linear-algebraic simulation techniques, such as the (state-of-the-art) BDD-based simulator QuIDDPro, take exponential time. We simulate quantum fault-tolerant circuits using Quipu, and the results indicate that our stabilizer-based technique empirically outperforms QuIDDPro in all cases. While previous structure-aware simulations of quantum circuits were difficult to parallellize, we demonstrate a parallel version of Quipu that achieves a nontrivial speedup.

•Jan 1, 2014•3 citations

Efficient quantum circuit simulation.

John P. Hayes, Igor L. Markov, George F. Viamontes

Quantum-mechanical phenomena are playing an increasing role in information processing as transistor sizes approach the nanometer level, while the securest forms of communication rely on quantum data encoding. When they involve a finite number of basis states, these phenomena can be modeled as quantum circuits, the quantum analogue of conventional or classical logic circuits. Simulation of quantum circuits can therefore be used as a tool to evaluate issues in the design of quantum information processors. Unfortunately, simulating such phenomena efficiently is exceedingly difficult. The matrices representing quantum operators (gates) and vectors modeling quantum states grow exponentially with the number of quantum bits. The information represented by quantum states and operators often exhibits structure that can be exploited when simulating certain classes of quantum circuits. We study the development of simulation methods that run on classical computers and take advantage of such repetitions and redundancies. In particular, we define a new data structure for simulating quantum circuits called the quantum information decision diagram (QuIDD). A QuIDD is a compressed graph representation of a vector or matrix and permits computations to be performed directly on the compressed data. We develop a comprehensive set of algorithms for operating on QuIDDs in both the state-vector and density-matrix formats, and evaluate their complexity. These algorithms have been implemented in a general-purpose simulator program for quantum-mechanical applications called QuIDDPro. Through extensive experiments conducted on representative quantum simulation applications, including Grover's search algorithm, error characterization, and reversible circuits, we demonstrate that QuIDDPro is faster than other existing quantum-mechanical simulators such as the National Institute of Standards and Technology's QCSim program, and is far more memory-efficient. Using QuIDDPro, we explore the advantages of quantum computation over classical computation, simulate quantum errors and error correction, and study the impact of numerical precision on the fidelity of simulations. We also develop several novel algorithms for testing quantum circuit equivalence and compare them empirically. The QuIDDPro software is equipped with a user-friendly interface and is distributed with numerous example scripts. It has been used as a laboratory supplement for quantum computing courses at several universities.

•Jan 1, 2007•15 citations

GPU-Accelerated Quantum Simulation of Stabilizer Circuits

Muhammad Osama, Dimitrios Thanos, Alfons Laarman

We introduce new parallel algorithms for efficiently simulating stabilizer (Clifford) circuits on GPUs, with a focus on data-parallel tableau evolution and scalable handling of projective measurements. Our approach reformulates key bottlenecks in stabilizer simulation -- such as Gaussian elimination and measurement updates -- into GPU-tailored primitives that eliminate sequential dependencies and maximize memory coalescing. We implement these techniques in QuaSARQ, a GPU-accelerated stabilizer simulator designed for large qubit counts and many-shot sampling. Across a broad benchmark suite reaching 180,000 qubits and depth 1,000 (roughly 130M gates), QuaSARQ shows substantial runtime improvements, with up to 105$\times$ speedup, and over 80% energy reduction on demanding instances. Moreover, QuaSARQ consistently outperforms Stim, a state-of-the-art CPU-optimized stabilizer simulator, as well as Qiskit-Aer (CPU/GPU), Qibo, Cirq, and PennyLane. Finally, QuaSARQ exhibits a significant advantage in many-shot sampling on large workloads. These results demonstrate that our parallel algorithms can significantly advance the scalability of stabilizer-circuit simulation, particularly for workloads involving extensive measurements and sampling.

