Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1705.01169 · Optics Letters

Stabilized microwave-frequency transfer using optical phase sensing and actuation

Sascha Schediwy, David R. Gozzard, Simon Stobie, Jocias A. Malan, Keith Grainge

Published Apr 14, 2017• 45 citations
arXivHTMLPDF

Abstract

We present a stabilized microwave-frequency transfer technique that is based on optical phase sensing and optical phase actuation. This technique shares several attributes with optical-frequency transfer and, therefore, exhibits several advantages over other microwave-frequency transfer techniques. We demonstrated the stabilized transfer of an 8000 MHz microwave-frequency signal over a 166 km metropolitan optical fiber network, achieving a fractional frequency stability of 6.8×10−14 Hz/Hz at 1 s integration and 5.0×10−16 Hz/Hz at 1.6×104 s. This technique is being considered for use on the Square Kilometre Array SKA1-mid radio telescope.

DOI
10.1364/ol.42.001648

Related papers

Simple Stabilized Radio-Frequency Transfer With Optical Phase Actuation

David R. Gozzard, Sascha Schediwy, Benjamin Courtney-Barrer +2 more

We describe and experimentally evaluate a stabilized radio-frequency transfer technique that employs optical phase sensing and optical phase actuation. This technique is achieved by modifying existing optical frequency transfer equipment and also exhibits advantages over previous stabilized radiofrequency transfer techniques in terms of size and complexity. Acousto-optic modulators (AOMs) are used to modulate an optical carrier. Stabilization of frequency fluctuations in the link is achieved by steering the frequency of one of the AOMs. We demonstrate the stabilized transfer of a 160-MHz signal over a 166-km fiber optical link, achieving an Allan deviation of 9.7 × 10-12at 1 s of integration, and 6.4 × 10-15at 104s. This technique was considered for application to the Square Kilometre Array SKA1-low radio telescope.

arXiv:1705.06734•IEEE Photonics Technology Letters•Dec 20, 2017•15 citations

Stable transfer of an optical frequency standard via a 46 km optical fiber

Adam J. Mullavey, Bram J. J. Slagmolen, D. A. Shaddock +1 more

We present a technique for the stable transfer of an optical frequency reference over a kilometer-scale optical fiber link. This technique implements phase measurements and laser feedback to cancel out the phase fluctuations that are introduced to an optical frequency standard as it passes through the fiber. We also present results for a bench top experiment, developed for the Advanced LIGO lock acquisition system, where this technique is implemented to phase-lock two Nd:YAG lasers, through a 4.6 km optical fiber. The resulting differential optical frequency noise reaches a level as low as 0.5 mHz/ radical Hz for Fourier frequencies between 5 Hz and 20 Hz, which is equal to a fractional frequency stability of 1.7 x 10(-18)/ radical Hz.

Optics Express•Feb 26, 2010•10 citations

An ultra-stable microwave transfer technique for the ACES and future space missions

Naomi Altman, Sascha Schediwy, John J. McFerran +2 more

We present an actuation technique for suppressing uncorrelated noise between two optical frequencies to obtain ultra-stable microwave frequency dissemination over optical fibre. This technique will enable dual optical and microwave frequency transfer between the University of Western Australia and Yarragadee Satellite Laser Ranging station, which has application for the Atomic Clock Ensemble in Space (ACES) mission and other precision navigation and timing technologies. We build on the technique presented in [1], which demonstrates microwave transfer stability of 10−14 at 1s integration time by stabilising the group delay of an two correlated optical signals. A second actuator has been developed to suppress the remaining uncorrelated phase fluctuations between two optical frequencies by implementing optical-wavelength-scale action to vary the microwave phase. The actuator has been designed with the aid of a simulation that predicts actuation bandwidth and loss for a range of actuator parameters.

•May 1, 2014•0 citations

Photonic radio-frequency dissemination via optical fiber with high-phase stability

Xiaocheng Wang, Zhangweiyi Liu, Siwei Wang +3 more

We demonstrate a photonic radio-frequency transmission system via optical fiber. Optical radio-frequency signal is generated utilizing a Mach-Zehnder modulator based on double-side-band with carrier suppression modulation scheme. The phase error induced by optical fiber transmission is transferred to an intermediate frequency signal by the dual-heterodyne phase error transfer scheme, and then canceled by a phase locked loop. With precise phase compensation, a radio frequency with high-phase stability can be obtained at the remote end. We performed 20.07-GHz radio-frequency transfer over 100-km optical fiber, and achieved residual phase noise of -65 dBc/Hz at 1-Hz offset frequency, and the RMS timing jitter in the frequency range from 0.01 Hz to 1 MHz reaches 110 fs. The long-term frequency stability also achieves 8×10(-17) at 10,000 s averaging time.

Optics Letters•May 28, 2015•38 citations

Ultra-stable Optical Frequency Transfer via 609 km Communication Fiber Link

Xiang Zhang, Qi Zang, Xue Deng +5 more

SummaryIn this paper, we demonstrated coherent optical frequency transfer via 609 km communication fiber link. The phase noise per-unit-length of this fiber links at 1Hz and 10Hz are 175 rad2/(Hz*km) and 5 rad2/(Hz*km), respectively. After being compensated, optical frequency transfer achieves a fractional frequency instability of 2.7×10−15at an integration time of 1 s and 2.2×10−19at 16000 s in terms of Mod-ADEV.

