Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1708.04273 · Applied Physics Letters

High-kinetic inductance additive manufactured superconducting microwave cavity

Eric T. Holland, Yaniv Jacob Rosen, Nicholas Materise, N. Woollett, Thomas Voisin, Y. Morris Wang, Sharon G. Torres, Jorge Mireles, G. Carosi, Jonathan L. DuBois

Published Nov 13, 2017• 12 citations
arXivHTMLPDF

Abstract

Investigations into the microwave surface impedance of superconducting resonators have led to the development of single photon counters that rely on kinetic inductance for their operation, while concurrent progress in additive manufacturing, “3D printing,” opens up a previously inaccessible design space for waveguide resonators. In this manuscript, we present results from the synthesis of these two technologies in a titanium, aluminum, vanadium (Ti-6Al-4V) superconducting radio frequency resonator which exploits a design unattainable through conventional fabrication means. We find that Ti-6Al-4V has two distinct superconducting transition temperatures observable in heat capacity measurements. The higher transition temperature is in agreement with DC resistance measurements, while the lower transition temperature, not previously known in the literature, is consistent with the observed temperature dependence of the superconducting microwave surface impedance. From the surface reactance, we extract a London penetration depth of 8 ± 3 μm—roughly an order of magnitude larger than other titanium alloys and several orders of magnitude larger than other conventional elemental superconductors.

DOI
10.1063/1.5000241

Related papers

Microwave loss and kinetic inductance of epitaxial TiN films

Yu Wu, Yixin Liu, Wanpeng Gao +7 more

Abstract Low microwave loss and regulatable kinetic inductance are two key characteristics of superconducting films to manufacture high-performance quantum devices. Epitaxial titanium nitride (TiN) thin films have been found to exhibit significant advantages in these two aspects. In this paper, we investigated into the dielectric loss and kinetic inductance of epitaxial TiN films, which were prepared on both silicon and sapphire substrates with different temperatures. Crystal structure, surface morphology, and superconducting properties were characterized systematically. The radio-frequency response of microwave resonators made of TiN films was studied at low temperatures to extract the information of kinetic inductance and quality factor. We obtained the highest internal quality factor up to 1.6 × 10 6 at single photon regime and achieved a regulation of kinetic inductance exceeding 16 times by altering the substrate and the sputtering temperature of the TiN films. This work not only provides an essential foundation for the precise design and preparation of low-loss TiN resonators for superconducting quantum bits, but also demonstrates TiN film as an excellent material platform with both low microwave loss and high kinetic inductance that can be applied in other fields such as microwave kinetic inductance detectors.

Superconductor Science and Technology•Sep 18, 2024•7 citations

Frequency-tunable superconducting resonators via nonlinear kinetic inductance

Michael R. Vissers, Johannes Hubmayr, Martin Sandberg +3 more

We have designed, fabricated, and tested a frequency-tunable high-Q superconducting resonator made from a niobium titanium nitride film. The frequency tunability is achieved by injecting a DC through a current-directing circuit into the nonlinear inductor whose kinetic inductance is current-dependent. We have demonstrated continuous tuning of the resonance frequency in a 180 MHz frequency range around 4.5 GHz while maintaining the high internal quality factor Qi > 180 000. This device may serve as a tunable filter and find applications in superconducting quantum computing and measurement. It also provides a useful tool to study the nonlinear response of a superconductor. In addition, it may be developed into techniques for measurement of the complex impedance of a superconductor at its transition temperature and for readout of transition-edge sensors.

arXiv:1507.05126•Applied Physics Letters•Aug 10, 2015•90 citations

Engineering high-Q superconducting tantalum microwave coplanar waveguide resonators for compact coherent quantum circuit

