Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1711.06172 · Physical Review A

Quantum metrology with a transmon qutrit

A. R. Shlyakhov, V. V. Zemlyanov, M. V. Suslov, A. V. Lebedev, Gheorghe Sorin Paraoanu, Gordey B. Lesovik, G. Blatter

Published Feb 27, 2018• 65 citations
arXivHTMLPDF

Abstract

Making use of coherence and entanglement as metrological quantum resources allows us to improve the measurement precision from the shot-noise or quantum limit to the Heisenberg limit. Quantum metrology then relies on the availability of quantum engineered systems that involve controllable quantum degrees of freedom which are sensitive to the measured quantity. Sensors operating in the qubit mode and exploiting their coherence in a phase-sensitive measurement have been shown to approach the Heisenberg scaling in precision. Here, we show that this result can be further improved by operating the quantum sensor in the qudit mode, i.e., by exploiting $d$ rather than two levels. Specifically, we describe the metrological algorithm for using a superconducting transmon device operating in a qutrit mode as a magnetometer. The algorithm is based on the base-3 semiquantum Fourier transformation and enhances the quantum theoretical performance of the sensor by a factor of 2. Even more, the practical gain of our qutrit implementation is found in a reduction of the number of iteration steps of the quantum Fourier transformation by the factor $ln(2)/ln(3)\ensuremath{\approx}0.63$ compared to the qubit mode. We show that a two-tone capacitively coupled radio-frequency signal is sufficient for implementation of the algorithm.

DOI
10.1103/physreva.97.022115

Related papers

Quantum metrology based on superconducting qubits

Anton Kolosvetov, Nikolay Gusarov, Vladimir Slepnev +4 more

Quantum metrology based on superconducting qubits offers unprecedented precision in measuring fundamental physical quantities, particularly magnetic fields. In this study, we develop a modified quantum phase estimation algorithm utilizing superconducting qubits, enhanced by optimized initial state preparation, significantly improving measurement sensitivity and reducing estimation times compared to conventional techniques. To ensure practical applicability and robustness, we incorporate advanced noise modeling, including intrinsic decoherence effects such as flux-induced noise and Purcell losses. Through detailed analytical modeling and numerical simulations, we systematically evaluate sensitivity and practical implementation constraints across various superconducting qubit architectures—transmon, fluxonium, conventional flux, and C-shunt flux qubits. Our approach quantifies the critical trade-offs between coherence, measurement dynamics, and sensitivity, identifying optimal operational regimes for high-performance quantum sensing. We introduce custom circuit simulation methods enabling the analysis and optimization of arbitrary superconducting quantum devices. Our findings provide a framework for advancing quantum-enhanced magnetometry and promise to facilitate next-generation quantum sensors for fundamental physics research, gravitational field measurements, and quantum-assisted searches for dark matter candidates.

npj Quantum Information•Jun 4, 2026•2 citations

Quantum-enhanced magnetometry by phase estimation algorithms with a single artificial atom

S. Danilin, A. V. Lebedev, Antti P. Vepsäläinen +3 more

Abstract Phase estimation algorithms are key protocols in quantum information processing. Besides applications in quantum computing, they can also be employed in metrology as they allow for fast extraction of information stored in the quantum state of a system. Here, we implement two suitably modified phase estimation procedures, the Kitaev and the semiclassical Fourier-transform algorithms, using an artificial atom realized with a superconducting transmon circuit. We demonstrate that both algorithms yield a flux sensitivity exceeding the classical shot-noise limit of the device, allowing one to approach the Heisenberg limit. Our experiment paves the way for the use of superconducting qubits as metrological devices which are potentially able to outperform the best existing flux sensors with a sensitivity enhanced by few orders of magnitude.

arXiv:1801.02230•npj Quantum Information•Jun 25, 2018•73 citations

Quantum Sensors and Metrology: Principles and Technological Developments

Celestine Usmonov

Quantum sensors and metrology harness quantum phenomena—such as superposition, entanglement, and squeezing—to achieve precision measurements beyond classical limits. This review presents an overview of the fundamental principles underlying quantum sensing, including quantum coherence, entanglement-assisted measurement, and quantum-enhanced interferometry. Various quantum sensor platforms are discussed, including atomic clocks, nitrogen-vacancy (NV) center magnetometers, superconducting quantum interference devices (SQUIDs), optomechanical sensors, and trapped-ion systems. We explore their operational mechanisms, performance metrics, and technological implementations. Comparative analyses highlight sensitivity, spatial resolution, bandwidth, and environmental robustness. Advances in materials, control techniques, and hybrid architectures are examined, and emerging applications in navigation, geophysics, medical imaging, and fundamental physics are reviewed. Finally, future prospects for scalable and robust quantum metrology are discussed.

