Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1705.02174 · Physical Review Letters

Long-Range Big Quantum-Data Transmission

Michael J. Zwerger, Alexander Pirker, Vedran Dunjko, Hans J. Briegel, Wolfgang Dür

Published Jan 19, 2018• 61 citations
arXivHTMLPDF

Abstract

We introduce an alternative type of quantum repeater for long-range quantum communication with improved scaling with the distance. We show that by employing hashing, a deterministic entanglement distillation protocol with one-way communication, one obtains a scalable scheme that allows one to reach arbitrary distances, with constant overhead in resources per repeater station, and ultrahigh rates. In practical terms, we show that, also with moderate resources of a few hundred qubits at each repeater station, one can reach intercontinental distances. At the same time, a measurement-based implementation allows one to tolerate high loss but also operational and memory errors of the order of several percent per qubit. This opens the way for long-distance communication of big quantum data.

DOI
10.1103/physrevlett.120.030503

Related papers

Protocols and prospects for building a quantum repeater

Peter van Loock

An overview will be given of various approaches to implementing a quantum repeater for quantum communication over large distances. This includes a discussion of systems and protocols that are experimentally feasible and thus realizable in the midterm in order to go beyond the current limit of a few hundred km given by direct quantum-state transmissions. At the same time, these schemes should be, in principle, scalable to arbitrary distances. In this context, the influence of various elements and strategies in a quantum repeater protocol on the final fidelities and rates shall be addressed: initial entanglement distribution, Bell measurements, multiplexing, postselection, quantum memories, and quantum error detection/correction. Solely on the hardware side, the differences in using just single quanta or instead employing many quanta for the flying (photons) and the stationary (atoms) qubits will be pointed out.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Oct 29, 2013•0 citations

Comparing one- and two-way quantum repeater architectures

Prateek Mantri, Kenneth Goodenough, Don Towsley

Quantum repeaters are an essential building block for realizing long-distance quantum communications. However, due to the fragile nature of quantum information, these repeaters suffer from loss and operational errors. Prior works have classified repeaters into three broad categories based on their use of probabilistic or near-deterministic methods to mitigate these errors. Besides differences in classical communication times, these approaches also vary in technological complexity, with near-deterministic methods requiring more advanced hardware. Recent increases in memory availability and advances in multiplexed entanglement generation motivate a fresh comparison of one-way and two-way repeater architectures. In this work, we present a two-way repeater protocol that combines multiplexing with application-aware distillation, designed for a setting where sufficient high-quality memory resources are available—reflecting architectural assumptions expected in large-scale network deployments. We introduce a recursive formulation to track the full probability distribution of Bell pairs in multiplexed two-way repeater architectures, enabling the performance analysis of multiplexed repeater schemes which use probabilistic n-to-k distillation. Using this framework, we compare the proposed two-way protocol with one-way schemes in parameter regimes previously believed to favour the latter, and find that the two-way architecture consistently outperforms one-way protocols while requiring lower technological and resource overheads. Quantum repeaters are a fundamental building block for long-distance quantum communication, yet they face challenges from loss and operational errors. The authors introduce a two-way repeater protocol leveraging multiplexing and application-aware distillation, demonstrating superior performance and reduced resource demands compared to one-way schemes, even in scenarios previously thought to favor the latter.

arXiv:2409.06152•Communications Physics•Jul 16, 2025•13 citations

Practical repeaters for ultralong-distance quantum communication

Scott E. Vinay, Pieter Kok

Quantum repeaters enable long-range quantum communication in the presence of attenuation. Here we propose a method to construct a robust quantum repeater network using only existing technology. We combine the ideas of brokered graph-state construction with double-heralded entanglement generation to form a system that is able to perform all parts of the procedure in a way that is highly tolerant to photon loss and imperfections in detectors. We show that when used in quantum key distribution this leads to secure kilohertz bit rates over intercontinental distances.

