Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1702.02671

On the Local Correctabilities of Projective Reed-Muller Codes

Sian-Jheng Lin

Published Feb 9, 2017• 0 citations
arXivHTMLPDF

Abstract

In this paper, we show that the projective Reed-Muller~(PRM) codes form a family of locally correctable codes~(LCC) in the regime of low query complexities. A PRM code is specified by the alphabet size $q$, the number of variables $m$, and the degree $d$. When $d\leq q-1$, we present a perfectly smooth local decoder to recover a symbol by accessing $γ\leq q$ symbols to the coordinates fall on a line. There are three major parameters considered in LCCs, namely the query complexity, the message length and the code length. This paper shows that PRM codes are shorter than generalized Reed-Muller~(GRM) codes in LCCs. Precisely, given a GRM code over a field of size $q$, there exists a class of shorter codes over a field of size $q-1$, while maintaining the same values on the query complexities and the message lengths.

DOI
10.48550/arxiv.1702.02671

Related papers

A new family of locally correctable codes based on degree-lifted algebraic geometry codes

Eli Ben‐Sasson, Ariel Gabizon, Yohay Kaplan +2 more

We describe new constructions of error correcting codes, obtained by "degree-lifting" a short algebraic geometry base-code of block-length q to a lifted-code of block-length qm, for arbitrary integer m. The construction generalizes the way degree-d, univariate polynomials evaluated over the q-element field (also known as Reed-Solomon codes) are "lifted" to degree-d, m-variate polynomials (Reed-Muller codes). A number of properties are established: The rate of the degree-lifted code is approximately a 1/m!-fraction of the rate of the base-code. The relative distance of the degree-lifted code is at least as large as that of the base-code. This is proved using a generalization of the Schwartz-Zippel Lemma to degree-lifted Algebraic-Geometry codes. [Local correction] If the base code is invariant under a group that is "close" to being doubly-transitive (in a precise manner defined later then the degree-lifted code is locally correctable with query complexity at most q2. The automorphisms of the base-code are crucially used to generate query-sets, abstracting the use of affine-lines in the local correction procedure of Reed-Muller codes. Taking a concrete illustrating example, we show that degree-lifted Hermitian codes form a family of locally correctable codes over an alphabet that is significantly smaller than that obtained by Reed-Muller codes of similar constant rate, message length, and distance.

ACM Symposium on Theory of Computing (STOC)•May 28, 2013•16 citations

Local Correctabilities and Dual Codes of Symmetric Reed–Muller Codes

Wei Yan, Sian-Jheng Lin

Recently, a variant of the Reed-Muller family, called symmetric Reed-Muller codes, was proposed. In this paper, we prove that multivariable symmetric Reed-Muller codes form a class of locally-correctable codes. Then, the dual codes of symmetric Reed-Muller codes are given.

IEEE Information Theory Workshop (ITW)•Oct 17, 2021•0 citations

Recursive decoding of Reed-Muller codes

Ilya I. Dumer

New soft- and hard decision decoding algorithms are presented for general Reed-Muller codes $\left\{\genfrac{}{}{0pt}{}{m}{r}\right\} $ of length $2^{m}$ and distance $2^{m-r}$. We use Plotkin $(u,u+v)$ construction and decompose code $\left\{\genfrac{}{}{0pt}{}{m}{r}\right\} $ onto subblocks $u\in\left\{\genfrac{}{}{0pt}{}{m-1}{r}\right\} $ and $v\in\left\{\genfrac{}{}{0pt}{}{m-1}{r-1}\right\} .$ In decoding, we first try to find a subblock $v$ from the better protected code and then proceed with the block $u$. The likelihoods of the received symbols are recalculated in a way similar to belief propagation. Thus, decoding is relegated to the two constituent codes. We repeat this recursion and execute decoding only at the end nodes $\left\{\genfrac{}{}{0pt}{}{j}{1}\right\} $ and $\left\{\genfrac{}{}{0pt}{}{j}{j-1}\right\} $. The overall complexity has low order of $n\log n.$ It is shown that this decoding substantially outperforms other algorithms of polynomial complexity known for RM codes. In particular, for medium and high code rates, the algorithm corrects most error patterns of weight $d\ln d/2.$

arXiv:1703.05303•Mar 14, 2017•7 citations

Reed-Muller Codes: Spherically-Punctured Codes and Decoding Algorithms

Olga Kapralova

Reed-Muller (RM) codes are classical codes that have enjoyed unabated interest since their introduction in 1954 due to their simple recursive structure and low-complexity decoding. The main goal of the thesis is to develop new coding techniques that can improve the performance of RM codes. In this work, we wish to keep the recursive low-complexity structure of RM codes while extending the sets of possible parameters and decoding algorithms. We address this task using two different methods. First, we consider new code constructions that extend code parameters using puncturing. Second, we design new decoding algorithms that repeatedly use the gradient properties of the classic recursive structure to improve code performance of RM codes. In the first part of the thesis, we propose a new class of codes that enjoy the recursive structure of RM codes, but reduce the exponential length of RM codes to a polynomial in m. These codes are obtained by puncturing classical RM codes, i.e. by restricting binary RM codes to small subsets of their positions. We study new recursive properties of these codes and analyze their parameters. In the second part of the thesis we develop new decoding algorithms for binary RM codes of second order that achieve near optimal performance for short and moderate code lengths. RM codes enjoy some simple decoding procedures; however, these algorithms fall short of optimal performance on moderate block lengths. We propose a suboptimal algorithm that reduces the complexity of maximum-likelihood decoding from super-polynomial order O(n(m+1)/2) to polynomial order O(mn2). At the same time, our numerical simulations show that the new algorithm performs very closely to its maximum-likelihood counterpart for blocks of up to several thousand bits.

