Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1704.06312 · Physical Review Letters

High-Resolution Valley Spectroscopy of Si Quantum Dots

Xiao Mi, Csaba G. Péterfalvi, Guido Burkard, J. R. Petta

Published Oct 24, 2017• 84 citations
arXivHTMLPDF

Abstract

We study an accumulation mode Si/SiGe double quantum dot (DQD) containing a single electron that is dipole coupled to microwave photons in a superconducting cavity. Measurements of the cavity transmission reveal dispersive features due to the DQD valley states in Si. The occupation of the valley states can be increased by raising the temperature or applying a finite source-drain bias across the DQD, resulting in an increased signal. Using the cavity input-output theory and a four-level model of the DQD, it is possible to efficiently extract valley splittings and the inter- and intravalley tunnel couplings.

DOI
10.1103/physrevlett.119.176803

Related papers

Dispersive readout of valley splittings in cavity-coupled silicon quantum dots

Guido Burkard, J. R. Petta

The band structure of bulk silicon has a sixfold valley degeneracy. Strain in the Si/SiGe quantum well system partially lifts the valley degeneracy, but the materials factors that set the splitting of the two lowest lying valleys are still under intense investigation. Using cavity input-output theory, we propose a method for accurately determining the valley splitting in Si/SiGe double quantum dots embedded in a superconducting microwave resonator. We show that low lying valley states in the double quantum dot energy level spectrum lead to readily observable features in the cavity transmission. These features generate a ``fingerprint'' of the microscopic energy level structure of a semiconductor double quantum dot, providing useful information on valley splittings and intervalley coupling rates.

arXiv:1607.08801•Physical review. B./Physical review. B•Nov 14, 2016•57 citations

Theory of valley-resolved spectroscopy of a Si triple quantum dot coupled to a microwave resonator

Maximilian Rimbach-Russ, Csaba G. Péterfalvi, Guido Burkard

We theoretically study a silicon triple quantum dot (TQD) system coupled to a superconducting microwave resonator. The response signal of an injected probe signal can be used to extract information about the level structure by measuring the transmission and phase shift of the output field. This information can further be used to gain knowledge about the valley splittings and valley phases in the individual dots. Since relevant valley states are typically split by several [Formula: see text], a finite temperature or an applied external bias voltage is required to populate energetically excited states. The theoretical methods in this paper include a capacitor model to fit experimental charging energies, an extended Hubbard model to describe the tunneling dynamics, a rate equation model to find the occupation probabilities, and an input-output model to determine the response signal of the resonator.

arXiv:1907.08092•Journal of Physics Condensed Matter•Dec 12, 2019•13 citations

Circuit quantum electrodynamics architecture for gate-defined quantum dots in silicon

X. Mi, J. V. Cady, D. M. Zajac +3 more

We demonstrate a hybrid device architecture where the charge states in a double quantum dot (DQD) formed in a Si/SiGe heterostructure are read out using an on-chip superconducting microwave cavity. A quality factor Q = 5400 is achieved by selectively etching away regions of the quantum well and by reducing photon losses through low-pass filtering of the gate bias lines. Homodyne measurements of the cavity transmission reveal DQD charge stability diagrams and a charge-cavity coupling rate gc/2π= 23 MHz. These measurements indicate that electrons trapped in a Si DQD can be effectively coupled to microwave photons, potentially enabling coherent electron-photon interactions in silicon.

arXiv:1610.05571•Applied Physics Letters•Jan 23, 2017•94 citations

Interplay of Pauli blockade with electron-photon coupling in quantum dots

Florian Ginzel, Guido Burkard

Both quantum transport measurements in the Pauli blockade regime and microwave cavity transmission measurements are important tools for spin-qubit readout and characterization. Based on a generalized input-output theory we derive a theoretical framework to investigate how a double quantum dot (DQD) in a transport setup interacts with a coupled microwave resonator while the current through the DQD is rectified by Pauli blockade. We show that the output field of the resonator can be used to infer the leakage current and thus obtain insight into the blockade mechanisms. In the case of a silicon DQD, we show how the valley quasidegeneracy can impose limitations on this scheme. We also demonstrate that a large number of unknown DQD parameters including (but not limited to) the valley splitting can be estimated from the resonator response simultaneous to a transport experiment, providing more detailed knowledge about the microscopic environment of the DQD. Furthermore, we describe and quantify a back action of the resonator photons on the steady-state leakage current.

