We give a concrete description of a controlled quantum stochastic dynamical model corresponding to a quantum system (a cavity mode) undergoing continual quadrature measurements, with a PID controller acting on the filtered estimate for the mode operator. The control has three feedback paths: P (proportional), I (integral) and D (derivative) of the error signal. Central use is made of the input and output pictures when constructing the model: these unitarily equivalent pictures are presented in the paper, and used to transfer concepts relating to the controlled internal dynamics to those relating to measurement output, and vice versa. The approach shows the general principle for investigating mathematically and physically consistent models in which standard control theoretic methods are to be extended to the quantum setting.
We give a concrete description of a controlled quantum stochastic dynamical model corresponding to a quantum system (a cavity mode) undergoing continual quadrature measurements, with a PID controller acting on the filtered estimate for the mode operator. The control has three feedback paths: P (proportional), I (integral) and D (derivative) of the error signal. Central use is made of the input and output pictures when constructing the model: these unitarily equivalent pictures are presented in the paper, and used to transfer concepts relating to the controlled internal dynamics to those relating to measurement output, and vice versa. The approach shows the general principle for investigating mathematically and physically consistent models in which standard control theoretic methods are to be extended to the quantum setting.
Abstract In quantum physics, a stochastic master equation (SME) estimates the state (density operator) of a quantum system in the Schrödinger picture based on a record of measurements made on the system. In the Heisenberg picture, the SME is a quantum filter. For a linear quantum system subject to linear measurements and Gaussian noise, the dynamics may be described by quantum stochastic differential equations (QSDEs), also known as quantum Langevin equations, and the quantum filter reduces to a so-called quantum Kalman filter. In this article, we introduce a quantum extended Kalman filter (quantum EKF), which applies a commutative approximation and a time-varying linearization to systems of nonlinear QSDEs. We will show that there are conditions under which a filter similar to a classical EKF can be implemented for quantum systems. The boundedness of estimation errors and the filtering problem with ‘state-dependent’ covariances for process and measurement noises are also discussed. We demonstrate the effectiveness of the quantum EKF by applying it to systems that involve multiple modes, nonlinear Hamiltonians, and simultaneous jump-diffusive measurements.
The concept of a controlled flow of a dynamical system, especially when the controlling process feeds information back about the system, is of central importance in control engineering. In this paper, we build on the ideas presented by Bouten and van Handel [Quantum Stochastics and Information: Statistics, Filtering and Control (World Scientific, 2008)] and develop a general theory of quantum feedback. We elucidate the relationship between the controlling processes, Z, and the measured processes, Y, and to this end we make a distinction between what we call the input picture and the output picture. We should note that the input-output relations for the noise fields have additional terms not present in the standard theory but that the relationship between the control processes and measured processes themselves is internally consistent—we do this for the two main cases of quadrature measurement and photon-counting measurement. The theory is general enough to include a modulating filter which post-processes the measurement readout Y before returning to the system. This opens up the prospect of applying very general engineering feedback control techniques to open quantum systems in a systematic manner, and we consider a number of specific modulating filter problems. Finally, we give a brief argument as to why most of the rules for making instantaneous feedback connections [J. Gough and M. R. James, Commun. Math. Phys. 287, 1109 (2009)] ought to apply for controlled dynamical networks as well.
Proportional-Integral-Derivative (PID) control is used for automatically regulating a measurable quantity to a desired setpoint. It is widely used in different types of classical control electronics. Here, we show how extending the feedback theory in quantum systems to include the derivative and integral parts influences both the transient and steady-state behavior of the amplitude and squeezing of a mechanical quadrature in an optomechanical system. We show that, in contrast to standard proportional feedback, derivative feedback affects both the conditional and unconditional squeezing. Furthermore, we demonstrate how feedback may be employed to drive a mechanical quadrature to track a desired reference signal. Our findings offer new routes for an improved quantum state control and measurement precision.