Advance Physics Letter•Feb 26, 2022•0 citations

Quantum entanglement for magnetometry

Vladimir Slepnev, Azat R. Gubaydullin, V. M. Vinokur

Quantum metrology promises enhanced precision by harnessing entanglement and quantum algorithms. Yet, realizing such gains on current noisy quantum hardware remains a significant challenge. Here, we investigate quantum-enhanced magnetometry using phase estimation algorithms on superconducting quantum processors the IQM Garnet and Rigetti Ankaa-3. We experimentally compare the performance of different entangled, parallel and combined sensing strategies. While the entangled states should provide improvements in sensitivity in ideal conditions, we find that their advantage is less in practice on currently available systems. Instead, partitioning qubits into smaller entangled subsets and operating them in parallel achieves near-optimal sensitivity. We derive a general expression for magnetometric precision as a function of total qubit number and subset entanglement size, based on the attenuation of the system, identifying optimal configurations under realistic noise constraints.

EPJ Quantum Technology•May 18, 2026•1 citation

Optimized emulation of quantum magnetometry via superconducting qubits

Nikolay Gusarov, Michael Romanovich Perelshtein, Pertti Juhani Hakonen +1 more

Quantum magnetometry based on adaptive phase estimation allows for Heisenberg precision while avoiding creation and maintenance of complex entangled states. However, the absolute sensitivity is limited by the nonoptimal use of quantum resources provided by multiple-qubit devices and algorithmic realizations of the protocol. Here, addressing both issues, we advance the time-ascending phase estimation protocol by numerical improvements of Bayesian learning, i.e., sequential updating of the field distribution, and optimal exploitation of resources provided by unentangled qubits with limited coherence. Such algorithmic improvements are used to evaluate the absolute sensitivity both on a simulator and by pulsed-transmon experiments conducted on the IBMQ platform, where we take advantage of high coherence time. In addition, we compare the proficiency of separable and entangled states for magnetometry and show that, in practice, separable states provide superior performance. Flux-sensing emulation experiments demonstrate that a sensitivity of $(0.17--1.74)\ensuremath{\mu}{\mathrm{\ensuremath{\Phi}}}_{0}\phantom{\rule{4pt}{0ex}}{(\sqrt{\mathrm{Hz}})}^{\ensuremath{-}1}$ (where ${\mathrm{\ensuremath{\Phi}}}_{0}$ is the flux quantum) for a single-qubit magnetometer and $(0.06--0.65)\ensuremath{\mu}{\mathrm{\ensuremath{\Phi}}}_{0}\phantom{\rule{4pt}{0ex}}{(\sqrt{\mathrm{Hz}})}^{\ensuremath{-}1}$ for a five-qubit magnetometer can be achieved for slowly oscillating $1--10\phantom{\rule{4pt}{0ex}}\mathrm{kHz}$ magnetic fields, which is comparable to more established experimental platforms for magnetometry.

Physical Review A•May 19, 2023•10 citations

Linear Ascending Metrological Algorithm

M. R. Perelshtein, N. S. Kirsanov, V. V. Zemlyanov +4 more

The authors introduce a Linear Ascending Metrological Algorithm as a quantum protocol for high-precision magnetic field measurements using superconducting transmon devices as sensors operating in a qudit mode.

