The repetition code is an important primitive for the techniques of quantum error correction. Here we implement repetition codes of at most 15 qubits on the 16 qubit ibmqx3 device. Each experiment is run for a single round of syndrome measurements, achieved using the standard quantum technique of using ancilla qubits and controlled operations. The size of the final syndrome is small enough to allow for lookup table decoding using experimentally obtained data. The results show strong evidence that the logical error rate decays exponentially with code distance, as is expected and required for the development of fault-tolerant quantum computers. The results also give insight into the nature of noise in the device.
The repetition code is an important primitive for the techniques of quantum error correction. Here we implement repetition codes of at most 15 qubits on the 16 qubit ibmqx3 device. Each experiment is run for a single round of syndrome measurements, achieved using the standard quantum technique of using ancilla qubits and controlled operations. The size of the final syndrome is small enough to allow for lookup table decoding using experimentally obtained data. The results show strong evidence that the logical error rate decays exponentially with code distance, as is expected and required for the development of fault-tolerant quantum computers. The results also give insight into the nature of noise in the device.
Building reliable quantum computers requires protecting fragile quantum states from inevitable environmental noise and operational errors. While quantum error correction codes like the Steane [[7,1,3]] code provide elegant theoretical solutions, their practical success hinges critically on how we measure errors - a process called syndrome extraction. The challenge lies in the ancilla qubits used for measurement: when they fail, errors can cascade across the entire quantum system, destroying the very information we're trying to protect. We address this fundamental problem by implementing and comparing three sophisticated syndrome measurement strategies: Shor's cat-state approach, which distributes measurements across multiple entangled ancillas achieving 85-92% preparation success; Steane's encoded-ancilla method using complete error-corrected logical qubits reaching 97.8% syndrome fidelity; and a flexible unified framework that adapts strategies based on hardware capabilities. Through extensive simulations using IBM's Qiskit platform spanning randomized benchmarking and T-heavy circuits, we demonstrate that intelligent ancilla management improves error suppression by up to 2.4× compared to standard approaches. Our implementations achieve logical error rates as low as 5.1×10−5 under realistic noise conditions with physical error rates of 10−3, while maintaining near-unity logical fidelity (0.99997) even for deep circuits. The threshold analysis reveals robust performance across distance-3 to distance-13 codes with characteristic threshold curves showing exponential error suppression below the critical physical error rate. These results provide immediately deployable tools for near-term quantum devices and establish practical design principles for scaling toward fault-tolerant quantum computers.
Quantum error correcting codes are designed to pinpoint exactly when and where errors occur in quantum circuits. This feature is the foundation of their primary task: to support fault-tolerant quantum computation. However, this feature could used as the basis of benchmarking: By analyzing the outputs of even small-scale quantum error correction circuits, a detailed picture can be constructed of error processes across a quantum device. Here we perform an example of such an analysis, using the results of small repetition codes to determine the error rate of each qubit while idle during a syndrome measurement. This provides an idea of the errors experienced by the qubits across a device while they are part of the kind of circuit that we expect to be typical in fault-tolerant quantum computers.
Building reliable quantum computers requires protecting fragile quantum states from inevitable environmental noise and operational errors. While quantum error correction codes like the Steane [[7,1,3]] code provide elegant theoretical solutions, their practical success hinges critically on how we measure errors—a process called syndrome extraction. The challenge lies in the ancilla qubits used for measurement: when they fail, errors can cascade across the entire quantum system, destroying the very information we’re trying to protect. We address this fundamental problem by implementing and comparing three sophisticated syndrome measurement strategies: Shor’s cat-state approach, which distributes measurements across multiple entangled ancillas achieving 85-92% preparation success; Steane’s encoded-ancilla method using complete error-corrected logical qubits reaching 97.8% syndrome fidelity; and a flexible unified framework that adapts strategies based on hardware capabilities. Through extensive simulations using IBM’s Qiskit platform spanning randomized benchmarking and T-heavy circuits, we demonstrate that intelligent ancilla management improves error suppression by up to 2.4×compared to standard approaches. Our implementations achieve logical error rates as low as 5.1 ×10^−5 under realistic noise conditions with physical error rates of 10^−3, while maintaining near-unity logical fidelity (0.99997) even for deep circuits. The threshold analysis reveals robust performance across distance-3 to distance-13 codes with characteristic threshold curves showing exponential error suppression below the critical physical error rate. These results provide immediately deployable tools for near-term quantum devices and establish practical design principles for scaling toward fault-tolerant quantum computers.
