We study the problem of decoding classical information encoded on quantum states at the output of a quantum channel, with particular focus on increasing the communication rates towards the maximum allowed by Quantum Mechanics. After a brief introduction to the main theoretical formalism employed in the rest of the thesis, i.e., continuous-variable Quantum Information Theory and Quantum Communication Theory, we consider several decoding schemes. First, we treat the problem from an abstract perspective, presenting a method to decompose any quantum measurement into a sequence of easier nested measurements through a binary-tree search. Furthermore we show that this decomposition can be used to build a capacity-achieving decoding protocol for classical communication on quantum channels and to solve the optimal discrimination of some sets of quantum states. These results clarify the structure of optimal quantum measurements, showing that it can be recast in a more operational and experimentally-oriented fashion. Second, we consider a more practical approach and describe three receiver structures for coherent states of the electromagnetic field with applications to single-mode state discrimination and multi-mode decoding at the output of a quantum channel. We treat the problem bearing in mind the technological limitations faced nowadays in the field of optical communications: we evaluate the performance of general decoding schemes based on such technology and report increased performance of two schemes, the first one employing a non-Gaussian transformation and the second one employing a code tailored to be read out easily by the most common detectors. Eventually we characterize a large class of multi-mode adaptive receivers based on common technological resources, obtaining a no-go theorem for their capacity.
We study the problem of decoding classical information encoded on quantum states at the output of a quantum channel, with particular focus on increasing the communication rates towards the maximum allowed by Quantum Mechanics. After a brief introduction to the main theoretical formalism employed in the rest of the thesis, i.e., continuous-variable Quantum Information Theory and Quantum Communication Theory, we consider several decoding schemes. First, we treat the problem from an abstract perspective, presenting a method to decompose any quantum measurement into a sequence of easier nested measurements through a binary-tree search. Furthermore we show that this decomposition can be used to build a capacity-achieving decoding protocol for classical communication on quantum channels and to solve the optimal discrimination of some sets of quantum states. These results clarify the structure of optimal quantum measurements, showing that it can be recast in a more operational and experimentally-oriented fashion. Second, we consider a more practical approach and describe three receiver structures for coherent states of the electromagnetic field with applications to single-mode state discrimination and multi-mode decoding at the output of a quantum channel. We treat the problem bearing in mind the technological limitations faced nowadays in the field of optical communications: we evaluate the performance of general decoding schemes based on such technology and report increased performance of two schemes, the first one employing a non-Gaussian transformation and the second one employing a code tailored to be read out easily by the most common detectors. Eventually we characterize a large class of multi-mode adaptive receivers based on common technological resources, obtaining a no-go theorem for their capacity.
Born about a century ago, Quantum Mechanics has revolutionized the description and the interpretation of Physics at sub-microscopic level. In the last decades, due to the influence of mathematical and engineering research fields, Quantum Mechanics has given birth to related research areas like Quantum Computation, Quantum Information and Quantum Communication. With the discovery of the laser, and later the development of fiber optics and satellite networks, Quantum Communication and Quantum Optics seems to have a natural field of application in Communication Systems. Despite this, the interest in this technology and studies for communication purpose has been overshadowed by the great results in communication networks achieved in the last decades with classical paradigms. However, due to the increasing demand of communication data rate, system designers are now looking at Quantum Mechanics for new and more performanting solutions in communication purposes. Early theoretical studies on Quantum Discrimination Theory and Quantum Information predict better performance for Communication Systems that take advantage of the quantum laws. In addition, Quantum Mechanics provides the deepest description of the physical phenomena, and there are scenarios where a quantum model fits best, as in in deep space communications, where the received signal is really weak, or in a satellite networks, where we are interested in strongly reducing the power of transmitted signals, possibly without sacrificing performance significantly. However, if on one side Quantum Communication Theory promises great gains in the performance of communication systems, on the other hand it fails to describe how to implement physical devices that reach these ultimate limits. So far, only a few architectures achieving these performances are known, and only for simple modulation formats. We are interested in the scenario of optical communications, where the message transmitted is encoded in a sequence of coherent states. Transmitter devices for coherent modulation are well known and consist in laser pulse generators. Instead, receiver implementations working at the quantum limit performance limit are yet to be found. In this Thesis I deal with different topics in the quantum transmission scenario. First, I review existing classical (suboptimal) and quantum (suboptimal and optimal) receiver schemes for the binary coherent modulation. I present a new formulation of the optimal scheme known as Dolinar Receiver with the multiple copies problem, focusing on the information gained during the measurement. Second, I analyze the binary communication in a noisy environment, studying the error probability and the capacity of the binary channel induced. Given the description of the quantum channel, I optimize both the transmitted quantum states and the measurement operators employed in the communication. Third, I consider the Pulse Position Modulation, that is particularly suitable for space and satellite communication due to its simplicity of implementation and high capacity. I review some known suboptimal receivers, and I propose a receiver scheme which approaches the limit performance predicted with quantum theory outperforming the existing schemes. To sum up the results of this Thesis, in order to approach the limit performance predicted by Quantum Mechanics, an optimization is always necessary to exceed the classical effects and trigger the quantum phenomena. In particular, the information gained during the measurement plays an important role, for example in the definition of adaptive receivers. In this Thesis both these aspects have been deeply investigated.
