A reciprocal relationship between the autocovariance of the light intensity in the source plane and in the far-field detector plane is presented in a form analogous to the classical van Cittert-Zernike theorem, but involving intensity correlation functions. A "classical" version of the reciprocity relationship is considered first, based on the assumption of circular Gaussian statistics of the complex amplitudes in the source plane. The result is consistent with the theory of Hanbury Brown-Twiss interferometry, but it is shown to be also applicable to estimation of the source size or the spatial resolution of the detector from the noise power spectrum of flat-field images. An alternative version of the van Cittert-Zernike theorem for intensity correlations is then derived for a quantized electromagnetic beam in a coherent state, which leads to Poisson statistics for the intrinsic intensity of the beam.
A reciprocal relationship between the autocovariance of the light intensity in the source plane and in the far-field detector plane is presented in a form analogous to the classical van Cittert-Zernike theorem, but involving intensity correlation functions. A "classical" version of the reciprocity relationship is considered first, based on the assumption of circular Gaussian statistics of the complex amplitudes in the source plane. The result is consistent with the theory of Hanbury Brown-Twiss interferometry, but it is shown to be also applicable to estimation of the source size or the spatial resolution of the detector from the noise power spectrum of flat-field images. An alternative version of the van Cittert-Zernike theorem for intensity correlations is then derived for a quantized electromagnetic beam in a coherent state, which leads to Poisson statistics for the intrinsic intensity of the beam.
Due to the effects of source bandwidth and propagation of light waves, there exist correlations between fields at two space-time points. This chapter defines important properties of optical fields, viz. the spatial and the temporal coherence, and introduces these concepts for a single scalar component of the electromagnetic-field of light waves. It describes an important result concerning the propagation of the correlation functions using van Cittert and Zernike theorem. The chapter then focuses on a surprising interference effect - the intensity interference (Hanbury Brown and Twiss effect). When photon counting statistics for a given state of light field is of interest, the statistical distribution of number of photons can be determining correctly by considering the fluctuations in the light intensity and the statistical nature of the detection process. Speckle is a complex interference phenomenon commonly observed in the laboratory when a coherent laser beam scatters off a rough surface.
We derive an extension of the Van Cittert and Zernike theorem (VCZT), which holds very near to planar quasihomogeneous radiation sources. This derivation is based on paraxial propagation of the Wigner distribution function of the scalar field. We identify a critical distance from the source. Below this distance (deep Fresnel region) the field autocorrelation function is invariant upon propagation and the propagated field contains information about the correlation properties of the radiation source. Beyond the critical distance, the classical VCZT theorem is found to hold and no information about the source correlation can be recovered. The transition between the two regimes is described analytically for a simple case.
Imaging is the estimation of the spatial distribution of a physical object by measuring the optical radiation it emits, or by making use of an optical wave that interacts with the object, via reflection or transmission, for example, before being measured by a detector. The resolution of an imaging system is limited by the inability to localize the optical field at points of the object. Under otherwise ideal conditions, resolution is limited by diffraction. The sensitivity of an imaging system is limited by the uncertainty in the measurement. Under ideal conditions, this is determined by photon noise, which depends on the statistical fluctuations of the light. In conventional imaging systems, an extended detector, such as a CCD camera or an array detector, measures the spatial distribution of the optical intensity, which is proportional to the photon flux density. In interferometric systems, the spatial distribution of the optical field is inferred from measurements of the optical intensity. With the emergence of coherence theory, imaging systems based on measurements of the second-order coherence function at pairs of points in the detection plane were developed. An example is the imaging of an incoherent object based on the van Cittert-Zernike theorem. Imaging systems based on measurement of intensity correlation, or the photon coincidence rate, at pairs of points, were developed in the 1960s. A classic example of the photon-correlation imaging of an object emitting thermal light is stellar imaging using a Hanbury-Brown-Twiss intensity-correlation interferometer. More recently, two-photon light, which may be generated via spontaneous parametric downconversion in a second-order nonlinear optical crystal, has been used for imaging. This type of two-photon (or biphoton) imaging, which has come to be called quantum imaging, is also based on the measurement of photon coincidence by the use of photon-counting array detectors or by scanning two photon-counting detectors at pairs of points. To compare the resolution and sensitivity of imaging systems based on the aforementioned types of measurements, it is necessary to derive expressions for the measured quantities in terms of the object distribution. The point-spread functions based on such expressions can be used to assess the resolution. One measure of the sensitivity of the imaging process is the signal-to-noise ratio (SNR) of the measured variables. The statistical nature of the light source must be known in order to determine the SNR. The purpose of this chapter is to compare the resolution and sensitivity of photon-correlation imaging systems that make use of thermal light and two-photon light. We will henceforth refer to these two imaging modalities as classical and quantum photon-correlation imaging, or simply classical and quantum imaging, respectively. Clearly, light in other quantum states can also be used for imaging.
Recent advances in quantum optics have highlighted the critical role of spatial propagation in controlling the quantum coherence of light beams. However, the evolution of quantum coherence for light beams undergoing fundamental optical processes at dielectric interfaces remains unexplored. Furthermore, manipulating multiphoton correlations typically requires complex interactions that challenge few-photon level implementation. Here, we introduce a quantum van Cittert-Zernike theorem for light beams, describing how their coherence-polarization properties are influenced by reflection and refraction, as well as how these properties evolve upon subsequent propagation. Our work demonstrates that the quantum statistics of photonic systems can be controllably modified through the inherent polarization coupling arising from reflection and refraction at an interface, without relying on conventional light-matter interactions. Our approach reveals regimes where thermal light can exhibit sub-Poissonian statistics with fluctuations below the shot-noise level through post-selected measurements, and this statistical property can be tuned by the incident angle. Remarkably, this quantum statistical modification is governed by a scaling law linking beam collimation to far-field thermalization. Our work establishes a robust, decoherence-avoiding mechanism for quantum state control, advancing the fundamental understanding of coherence in quantum optics and opening new avenues for applications in quantum information and metrology.
Introduction In this chapter we will put the concept of coherence on a more mathematical basis. This will involve the formal definition of a number of functions that are used to describe the coherence properties of optical fields. These include the analytic signal, various correlation functions, and the degree of coherence for describing both temporal and spatial coherence. We shall see that the degree of temporal coherence is quantitatively related to the lineshape function and that the degree of spatial coherence between two points is determined by the size, intensity distribution, and location of an illuminating source. We will use the wave equation, and special solutions to the wave equation called Green's functions, to show how spatial coherence varies from point to point. The chapter will conclude with a discussion of how the intensity fluctuations of a source depend on its coherence properties, and we will examine a specific scheme, namely the Hanbury Brown–Twiss experiment, by means of which this relationship is studied. This discussion will involve a discussion of “photon statistics,” namely the time variation of the “detection” of photons from a source. In a quantum-mechanical context, square-law detectors respond to these quantized excitations of the optical field, which we call photons. In classical coherence theory it is advantageous to represent the real electromagnetic field by a complex quantity, both for its mathematical simplicity and because it serves to emphasize that coherence theory deals with phenomena that are sensitive to the “envelope” or average intensity of the field.