Shima Poorgholam-Khanjari, Valentino Seferai, Paniz Foshat +5 more

Abstract Tantalum (Ta) has recently received considerable attention in manufacturing robust superconducting quantum circuits. Ta offers low microwave loss, high kinetic inductance compared to aluminium (Al) and niobium (Nb), and good compatibility with complementary metal-oxide-semiconductor (CMOS) technology, which is essential for quantum computing applications. Here we demonstrate the fabrication engineering of thickness-dependent high-quality-factor (high- $$\:{Q}_{i}$$ ) Ta superconducting microwave coplanar waveguide resonators. All films are deposited on high-resistivity silicon substrates at room temperature without additional substrate heating. Before Ta deposition, a niobium (Nb) seed layer is used to promote a body-centred cubic lattice ( $$\:\alpha\:$$ -Ta) formation. We further engineer the kinetic inductance ( $$\:{L}_{K}$$ ) of the resonators by varying Ta film thicknesses. High $$\:{L}_{K}$$ is a key advantage for applications because it facilitates the realisation of high-impedance, compact quantum circuits with enhanced coupling to qubits. The maximum internal quality factor $$\:{Q}_{i}$$ of $$\:\sim\:$$ 3.6 × 10 6 in the high power regime and $$\:{Q}_{i}$$ of $$\:\sim\:$$ 4.5 × 10 5 in the single-photon regime is achieved for 100 nm Ta which represents an improvement over previous room-temperature deposited Ta resonators on silicon substrates in the single photon regime, while the highest kinetic inductance of 0.6 pH/sq is obtained for the thinnest film, which is 40 nm. This combination of high $$\:{Q}_{i}$$ and high $$\:{L}_{K}$$ highlights the potential of Ta microwave circuits for high-fidelity operation of compact quantum circuits.

arXiv:2412.16099•Scientific Reports•Jul 25, 2025•20 citations

Minimizing Kinetic Inductance in Tantalum-Based Superconducting Coplanar Waveguide Resonators for Alleviating Frequency Fluctuation Issues

Dengfeng Li, Jingjing Hu, Li, Yuan +1 more

Advancements in the fabrication of superconducting quantum devices have highlighted tantalum as a promising material, owing to its low surface oxidation microwave loss at low temperatures. However, tantalum films exhibit significantly larger kinetic inductances compared to materials such as aluminum or niobium. Given the inevitable variations in film thickness, this increased kinetic inductance leads to considerable, uncontrolled frequency variances and shifts in components like superconducting coplanar waveguide (SCPW) resonators. Achieving high precision in resonator frequencies is crucial, particularly when multiple resonators share a common Purcell filter with limited bandwidth in superconducting quantum information processors. Here, we tackle this challenge from both fabrication and design perspectives, achieving a reduction in resonator frequency fluctuation by a factor of more than 100. Concurrently, the internal quality factor of the SCPW resonator remains at high level. Our findings open up new avenues for the enhanced utilization of tantalum in large-scale superconducting chips.

arXiv:2405.02955•May 5, 2024•9 citations

Loss mechanisms in TiN high impedance superconducting microwave circuits

Kazi Rafsanjani Amin, Carine Ladner, Guillaume Jourdan +3 more

Aluminum-based platforms have allowed to reach major milestones for superconducting quantum circuits. For the next generation of devices, materials that are able to maintain low microwave losses while providing new functionalities, such as large kinetic inductance or compatibility with CMOS platform, are needed. Here, we report on a combined direct current and microwave investigation of titanium nitride films of different thicknesses grown using CMOS compatible methods. For microwave resonators made of 3 nm thick TiN, we measured large kinetic inductance LK ∼240 pH/sq, high mode impedance of ∼4.2 kΩ while maintaining microwave quality factor ∼105 in the single photon limit. We present an in-depth study of the microwave loss mechanisms in these devices that indicates the importance of quasiparticles and provide insight for further improvement.

arXiv:2109.06491•Applied Physics Letters•Apr 18, 2022•36 citations

Measuring kinetic inductance and superfluid stiffness of two-dimensional superconductors using high-quality transmission-line resonators

