Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1710.04209 · Physical review. D/Physical review. D.

Coherent detection of ultraweak electromagnetic fields

Zachary R. Bush, Simon Barke, Harold Hollis, Aaron Spector, Ayman Hallal, G. Messineo, David B. Tanner, Guido Mueller

Published Jan 2, 2019• 21 citations
arXivHTMLPDF

Abstract

We explore the application of heterodyne interferometry for a weak-field coherent detection scheme. The methods detailed here will be used in ALPS II, an experiment designed to search for weakly interacting, sub-eV particles. For ALPS II to reach its design sensitivity this detection system must be capable of accurately measuring fields with equivalent amplitudes on the order of ${10}^{\ensuremath{-}5}\text{ }\text{ }\mathrm{photons}/\mathrm{s}$ or greater. We present initial results of an equivalent dark count rate on the order of ${10}^{\ensuremath{-}5}\text{ }\text{ }\mathrm{photons}/\mathrm{s}$ as well as successful generation and detection of a signal with a field strength equivalent to ${10}^{\ensuremath{-}2}\text{ }\text{ }\mathrm{photons}/\mathrm{s}$.

DOI
10.1103/physrevd.99.022001

Related papers

Disproving the Existence of Photons

André Malz

This article presents a comprehensive study that furnishes compelling evidence bolstering the notion of electromagnetic field continuity, accomplished through the implementation of a self-heterodyne measurement technique.The primary objective was to investigate the detection method of FMCW for extremely weak signals, reaching energy levels akin to photons.Through thorough examination, significant contradictions emerged, favoring classical field theory and challenging the notion of electromagnetic field quantization.To strengthen this claim, a carefully designed experiment was conducted to measure sub-photon energy levels.The comprehensive analysis of both theoretical insights and experimental data presents compelling evidence, demonstrating the untenability of a quantized model for the electromagnetic field.These findings have profound implications for understanding the continuity of the electromagnetic field, prompting further exploration in this field of research.

•Dec 1, 2023•1 citation

Sub-Shot-Noise-Limited Optical Heterodyne Detection Using an Amplitude-Squeezed Local Oscillator

Yongqing Li, Dorel Guzun, Min Xiao

We experimentally demonstrate a novel sub-shot-noise-limited heterodyne detection scheme to measure a weak optical signal field by employing amplitude-squeezed light as the local oscillator (LO) field. The amplitude-squeezed LO field at 428.8 nm is generated from a high efficiency single-pass second-harmonic generation in a ${\mathrm{KNbO}}_{3}$ crystal pumped by femtosecond (130 fs) pulses at 857.6 nm, and the signal field is combined with the generated squeezed LO field through the crystal. An enhancement of 0.7 dB (1.4 dB inferred) in signal-to-noise ratio beyond the shot-noise limit is directly observed.

Physical Review Letters•Jun 28, 1999•50 citations

Experimental Study of Quantum Noise in Optical Heterodyne Detection

Dechao He, Boya Xie, Yu Xiao +1 more

We experimentally investigate the quantum-noise performance of a conventional heterodyne detector and find significant discrepancy between experiment and theory. Further investigations are highly recommended for deeper insight into the physics related to the quantum noise in optical heterodyne detection.

arXiv:1310.5432•Oct 21, 2013•0 citations

A superconducting microcalorimeter for low-flux detection of near-infrared single photons

