Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1703.02430 · Physical review. E

Surprising convergence of the Monte Carlo renormalization group for the three-dimensional Ising model

Dorit Ron, Achi Brandt, Robert H. Swendsen

Published May 16, 2017• 21 citations
arXivHTMLPDF

Abstract

We present a surprisingly simple approach to high-accuracy calculations of the critical properties of the three-dimensional Ising model. The method uses a modified block-spin transformation with a tunable parameter to improve convergence in the Monte Carlo renormalization group. The block-spin parameter must be tuned differently for different exponents to produce optimal convergence.

DOI
10.1103/physreve.95.053305

Related papers

Monte Carlo renormalization-group calculation for the d=3 Ising model using a modified transformation

Dorit Ron, Achi Brandt, Robert H. Swendsen

We present a simple approach to high-accuracy calculations of critical properties for the three-dimensional Ising model, without prior knowledge of the critical temperature. The iterative method uses a modified block-spin transformation with a tunable parameter to improve convergence in the Monte Carlo renormalization group trajectory. We found experimentally that the iterative method enables the calculation of the critical temperature simultaneously with a critical exponent.

arXiv:2011.05567•Physical review. E•Aug 26, 2021•4 citations

Monte Carlo calculation of renormalized coupling parameters. II. d=3 Ising model

Robert H. Swendsen

The majority-rule, block-spin, renormalization-group transformation for the $d=3$ Ising model is studied, with the use of a recently developed technique for calculating renormalized coupling parameters from a single Monte Carlo simulation. Renormalization-group trajectories and the approximate fixed point are calculated. Improvements in the convergence of the Monte Carlo renormalization-group calculations of critical exponents are discussed.

Physical review. B, Condensed matter•Oct 1, 1984•29 citations

Monte Carlo Renormalization of the 3D Ising Model: Analyticity and Convergence

Henk W. J. Blöte, Jouke R. Heringa, A. Hoogland +2 more

We review the assumptions on which the Monte Carlo renormalization technique is based, in particular, the analyticity of the block-spin transformations. On this basis, we select an optimized Kadanoff blocking rule in combination with the simulation of a $d\phantom{\rule{0ex}{0ex}}=\phantom{\rule{0ex}{0ex}}3$ Ising model with reduced corrections to scaling. This is achieved by including interactions with second and third neighbors. As a consequence of the improved transformation, this Monte Carlo renormalization method yields a fast convergence and a high accuracy. The results for the critical exponents are ${y}_{H}\phantom{\rule{0ex}{0ex}}=\phantom{\rule{0ex}{0ex}}2.481(1)$ and ${y}_{T}\phantom{\rule{0ex}{0ex}}=\phantom{\rule{0ex}{0ex}}1.585(3)$.

arXiv:cond-mat/9602020•Physical Review Letters•Apr 8, 1996•47 citations

A Simple Method of Monte Carlo Renormalization Group

Macoto Kikuchi, Yutaka Okabe

We propose a simple method of Monte Carlo renormalization group which is based on the transformation properties of the thermodynamic quantities under the block-spin transformation. We apply the method to the three-dimensional Ising model.

Progress of Theoretical Physics•Jan 1, 1986•14 citations

Monte Carlo renormalization-group calculations of critical behavior in the simple-cubic Ising model

Godfrey Stuart Pawley, Robert H. Swendsen, D. J. Wallace +1 more

The Monte Carlo renormalization group is applied to the three-dimensional Ising model on simple cubic lattices with ${8}^{3}$, ${16}^{3}$, ${32}^{3}$, and ${64}^{3}$ sites. The comparison of block-spin correlation functions from the largest lattices yields the nearest-neighbor critical coupling ${K}_{1}^{c}=0.221654(6)$. After allowing for (i) interpolation to this best estimate for ${K}_{1}^{c}$, (ii) an apparent finite-size effect in the renormalization-group transformation due to the measurement of correlation functions of too few (seven) operators, and (iii) the extrapolation for the effect of a slow transient towards the fixed point, the values $\ensuremath{\nu}=0.629(4)$ and $\ensuremath{\eta}=0.031(5)$ are obtained for the thermal and magnetic exponents. The correction-to-scaling exponent $\ensuremath{\omega}$ is estimated to be around 1; to obtain an accuracy competitive with other methods requires measurements with more than seven operators. We briefly review the problem of redundant operators and indicate the future prospects for this kind of calculation.

