Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1703.06470 · Review of Scientific Instruments

Reconfigurable re-entrant cavity for wireless coupling to an electro-optomechanical device

Tim Menke, Peter S. Burns, Andrew P. Higginbotham, N. S. Kampel, Robert W. Peterson, Katarina Cicak, Raymond W. Simmonds, Cindy A. Regal, Konrad W. Lehnert

Published Sep 1, 2017• 9 citations
arXivHTMLPDF

Abstract

An electro-optomechanical device capable of microwave-to-optics conversion has recently been demonstrated, with the vision of enabling optical networks of superconducting qubits. Here we present an improved converter design that uses a three-dimensional microwave cavity for coupling between the microwave transmission line and an integrated LC resonator on the converter chip. The new design simplifies the optical assembly and decouples it from the microwave part of the setup. Experimental demonstrations show that the modular device assembly allows us to flexibly tune the microwave coupling to the converter chip while maintaining small loss. We also find that electromechanical experiments are not impacted by the additional microwave cavity. Our design is compatible with a high-finesse optical cavity and will improve optical performance.

DOI
10.1063/1.5000973

Related papers

On-chip microwave-to-optical quantum coherent converter based on a superconducting resonator coupled to an electro-optic microresonator

Clément Javerzac‐Galy, Kirill Plekhanov, Nathan Bernier +3 more

We propose a device architecture capable of direct quantum coherent electro-optical conversion of microwave-to-optical photons. The hybrid system consists of a planar superconducting microwave circuit coupled to an integrated whispering-gallery-mode microresonator made from an electro-optical material. We show that by exploiting the large vacuum electric field of the planar microwave resonator, electro-optical (vacuum) coupling strengths ${g}_{0}$ as large as $\ensuremath{\sim}2\ensuremath{\pi}O(10\ensuremath{-}100)$ kHz are achievable with currently available technology---a more than 3 orders of magnitude improvement over prior designs and realizations. Operating at millikelvin temperatures, such a converter would enable high-efficiency conversion of microwave-to-optical photons. We analyze the added noise and show that maximum quantum coherent conversion efficiency is achieved for a multiphoton cooperativity of unity which can be reached with optical power as low as $O(1)$ mW.

arXiv:1512.06442•Physical Review A•Nov 9, 2016•105 citations

Efficient quantum microwave-to-optical conversion using electro-optic nanophotonic coupled resonators

Mohammad Soltani, Mian Zhang, Colm A. Ryan +3 more

We propose a low-noise, triply resonant, electro-optic (EO) scheme for quantum microwave-to-optical conversion based on coupled nanophotonics resonators integrated with a superconducting qubit. Our optical system features a split resonance---a doublet---with a tunable frequency splitting that matches the microwave resonance frequency of the superconducting qubit. This is in contrast to conventional approaches, where large optical resonators with free-spectral range comparable to the qubit microwave frequency are used. In our system, EO mixing between the optical pump coupled into the low-frequency doublet mode and a resonance microwave photon results in an up-converted optical photon on resonance with high-frequency doublet mode. Importantly, the down-conversion process, which is the source of noise, is suppressed in our scheme as the coupled-resonator system does not support modes at that frequency. Our device has at least an order of magnitude smaller footprint than conventional devices, resulting in large overlap between optical and microwave fields and a large photon conversion rate ($g/2\ensuremath{\pi}$) in the range of $\ensuremath{\sim}5$--15 kHz. Owing to a large $g$ factor and doubly resonant nature of our device, microwave-to-optical frequency conversion can be achieved with optical pump powers in the range of tens of microwatts, even with moderate values for optical $\mathit{Q}$ ($\ensuremath{\sim}{10}^{6}$) and microwave $Q$ ($\ensuremath{\sim}{10}^{4}$). The performance metrics of our device, with substantial improvement over the previous EO-based approaches, promise a scalable quantum microwave-to-optical conversion and networking of superconducting processors via optical fiber communication.

arXiv:1711.00346•Physical Review A•Oct 5, 2017•80 citations

Co-localized microwave-to-optical transduction via electrostatic actuation

Pei-Qin Chen, Li-Ping Zeng, Yifei Zhang +8 more

Microwave-to-optical transduction bridges microwave photons used in superconducting quantum circuits and optical photons suitable for long-distance transmission, making it a key enabling technology for distributed quantum networks. Scalable implementation, however, requires device architectures that combine practical conversion performance with low fabrication complexity, whereas many existing approaches rely on heterogeneous material integration. Here, we demonstrate a co-localized microwave-to-optical transducer that integrates electrostatic excitation, mechanical mediation, and optical readout within a single optomechanical cavity. The electrostatic actuator is implemented using only a single metallization layer, reducing device complexity and avoiding the need for separate electromechanical and optomechanical resonators. This compact, fabrication-friendly architecture offers a practical route toward scalable integrated microwave photonics and future chip-scale microwave-to-optical interfaces for hybrid quantum systems.