This paper gives a unified approach to feedback control theory of quantum mechanical systems of bosonic modes described by noncommutative operators. A quantum optical closed-loop, including a plant and controller, is developed and its fundamental structural properties are analyzed extensively from a purely quantum mechanical point of view, in order to facilitate the use of control theory in microscopic world described by quantum theory. In particular, an input-output description of quantum mechanical systems which is essential in describing the behavior of the feedback systems is fully formulated and developed. This would then provide a powerful tool for quantum control and pave an avenue that connects control theory to quantum dynamics. This paper is divided into two parts. The first part is devoted to the basic formulation of quantum feedback control via quantum communication and local operations on an optical device, cavity, that can be regarded as a unit of quantum dynamics of bosonic modes. The formulation introduced in this paper presents the feature intrinsic in quantum feedback systems based on quantum stochastic differential equations. The input-output description provides a basis for developing quantum feedback control through the transfer function representation of quantum feedback systems. In the follow-up paper, the quantum mechanical representation of feedback is further elaborated to yield the control theoretical representation of fundamental notions of quantum theory, uncertainty principle, e.g., and some applications are presented.
The engineering and control of devices at the quantum mechanical level—such as those consisting of small numbers of atoms and photons—is a delicate business. The fundamental uncertainty that is inherently present at this scale manifests itself in the unavoidable presence of noise, making this a novel field of application for stochastic estimation and control theory. In this expository paper we demonstrate estimation and feedback control of quantum mechanical systems in what is essentially a noncommutative version of the binomial model that is popular in mathematical finance. The model is extremely rich and allows a full development of the theory while remaining completely within the setting of finite-dimensional Hilbert spaces (thus avoiding the technical complications of the continuous theory). We introduce discretized models of an atom in interaction with the electromagnetic field, obtain filtering equations for photon counting and homodyne detection, and solve a stochastic control problem using dynamic programming and Lyapunov function methods.
Quantum engineering has seen rapid growth in the past two decades. Physicists, mathematicians and engineers have been working in unison to control a number of diverse systems in the quantum regime. Quantum control involving feedback has become particularly topical, as using information gained from a system can lead to more stable operation of a control protocol. Quantum feedback can be split into two paradigms: measurement based feedback and coherent feedback. Although it is increasingly evident that retaining the coherence of the feedback signal provides an intrinsic advantage over measurement-based feedback, coherent feedback is still a new paradigm. In particular, there are a limited number of options for coherently estimating a state within a feedback loop. As a step towards better understanding and implementation of quantum feedback, this thesis reports on modelling, estimation and control of quantum systems. The first topic is physical realisability of a variety of quantum systems, especially finite level systems and their outgrowths. Bilinear quantum stochastic differential equations (QSDEs) have to be employed to characterise these systems, which is a significant complement to the previous work on linear QSDEs. In light of the fact that direct and indirect couplings play a vital role in quantum network and control, we also provide state-space models for different classes of coupled open quantum systems incorporating both bidirectional and directional interactions. The second topic is coherent observers and optimal filtering. It is well established that classically estimation using the Kalman filter can provide improved performance over direct feedback schemes, and similar demonstrations have been performed for measurement-based quantum feedback. In this thesis I present coherent observers, including least mean squares estimators, which are driven by the coherent output of a specified quantum plant and designed such that some subset of the observer and plant's expectation values converge in the asymptotic limit. Not only can estimators "observe" mean quantities of quantum plant, but also they can "estimate" quantum correlations such as entanglement. This is of much importance to coherent feedback design in the absence of measurement steps without loss of fidelity. Last but not least, several topics regarding stabilisation and control design of quantum systems are discussed in my thesis. To be specific, tools for quantum stability analysis (e.g. Lyapunov conditions) are provided. Both measurement-based feedback and coherent feedback control design are taken into account. A measurement-based optimal controller for opto-mechanical systems aimed at synchronising different mechanical modes is presented, which is application-oriented. Moreover, A general observer-based coherent feedback control framework is studied, and I demonstrate a pole-placement approach via coherent observers that can be applied to various scenarios.