arXiv:2103.13143•Physical Review Research•Mar 19, 2021•9 citations
Making use of coherence and entanglement as metrological quantum resources allows us to improve the measurement precision from the shot-noise or quantum limit to the Heisenberg limit. Quantum metrology then relies on the availability of quantum engineered systems that involve controllable quantum degrees of freedom which are sensitive to the measured quantity. Sensors operating in the qubit mode and exploiting their coherence in a phase-sensitive measurement have been shown to approach the Heisenberg scaling in precision. Here, we show that this result can be further improved by operating the quantum sensor in the qudit mode, i.e., by exploiting ddd rather than two levels. Specifically, we describe the metrological algorithm for using a superconducting transmon device operating in a qutrit mode as a magnetometer. The algorithm is based on the base-3 semiquantum Fourier transformation and enhances the quantum theoretical performance of the sensor by a factor of 2. Even more, the practical gain of our qutrit implementation is found in a reduction of the number of iteration steps of the quantum Fourier transformation by the factor ln(2)/ln(3)\ensuremath≈0.63ln(2)/ln(3)\ensuremath{\approx}0.63ln(2)/ln(3)\ensuremath≈0.63 compared to the qubit mode. We show that a two-tone capacitively coupled radio-frequency signal is sufficient for implementation of the algorithm.
Quantum metrology based on superconducting qubits offers unprecedented precision in measuring fundamental physical quantities, particularly magnetic fields. In this study, we develop a modified quantum phase estimation algorithm utilizing superconducting qubits, enhanced by optimized initial state preparation, significantly improving measurement sensitivity and reducing estimation times compared to conventional techniques. To ensure practical applicability and robustness, we incorporate advanced noise modeling, including intrinsic decoherence effects such as flux-induced noise and Purcell losses. Through detailed analytical modeling and numerical simulations, we systematically evaluate sensitivity and practical implementation constraints across various superconducting qubit architectures—transmon, fluxonium, conventional flux, and C-shunt flux qubits. Our approach quantifies the critical trade-offs between coherence, measurement dynamics, and sensitivity, identifying optimal operational regimes for high-performance quantum sensing. We introduce custom circuit simulation methods enabling the analysis and optimization of arbitrary superconducting quantum devices. Our findings provide a framework for advancing quantum-enhanced magnetometry and promise to facilitate next-generation quantum sensors for fundamental physics research, gravitational field measurements, and quantum-assisted searches for dark matter candidates.
Abstract Phase estimation algorithms are key protocols in quantum information processing. Besides applications in quantum computing, they can also be employed in metrology as they allow for fast extraction of information stored in the quantum state of a system. Here, we implement two suitably modified phase estimation procedures, the Kitaev and the semiclassical Fourier-transform algorithms, using an artificial atom realized with a superconducting transmon circuit. We demonstrate that both algorithms yield a flux sensitivity exceeding the classical shot-noise limit of the device, allowing one to approach the Heisenberg limit. Our experiment paves the way for the use of superconducting qubits as metrological devices which are potentially able to outperform the best existing flux sensors with a sensitivity enhanced by few orders of magnitude.
Quantum sensors and metrology harness quantum phenomena—such as superposition, entanglement, and squeezing—to achieve precision measurements beyond classical limits. This review presents an overview of the fundamental principles underlying quantum sensing, including quantum coherence, entanglement-assisted measurement, and quantum-enhanced interferometry. Various quantum sensor platforms are discussed, including atomic clocks, nitrogen-vacancy (NV) center magnetometers, superconducting quantum interference devices (SQUIDs), optomechanical sensors, and trapped-ion systems. We explore their operational mechanisms, performance metrics, and technological implementations. Comparative analyses highlight sensitivity, spatial resolution, bandwidth, and environmental robustness. Advances in materials, control techniques, and hybrid architectures are examined, and emerging applications in navigation, geophysics, medical imaging, and fundamental physics are reviewed. Finally, future prospects for scalable and robust quantum metrology are discussed.
Quantum metrology promises enhanced precision by harnessing entanglement and quantum algorithms. Yet, realizing such gains on current noisy quantum hardware remains a significant challenge. Here, we investigate quantum-enhanced magnetometry using phase estimation algorithms on superconducting quantum processors the IQM Garnet and Rigetti Ankaa-3. We experimentally compare the performance of different entangled, parallel and combined sensing strategies. While the entangled states should provide improvements in sensitivity in ideal conditions, we find that their advantage is less in practice on currently available systems. Instead, partitioning qubits into smaller entangled subsets and operating them in parallel achieves near-optimal sensitivity. We derive a general expression for magnetometric precision as a function of total qubit number and subset entanglement size, based on the attenuation of the system, identifying optimal configurations under realistic noise constraints.
Quantum magnetometry based on adaptive phase estimation allows for Heisenberg precision while avoiding creation and maintenance of complex entangled states. However, the absolute sensitivity is limited by the nonoptimal use of quantum resources provided by multiple-qubit devices and algorithmic realizations of the protocol. Here, addressing both issues, we advance the time-ascending phase estimation protocol by numerical improvements of Bayesian learning, i.e., sequential updating of the field distribution, and optimal exploitation of resources provided by unentangled qubits with limited coherence. Such algorithmic improvements are used to evaluate the absolute sensitivity both on a simulator and by pulsed-transmon experiments conducted on the IBMQ platform, where we take advantage of high coherence time. In addition, we compare the proficiency of separable and entangled states for magnetometry and show that, in practice, separable states provide superior performance. Flux-sensing emulation experiments demonstrate that a sensitivity of $(0.17--1.74)\ensuremath{\mu}{\mathrm{\ensuremath{\Phi}}}_{0}\phantom{\rule{4pt}{0ex}}{(\sqrt{\mathrm{Hz}})}^{\ensuremath{-}1}$ (where ${\mathrm{\ensuremath{\Phi}}}_{0}$ is the flux quantum) for a single-qubit magnetometer and $(0.06--0.65)\ensuremath{\mu}{\mathrm{\ensuremath{\Phi}}}_{0}\phantom{\rule{4pt}{0ex}}{(\sqrt{\mathrm{Hz}})}^{\ensuremath{-}1}$ for a five-qubit magnetometer can be achieved for slowly oscillating 1−−10kHz1--10\phantom{\rule{4pt}{0ex}}\mathrm{kHz}1−−10kHz magnetic fields, which is comparable to more established experimental platforms for magnetometry.