Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1706.06536

Quantum Control and Quantum Tomography on Neutral Atom Qudits

Hector Sosa Martinez

Published Jun 20, 2017• 4 citations
arXivHTMLPDF

Abstract

Neutral atom systems are an appealing platform for the development and testing of quantum control and measurement techniques. This dissertation presents experimental investigations of control and measurement tools using as a testbed the 16-dimensional hyperfine manifold associated with the electronic ground state of $^{133}$Cs atoms. On the control side, we present an experimental realization of a protocol to implement robust unitary transformations in the presence of static and dynamic perturbations. We also present an experimental realization of inhomogeneous quantum control. Specifically, we demonstrate our ability to perform two different unitary transformations on atoms that see different light shifts from an optical addressing field. On the measurement side, we present experimental realizations of quantum state and process tomography. The state tomography project encompasses a comprehensive evaluation of several measurement strategies and state estimation algorithms. Our experimental results show that in the presence of experimental imperfections, there is a clear tradeoff between accuracy, efficiency and robustness in the reconstruction. The process tomography project involves an experimental demonstration of efficient reconstruction by using a set of intelligent probe states. Experimental results show that we are able to reconstruct unitary maps in Hilbert spaces with dimension ranging from $d = 4$ to $d = 16$. To the best of our knowledge, this is the first time that a unitary process in $d = 16$ is successfully reconstructed in the laboratory.

DOI
10.48550/arxiv.1706.06536

Related papers

Continuous Measurement Quantum State Tomography of Atomic Ensembles

Riofrio Almeida, A R Carlos

Quantum state tomography is a fundamental tool in quantum information processing. It allows us to estimate the state of a quantum system by measuring different observables on many identically prepared copies of the system. This is, in general, a very time-consuming task that requires a large number of measurements. There are, however, systems in which the data acquisition can be done more efficiently. In fact, an ensemble of quantum systems can be prepared and manipulated by external fields while being continuously and collectively probed, producing enough information to estimate its state. This provides a basis for continuous measurement quantum tomography. In this protocol, an ensemble of identically prepared systems is collectively probed and controlled in a time-dependent manner to create an informationally complete continuous measurement record. The measurement history is then inverted to determine the state at the initial time. We use two different estimation methods: maximum likelihood and compressed sensing. The general formalism is applied to the case of reconstruction of the quantum state encoded in the magnetic sub-levels of a large-spin alkali atom, ${}^{133}$Cs. We apply this protocol to the case of reconstruction of states in the full 16-dimensional electronic-ground subspace ($F=3 \oplus F=4$), controlled by microwaves and radio-frequency magnetic fields. We present an experimental demonstration of continuous measurement quantum tomography in an ensemble of cold cesium atoms with full control of its 16-dimensional Hilbert space. We show the exquisite level of control achieved in the lab and the excellent agreement between the theory discussed in this dissertation and the experimental results. This allows us to achieve fidelities >95% for low complexity quantum states, and >92% for arbitrary random states, which is a formidable accomplishment for a space of this size.

•Jan 1, 2012•4 citations

Continuous Measurement Quantum State Tomography of Atomic Ensembles

Carlos A. Riofrío

Quantum state tomography is a fundamental tool in quantum information processing. It allows us to estimate the state of a quantum system by measuring different observables on many identically prepared copies of the system. This is, in general, a very time-consuming task that requires a large number of measurements. There are, however, systems in which the data acquisition can be done more efficiently. In fact, an ensemble of quantum systems can be prepared and manipulated by external fields while being continuously and collectively probed, producing enough information to estimate its state. This provides a basis for continuous measurement quantum tomography. In this protocol, an ensemble of identically prepared systems is collectively probed and controlled in a time-dependent manner to create an informationally complete continuous measurement record. The measurement history is then inverted to determine the state at the initial time. We use two different estimation methods: maximum likelihood and compressed sensing. The general formalism is applied to the case of reconstruction of the quantum state encoded in the magnetic sub-levels of a large-spin alkali atom, ${}^{133}$Cs. We apply this protocol to the case of reconstruction of states in the full 16-dimensional electronic-ground subspace ($F=3 \oplus F=4$), controlled by microwaves and radio-frequency magnetic fields. We present an experimental demonstration of continuous measurement quantum tomography in an ensemble of cold cesium atoms with full control of its 16-dimensional Hilbert space. We show the exquisite level of control achieved in the lab and the excellent agreement between the theory discussed in this dissertation and the experimental results. This allows us to achieve fidelities >95% for low complexity quantum states, and >92% for arbitrary random states, which is a formidable accomplishment for a space of this size.