Mary Kreidel, Xuanjing Chu, Jesse Balgley +8 more

The discovery of van der Waals superconductors in recent years has generated a lot of excitement for their potentially novel pairing mechanisms. However, their typical atomic-scale thickness and micrometer-scale lateral dimensions impose severe challenges to investigations of pairing symmetry by conventional methods. We demonstrate an improved technique that employs high-quality-factor superconducting resonators to measure the kinetic inductance—up to one part per million—and loss of a van der Waals superconductor. We analyze the equivalent circuit model to extract the kinetic inductance, superfluid stiffness, penetration depth, and ratio of imaginary and real parts of the complex conductivity. We validate the technique by measuring aluminum and finding excellent agreement in both the zero-temperature superconducting gap as well as the complex conductivity data when compared with BCS theory. We then demonstrate the utility of the technique by measuring the kinetic inductance of multilayered niobium diselenide and discuss the limits to the accuracy of our technique when the transition temperature of the sample, NbSe 2 at 7.06 K, approaches our Nb probe resonator at 8.59 K. Our method will be useful for practitioners in the growing fields of superconducting physics, materials science, and quantum sensing, as a means of characterizing superconducting circuit components and studying pairing mechanisms of the novel superconducting states which arise in layered two-dimensional materials and heterostructures. Published by the American Physical Society 2024