quant-pharXiv:2603.14641•Quantum•Mar 17, 2026•1 citation

Simulation of quantum circuits by low-rank stabilizer decompositions

Sergey B. Bravyi, Dan E. Browne, Padraic Calpin +3 more

Recent work has explored using the stabilizer formalism to classically simulate quantum circuits containing a few non-Clifford gates. The computational cost of such methods is directly related to the notion of s t a b i l i z e r rank , which for a pure state ψ is defined to be the smallest integer χ such that ψ is a superposition of χ stabilizer states. Here we develop a comprehensive mathematical theory of the stabilizer rank and the related approximate stabilizer rank. We also present a suite of classical simulation algorithms with broader applicability and significantly improved performance over the previous state-of-the-art. A new feature is the capability to simulate circuits composed of Clifford gates and arbitrary diagonal gates, extending the reach of a previous algorithm specialized to the Clifford+T gate set. We implemented the new simulation methods and used them to simulate quantum algorithms with 40-50 qubits and over 60 non-Clifford gates, without resorting to high-performance computers. We report a simulation of the Quantum Approximate Optimization Algorithm in which we process superpositions of χ ∼ 10 6 stabilizer states and sample from the full n -bit output distribution, improving on previous simulations which used ∼ 10 3 stabilizer states and sampled only from single-qubit marginals. We also simulated instances of the Hidden Shift algorithm with circuits including up to 64 T gates or 16 CCZ gates; these simulations showcase the performance gains available by optimizing the decomposition of a circuit's non-Clifford components.