Jan Dreyling-Eschweiler

This thesis covers the development and the characterization of a single photon detector based on a superconducting microcalorimeter. The detector development is motivated by the Any Light Particle Search II (ALPS II) experiment at DESY in Hamburg, which searches for weakly interacting sub-eV particles (WISPs). Therefore, a detection of low-fluxes of 1064 nm light is required. The work is divided in three analyses: the characterization of a milli-kelvin (mK) cryostat, the characterization of superconducting sensors for single photon detection, and the determination of dark count rates concerning 1064 nm signals.Firstly, an adiabatic demagnetization refrigerator (ADR) is characterized, which allows to reach mK-temperatures. During commissioning, the ADR cryostat is optimized and prepared to stably cool superconducting sensors at 80 mK ± 25 μK. It is found that sensors can be continuously operated for ∼20 h before recharging the system in <2 h. Furthermore, the adiabatic system reaches a chance of success of ∼80 % for a recharge without technical problems.Secondly, superconducting sensors are analyzed. The focus is on microcalorimetric transition-edge sensors (TESs) based on 20 nm Tungsten (W) films fabricated by the U.S. National Institute of Standards and Technology (NIST). NIST TESs have a near unity detection efficiency for 1064 nm light (literature value). The energy resolution for 1064 nm signals is measured to be <8 %. The exponential falling time of a photon pulse is 1.5 μs. Furthermore, by determining TES parameters, it is found that the linear TES theory describes measured photon pulses well. The TES response is read out by a superconducting quantum interference device (SQUID) fabricated by Physikalisch-Technische Bundesanstalt (PTB). The system bandwidth is measured to be 0.9 MHz. Finally, the operation in the ADR cryostat as well as the ALPS II laboratory is optimized. This setup forms the ALPS TES detector.Thirdly, the background is measured to obtain a dark count rate for 1064 nm signals. The ALPS TES detector is calibrated by a 1064 nm single photon source and methods are developed to analyze signals. In long-term measurements, background events are measured by using different optical setups. By operating the TES without an optical link outside mK-environment, intrinsic background components are observed and classified. This results in an intrinsic dark count rate for 1064 nm signals of 1.0 · 10^-4 s^-1 . By operating a fiber-coupled TES, it is found that the dark count rate for 1064 nm signals is dominated by pile-up events of near-infrared thermal photons coming through the fiber from the warm environment. Considering a detection efficiency of ∼18 %, a dark count rate of 8.6 · 10^-3 s^-1 is determined for 1064 nm ALPS photons.Concerning ALPS II, this results in a sensitivity gain compared to the ALPS I detector. Furthermore, this thesis is the starting point of TES detector development in Hamburg, Germany.

•Jan 1, 2014•6 citations

Quantum parity detectors: A qubit-based particle-detection scheme with meV thresholds for rare-event searches

Karthik Ramanathan, Brandon J. Sandoval, J. E. Parker +5 more

The next generation of rare-event searches, such as those aimed at determining the nature of particle dark matter or measuring fundamental neutrino properties, will benefit from particle detectors with thresholds at the meV scale, 100 – 1000 × lower than currently available. Quantum parity detectors (QPDs) are a class of proposed quantum devices, extending recent work on superconducting qubit sensors, that exploit the fingerprints of single quasiparticle tunneling across a coherent weak link as their detection concept. As envisioned, phonons generated by particle interactions within a crystalline substrate cause an eventual quasiparticle cascade within a surface-patterned superconducting qubit element. This process alters the fundamental charge parity of the device in a binary manner, which can be used to deduce the initial properties of the energy deposition. This work lays out multiple resonator-coupled readout schemes depending on qubit architecture, provides an analytic formulation for reconstructing sensor energies, and details strategies for multiplexing large arrays of sensors. We further compute the sensitivity of QPDs and detail an R&D pathway to demonstrating sub-eV energy deposit thresholds.

arXiv:2405.17192•APS Open Science•Apr 30, 2026•21 citations

Comments on Optical Heterodyne Detection

S. Karp

An investigation of the response of a quantum detector to a prescribed incident electromagnetic field is presented. For the fields used, a statistical description of the resulting current flow is given. First and second moments of the resulting densities are calculated, and signal-to-noise ratios are computed.