Optics Letters•Sep 16, 2026•0 citations

Integrating planar circuits with superconducting 3D microwave cavities using tunable low-loss couplers

Ziyi Zhao, Eva Gurra, Eric I. Rosenthal +3 more

We design and test a low-loss interface between superconducting three-dimensional microwave cavities and two-dimensional circuits, where the coupling rate is highly tunable. This interface seamlessly integrates a loop antenna and a Josephson junction-based coupling element. We demonstrate that the loss added by connecting this interface to the cavity is 1.28 kHz, corresponding to an inverse quality factor of 1/(4.5×106). Furthermore, we show that the cavity's external coupling rate to a 50 Ω transmission line can be tuned from negligibly small to over 3 orders of magnitude larger than its internal loss rate in a characteristic time of 3.2 ns. This switching speed does not impose additional limits on the coupling rate because it is much faster than the coupling rate. Moreover, the coupler can be controlled by low frequency signals to avoid interference with microwave signals near the cavity or qubit frequencies. Finally, the coupling element introduces a 0.04 Hz/photon self-Kerr nonlinearity to the cavity, remaining linear in high photon number operations.

arXiv:2304.06162•Applied Physics Letters•Jul 3, 2023•2 citations

Microwave-to-optical conversion with a gallium phosphide photonic crystal cavity

Simon Hönl, Youri Popoff, Daniele Caimi +3 more

Abstract Electrically actuated optomechanical resonators provide a route to quantum-coherent, bidirectional conversion of microwave and optical photons. Such devices could enable optical interconnection of quantum computers based on qubits operating at microwave frequencies. Here we present a platform for microwave-to-optical conversion comprising a photonic crystal cavity made of single-crystal, piezoelectric gallium phosphide integrated on pre-fabricated niobium circuits on an intrinsic silicon substrate. The devices exploit spatially extended, sideband-resolved mechanical breathing modes at ~3.2 GHz, with vacuum optomechanical coupling rates of up to g0/2π ≈ 300 kHz. The mechanical modes are driven by integrated microwave electrodes via the inverse piezoelectric effect. We estimate that the system could achieve an electromechanical coupling rate to a superconducting transmon qubit of ~200 kHz. Our work represents a decisive step towards integration of piezoelectro-optomechanical interfaces with superconducting quantum processors.

arXiv:2105.13242•Nature Communications•Apr 19, 2022•70 citations

Mechanically mediated optical-microwave quantum state transfer by feedback

Max P. Foreman, Jesse J. Slim, Warwick P. Bowen

State transfer between light and microwaves is a key challenge in quantum networks. Promising transducers use a mechanical intermediary that couples to both fields via radiation pressure. Such electro-optomechanical devices have achieved high efficiencies, yet require resolved-sideband cavities, and generally compromise in scalability and noise performance. Here, we relax this constraint by extending the protocol of Navarathna et al. that transfers optical quantum information onto a mechanical resonator using a broadband, sideband-unresolved cavity and feedback. Combining this with parametric mechanical-to-microwave conversion, we show that continuous optical-to-microwave quantum state transfer is possible using measurement-based feedback, while all-optical coherent feedback enables bidirectional transfer. To assess the transfer, we introduce the quantum transfer witness $\mathcal{W}_T$, which -- though similar to the input-referred added noise -- also identifies whether a channel is capable of both preserving Gaussian entanglement and outperforming classical transduction schemes. Finally, we show that quantum-compatible noise performance is within reach of current experimental capabilities. Our results unlock a new design space for electro-optomechanical transducers and strengthens their candidacy as scalable quantum links between distant nodes.