arXiv:1808.00128•Quantum•Sep 2, 2019•435 citations
Generic quantum-circuit simulation appears intractable for conventional computers and may be unnecessary because useful quantum circuits exhibit significant structure that can be exploited during simulation. For example, Gottesman and Knill identified an important subclass, called stabilizer circuits, which can be simulated efficiently using group-theory techniques and insights from quantum physics. Realistic circuits enriched with quantum error-correcting codes and fault-tolerant procedures are dominated by stabilizer subcircuits and contain a relatively small number of non-Clifford components. Therefore, we develop new data structures and algorithms that facilitate parallel simulation of such circuits. Stabilizer frames offer more compact storage than previous approaches but require more sophisticated bookkeeping. Our implementation, called Quipu, simulates certain quantum arithmetic circuits (e.g., reversible ripple-carry adders) in polynomial time and space for equal superpositions of n-qubits. On such instances, known linear-algebraic simulation techniques, such as the (state-of-the-art) BDD-based simulator QuIDDPro, take exponential time. We simulate quantum Fourier transform and quantum fault-tolerant circuits using Quipu, and the results demonstrate that our stabilizer-based technique empirically outperforms QuIDDPro in all cases. While previous high-performance, structure-aware simulations of quantum circuits were difficult to parallellize, we demonstrate that Quipu can be parallelized with a nontrivial computational speedup.
As quantum information processing gains traction, its simulation becomes increasingly significant for engineering purposes - evaluation, testing and optimization - as well as for theoretical research. Generic quantum-circuit simulation appears intractable for conventional computers. However, Gottesman and Knill identified an important subclass, called stabilizer circuits, which can be simulated efficiently using group-theory techniques. Practical circuits enriched with quantum error-correcting codes and fault-tolerant procedures are dominated by stabilizer subcircuits and contain a relatively small number of non-stabilizer components. Therefore, we develop new group-theory data structures and algorithms to simulate such circuits. Stabilizer frames offer more compact storage than previous approaches but requires more sophisticated bookkeeping. Our implementation, called Quipu, simulates certain quantum arithmetic circuits (e.g., ripple-carry adders) in polynomial time and space for equal superpositions of n-qubits. On such instances, known linear-algebraic simulation techniques, such as the (state-of-the-art) BDD-based simulator QuIDDPro, take exponential time. We simulate various quantum Fourier transform and quantum fault-tolerant circuits with Quipu, and the results demonstrate that our stabilizer-based technique outperforms QuIDDPro in all cases.
Simulation of stabilizer circuits is a well-studied problem in quantum information processing, with a number of highly optimized algorithms available. Yet, we argue that further improvements can arise from the theoretical structure of stabilizer operations themselves. We focus on the subclass of stabilizer circuits composed of Calderbank-Shor-Steane (CSS)-preserving stabilizer operations, which naturally appear in fault-tolerant computations over CSS stabilizer codes. Using elementary circuit transformation techniques, we show that such circuits can be exactly rewritten as classical probabilistic circuits that reproduce measurement statistics. This rewriting introduces no computational overhead, in contrast to the general case of stabilizer circuits. To clarify the origin of this simplification, we introduce the standard quadratic form representation of general stabilizer operations (Clifford channels). It provides an efficient way to describe compositions of stabilizer operations and thus to simulate stabilizer circuits. CSS-preserving operations correspond to purely linear forms, which under a Walsh-Hadamard-Fourier transform yield a noncontextual hidden variable model, providing an alternative proof of the introduced rewriting. Finally, we develop a theory of reference frames for multiqubit systems, where frames are encoded by quadratic forms. This allows us to express stabilizer operations as probabilistic maps for proper reference frames. Non-CSS-preserving stabilizer circuits require dynamical modifications of reference frames, embodying a contextuality resource that leads to the computational overhead. This framework provides a new perspective on simulating stabilizer and near-stabilizer circuits within dynamically evolving quasiprobability models.
Simulation of quantum information processing remains a major challenge with important applications in quantum computer science and engineering. Generic quantum-circuit simulation appears intractable for conventional computers and may be unnecessary because useful quantum circuits exhibit significant structure that can be exploited during simulation. For example, Gottesman and Knill identified an important subclass, called stabilizer circuits, which can be simulated efficiently using the Heisenberg representation for quantum computers. Stabilizer circuits are exclusively composed of stabilizer gates -- Hadamard, Phase and CNOT -- followed by one-qubit measurements in the computational basis. Such circuits are applied to a computational-basis state and produce so-called stabilizer states. Aaronson and Gottesman generalized stabilizer-circuit simulation to additionally handle a small number of non-stabilizer gates. We design new, more efficient data structures and algorithms for such beyond-stabilizer simulation using superpositions of stabilizer states. One such data structure, a stabilizer frame, offers more compact storage than previous approaches but require additional algorithms to maintain the global phases of each state in the superposition. To explore the advantages and limitations of our technique, we analyze the geometric structure of stabilizer states and their embedding in Hilbert space. Our analysis includes results on the computational geometry of stabilizer states such as efficient algorithms for computing distances, angles and volumes between them. The main advantages of using