IEEE Transactions on Communication Technology•Oct 1, 1969•0 citations
We explore the application of heterodyne interferometry for a weak-field coherent detection scheme. The methods detailed here will be used in ALPS II, an experiment designed to search for weakly interacting, sub-eV particles. For ALPS II to reach its design sensitivity this detection system must be capable of accurately measuring fields with equivalent amplitudes on the order of 10\ensuremath−5  photons/s{10}^{\ensuremath{-}5}\text{ }\text{ }\mathrm{photons}/\mathrm{s}10\ensuremath−5  photons/s or greater. We present initial results of an equivalent dark count rate on the order of 10\ensuremath−5  photons/s{10}^{\ensuremath{-}5}\text{ }\text{ }\mathrm{photons}/\mathrm{s}10\ensuremath−5  photons/s as well as successful generation and detection of a signal with a field strength equivalent to 10\ensuremath−2  photons/s{10}^{\ensuremath{-}2}\text{ }\text{ }\mathrm{photons}/\mathrm{s}10\ensuremath−2  photons/s.
This article presents a comprehensive study that furnishes compelling evidence bolstering the notion of electromagnetic field continuity, accomplished through the implementation of a self-heterodyne measurement technique.The primary objective was to investigate the detection method of FMCW for extremely weak signals, reaching energy levels akin to photons.Through thorough examination, significant contradictions emerged, favoring classical field theory and challenging the notion of electromagnetic field quantization.To strengthen this claim, a carefully designed experiment was conducted to measure sub-photon energy levels.The comprehensive analysis of both theoretical insights and experimental data presents compelling evidence, demonstrating the untenability of a quantized model for the electromagnetic field.These findings have profound implications for understanding the continuity of the electromagnetic field, prompting further exploration in this field of research.
We experimentally demonstrate a novel sub-shot-noise-limited heterodyne detection scheme to measure a weak optical signal field by employing amplitude-squeezed light as the local oscillator (LO) field. The amplitude-squeezed LO field at 428.8 nm is generated from a high efficiency single-pass second-harmonic generation in a KNbO3{\mathrm{KNbO}}_{3}KNbO3​ crystal pumped by femtosecond (130 fs) pulses at 857.6 nm, and the signal field is combined with the generated squeezed LO field through the crystal. An enhancement of 0.7 dB (1.4 dB inferred) in signal-to-noise ratio beyond the shot-noise limit is directly observed.
This thesis covers the development and the characterization of a single photon detector based on a superconducting microcalorimeter. The detector development is motivated by the Any Light Particle Search II (ALPS II) experiment at DESY in Hamburg, which searches for weakly interacting sub-eV particles (WISPs). Therefore, a detection of low-fluxes of 1064 nm light is required. The work is divided in three analyses: the characterization of a milli-kelvin (mK) cryostat, the characterization of superconducting sensors for single photon detection, and the determination of dark count rates concerning 1064 nm signals.Firstly, an adiabatic demagnetization refrigerator (ADR) is characterized, which allows to reach mK-temperatures. During commissioning, the ADR cryostat is optimized and prepared to stably cool superconducting sensors at 80 mK ± 25 μK. It is found that sensors can be continuously operated for ∼20 h before recharging the system in <2 h. Furthermore, the adiabatic system reaches a chance of success of ∼80 % for a recharge without technical problems.Secondly, superconducting sensors are analyzed. The focus is on microcalorimetric transition-edge sensors (TESs) based on 20 nm Tungsten (W) films fabricated by the U.S. National Institute of Standards and Technology (NIST). NIST TESs have a near unity detection efficiency for 1064 nm light (literature value). The energy resolution for 1064 nm signals is measured to be <8 %. The exponential falling time of a photon pulse is 1.5 μs. Furthermore, by determining TES parameters, it is found that the linear TES theory describes measured photon pulses well. The TES response is read out by a superconducting quantum interference device (SQUID) fabricated by Physikalisch-Technische Bundesanstalt (PTB). The system bandwidth is measured to be 0.9 MHz. Finally, the operation in the ADR cryostat as well as the ALPS II laboratory is optimized. This setup forms the ALPS TES detector.Thirdly, the background is measured to obtain a dark count rate for 1064 nm signals. The ALPS TES detector is calibrated by a 1064 nm single photon source and methods are developed to analyze signals. In long-term measurements, background events are measured by using different optical setups. By operating the TES without an optical link outside mK-environment, intrinsic background components are observed and classified. This results in an intrinsic dark count rate for 1064 nm signals of 1.0 · 10^-4 s^-1 . By operating a fiber-coupled TES, it is found that the dark count rate for 1064 nm signals is dominated by pile-up events of near-infrared thermal photons coming through the fiber from the warm environment. Considering a detection efficiency of ∼18 %, a dark count rate of 8.6 · 10^-3 s^-1 is determined for 1064 nm ALPS photons.Concerning ALPS II, this results in a sensitivity gain compared to the ALPS I detector. Furthermore, this thesis is the starting point of TES detector development in Hamburg, Germany.
The next generation of rare-event searches, such as those aimed at determining the nature of particle dark matter or measuring fundamental neutrino properties, will benefit from particle detectors with thresholds at the meV scale, 100 – 1000 × lower than currently available. Quantum parity detectors (QPDs) are a class of proposed quantum devices, extending recent work on superconducting qubit sensors, that exploit the fingerprints of single quasiparticle tunneling across a coherent weak link as their detection concept. As envisioned, phonons generated by particle interactions within a crystalline substrate cause an eventual quasiparticle cascade within a surface-patterned superconducting qubit element. This process alters the fundamental charge parity of the device in a binary manner, which can be used to deduce the initial properties of the energy deposition. This work lays out multiple resonator-coupled readout schemes depending on qubit architecture, provides an analytic formulation for reconstructing sensor energies, and details strategies for multiplexing large arrays of sensors. We further compute the sensitivity of QPDs and detail an R&D pathway to demonstrating sub-eV energy deposit thresholds.