Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1709.09720 · Scientific Reports

Hybrid rf SQUID qubit based on high kinetic inductance

Joonas T. Peltonen, P. C. J. J. Coumou, Zhihui Peng, T. M. Klapwijk, Jaw-Shen Tsai, O. V. Astafiev

Published Jun 27, 2018• 47 citations
arXivHTMLPDF

Abstract

We report development and microwave characterization of rf SQUID (Superconducting QUantum Interference Device) qubits, consisting of an aluminium-based Josephson junction embedded in a superconducting loop patterned from a thin film of TiN with high kinetic inductance. Here we demonstrate that the systems can offer small physical size, high anharmonicity, and small scatter of device parameters. The work constitutes a non-tunable prototype realization of an rf SQUID qubit built on the kinetic inductance of a superconducting nanowire, proposed in Phys. Rev. Lett. 104, 027002 (2010). The hybrid devices can be utilized as tools to shed further light onto the origin of film dissipation and decoherence in phase-slip nanowire qubits, patterned entirely from disordered superconducting films.

DOI
10.1038/s41598-018-27154-1

Related papers

Studies of Quantum Transitions of Magnetic Flux in a RF Squid Qubit

Luigi Longobardi

At low temperature and low damping, the magnetic flux of a rf Superconducting QUantum Interference Device (SQUID) acts as a macroscopic quantum variable whose dynamic is described by a double well potential. A rf SQUID consists of a superconducting loop interrupted by a thin insulating barrier, known as a Josephson junction. The modified rf SQUID design discussed in this thesis has independent, in situ, controls that allow varying the barrier height between the potential wells and their relative tilt. This high level of control of the potential together with the capability to implement an experimental setup optimized to reduce coupling to external sources of noise, made this system ideal not only for tests of quantum transition at a macroscopic level, but also as a scalable solid state device for quantum computation. A variety of measurements of quantum phenomena are reported in this thesis, including microwave level spectroscopy, coherent oscillations, and macroscopic resonant tunneling (MRT). These measurements are compared with theoretical models to study the possible sources of decoherence in a rf SQUID qubit. The analysis confirmed that the main source of decoherence is not due to coupling to the external environment, but it can be linked to intrinsic low frequency flux noise. Work from many groups over the last several years has shown that the performance of a superconductive qubit is limited by coupling to spurious defects in the materials used for the device fabrication. In this work we analyze the possibility of using the MRT as a tool for future studies of effects of materials and fabrication process in the realization of improved qubits, and we also explore the feasibility for measurements of quantum phenomena that involve fast pulsing of the potential barrier height.

•Oct 22, 2010•0 citations

Realization and Modeling of Metamaterials Made of rf Superconducting Quantum-Interference Devices

M. Trepanier, Daimeng Zhang, Oleg A. Mukhanov +1 more

A radio receiver that can tune to and digitize millions of frequencies per second, even if the signals are very weak, requires isolating the desired signal from stronger, unwanted noise. Scientists demonstrate a new kind of metamaterial, built with individual radio-frequency superconducting quantum-interference devices (rf SQUIDs), that allows such fast and long-range tuning by exploiting the large tunability of the nonlinear effective inductance of the Josephson junction in each SQUID.

arXiv:1308.1410•Physical Review X•Dec 18, 2013•64 citations

High Kinetic Inductance Nb N Nanowire Superinductors

David Niepce, Jonathan Burnett, Jonas Bylander

Quantum decoherence due to charge fluctuations is still a problem in many device architectures for quantum computing or metrology, but it can be suppressed by shunting the circuit with a high microwave impedance, known as a $s\phantom{\rule{0}{0ex}}u\phantom{\rule{0}{0ex}}p\phantom{\rule{0}{0ex}}e\phantom{\rule{0}{0ex}}r\phantom{\rule{0}{0ex}}i\phantom{\rule{0}{0ex}}n\phantom{\rule{0}{0ex}}d\phantom{\rule{0}{0ex}}u\phantom{\rule{0}{0ex}}c\phantom{\rule{0}{0ex}}t\phantom{\rule{0}{0ex}}a\phantom{\rule{0}{0ex}}n\phantom{\rule{0}{0ex}}c\phantom{\rule{0}{0ex}}e$. This study uses the kinetic inductance of a nanowire of disordered superconductor to demonstrate a low-loss, small-capacitance superinductor, in a simpler approach than the traditionally used Josephson-junction arrays. Such nanowire superinductors should have an impact on engineering long-lived superconducting qubits, and quantum-coherent experiments with mesoscopic systems.

arXiv:1802.01723•Physical Review Applied•Apr 4, 2019•159 citations

Superconducting devices based on the coherent quantum phase slips

Ilya Antonov, Rais S. Shaikhaidarov, Evgeni V. Il’ichev +2 more

The experimental demonstration of the coherent quantum phase slip (CQPS) in superconductors has opened a new direction of fundamental research and application of quantum cryogenic electronics. The flux qubit with CQPS center, new phase-locking mechanism, and suppression of the flux tunneling, the Charge Quantum Interference Device, dual Shapiro steps, and Bloch transistor were demonstrated. In part, progress is due to the emergence of new superconducting materials with high kinetic inductance, NbN, InOx, TiN, and AlOx; mature nanotechnology of the fabrication of nanowires and nanoscale Josephson junctions of nm sizes; and efficient protection of them from environmental noise. We review recent progress with CQPS and discuss further development of superconducting materials with high kinetic inductance and the emergence of devices with new functionalities.