arXiv:1111.5627•Nov 23, 2011•4 citations

Accurate and Robust Unitary Transformations of a High-Dimensional Quantum System

Brian E. Anderson, Hector Sosa Martinez, Carlos A. Riofrío +2 more

Unitary transformations are the most general input-output maps available in closed quantum systems. Good control protocols have been developed for qubits, but questions remain about the use of optimal control theory to design unitary maps in high-dimensional Hilbert spaces, and about the feasibility of their robust implementation in the laboratory. Here we design and implement unitary maps in a 16-dimensional Hilbert space associated with the 6S(1/2) ground state of (133)Cs, achieving fidelities >0.98 with built-in robustness to static and dynamic perturbations. Our work has relevance for quantum information processing and provides a template for similar advances on other physical platforms.

arXiv:1410.3891•Physical Review Letters•Jun 16, 2015•99 citations

Quantum Control in the Cs 6S1/2 Ground Manifold Using Radio-Frequency and Microwave Magnetic Fields

Aaron C.T. Smith, Brian E. Anderson, Hector Sosa Martinez +3 more

We implement arbitrary maps between pure states in the 16-dimensional Hilbert space associated with the ground electronic manifold of ^{133}Cs. This is accomplished by driving atoms with phase modulated radio-frequency and microwave fields, using modulation waveforms found via numerical optimization and designed to work robustly in the presence of imperfections. We evaluate the performance of a sample of randomly chosen state maps by randomized benchmarking, obtaining an average fidelity >99%. Our protocol advances state-of-the-art quantum control and has immediate applications in quantum metrology and tomography.

arXiv:1308.4731•Physical Review Letters•Oct 24, 2013•66 citations

Efficient and Robust Methods for Quantum Tomography

Charles H. Baldwin

The development of large-scale platforms for quantum information requires new methods for verification and validation of quantum behavior. Quantum tomography (QT) is the standard tool for diagnosing quantum states, process, and readout devices by providing complete information. However, QT is limited since it is expensive to not only implement experimentally, but also requires heavy classical post-processing of data. In this dissertation, we introduce new methods for QT that are more efficient to implement and robust to noise and errors, thereby making QT a more practical tool for current quantum information experiments. The crucial detail that makes these new, efficient, and robust methods possible is prior information about the quantum system. This prior information is prompted by the goals of most experiments in quantum information, which require pure states, unitary processes, and rank-1 POVM operators. Therefore, most experiments are designed to operate near this ideal regime. We show that when this is the case, QT can be accomplished with significantly fewer resources, and produce a robust estimate in the presence of noise and errors. Moreover, the estimate is also robust if the state is not exactly pure, the process is not exactly unitary, or the POVM is not exactly rank-1. Such compelling methods are only made possible by the positivity constraint on quantum states, processes, and POVMs. This requirement is an inherent feature of quantum mechanics, but has powerful consequences to QT. Since QT is necessarily an experimental tool, we discuss a test of these new methods in an experimental setting. The physical system is an ensemble of laser-cooled cesium atoms in the laboratory of Prof. Poul Jessen. Experiments were conducted by Hector Sosa-Martinez et al. to demonstrate different QT protocols. We compare the results, and conclude that the new methods are effective.

arXiv:1701.01764•Jan 6, 2017•3 citations

Quantum tomography of the full hyperfine manifold of atomic spins via continuous measurement on an ensemble

Carlos A. Riofrío, Poul Jessen, Ivan Deutsch

Quantum state reconstruction based on weak continuous measurement has the advantage of being fast, accurate and almost non-perturbative. In this work we present a pedagogical review of the protocol proposed by Silberfarb et al (2005 Phys. Rev. Lett. 95 030402), whereby an ensemble of identically prepared systems is collectively probed and controlled in a time-dependent manner so as to create an informationally complete continuous measurement record. The measurement history is then inverted to determine the state at the initial time through a maximum-likelihood estimate. The general formalism is applied to the case of reconstruction of the quantum state encoded in the magnetic sublevels of a large-spin alkali atom, 133 Cs. We detail two different protocols for control. Using magnetic interactions and a quadratic ac Stark shift, we can reconstruct a chosen hyperfine manifold F , e.g. the seven-dimensional F = 3 manifold in the electronic ground state of Cs. We review the procedure as implemented in experiments (Smith et al 2006 Phys. Rev. Lett. 97 180403). We extend the protocol to the more ambitious case of reconstruction of states in the full 16-dimensional electronic ground subspace ( F = 3⊕ F = 4), controlled by microwaves and radio-frequency (RF) magnetic fields. We give detailed derivations of all physical interactions, approximations, numerical methods and fitting procedures, tailored to the realistic experimental setting. For the case of light-shift and magnetic control, reconstruction fidelities of ∼0.95 have been achieved, limited primarily by inhomogeneities in the light-shift. For the case of microwave/RF-control we simulate fidelity >0.97, limited primarily by signal-to-noise.