arXiv:2407.09916•Physical Review Research•Dec 6, 2024•22 citations
Investigations into the microwave surface impedance of superconducting resonators have led to the development of single photon counters that rely on kinetic inductance for their operation, while concurrent progress in additive manufacturing, “3D printing,” opens up a previously inaccessible design space for waveguide resonators. In this manuscript, we present results from the synthesis of these two technologies in a titanium, aluminum, vanadium (Ti-6Al-4V) superconducting radio frequency resonator which exploits a design unattainable through conventional fabrication means. We find that Ti-6Al-4V has two distinct superconducting transition temperatures observable in heat capacity measurements. The higher transition temperature is in agreement with DC resistance measurements, while the lower transition temperature, not previously known in the literature, is consistent with the observed temperature dependence of the superconducting microwave surface impedance. From the surface reactance, we extract a London penetration depth of 8 ± 3 μm—roughly an order of magnitude larger than other titanium alloys and several orders of magnitude larger than other conventional elemental superconductors.
Abstract Low microwave loss and regulatable kinetic inductance are two key characteristics of superconducting films to manufacture high-performance quantum devices. Epitaxial titanium nitride (TiN) thin films have been found to exhibit significant advantages in these two aspects. In this paper, we investigated into the dielectric loss and kinetic inductance of epitaxial TiN films, which were prepared on both silicon and sapphire substrates with different temperatures. Crystal structure, surface morphology, and superconducting properties were characterized systematically. The radio-frequency response of microwave resonators made of TiN films was studied at low temperatures to extract the information of kinetic inductance and quality factor. We obtained the highest internal quality factor up to 1.6 × 10 6 at single photon regime and achieved a regulation of kinetic inductance exceeding 16 times by altering the substrate and the sputtering temperature of the TiN films. This work not only provides an essential foundation for the precise design and preparation of low-loss TiN resonators for superconducting quantum bits, but also demonstrates TiN film as an excellent material platform with both low microwave loss and high kinetic inductance that can be applied in other fields such as microwave kinetic inductance detectors.
We have designed, fabricated, and tested a frequency-tunable high-Q superconducting resonator made from a niobium titanium nitride film. The frequency tunability is achieved by injecting a DC through a current-directing circuit into the nonlinear inductor whose kinetic inductance is current-dependent. We have demonstrated continuous tuning of the resonance frequency in a 180 MHz frequency range around 4.5 GHz while maintaining the high internal quality factor Qi > 180 000. This device may serve as a tunable filter and find applications in superconducting quantum computing and measurement. It also provides a useful tool to study the nonlinear response of a superconductor. In addition, it may be developed into techniques for measurement of the complex impedance of a superconductor at its transition temperature and for readout of transition-edge sensors.
Abstract Tantalum (Ta) has recently received considerable attention in manufacturing robust superconducting quantum circuits. Ta offers low microwave loss, high kinetic inductance compared to aluminium (Al) and niobium (Nb), and good compatibility with complementary metal-oxide-semiconductor (CMOS) technology, which is essential for quantum computing applications. Here we demonstrate the fabrication engineering of thickness-dependent high-quality-factor (high-  Qi\:{Q}_{i}Qi​ ) Ta superconducting microwave coplanar waveguide resonators. All films are deposited on high-resistivity silicon substrates at room temperature without additional substrate heating. Before Ta deposition, a niobium (Nb) seed layer is used to promote a body-centred cubic lattice (  α \:\alpha\:α -Ta) formation. We further engineer the kinetic inductance (  LK\:{L}_{K}LK​ ) of the resonators by varying Ta film thicknesses. High  LK\:{L}_{K}LK​ is a key advantage for applications because it facilitates the realisation of high-impedance, compact quantum circuits with enhanced coupling to qubits. The maximum internal quality factor  Qi\:{Q}_{i}Qi​ of  ∼ \:\sim\:∼ 3.6 × 10 6 in the high power regime and  Qi\:{Q}_{i}Qi​ of  ∼ \:\sim\:∼ 4.5 × 10 5 in the single-photon regime is achieved for 100 nm Ta which represents an improvement over previous room-temperature deposited Ta resonators on silicon substrates in the single photon regime, while the highest kinetic inductance of 0.6 pH/sq is obtained for the thinnest film, which is 40 nm. This combination of high  Qi\:{Q}_{i}Qi​ and high  LK\:{L}_{K}LK​ highlights the potential of Ta microwave circuits for high-fidelity operation of compact quantum circuits.
Advancements in the fabrication of superconducting quantum devices have highlighted tantalum as a promising material, owing to its low surface oxidation microwave loss at low temperatures. However, tantalum films exhibit significantly larger kinetic inductances compared to materials such as aluminum or niobium. Given the inevitable variations in film thickness, this increased kinetic inductance leads to considerable, uncontrolled frequency variances and shifts in components like superconducting coplanar waveguide (SCPW) resonators. Achieving high precision in resonator frequencies is crucial, particularly when multiple resonators share a common Purcell filter with limited bandwidth in superconducting quantum information processors. Here, we tackle this challenge from both fabrication and design perspectives, achieving a reduction in resonator frequency fluctuation by a factor of more than 100. Concurrently, the internal quality factor of the SCPW resonator remains at high level. Our findings open up new avenues for the enhanced utilization of tantalum in large-scale superconducting chips.
Aluminum-based platforms have allowed to reach major milestones for superconducting quantum circuits. For the next generation of devices, materials that are able to maintain low microwave losses while providing new functionalities, such as large kinetic inductance or compatibility with CMOS platform, are needed. Here, we report on a combined direct current and microwave investigation of titanium nitride films of different thicknesses grown using CMOS compatible methods. For microwave resonators made of 3 nm thick TiN, we measured large kinetic inductance LK ∼240 pH/sq, high mode impedance of ∼4.2 kΩ while maintaining microwave quality factor ∼105 in the single photon limit. We present an in-depth study of the microwave loss mechanisms in these devices that indicates the importance of quasiparticles and provide insight for further improvement.
The discovery of van der Waals superconductors in recent years has generated a lot of excitement for their potentially novel pairing mechanisms. However, their typical atomic-scale thickness and micrometer-scale lateral dimensions impose severe challenges to investigations of pairing symmetry by conventional methods. We demonstrate an improved technique that employs high-quality-factor superconducting resonators to measure the kinetic inductance—up to one part per million—and loss of a van der Waals superconductor. We analyze the equivalent circuit model to extract the kinetic inductance, superfluid stiffness, penetration depth, and ratio of imaginary and real parts of the complex conductivity. We validate the technique by measuring aluminum and finding excellent agreement in both the zero-temperature superconducting gap as well as the complex conductivity data when compared with BCS theory. We then demonstrate the utility of the technique by measuring the kinetic inductance of multilayered niobium diselenide and discuss the limits to the accuracy of our technique when the transition temperature of the sample, NbSe 2 at 7.06 K, approaches our Nb probe resonator at 8.59 K. Our method will be useful for practitioners in the growing fields of superconducting physics, materials science, and quantum sensing, as a means of characterizing superconducting circuit components and studying pairing mechanisms of the novel superconducting states which arise in layered two-dimensional materials and heterostructures. Published by the American Physical Society 2024