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)•Apr 24, 2022•0 citations

High-Precision Frequency Transfer Based on Phase-Conjugation

郜智武, Hao Gao, Baodong Zhao +5 more

To address the issue of phase noise induced by environmental disturbances in optical fiber links, we propose a high-precision 100 MHz frequency transfer scheme based on a phase-conjugation technique. The system employs round-trip phase cancellation, eliminating the need for complex compensation architectures and effectively suppressing phase noise. The system is experimentally evaluated over a 40 km optical fiber link, achieving a frequency stability of 1.9 ×$\mathbf{1 0}^{\mathbf{- 1 4}} \boldsymbol{@} \mathbf{1 s}$and$\mathbf{5. 5} \times \mathbf{1 0}^{\boldsymbol{- 1 7}} \boldsymbol{@} \mathbf{1 0, 0 0 0} \mathbf{s}$. The scheme is applicable to time-frequency synchronization networks, such as distributed quantum sensing and deep-space observations.

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)•May 1, 2026•0 citations
We present a stabilized microwave-frequency transfer technique that is based on optical phase sensing and optical phase actuation. This technique shares several attributes with optical-frequency transfer and, therefore, exhibits several advantages over other microwave-frequency transfer techniques. We demonstrated the stabilized transfer of an 8000 MHz microwave-frequency signal over a 166 km metropolitan optical fiber network, achieving a fractional frequency stability of 6.8×10−14 Hz/Hz at 1 s integration and 5.0×10−16 Hz/Hz at 1.6×104 s. This technique is being considered for use on the Square Kilometre Array SKA1-mid radio telescope.
We describe and experimentally evaluate a stabilized radio-frequency transfer technique that employs optical phase sensing and optical phase actuation. This technique is achieved by modifying existing optical frequency transfer equipment and also exhibits advantages over previous stabilized radiofrequency transfer techniques in terms of size and complexity. Acousto-optic modulators (AOMs) are used to modulate an optical carrier. Stabilization of frequency fluctuations in the link is achieved by steering the frequency of one of the AOMs. We demonstrate the stabilized transfer of a 160-MHz signal over a 166-km fiber optical link, achieving an Allan deviation of 9.7 × 10-12at 1 s of integration, and 6.4 × 10-15at 104s. This technique was considered for application to the Square Kilometre Array SKA1-low radio telescope.
We present a technique for the stable transfer of an optical frequency reference over a kilometer-scale optical fiber link. This technique implements phase measurements and laser feedback to cancel out the phase fluctuations that are introduced to an optical frequency standard as it passes through the fiber. We also present results for a bench top experiment, developed for the Advanced LIGO lock acquisition system, where this technique is implemented to phase-lock two Nd:YAG lasers, through a 4.6 km optical fiber. The resulting differential optical frequency noise reaches a level as low as 0.5 mHz/ radical Hz for Fourier frequencies between 5 Hz and 20 Hz, which is equal to a fractional frequency stability of 1.7 x 10(-18)/ radical Hz.
We present an actuation technique for suppressing uncorrelated noise between two optical frequencies to obtain ultra-stable microwave frequency dissemination over optical fibre. This technique will enable dual optical and microwave frequency transfer between the University of Western Australia and Yarragadee Satellite Laser Ranging station, which has application for the Atomic Clock Ensemble in Space (ACES) mission and other precision navigation and timing technologies. We build on the technique presented in [1], which demonstrates microwave transfer stability of 10−14 at 1s integration time by stabilising the group delay of an two correlated optical signals. A second actuator has been developed to suppress the remaining uncorrelated phase fluctuations between two optical frequencies by implementing optical-wavelength-scale action to vary the microwave phase. The actuator has been designed with the aid of a simulation that predicts actuation bandwidth and loss for a range of actuator parameters.
We demonstrate a photonic radio-frequency transmission system via optical fiber. Optical radio-frequency signal is generated utilizing a Mach-Zehnder modulator based on double-side-band with carrier suppression modulation scheme. The phase error induced by optical fiber transmission is transferred to an intermediate frequency signal by the dual-heterodyne phase error transfer scheme, and then canceled by a phase locked loop. With precise phase compensation, a radio frequency with high-phase stability can be obtained at the remote end. We performed 20.07-GHz radio-frequency transfer over 100-km optical fiber, and achieved residual phase noise of -65 dBc/Hz at 1-Hz offset frequency, and the RMS timing jitter in the frequency range from 0.01 Hz to 1 MHz reaches 110 fs. The long-term frequency stability also achieves 8×10(-17) at 10,000 s averaging time.
To address the issue of phase noise induced by environmental disturbances in optical fiber links, we propose a high-precision 100 MHz frequency transfer scheme based on a phase-conjugation technique. The system employs round-trip phase cancellation, eliminating the need for complex compensation architectures and effectively suppressing phase noise. The system is experimentally evaluated over a 40 km optical fiber link, achieving a frequency stability of 1.9 ×10−14@1s\mathbf{1 0}^{\mathbf{- 1 4}} \boldsymbol{@} \mathbf{1 s}10−14@1sand5.5×10−17@10,000s\mathbf{5. 5} \times \mathbf{1 0}^{\boldsymbol{- 1 7}} \boldsymbol{@} \mathbf{1 0, 0 0 0} \mathbf{s}5.5×10−17@10,000s. The scheme is applicable to time-frequency synchronization networks, such as distributed quantum sensing and deep-space observations.