arXiv:1012.3477•Journal of Physics B Atomic Molecular and Optical Physics•Jul 25, 2011•27 citations
Neutral atom systems are an appealing platform for the development and testing of quantum control and measurement techniques. This dissertation presents experimental investigations of control and measurement tools using as a testbed the 16-dimensional hyperfine manifold associated with the electronic ground state of 133^{133}133Cs atoms. On the control side, we present an experimental realization of a protocol to implement robust unitary transformations in the presence of static and dynamic perturbations. We also present an experimental realization of inhomogeneous quantum control. Specifically, we demonstrate our ability to perform two different unitary transformations on atoms that see different light shifts from an optical addressing field. On the measurement side, we present experimental realizations of quantum state and process tomography. The state tomography project encompasses a comprehensive evaluation of several measurement strategies and state estimation algorithms. Our experimental results show that in the presence of experimental imperfections, there is a clear tradeoff between accuracy, efficiency and robustness in the reconstruction. The process tomography project involves an experimental demonstration of efficient reconstruction by using a set of intelligent probe states. Experimental results show that we are able to reconstruct unitary maps in Hilbert spaces with dimension ranging from d=4d = 4d=4 to d=16d = 16d=16. To the best of our knowledge, this is the first time that a unitary process in d=16d = 16d=16 is successfully reconstructed in the laboratory.
Quantum state tomography is a fundamental tool in quantum information processing. It allows us to estimate the state of a quantum system by measuring different observables on many identically prepared copies of the system. This is, in general, a very time-consuming task that requires a large number of measurements. There are, however, systems in which the data acquisition can be done more efficiently. In fact, an ensemble of quantum systems can be prepared and manipulated by external fields while being continuously and collectively probed, producing enough information to estimate its state. This provides a basis for continuous measurement quantum tomography. In this protocol, an ensemble of identically prepared systems is collectively probed and controlled in a time-dependent manner to create an informationally complete continuous measurement record. The measurement history is then inverted to determine the state at the initial time. We use two different estimation methods: maximum likelihood and compressed sensing. The general formalism is applied to the case of reconstruction of the quantum state encoded in the magnetic sub-levels of a large-spin alkali atom, 133{}^{133}133Cs. We apply this protocol to the case of reconstruction of states in the full 16-dimensional electronic-ground subspace (F=3⊕F=4F=3 \oplus F=4F=3⊕F=4), controlled by microwaves and radio-frequency magnetic fields. We present an experimental demonstration of continuous measurement quantum tomography in an ensemble of cold cesium atoms with full control of its 16-dimensional Hilbert space. We show the exquisite level of control achieved in the lab and the excellent agreement between the theory discussed in this dissertation and the experimental results. This allows us to achieve fidelities >95% for low complexity quantum states, and >92% for arbitrary random states, which is a formidable accomplishment for a space of this size.
Quantum state tomography is a fundamental tool in quantum information processing. It allows us to estimate the state of a quantum system by measuring different observables on many identically prepared copies of the system. This is, in general, a very time-consuming task that requires a large number of measurements. There are, however, systems in which the data acquisition can be done more efficiently. In fact, an ensemble of quantum systems can be prepared and manipulated by external fields while being continuously and collectively probed, producing enough information to estimate its state. This provides a basis for continuous measurement quantum tomography. In this protocol, an ensemble of identically prepared systems is collectively probed and controlled in a time-dependent manner to create an informationally complete continuous measurement record. The measurement history is then inverted to determine the state at the initial time. We use two different estimation methods: maximum likelihood and compressed sensing. The general formalism is applied to the case of reconstruction of the quantum state encoded in the magnetic sub-levels of a large-spin alkali atom, 133{}^{133}133Cs. We apply this protocol to the case of reconstruction of states in the full 16-dimensional electronic-ground subspace (F=3⊕F=4F=3 \oplus F=4F=3⊕F=4), controlled by microwaves and radio-frequency magnetic fields. We present an experimental demonstration of continuous measurement quantum tomography in an ensemble of cold cesium atoms with full control of its 16-dimensional Hilbert space. We show the exquisite level of control achieved in the lab and the excellent agreement between the theory discussed in this dissertation and the experimental results. This allows us to achieve fidelities >95% for low complexity quantum states, and >92% for arbitrary random states, which is a formidable accomplishment for a space of this size.