Nowadays, quantum communications provide a vast field of research in rapid expansion, with a huge potential impact on the future developments of quantum technologies. In particular, continuous variable systems, employing coherent-state encoding and quadrature measurements, represent a suitable platform, due to their compatibility with both the modulation and detection systems currently employed in standard fiber-optical communications. In this work, we address some relevant aspects of the field, and provide innovative results being also experimentally oriented. In particular, we focus on two relevant paradigms: quantum decision theory and continuous variable quantum key distribution (CVQKD). In the former case, we address the problem of coherent-state discrimination and design new hybrid receivers for binary phase-shift keying discrimination, obtaining a quantum advantage over conventional detection schemes, being also robust against typical experimental imperfections. In the latter scenario, we proceed in two different directions. On the one hand, we design new CVQKD protocols employing discrete modulation of coherent states, being a feasible solution compatible with the state of the art in optical communications technologies. On the other hand, we address the more fundamental problem of performing channel losses mitigation to enhance existing protocols, and investigate the role of optical amplifiers for the task. Finally, we make a first step towards a fully non-Gaussian CVQKD scheme by proposing, for the first time, the adoption of an optimized state-discrimination receiver, commonly adopted for quantum decision theory, within the context of CVQKD, obtaining a genuine quantum enhancement over conventional protocols.
Motivated by the increasing demand for more powerful and efficient optical communication systems, quantum mechanics of information processing has become the key element in determining the fundamental limits of physical channels, and in designing quantum communication systems that approach those fundamental limits. To achieve higher data rates over quantum optical channels, we need to efficiently extract classical information from quantum states. However, peculiar properties of quantum states, such as the no-cloning theorem and the non-reversible measurement process, provide new challenges in the measurement of quantum states; in quantum information science, there is no concept analogous to sufficient statistics in classical information science. Therefore, to extract as much information as possible from quantum states, it is important to choose the right measurement process. In this thesis, we investigate the fundamental question of how to design the measurement process to efficiently extract information from quantum states. First, we consider adaptive measurement, with which we measure each received quantum state one at a time, and then update the next measurement process based on the previous observations. We show that for binary hypothesis testing between two ideal laser light pulses, if we update the adaptive measurement to maximize the communication efficiency at each instant, based on recursively updated knowledge of the receiver, then we can achieve the theoretical lower bound of the detection error probability. Using this viewpoint, we give a natural generalization of the adaptive measurement to general Mary hypothesis testing problems. We also analyze the information capacity with adaptive measurement, and compare the result with that for direct detection receivers and the ultimate capacity of quantum channels (the Holevo limit). We also investigate finite-blocklength joint receivers. The ultimate capacity of quantum channels is calculated under the assumption that an infinite number of quantum states can be collectively measured in one shot. However, this assumption becomes the primary barrier that prevents practical implementations of capacity-achieving joint detection receivers. The maximum number of classical information bits extracted per use of the quantum channel strictly increases with the number of channel outputs jointly measured at the receiver. This phenomenon is called strict superadditivity, and it has been thought of as a unique property that can be observed only in quantum channels, but not in classical discrete memoryless channels (DMCs). In this thesis, we introduce a new aspect of understanding strict superadditivity by comparing the performance of concatenated coding over quantum channels and classical DMCs, for a fixed inner code length. We show that the strict superadditivity in information rate occurs due to a loss of information from hard-decisions at the finite blocklength. We also find a lower bound on the maximum achievable information rate as a function of the length of the quantum measurement. The analysis and new insights into the measurement process of quantum states that we develop in this thesis can be used to improve not only current quantum optical communication systems, but also classical information processing, where the data is too big to be handled with sufficient statistics. Our work would help develop new concepts of efficient statistics that provide systematic ways to choose useful information among big data while discarding the rest.