Abstract Building reliable quantum computers requires protecting fragile quantum states from inevitable environmental noise and operational errors. While quantum error correction codes like the Steane [7,1,3] code provide elegant theoretical solutions, their practical success hinges critically on how we measure errors—a process called syndrome extraction. The challenge lies in the ancilla qubits used for measurement: when they fail, errors can cascade across the entire quantum system, destroying the very information we're trying to protect. We address this fundamental problem by implementing and comparing three sophisticated syndrome measurement strategies: Shor's cat-state approach, which distributes measurements across multiple entangled ancillas achieving 85-92% preparation success; Steane's encoded-ancilla method using complete error-corrected logical qubits reaching 97.8% syndrome fidelity; and a flexible unified framework that adapts strategies based on hardware capabilities. Through extensive simulations using IBM's Qiskit platform spanning randomized benchmarking and T-heavy circuits, we demonstrate that intelligent ancilla management improves error suppression by up to 2.4x compared to standard approaches. Our implementations achieve logical error rates as low as 5.1 x 10 -5 under realistic noise conditions with physical error rates of 10 -3 , while maintaining near-unity logical fidelity (0.99997) even for deep circuits. The threshold analysis reveals robust performance across distance-3 to distance-13 codes with characteristic threshold curves showing exponential error suppression below the critical physical error rate. These results provide immediately deployable tools for near-term quantum devices and establish practical design principles for scaling toward fault-tolerant quantum computers.
Quantum error correction promises a viable path to fault-tolerant computations, enabling exponential error suppression when the device's error rates remain below the protocol's threshold. However, this threshold strongly depends on the classical method used to decode the measurements of the syndrome. These classical algorithms traditionally only interpret binary data, ignoring valuable information contained in complete analog measurement data. We present the first large-scale experimental verification of soft decoding by implementing repetition codes up to distance 51 on superconducting hardware. Unlike previous demonstrations limited to small code distances, this extensive range allows us to confirm a fundamental improvement in the exponential scaling of error suppression rather than a mere constant-factor reduction in error rates. We observe a 25% increase in the threshold, which yields logical error rates up to 30 times lower than standard hard decoding. Analyzing the trade-off between information volume and decoding performance, we show that a single byte of information per measurement suffices to reach optimal decoding. This underscores the effectiveness and practicality of soft decoding on hardware, including in time-sensitive contexts such as real-time decoding.
Quantum error correction [1, 2, 3, 4] provides a path to reach practical quantum computing by combining multiple physical qubits into a logical qubit, where the logical error rate is suppressed exponentially as more qubits are added. However, this exponential suppression only occurs if the physical error rate is below a critical threshold. Here, we present two below-threshold surface code memories on our newest generation of superconducting processors, Willow: a distance-7 code, and a distance-5 code integrated with a real-time decoder. The logical error rate of our larger quantum memory is suppressed by a factor of Λ=2.14±0.02 when increasing the code distance by two, culminating in a 101-qubit distance-7 code with 0.143% ± 0.003% error per cycle of error correction. This logical memory is also beyond break-even, exceeding its best physical qubit’s lifetime by a factor of 2.4±0.3 . Our system maintains below-threshold performance when decoding in real time, achieving an average decoder latency of 63 μs at distance-5 up to a million cycles, with a cycle time of 1.1 μs. We also run repetition codes up to distance-29 and find that logical performance is limited by rare correlated error events occurring approximately once every hour, or 3×109 cycles. Our results present device performance that, if scaled, could realize the operational requirements of large scale fault-tolerant quantum algorithms.