Unitary transformations are the most general input-output maps available in closed quantum systems. Good control protocols have been developed for qubits, but questions remain about the use of optimal control theory to design unitary maps in high-dimensional Hilbert spaces, and about the feasibility of their robust implementation in the laboratory. Here we design and implement unitary maps in a 16-dimensional Hilbert space associated with the 6S(1/2) ground state of (133)Cs, achieving fidelities >0.98 with built-in robustness to static and dynamic perturbations. Our work has relevance for quantum information processing and provides a template for similar advances on other physical platforms.
We implement arbitrary maps between pure states in the 16-dimensional Hilbert space associated with the ground electronic manifold of ^{133}Cs. This is accomplished by driving atoms with phase modulated radio-frequency and microwave fields, using modulation waveforms found via numerical optimization and designed to work robustly in the presence of imperfections. We evaluate the performance of a sample of randomly chosen state maps by randomized benchmarking, obtaining an average fidelity >99%. Our protocol advances state-of-the-art quantum control and has immediate applications in quantum metrology and tomography.
The development of large-scale platforms for quantum information requires new methods for verification and validation of quantum behavior. Quantum tomography (QT) is the standard tool for diagnosing quantum states, process, and readout devices by providing complete information. However, QT is limited since it is expensive to not only implement experimentally, but also requires heavy classical post-processing of data. In this dissertation, we introduce new methods for QT that are more efficient to implement and robust to noise and errors, thereby making QT a more practical tool for current quantum information experiments. The crucial detail that makes these new, efficient, and robust methods possible is prior information about the quantum system. This prior information is prompted by the goals of most experiments in quantum information, which require pure states, unitary processes, and rank-1 POVM operators. Therefore, most experiments are designed to operate near this ideal regime. We show that when this is the case, QT can be accomplished with significantly fewer resources, and produce a robust estimate in the presence of noise and errors. Moreover, the estimate is also robust if the state is not exactly pure, the process is not exactly unitary, or the POVM is not exactly rank-1. Such compelling methods are only made possible by the positivity constraint on quantum states, processes, and POVMs. This requirement is an inherent feature of quantum mechanics, but has powerful consequences to QT. Since QT is necessarily an experimental tool, we discuss a test of these new methods in an experimental setting. The physical system is an ensemble of laser-cooled cesium atoms in the laboratory of Prof. Poul Jessen. Experiments were conducted by Hector Sosa-Martinez et al. to demonstrate different QT protocols. We compare the results, and conclude that the new methods are effective.
Quantum state reconstruction based on weak continuous measurement has the advantage of being fast, accurate and almost non-perturbative. In this work we present a pedagogical review of the protocol proposed by Silberfarb et al (2005 Phys. Rev. Lett. 95 030402), whereby an ensemble of identically prepared systems is collectively probed and controlled in a time-dependent manner so as to create an informationally complete continuous measurement record. The measurement history is then inverted to determine the state at the initial time through a maximum-likelihood estimate. The general formalism is applied to the case of reconstruction of the quantum state encoded in the magnetic sublevels of a large-spin alkali atom, 133 Cs. We detail two different protocols for control. Using magnetic interactions and a quadratic ac Stark shift, we can reconstruct a chosen hyperfine manifold F , e.g. the seven-dimensional F = 3 manifold in the electronic ground state of Cs. We review the procedure as implemented in experiments (Smith et al 2006 Phys. Rev. Lett. 97 180403). We extend the protocol to the more ambitious case of reconstruction of states in the full 16-dimensional electronic ground subspace ( F = 3⊕ F = 4), controlled by microwaves and radio-frequency (RF) magnetic fields. We give detailed derivations of all physical interactions, approximations, numerical methods and fitting procedures, tailored to the realistic experimental setting. For the case of light-shift and magnetic control, reconstruction fidelities of ∼0.95 have been achieved, limited primarily by inhomogeneities in the light-shift. For the case of microwave/RF-control we simulate fidelity >0.97, limited primarily by signal-to-noise.