arXiv:1607.08140•Physical Review A•May 18, 2017•40 citations

Hybrid Quantum Repeater Using Bright Coherent Light

Peter van Loock, Thaddeus D. Ladd, Kaoru Sanaka +4 more

We describe a quantum repeater protocol for long-distance quantum communication. In this scheme, entanglement is created between qubits at intermediate stations of the channel by using a weak dispersive light-matter interaction and distributing the outgoing bright coherent-light pulses among the stations. Noisy entangled pairs of electronic spin are then prepared with high success probability via homodyne detection and postselection. The local gates for entanglement purification and swapping are deterministic and measurement-free, based upon the same coherent-light resources and weak interactions as for the initial entanglement distribution. Finally, the entanglement is stored in a nuclear-spin-based quantum memory. With our system, qubit-communication rates approaching 100 Hz over 1280 km with fidelities near 99% are possible for reasonable local gate errors.

arXiv:quant-ph/0510202•Physical Review Letters•Jun 19, 2006•296 citations

Quantum repeaters based on entanglement purification

Wolfgang Dür, Hans J. Briegel, J. I. Cirac +1 more

We study the use of entanglement purification for quantum communication over long distances. For distances much longer than the coherence length of a corresponding noisy quantum channel, the fidelity of transmission is usually so low that standard purification methods are not applicable. It is possible, however, to divide the channel into shorter segments that are purified separately and then connected by the method of entanglement swapping. This method can be much more efficient than schemes based on quantum error correction, as it makes explicit use of two-way classical communication. An important question is how the noise, introduced by imperfect local operations (that constitute the protocols of purification and the entanglement swapping), accumulates in such a compound channel, and how it can be kept below a certain noise level. To treat this problem, we first study the applicability and the efficiency of entanglement purification protocols in the situation of imperfect local operations. We then present a scheme that allows entanglement purification over arbitrary long channels and tolerates errors on the percent level. It requires a polynomial overhead in time, and an overhead in local resources that grows only logarithmically with the length of the channel.

arXiv:quant-ph/9808065•Physical Review A•Jan 1, 1999•818 citations

Role of memory errors in quantum repeaters

Ludwig Hartmann, Barbara Kraus, Hans J. Briegel +1 more

We investigate the influence of memory errors in the quantum repeater scheme for long-range quantum communication. We show that the communication distance is limited in standard operation mode due to memory errors resulting from unavoidable waiting times for classical signals. We show how to overcome these limitations by (i) improving local memory and (ii) introducing two operational modes of the quantum repeater. In both operational modes, the repeater is run blindly, i.e., without waiting for classical signals to arrive. In the first scheme, entanglement purification protocols based on one-way classical communication are used allowing to communicate over arbitrary distances. However, the error thresholds for noise in local control operations are very stringent. The second scheme makes use of entanglement purification protocols with two-way classical communication and inherits the favorable error thresholds of the repeater run in standard mode. One can increase the possible communication distance by an order of magnitude with reasonable overhead in physical resources. We outline the architecture of a quantum repeater that can possibly ensure intercontinental quantum communication.