stabilizer-state superpositions to simulate quantum circuits are: (i) stabilizer subcircuits are simulated with high efficiency, (ii) superpositions can be restructured and compressed on the fly during simulation to reduce resource requirements, and (iii) operations performed on such superpositions lend themselves to distributed or asynchronous processing. Our software implementation, called Quipu, simulates certain quantum arithmetic circuits (e.g., reversible ripple-carry adders) and quantum Fourier transform circuits in polynomial time and space for specific input states. On such instances, known linear-algebraic simulation techniques, such as the (state-of-the-art) BDD-based simulator QuIDDPro, take exponential time. We simulate quantum fault-tolerant circuits using Quipu, and the results indicate that our stabilizer-based technique empirically outperforms QuIDDPro in all cases. While previous structure-aware simulations of quantum circuits were difficult to parallellize, we demonstrate a parallel version of Quipu that achieves a nontrivial speedup.
Quantum-mechanical phenomena are playing an increasing role in information processing as transistor sizes approach the nanometer level, while the securest forms of communication rely on quantum data encoding. When they involve a finite number of basis states, these phenomena can be modeled as quantum circuits, the quantum analogue of conventional or classical logic circuits. Simulation of quantum circuits can therefore be used as a tool to evaluate issues in the design of quantum information processors. Unfortunately, simulating such phenomena efficiently is exceedingly difficult. The matrices representing quantum operators (gates) and vectors modeling quantum states grow exponentially with the number of quantum bits. The information represented by quantum states and operators often exhibits structure that can be exploited when simulating certain classes of quantum circuits. We study the development of simulation methods that run on classical computers and take advantage of such repetitions and redundancies. In particular, we define a new data structure for simulating quantum circuits called the quantum information decision diagram (QuIDD). A QuIDD is a compressed graph representation of a vector or matrix and permits computations to be performed directly on the compressed data. We develop a comprehensive set of algorithms for operating on QuIDDs in both the state-vector and density-matrix formats, and evaluate their complexity. These algorithms have been implemented in a general-purpose simulator program for quantum-mechanical applications called QuIDDPro. Through extensive experiments conducted on representative quantum simulation applications, including Grover's search algorithm, error characterization, and reversible circuits, we demonstrate that QuIDDPro is faster than other existing quantum-mechanical simulators such as the National Institute of Standards and Technology's QCSim program, and is far more memory-efficient. Using QuIDDPro, we explore the advantages of quantum computation over classical computation, simulate quantum errors and error correction, and study the impact of numerical precision on the fidelity of simulations. We also develop several novel algorithms for testing quantum circuit equivalence and compare them empirically. The QuIDDPro software is equipped with a user-friendly interface and is distributed with numerous example scripts. It has been used as a laboratory supplement for quantum computing courses at several universities.
We introduce new parallel algorithms for efficiently simulating stabilizer (Clifford) circuits on GPUs, with a focus on data-parallel tableau evolution and scalable handling of projective measurements. Our approach reformulates key bottlenecks in stabilizer simulation -- such as Gaussian elimination and measurement updates -- into GPU-tailored primitives that eliminate sequential dependencies and maximize memory coalescing. We implement these techniques in QuaSARQ, a GPU-accelerated stabilizer simulator designed for large qubit counts and many-shot sampling. Across a broad benchmark suite reaching 180,000 qubits and depth 1,000 (roughly 130M gates), QuaSARQ shows substantial runtime improvements, with up to 105×\times× speedup, and over 80% energy reduction on demanding instances. Moreover, QuaSARQ consistently outperforms Stim, a state-of-the-art CPU-optimized stabilizer simulator, as well as Qiskit-Aer (CPU/GPU), Qibo, Cirq, and PennyLane. Finally, QuaSARQ exhibits a significant advantage in many-shot sampling on large workloads. These results demonstrate that our parallel algorithms can significantly advance the scalability of stabilizer-circuit simulation, particularly for workloads involving extensive measurements and sampling.
Recent work has explored using the stabilizer formalism to classically simulate quantum circuits containing a few non-Clifford gates. The computational cost of such methods is directly related to the notion of s t a b i l i z e r rank , which for a pure state ψ is defined to be the smallest integer χ such that ψ is a superposition of χ stabilizer states. Here we develop a comprehensive mathematical theory of the stabilizer rank and the related approximate stabilizer rank. We also present a suite of classical simulation algorithms with broader applicability and significantly improved performance over the previous state-of-the-art. A new feature is the capability to simulate circuits composed of Clifford gates and arbitrary diagonal gates, extending the reach of a previous algorithm specialized to the Clifford+T gate set. We implemented the new simulation methods and used them to simulate quantum algorithms with 40-50 qubits and over 60 non-Clifford gates, without resorting to high-performance computers. We report a simulation of the Quantum Approximate Optimization Algorithm in which we process superpositions of χ ∼ 10 6 stabilizer states and sample from the full n -bit output distribution, improving on previous simulations which used ∼ 10 3 stabilizer states and sampled only from single-qubit marginals. We also simulated instances of the Hidden Shift algorithm with circuits including up to 64 T gates or 16 CCZ gates; these simulations showcase the performance gains available by optimizing the decomposition of a circuit's non-Clifford components.