arXiv:2210.02982•Physical review. B./Physical review. B•Mar 13, 2023•0 citations

Singlet-triplet oscillations in multivalley Si double quantum dots

Łukasz Cywiński, Mats Volmer, Tom Struck +2 more

Charge separation from the $(4,0)$ to the $(3,1)$ state in a Si/SiGe double quantum dot is commonly used for initialization of spin qubits and Pauli-spin-blockade readout. It was used in recent experiments involving creation of the $(3,1)$ singlet, and subsequent shuttling of one of the electrons. We present a theoretical description of the process of charge separation and singlet-triplet mixing, arriving at expressions for the singlet return probability that take into account experimentally observed finite probabilities of the creation of singlets with various patterns of valley occupations. In our analysis we focus on magnetic fields for which the electron spin Zeeman splitting is close to the valley splitting in one of the dots, when the spin-valley coupling causes a strong renormalization of the frequency of oscillations of singlet return probability. The latter effect has been recently used to perform valley splitting mapping by shuttling of one quantum dot to various locations with respect to the other. We give a detailed description of singlet-triplet dynamics near these spin-valley resonances and compare the results of calculations with measurements on double quantum dots in two distinct Si/SiGe heterostructures. Comparison of theory with experiments in which the presence of a few valley occupation patterns is visible, gives insight into the valley dependence of $g$-factors in these structures, providing support for a recently proposed theoretical model of this dependence. We also discuss how dephasing of singlet return probability oscillations near the spin-valley resonances is affected by valley splitting fluctuations caused by electric field noise.

cond-mat.mes-hallCross-listedarXiv:2604.24689•Apr 28, 2026

Single-electron double quantum dot dipole-coupled to a single photonic mode

J. Basset, David-Dominik Jarausch, Anna Stockklauser +6 more

We have realized a hybrid solid-state quantum device in which a single-electron semiconductor double quantum dot is dipole coupled to a superconducting microwave frequency transmission line resonator. The dipolar interaction between the two entities manifests itself via dispersive and dissipative effects observed as frequency shifts and linewidth broadenings of the photonic mode respectively. A Jaynes-Cummings Hamiltonian master equation calculation is used to model the combined system response and allows for determining both the coherence properties of the double quantum dot and its interdot tunnel coupling with high accuracy. The value and uncertainty of the tunnel coupling extracted from the microwave read-out technique are compared to a standard quantum point contact charge detection analysis. The two techniques are found to be consistent with a superior precision for the microwave experiment when tunneling rates approach the resonator eigenfrequency. Decoherence properties of the double dot are further investigated as a function of the number of electrons inside the dots. They are found to be similar in the single-electron and many-electron regimes suggesting that the density of the confinement energy spectrum plays a minor role in the decoherence rate of the system under investigation.