Applied Physics Reviews•Nov 11, 2026•0 citations

Parasitic RF-SQUIDs in superconducting qubits due to wirebonds

Benedikt Berlitz, Etienne Daum, Steffen Deck +2 more

Abstract Superconducting qubits show great promise to realize practical quantum computers from micro-fabricated integrated circuits. However, their solid-state architecture bears the burden of parasitic modes in qubit materials and the control circuitry which cause decoherence and interfere with qubits. Here, we present evidence that wirebonds, which are used to contact the micro-circuits and to realize chip-to-chip airbridges, may contain parasitic Josephson junctions. In our experiment, such a junction was enclosed in a superconducting loop and so gave rise to the formation an RF-SQUID which interfered with a nearby flux-tunable transmon qubit. Periodic signatures observed in magnetic field sweeps revealed a strong AC-dispersive coupling of the parasitic RF-SQUID to both the qubit and its readout resonator, in addition to the DC-inductive coupling between RF-SQUID and qubit. Our finding sheds light on a previously unknown origin of decoherence due to parasitic Josephson junctions in superconducting circuits.

arXiv:2505.20458•Superconductor Science and Technology•Aug 20, 2025•2 citations

Superconducting quantum interference device with frequency-dependent damping: Readout of flux qubits

Timothy L. Robertson, B. L. T. Plourde, T. Hime +4 more

Recent experiments on superconducting flux qubits, consisting of a superconducting loop interrupted by Josephson junctions, have demonstrated quantum coherence between two different quantum states. The state of the qubit is measured with a superconducting quantum interference device (SQUID). Such measurements require the SQUID to have high resolution while exerting minimal backaction on the qubit. By designing shunts across the SQUID junctions appropriately, one can improve the measurement resolution without increasing the backaction significantly. Using a path-integral approach to analyze the Caldeira-Leggett model, we calculate the narrowing of the distribution of the switching events from the zero-voltage state of the SQUID for arbitrary shunt admittances, focusing on shunts consisting of a capacitance ${C}_{s}$ and resistance ${R}_{s}$ in series. To test this model, we fabricated a dc SQUID in which each junction is shunted with a thin-film interdigitated capacitor in series with a resistor, and measured the switching distribution as a function of temperature and applied magnetic flux. After accounting for the damping due to the SQUID leads, we found good agreement between the measured escape rates and the predictions of our model. We analyze the backaction of a shunted symmetric SQUID on a flux qubit. For the given parameters of our SQUID and realistic parameters for a flux qubit, at the degeneracy point we find a relaxation time of $113\phantom{\rule{0.3em}{0ex}}\ensuremath{\mu}\mathrm{s}$, which limits the decoherence time to $226\phantom{\rule{0.3em}{0ex}}\ensuremath{\mu}\mathrm{s}$. Based on our analysis of the escape process, we determine that a SQUID with purely capacitive shunts should have narrow switching distributions and no dissipation.