quant-pharXiv:2512.05457•Dec 8, 2025•0 citations
An electro-optomechanical device capable of microwave-to-optics conversion has recently been demonstrated, with the vision of enabling optical networks of superconducting qubits. Here we present an improved converter design that uses a three-dimensional microwave cavity for coupling between the microwave transmission line and an integrated LC resonator on the converter chip. The new design simplifies the optical assembly and decouples it from the microwave part of the setup. Experimental demonstrations show that the modular device assembly allows us to flexibly tune the microwave coupling to the converter chip while maintaining small loss. We also find that electromechanical experiments are not impacted by the additional microwave cavity. Our design is compatible with a high-finesse optical cavity and will improve optical performance.
We propose a device architecture capable of direct quantum coherent electro-optical conversion of microwave-to-optical photons. The hybrid system consists of a planar superconducting microwave circuit coupled to an integrated whispering-gallery-mode microresonator made from an electro-optical material. We show that by exploiting the large vacuum electric field of the planar microwave resonator, electro-optical (vacuum) coupling strengths g0{g}_{0}g0​ as large as $\ensuremath{\sim}2\ensuremath{\pi}O(10\ensuremath{-}100)$ kHz are achievable with currently available technology---a more than 3 orders of magnitude improvement over prior designs and realizations. Operating at millikelvin temperatures, such a converter would enable high-efficiency conversion of microwave-to-optical photons. We analyze the added noise and show that maximum quantum coherent conversion efficiency is achieved for a multiphoton cooperativity of unity which can be reached with optical power as low as O(1)O(1)O(1) mW.
We propose a low-noise, triply resonant, electro-optic (EO) scheme for quantum microwave-to-optical conversion based on coupled nanophotonics resonators integrated with a superconducting qubit. Our optical system features a split resonance---a doublet---with a tunable frequency splitting that matches the microwave resonance frequency of the superconducting qubit. This is in contrast to conventional approaches, where large optical resonators with free-spectral range comparable to the qubit microwave frequency are used. In our system, EO mixing between the optical pump coupled into the low-frequency doublet mode and a resonance microwave photon results in an up-converted optical photon on resonance with high-frequency doublet mode. Importantly, the down-conversion process, which is the source of noise, is suppressed in our scheme as the coupled-resonator system does not support modes at that frequency. Our device has at least an order of magnitude smaller footprint than conventional devices, resulting in large overlap between optical and microwave fields and a large photon conversion rate ($g/2\ensuremath{\pi}$) in the range of $\ensuremath{\sim}5$--15 kHz. Owing to a large ggg factor and doubly resonant nature of our device, microwave-to-optical frequency conversion can be achieved with optical pump powers in the range of tens of microwatts, even with moderate values for optical Q\mathit{Q}Q ($\ensuremath{\sim}{10}^{6}$) and microwave QQQ ($\ensuremath{\sim}{10}^{4}$). The performance metrics of our device, with substantial improvement over the previous EO-based approaches, promise a scalable quantum microwave-to-optical conversion and networking of superconducting processors via optical fiber communication.
Microwave-to-optical transduction bridges microwave photons used in superconducting quantum circuits and optical photons suitable for long-distance transmission, making it a key enabling technology for distributed quantum networks. Scalable implementation, however, requires device architectures that combine practical conversion performance with low fabrication complexity, whereas many existing approaches rely on heterogeneous material integration. Here, we demonstrate a co-localized microwave-to-optical transducer that integrates electrostatic excitation, mechanical mediation, and optical readout within a single optomechanical cavity. The electrostatic actuator is implemented using only a single metallization layer, reducing device complexity and avoiding the need for separate electromechanical and optomechanical resonators. This compact, fabrication-friendly architecture offers a practical route toward scalable integrated microwave photonics and future chip-scale microwave-to-optical interfaces for hybrid quantum systems.
We design and test a low-loss interface between superconducting three-dimensional microwave cavities and two-dimensional circuits, where the coupling rate is highly tunable. This interface seamlessly integrates a loop antenna and a Josephson junction-based coupling element. We demonstrate that the loss added by connecting this interface to the cavity is 1.28 kHz, corresponding to an inverse quality factor of 1/(4.5×106). Furthermore, we show that the cavity's external coupling rate to a 50 Ω transmission line can be tuned from negligibly small to over 3 orders of magnitude larger than its internal loss rate in a characteristic time of 3.2 ns. This switching speed does not impose additional limits on the coupling rate because it is much faster than the coupling rate. Moreover, the coupler can be controlled by low frequency signals to avoid interference with microwave signals near the cavity or qubit frequencies. Finally, the coupling element introduces a 0.04 Hz/photon self-Kerr nonlinearity to the cavity, remaining linear in high photon number operations.
Abstract Electrically actuated optomechanical resonators provide a route to quantum-coherent, bidirectional conversion of microwave and optical photons. Such devices could enable optical interconnection of quantum computers based on qubits operating at microwave frequencies. Here we present a platform for microwave-to-optical conversion comprising a photonic crystal cavity made of single-crystal, piezoelectric gallium phosphide integrated on pre-fabricated niobium circuits on an intrinsic silicon substrate. The devices exploit spatially extended, sideband-resolved mechanical breathing modes at ~3.2 GHz, with vacuum optomechanical coupling rates of up to g0/2π ≈ 300 kHz. The mechanical modes are driven by integrated microwave electrodes via the inverse piezoelectric effect. We estimate that the system could achieve an electromechanical coupling rate to a superconducting transmon qubit of ~200 kHz. Our work represents a decisive step towards integration of piezoelectro-optomechanical interfaces with superconducting quantum processors.
State transfer between light and microwaves is a key challenge in quantum networks. Promising transducers use a mechanical intermediary that couples to both fields via radiation pressure. Such electro-optomechanical devices have achieved high efficiencies, yet require resolved-sideband cavities, and generally compromise in scalability and noise performance. Here, we relax this constraint by extending the protocol of Navarathna et al. that transfers optical quantum information onto a mechanical resonator using a broadband, sideband-unresolved cavity and feedback. Combining this with parametric mechanical-to-microwave conversion, we show that continuous optical-to-microwave quantum state transfer is possible using measurement-based feedback, while all-optical coherent feedback enables bidirectional transfer. To assess the transfer, we introduce the quantum transfer witness WT\mathcal{W}_TWT​, which -- though similar to the input-referred added noise -- also identifies whether a channel is capable of both preserving Gaussian entanglement and outperforming classical transduction schemes. Finally, we show that quantum-compatible noise performance is within reach of current experimental capabilities. Our results unlock a new design space for electro-optomechanical transducers and strengthens their candidacy as scalable quantum links between distant nodes.