•Jan 1, 2013•1 citation

Efficiently Decoding Reed–Muller Codes From Random Errors

Ramprasad Saptharishi, Amir Shpilka, Ben Lee Volk

Reed-Muller (RM) codes encode an m-variate polynomial of degree at most r by evaluating it on all points in {0,1}m. We denote this code by RM(r,m). The minimum distance of RM(r,m) is 2m-rand so it cannot correct more than half that number of errors in the worst case. For random errors one may hope for a better result. In this paper we give an efficient algorithm (in the block length n=2m) for decoding random errors in RM codes far beyond the minimum distance. Specifically, for low-rate codes (of degree r=o(√m)), we can correct a random set of (1/2-o(1))n errors with high probability. For high rate codes (of degree m-r for r=o(√m/log m)), we can correct roughly mr/2errors. More generally, for any integer r, our algorithm can correct any error pattern in RM(m-(2r+2),m), for which the same erasure pattern can be corrected in RM(m-(r+1),m). The results above are obtained by applying recent results of Abbe, Shpilka, and Wigderson (STOC, 2015) and Kudekar et al. (STOC, 2016) regarding the ability of RM codes to correct random erasures. The algorithm is based on solving a carefully defined set of linear equations and thus it is significantly different than other algorithms for decoding RM codes that are based on the recursive structure of the code. It can be seen as a more explicit proof of a result of Abbe et al. that shows a reduction from correcting erasures to correcting errors, and it also bares some similarities with the error-locating pair method of Pellikaan, Duursma, and Kötter that generalizes the Berlekamp-Welch algorithm for decoding Reed-Solomon codes.

arXiv:1503.09092•IEEE Transactions on Information Theory•Feb 17, 2017•30 citations

Soft-decision list decoding of Reed-Muller codes with linear complexity

Ilya I. Dumer, Grigory A. Kabatiansky, Cédric Tavernier

Let a binary Reed-Muller code RM(s;m) of length n be used on a memoryless channel with an input alphabet ±1 and a real-valued output ℝ. Given a received vector y in ℝn; we define its generalized distance T to any codeword c as the sum Σ|yj|taken over all positions j, in which vectors y, c have opposite signs. We then consider the list ℒTof codewords located within distance T from the received vector y and estimate the size LTof this list using the generalized Johnson bound. For any RM code RM(s,m) of fixed order s, the algorithm is proposed that performs list decoding beyond the error-correcting radius with linear complexity in length n and retrieves the code list ℒTwith complexity of order nsLTfor any decoding radius T within the generalized Johnson bound.