Physical Review B•Jul 11, 2005•23 citations
We report development and microwave characterization of rf SQUID (Superconducting QUantum Interference Device) qubits, consisting of an aluminium-based Josephson junction embedded in a superconducting loop patterned from a thin film of TiN with high kinetic inductance. Here we demonstrate that the systems can offer small physical size, high anharmonicity, and small scatter of device parameters. The work constitutes a non-tunable prototype realization of an rf SQUID qubit built on the kinetic inductance of a superconducting nanowire, proposed in Phys. Rev. Lett. 104, 027002 (2010). The hybrid devices can be utilized as tools to shed further light onto the origin of film dissipation and decoherence in phase-slip nanowire qubits, patterned entirely from disordered superconducting films.
At low temperature and low damping, the magnetic flux of a rf Superconducting QUantum Interference Device (SQUID) acts as a macroscopic quantum variable whose dynamic is described by a double well potential. A rf SQUID consists of a superconducting loop interrupted by a thin insulating barrier, known as a Josephson junction. The modified rf SQUID design discussed in this thesis has independent, in situ, controls that allow varying the barrier height between the potential wells and their relative tilt. This high level of control of the potential together with the capability to implement an experimental setup optimized to reduce coupling to external sources of noise, made this system ideal not only for tests of quantum transition at a macroscopic level, but also as a scalable solid state device for quantum computation. A variety of measurements of quantum phenomena are reported in this thesis, including microwave level spectroscopy, coherent oscillations, and macroscopic resonant tunneling (MRT). These measurements are compared with theoretical models to study the possible sources of decoherence in a rf SQUID qubit. The analysis confirmed that the main source of decoherence is not due to coupling to the external environment, but it can be linked to intrinsic low frequency flux noise. Work from many groups over the last several years has shown that the performance of a superconductive qubit is limited by coupling to spurious defects in the materials used for the device fabrication. In this work we analyze the possibility of using the MRT as a tool for future studies of effects of materials and fabrication process in the realization of improved qubits, and we also explore the feasibility for measurements of quantum phenomena that involve fast pulsing of the potential barrier height.
Quantum decoherence due to charge fluctuations is still a problem in many device architectures for quantum computing or metrology, but it can be suppressed by shunting the circuit with a high microwave impedance, known as a $s\phantom{\rule{0}{0ex}}u\phantom{\rule{0}{0ex}}p\phantom{\rule{0}{0ex}}e\phantom{\rule{0}{0ex}}r\phantom{\rule{0}{0ex}}i\phantom{\rule{0}{0ex}}n\phantom{\rule{0}{0ex}}d\phantom{\rule{0}{0ex}}u\phantom{\rule{0}{0ex}}c\phantom{\rule{0}{0ex}}t\phantom{\rule{0}{0ex}}a\phantom{\rule{0}{0ex}}n\phantom{\rule{0}{0ex}}c\phantom{\rule{0}{0ex}}e$. This study uses the kinetic inductance of a nanowire of disordered superconductor to demonstrate a low-loss, small-capacitance superinductor, in a simpler approach than the traditionally used Josephson-junction arrays. Such nanowire superinductors should have an impact on engineering long-lived superconducting qubits, and quantum-coherent experiments with mesoscopic systems.
The experimental demonstration of the coherent quantum phase slip (CQPS) in superconductors has opened a new direction of fundamental research and application of quantum cryogenic electronics. The flux qubit with CQPS center, new phase-locking mechanism, and suppression of the flux tunneling, the Charge Quantum Interference Device, dual Shapiro steps, and Bloch transistor were demonstrated. In part, progress is due to the emergence of new superconducting materials with high kinetic inductance, NbN, InOx, TiN, and AlOx; mature nanotechnology of the fabrication of nanowires and nanoscale Josephson junctions of nm sizes; and efficient protection of them from environmental noise. We review recent progress with CQPS and discuss further development of superconducting materials with high kinetic inductance and the emergence of devices with new functionalities.
Abstract Superconducting qubits show great promise to realize practical quantum computers from micro-fabricated integrated circuits. However, their solid-state architecture bears the burden of parasitic modes in qubit materials and the control circuitry which cause decoherence and interfere with qubits. Here, we present evidence that wirebonds, which are used to contact the micro-circuits and to realize chip-to-chip airbridges, may contain parasitic Josephson junctions. In our experiment, such a junction was enclosed in a superconducting loop and so gave rise to the formation an RF-SQUID which interfered with a nearby flux-tunable transmon qubit. Periodic signatures observed in magnetic field sweeps revealed a strong AC-dispersive coupling of the parasitic RF-SQUID to both the qubit and its readout resonator, in addition to the DC-inductive coupling between RF-SQUID and qubit. Our finding sheds light on a previously unknown origin of decoherence due to parasitic Josephson junctions in superconducting circuits.
Recent experiments on superconducting flux qubits, consisting of a superconducting loop interrupted by Josephson junctions, have demonstrated quantum coherence between two different quantum states. The state of the qubit is measured with a superconducting quantum interference device (SQUID). Such measurements require the SQUID to have high resolution while exerting minimal backaction on the qubit. By designing shunts across the SQUID junctions appropriately, one can improve the measurement resolution without increasing the backaction significantly. Using a path-integral approach to analyze the Caldeira-Leggett model, we calculate the narrowing of the distribution of the switching events from the zero-voltage state of the SQUID for arbitrary shunt admittances, focusing on shunts consisting of a capacitance Cs{C}_{s}Cs​ and resistance Rs{R}_{s}Rs​ in series. To test this model, we fabricated a dc SQUID in which each junction is shunted with a thin-film interdigitated capacitor in series with a resistor, and measured the switching distribution as a function of temperature and applied magnetic flux. After accounting for the damping due to the SQUID leads, we found good agreement between the measured escape rates and the predictions of our model. We analyze the backaction of a shunted symmetric SQUID on a flux qubit. For the given parameters of our SQUID and realistic parameters for a flux qubit, at the degeneracy point we find a relaxation time of $113\phantom{\rule{0.3em}{0ex}}\ensuremath{\mu}\mathrm{s}$, which limits the decoherence time to $226\phantom{\rule{0.3em}{0ex}}\ensuremath{\mu}\mathrm{s}$. Based on our analysis of the escape process, we determine that a SQUID with purely capacitive shunts should have narrow switching distributions and no dissipation.