Physical review. B, Condensed matter•Apr 1, 1984•314 citations

Inverse Monte Carlo Renormalization Group Transformations for Critical Phenomena

Dorit Ron, Robert H. Swendsen, Achi Brandt

We introduce a computationally stable inverse Monte Carlo renormalization group transformation method that provides a number of advantages for the calculation of critical properties. We are able to simulate the fixed point of a renormalization group for arbitrarily large lattices without critical slowing down. The log-log scaling plots obtained with this method show remarkable linearity, leading to accurate estimates for critical exponents. We illustrate this method with calculations in two- and three-dimensional Ising models for a variety of renormalization group transformations.

Physical Review Letters•Dec 18, 2002•36 citations
We present a surprisingly simple approach to high-accuracy calculations of the critical properties of the three-dimensional Ising model. The method uses a modified block-spin transformation with a tunable parameter to improve convergence in the Monte Carlo renormalization group. The block-spin parameter must be tuned differently for different exponents to produce optimal convergence.
The majority-rule, block-spin, renormalization-group transformation for the d=3d=3d=3 Ising model is studied, with the use of a recently developed technique for calculating renormalized coupling parameters from a single Monte Carlo simulation. Renormalization-group trajectories and the approximate fixed point are calculated. Improvements in the convergence of the Monte Carlo renormalization-group calculations of critical exponents are discussed.
We review the assumptions on which the Monte Carlo renormalization technique is based, in particular, the analyticity of the block-spin transformations. On this basis, we select an optimized Kadanoff blocking rule in combination with the simulation of a d=3d\phantom{\rule{0ex}{0ex}}=\phantom{\rule{0ex}{0ex}}3d=3 Ising model with reduced corrections to scaling. This is achieved by including interactions with second and third neighbors. As a consequence of the improved transformation, this Monte Carlo renormalization method yields a fast convergence and a high accuracy. The results for the critical exponents are yH=2.481(1){y}_{H}\phantom{\rule{0ex}{0ex}}=\phantom{\rule{0ex}{0ex}}2.481(1)yH​=2.481(1) and yT=1.585(3){y}_{T}\phantom{\rule{0ex}{0ex}}=\phantom{\rule{0ex}{0ex}}1.585(3)yT​=1.585(3).
The Monte Carlo renormalization group is applied to the three-dimensional Ising model on simple cubic lattices with 83{8}^{3}83, 163{16}^{3}163, 323{32}^{3}323, and 643{64}^{3}643 sites. The comparison of block-spin correlation functions from the largest lattices yields the nearest-neighbor critical coupling K1c=0.221654(6){K}_{1}^{c}=0.221654(6)K1c​=0.221654(6). After allowing for (i) interpolation to this best estimate for K1c{K}_{1}^{c}K1c​, (ii) an apparent finite-size effect in the renormalization-group transformation due to the measurement of correlation functions of too few (seven) operators, and (iii) the extrapolation for the effect of a slow transient towards the fixed point, the values $\ensuremath{\nu}=0.629(4)$ and $\ensuremath{\eta}=0.031(5)$ are obtained for the thermal and magnetic exponents. The correction-to-scaling exponent $\ensuremath{\omega}$ is estimated to be around 1; to obtain an accuracy competitive with other methods requires measurements with more than seven operators. We briefly review the problem of redundant operators and indicate the future prospects for this kind of calculation.
We introduce a computationally stable inverse Monte Carlo renormalization group transformation method that provides a number of advantages for the calculation of critical properties. We are able to simulate the fixed point of a renormalization group for arbitrarily large lattices without critical slowing down. The log-log scaling plots obtained with this method show remarkable linearity, leading to accurate estimates for critical exponents. We illustrate this method with calculations in two- and three-dimensional Ising models for a variety of renormalization group transformations.