Discriminating between quantum states is an indispensable part of quantum information theory. This thesis investigates state discrimination of continuous quantum variables, focusing on bosonic communication channels and Gaussian states. The specific state discrimination problems studied are (a) quantum illumination and (b) optimal measurements for decoding bosonic channels. Quantum illumination is a technique for detection and imaging which uses entanglement between a probe and an ancilla to enhance sensitivity. I shall show how entanglement can help with the discrimination between two noisy and lossy bosonic channels, one in which a target reflects back a small part of the probe light, and the other in which all probe light is lost. This enhancement is obtained even though the channels are entanglement-breaking. The main result of this study is that, under optimum detection in the asymptotic limit of many detection trials, 6 dB of improvement in the error exponent can be achieved by using an entangled state as compared to a classical state. In the study of optimal measurements for decoding bosonic channels, I shall present an alternative measurement to the pretty-good measurement for attaining the classical capacity of the lossy bosonic channel given product coherent-state inputs. This new measurement has the feature that, at each step of the measurement, only projective measurements are needed. The measurement is a sequential one: the number of steps required is exponential in the code length, and the error rate of this measurement goes to zero in the limit of large code length. Although not physically practical in itself, this new measurement has a simple physical interpretation in terms of collective energy measurements, and may give rise to an implementation of an optimal measurement for lossy bosonic channels. The two problems studied in my thesis are examples of how state discrimination can be useful in solving problems by using quantum mechanical properties such as entanglement and entangling measurements.
In this thesis we study the information transmission through Gaussian quantum channels. Gaussian quantum channels model physical communication links, such as free space communication or optical fibers and therefore, may be considered as the most relevant quantum channels. One of the central characteristics of any communication channel is its capacity. In this work we are interested in the classical capacity, which is the maximal number of bits that can be reliably transmitted per channel use. An important lower bound on the classical capacity is given by the Gaussian capacity, which is the maximal transmission rate with the restriction that only Gaussian encodings are allowed: input messages are encoded in so-called Gaussian states for which the mean field amplitudes are Gaussian distributed. We focus in this work mainly on the Gaussian capacity for the following reasons. First, Gaussian encodings are easily accessible experimentally. Second, the difficulty of studying the classical capacity, which arises due to an optimization problem in an infinite dimensional Hilbert space, is greatly reduced when considering only Gaussian input encodings. Third, the Gaussian capacity is conjectured to coincide with the classical capacity, even though this longstanding conjecture is unsolved until today. We start with the investigation of the capacities of the single-mode Gaussian channel. We show that the most general case can be reduced to a simple, fiducial Gaussian channel which depends only on three parameters: its transmissivity (or gain), the added noise variance and the squeezing of the noise. Above a certain input energy threshold, the optimal input variances are given by a quantum water-filling solution, which implies that the optimal modulated output state is a thermal state. This is a quantum extension (or generalization) of the well-known classical water-filling solution for parallel Gaussian channels. Below the energy threshold the solution is given by a transcendental equation and only the less noisy quadrature is modulated. We characterize in detail the dependence of the Gaussian capacity on its channel parameters. In particular, we show that the Gaussian capacity is a non-monotonous function of the noise squeezing and analytically specify the regions where it exhibits one maximum, a maximum and a minimum, a saddle point or no extrema. Then, we investigate the case of n-mode channels with noise correlations (i.e. memory), where we focus in particular on the classical additive noise channel. We consider memory models for which the noise correlations can be unraveled by a passive symplectic transformation. Therefore, we can simplify the problem to the study of the Gaussian capacity in an uncorrelated basis, which corresponds to the Gaussian capacity of n single-mode channels with a common input energy constraint. Above an input energy threshold the solutions is given by a global quantum water-filling solution, which implies that all modulated single-mode output states are thermal states with the same temperature. Below the threshold the channels are divided into three sets: i) those that are excluded from information transmission, ii) those for which only the less noisy quadrature is modulated, and iii) those for which the quantum water-filling solution is satisfied. As an example we consider a Gauss-Markov correlated noise, which in the uncorrelated basis corresponds to a collection of single-mode classical additive noise channels. When rotating the collection of optimal single-mode input states back to the original, correlated basis the optimal multi-mode input state becomes a highly entangled state. We then compare the performance of the optimal input state with a simple coherent state encoding and conclude that one gains up to 10% by using the optimal encoding. Since the preparation of the optimal input state may be very challenging we consider sub-optimal Gaussian-matrix product states (GMPS) as input states as well. GMPS have a known experimental setup and, though being heavily entangled, can be generated sequentially. We demonstrate that for the Markovian correlated noise as well as for a non-Markovian noise model in a wide range of channel parameters, a nearest-neighbor correlated GMPS achieves more than 99.9% of the Gaussian capacity. At last, we introduce a new noise model for which the GMPS is the exact optimal input state. Since GMPS are known to be ground states of quadratic Hamiltonians this suggests a starting point to develop links between optimization problems of quantum communication and many body physics.
A class of adaptive decoders (ADs) for coherent-state sequences is studied, including in particular the most common technology for optical-signal processing, e.g., interferometers, coherent displacements, and photon-counting detectors. More generally we consider ADs comprising adaptive procedures based on passive multimode Gaussian unitaries and arbitrary single-mode destructive measurements. For classical communication on quantum phase-insensitive Gaussian channels with a coherent-state encoding, we show that the AD's optimal information transmission rate is not greater than that of a single-mode decoder. Our result also implies that the ultimate classical capacity of quantum phase-insensitive Gaussian channels is unlikely to be achieved with the considered class of ADs.