IEEE International Symposium on Information Theory (ISIT)•Jul 1, 2011•1 citation
In this paper, we show that the projective Reed-Muller~(PRM) codes form a family of locally correctable codes~(LCC) in the regime of low query complexities. A PRM code is specified by the alphabet size qqq, the number of variables mmm, and the degree ddd. When d≤q−1d\leq q-1d≤q−1, we present a perfectly smooth local decoder to recover a symbol by accessing γ≤qγ\leq qγ≤q symbols to the coordinates fall on a line. There are three major parameters considered in LCCs, namely the query complexity, the message length and the code length. This paper shows that PRM codes are shorter than generalized Reed-Muller~(GRM) codes in LCCs. Precisely, given a GRM code over a field of size qqq, there exists a class of shorter codes over a field of size q−1q-1q−1, while maintaining the same values on the query complexities and the message lengths.
We describe new constructions of error correcting codes, obtained by "degree-lifting" a short algebraic geometry base-code of block-length q to a lifted-code of block-length qm, for arbitrary integer m. The construction generalizes the way degree-d, univariate polynomials evaluated over the q-element field (also known as Reed-Solomon codes) are "lifted" to degree-d, m-variate polynomials (Reed-Muller codes). A number of properties are established: The rate of the degree-lifted code is approximately a 1/m!-fraction of the rate of the base-code. The relative distance of the degree-lifted code is at least as large as that of the base-code. This is proved using a generalization of the Schwartz-Zippel Lemma to degree-lifted Algebraic-Geometry codes. [Local correction] If the base code is invariant under a group that is "close" to being doubly-transitive (in a precise manner defined later then the degree-lifted code is locally correctable with query complexity at most q2. The automorphisms of the base-code are crucially used to generate query-sets, abstracting the use of affine-lines in the local correction procedure of Reed-Muller codes. Taking a concrete illustrating example, we show that degree-lifted Hermitian codes form a family of locally correctable codes over an alphabet that is significantly smaller than that obtained by Reed-Muller codes of similar constant rate, message length, and distance.
New soft- and hard decision decoding algorithms are presented for general Reed-Muller codes $\left\{\genfrac{}{}{0pt}{}{m}{r}\right\} $ of length 2m2^{m}2m and distance 2m−r2^{m-r}2m−r. We use Plotkin (u,u+v)(u,u+v)(u,u+v) construction and decompose code $\left\{\genfrac{}{}{0pt}{}{m}{r}\right\} $ onto subblocks $u\in\left\{\genfrac{}{}{0pt}{}{m-1}{r}\right\} $ and v∈{m−1r−1}.v\in\left\{\genfrac{}{}{0pt}{}{m-1}{r-1}\right\} .v∈{r−1m−1​}. In decoding, we first try to find a subblock vvv from the better protected code and then proceed with the block uuu. The likelihoods of the received symbols are recalculated in a way similar to belief propagation. Thus, decoding is relegated to the two constituent codes. We repeat this recursion and execute decoding only at the end nodes $\left\{\genfrac{}{}{0pt}{}{j}{1}\right\} $ and $\left\{\genfrac{}{}{0pt}{}{j}{j-1}\right\} $. The overall complexity has low order of nlog⁡n.n\log n.nlogn. It is shown that this decoding substantially outperforms other algorithms of polynomial complexity known for RM codes. In particular, for medium and high code rates, the algorithm corrects most error patterns of weight dln⁡d/2.d\ln d/2.dlnd/2.
Reed-Muller (RM) codes are classical codes that have enjoyed unabated interest since their introduction in 1954 due to their simple recursive structure and low-complexity decoding. The main goal of the thesis is to develop new coding techniques that can improve the performance of RM codes. In this work, we wish to keep the recursive low-complexity structure of RM codes while extending the sets of possible parameters and decoding algorithms. We address this task using two different methods. First, we consider new code constructions that extend code parameters using puncturing. Second, we design new decoding algorithms that repeatedly use the gradient properties of the classic recursive structure to improve code performance of RM codes. In the first part of the thesis, we propose a new class of codes that enjoy the recursive structure of RM codes, but reduce the exponential length of RM codes to a polynomial in m. These codes are obtained by puncturing classical RM codes, i.e. by restricting binary RM codes to small subsets of their positions. We study new recursive properties of these codes and analyze their parameters. In the second part of the thesis we develop new decoding algorithms for binary RM codes of second order that achieve near optimal performance for short and moderate code lengths. RM codes enjoy some simple decoding procedures; however, these algorithms fall short of optimal performance on moderate block lengths. We propose a suboptimal algorithm that reduces the complexity of maximum-likelihood decoding from super-polynomial order O(n(m+1)/2) to polynomial order O(mn2). At the same time, our numerical simulations show that the new algorithm performs very closely to its maximum-likelihood counterpart for blocks of up to several thousand bits.
Reed-Muller (RM) codes encode an m-variate polynomial of degree at most r by evaluating it on all points in {0,1}m. We denote this code by RM(r,m). The minimum distance of RM(r,m) is 2m-rand so it cannot correct more than half that number of errors in the worst case. For random errors one may hope for a better result. In this paper we give an efficient algorithm (in the block length n=2m) for decoding random errors in RM codes far beyond the minimum distance. Specifically, for low-rate codes (of degree r=o(√m)), we can correct a random set of (1/2-o(1))n errors with high probability. For high rate codes (of degree m-r for r=o(√m/log m)), we can correct roughly mr/2errors. More generally, for any integer r, our algorithm can correct any error pattern in RM(m-(2r+2),m), for which the same erasure pattern can be corrected in RM(m-(r+1),m). The results above are obtained by applying recent results of Abbe, Shpilka, and Wigderson (STOC, 2015) and Kudekar et al. (STOC, 2016) regarding the ability of RM codes to correct random erasures. The algorithm is based on solving a carefully defined set of linear equations and thus it is significantly different than other algorithms for decoding RM codes that are based on the recursive structure of the code. It can be seen as a more explicit proof of a result of Abbe et al. that shows a reduction from correcting erasures to correcting errors, and it also bares some similarities with the error-locating pair method of Pellikaan, Duursma, and Kötter that generalizes the Berlekamp-Welch algorithm for decoding Reed-Solomon codes.
Let a binary Reed-Muller code RM(s;m) of length n be used on a memoryless channel with an input alphabet ±1 and a real-valued output ℝ. Given a received vector y in ℝn; we define its generalized distance T to any codeword c as the sum Σ|yj|taken over all positions j, in which vectors y, c have opposite signs. We then consider the list ℒTof codewords located within distance T from the received vector y and estimate the size LTof this list using the generalized Johnson bound. For any RM code RM(s,m) of fixed order s, the algorithm is proposed that performs list decoding beyond the error-correcting radius with linear complexity in length n and retrieves the code list ℒTwith complexity of order nsLTfor any decoding radius T within the generalized Johnson bound.