arXiv:quant-ph/0610113•Physical Review A•Mar 8, 2007•85 citations
We introduce an alternative type of quantum repeater for long-range quantum communication with improved scaling with the distance. We show that by employing hashing, a deterministic entanglement distillation protocol with one-way communication, one obtains a scalable scheme that allows one to reach arbitrary distances, with constant overhead in resources per repeater station, and ultrahigh rates. In practical terms, we show that, also with moderate resources of a few hundred qubits at each repeater station, one can reach intercontinental distances. At the same time, a measurement-based implementation allows one to tolerate high loss but also operational and memory errors of the order of several percent per qubit. This opens the way for long-distance communication of big quantum data.
An overview will be given of various approaches to implementing a quantum repeater for quantum communication over large distances. This includes a discussion of systems and protocols that are experimentally feasible and thus realizable in the midterm in order to go beyond the current limit of a few hundred km given by direct quantum-state transmissions. At the same time, these schemes should be, in principle, scalable to arbitrary distances. In this context, the influence of various elements and strategies in a quantum repeater protocol on the final fidelities and rates shall be addressed: initial entanglement distribution, Bell measurements, multiplexing, postselection, quantum memories, and quantum error detection/correction. Solely on the hardware side, the differences in using just single quanta or instead employing many quanta for the flying (photons) and the stationary (atoms) qubits will be pointed out.
Quantum repeaters are an essential building block for realizing long-distance quantum communications. However, due to the fragile nature of quantum information, these repeaters suffer from loss and operational errors. Prior works have classified repeaters into three broad categories based on their use of probabilistic or near-deterministic methods to mitigate these errors. Besides differences in classical communication times, these approaches also vary in technological complexity, with near-deterministic methods requiring more advanced hardware. Recent increases in memory availability and advances in multiplexed entanglement generation motivate a fresh comparison of one-way and two-way repeater architectures. In this work, we present a two-way repeater protocol that combines multiplexing with application-aware distillation, designed for a setting where sufficient high-quality memory resources are available—reflecting architectural assumptions expected in large-scale network deployments. We introduce a recursive formulation to track the full probability distribution of Bell pairs in multiplexed two-way repeater architectures, enabling the performance analysis of multiplexed repeater schemes which use probabilistic n-to-k distillation. Using this framework, we compare the proposed two-way protocol with one-way schemes in parameter regimes previously believed to favour the latter, and find that the two-way architecture consistently outperforms one-way protocols while requiring lower technological and resource overheads. Quantum repeaters are a fundamental building block for long-distance quantum communication, yet they face challenges from loss and operational errors. The authors introduce a two-way repeater protocol leveraging multiplexing and application-aware distillation, demonstrating superior performance and reduced resource demands compared to one-way schemes, even in scenarios previously thought to favor the latter.
Quantum repeaters enable long-range quantum communication in the presence of attenuation. Here we propose a method to construct a robust quantum repeater network using only existing technology. We combine the ideas of brokered graph-state construction with double-heralded entanglement generation to form a system that is able to perform all parts of the procedure in a way that is highly tolerant to photon loss and imperfections in detectors. We show that when used in quantum key distribution this leads to secure kilohertz bit rates over intercontinental distances.
We describe a quantum repeater protocol for long-distance quantum communication. In this scheme, entanglement is created between qubits at intermediate stations of the channel by using a weak dispersive light-matter interaction and distributing the outgoing bright coherent-light pulses among the stations. Noisy entangled pairs of electronic spin are then prepared with high success probability via homodyne detection and postselection. The local gates for entanglement purification and swapping are deterministic and measurement-free, based upon the same coherent-light resources and weak interactions as for the initial entanglement distribution. Finally, the entanglement is stored in a nuclear-spin-based quantum memory. With our system, qubit-communication rates approaching 100 Hz over 1280 km with fidelities near 99% are possible for reasonable local gate errors.
We study the use of entanglement purification for quantum communication over long distances. For distances much longer than the coherence length of a corresponding noisy quantum channel, the fidelity of transmission is usually so low that standard purification methods are not applicable. It is possible, however, to divide the channel into shorter segments that are purified separately and then connected by the method of entanglement swapping. This method can be much more efficient than schemes based on quantum error correction, as it makes explicit use of two-way classical communication. An important question is how the noise, introduced by imperfect local operations (that constitute the protocols of purification and the entanglement swapping), accumulates in such a compound channel, and how it can be kept below a certain noise level. To treat this problem, we first study the applicability and the efficiency of entanglement purification protocols in the situation of imperfect local operations. We then present a scheme that allows entanglement purification over arbitrary long channels and tolerates errors on the percent level. It requires a polynomial overhead in time, and an overhead in local resources that grows only logarithmically with the length of the channel.
We investigate the influence of memory errors in the quantum repeater scheme for long-range quantum communication. We show that the communication distance is limited in standard operation mode due to memory errors resulting from unavoidable waiting times for classical signals. We show how to overcome these limitations by (i) improving local memory and (ii) introducing two operational modes of the quantum repeater. In both operational modes, the repeater is run blindly, i.e., without waiting for classical signals to arrive. In the first scheme, entanglement purification protocols based on one-way classical communication are used allowing to communicate over arbitrary distances. However, the error thresholds for noise in local control operations are very stringent. The second scheme makes use of entanglement purification protocols with two-way classical communication and inherits the favorable error thresholds of the repeater run in standard mode. One can increase the possible communication distance by an order of magnitude with reasonable overhead in physical resources. We outline the architecture of a quantum repeater that can possibly ensure intercontinental quantum communication.