arXiv:1304.5141•Physical Review B•Sep 30, 2013•70 citations
We study an accumulation mode Si/SiGe double quantum dot (DQD) containing a single electron that is dipole coupled to microwave photons in a superconducting cavity. Measurements of the cavity transmission reveal dispersive features due to the DQD valley states in Si. The occupation of the valley states can be increased by raising the temperature or applying a finite source-drain bias across the DQD, resulting in an increased signal. Using the cavity input-output theory and a four-level model of the DQD, it is possible to efficiently extract valley splittings and the inter- and intravalley tunnel couplings.
The band structure of bulk silicon has a sixfold valley degeneracy. Strain in the Si/SiGe quantum well system partially lifts the valley degeneracy, but the materials factors that set the splitting of the two lowest lying valleys are still under intense investigation. Using cavity input-output theory, we propose a method for accurately determining the valley splitting in Si/SiGe double quantum dots embedded in a superconducting microwave resonator. We show that low lying valley states in the double quantum dot energy level spectrum lead to readily observable features in the cavity transmission. These features generate a ``fingerprint'' of the microscopic energy level structure of a semiconductor double quantum dot, providing useful information on valley splittings and intervalley coupling rates.
We theoretically study a silicon triple quantum dot (TQD) system coupled to a superconducting microwave resonator. The response signal of an injected probe signal can be used to extract information about the level structure by measuring the transmission and phase shift of the output field. This information can further be used to gain knowledge about the valley splittings and valley phases in the individual dots. Since relevant valley states are typically split by several [Formula: see text], a finite temperature or an applied external bias voltage is required to populate energetically excited states. The theoretical methods in this paper include a capacitor model to fit experimental charging energies, an extended Hubbard model to describe the tunneling dynamics, a rate equation model to find the occupation probabilities, and an input-output model to determine the response signal of the resonator.
We demonstrate a hybrid device architecture where the charge states in a double quantum dot (DQD) formed in a Si/SiGe heterostructure are read out using an on-chip superconducting microwave cavity. A quality factor Q = 5400 is achieved by selectively etching away regions of the quantum well and by reducing photon losses through low-pass filtering of the gate bias lines. Homodyne measurements of the cavity transmission reveal DQD charge stability diagrams and a charge-cavity coupling rate gc/2π= 23 MHz. These measurements indicate that electrons trapped in a Si DQD can be effectively coupled to microwave photons, potentially enabling coherent electron-photon interactions in silicon.
Both quantum transport measurements in the Pauli blockade regime and microwave cavity transmission measurements are important tools for spin-qubit readout and characterization. Based on a generalized input-output theory we derive a theoretical framework to investigate how a double quantum dot (DQD) in a transport setup interacts with a coupled microwave resonator while the current through the DQD is rectified by Pauli blockade. We show that the output field of the resonator can be used to infer the leakage current and thus obtain insight into the blockade mechanisms. In the case of a silicon DQD, we show how the valley quasidegeneracy can impose limitations on this scheme. We also demonstrate that a large number of unknown DQD parameters including (but not limited to) the valley splitting can be estimated from the resonator response simultaneous to a transport experiment, providing more detailed knowledge about the microscopic environment of the DQD. Furthermore, we describe and quantify a back action of the resonator photons on the steady-state leakage current.
Charge separation from the (4,0)(4,0)(4,0) to the (3,1)(3,1)(3,1) state in a Si/SiGe double quantum dot is commonly used for initialization of spin qubits and Pauli-spin-blockade readout. It was used in recent experiments involving creation of the (3,1)(3,1)(3,1) singlet, and subsequent shuttling of one of the electrons. We present a theoretical description of the process of charge separation and singlet-triplet mixing, arriving at expressions for the singlet return probability that take into account experimentally observed finite probabilities of the creation of singlets with various patterns of valley occupations. In our analysis we focus on magnetic fields for which the electron spin Zeeman splitting is close to the valley splitting in one of the dots, when the spin-valley coupling causes a strong renormalization of the frequency of oscillations of singlet return probability. The latter effect has been recently used to perform valley splitting mapping by shuttling of one quantum dot to various locations with respect to the other. We give a detailed description of singlet-triplet dynamics near these spin-valley resonances and compare the results of calculations with measurements on double quantum dots in two distinct Si/SiGe heterostructures. Comparison of theory with experiments in which the presence of a few valley occupation patterns is visible, gives insight into the valley dependence of ggg-factors in these structures, providing support for a recently proposed theoretical model of this dependence. We also discuss how dephasing of singlet return probability oscillations near the spin-valley resonances is affected by valley splitting fluctuations caused by electric field noise.
We have realized a hybrid solid-state quantum device in which a single-electron semiconductor double quantum dot is dipole coupled to a superconducting microwave frequency transmission line resonator. The dipolar interaction between the two entities manifests itself via dispersive and dissipative effects observed as frequency shifts and linewidth broadenings of the photonic mode respectively. A Jaynes-Cummings Hamiltonian master equation calculation is used to model the combined system response and allows for determining both the coherence properties of the double quantum dot and its interdot tunnel coupling with high accuracy. The value and uncertainty of the tunnel coupling extracted from the microwave read-out technique are compared to a standard quantum point contact charge detection analysis. The two techniques are found to be consistent with a superior precision for the microwave experiment when tunneling rates approach the resonator eigenfrequency. Decoherence properties of the double dot are further investigated as a function of the number of electrons inside the dots. They are found to be similar in the single-electron and many-electron regimes suggesting that the density of the confinement energy spectrum plays a minor role in the decoherence rate of the system under investigation.