Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1612.06014 · Nanoscale

Bistable scattering in graphene-coated dielectric nanowires

Rujiang Li, Huaping Wang, Bin Zheng, Shahram Dehdashti, Er‐Ping Li, Hongsheng Chen

Published Jan 1, 2017• 20 citations
arXivHTMLPDF

Abstract

In nonlinear plasmonics, the switching threshold of optical bistability is limited by the weak nonlinear responses from the conventional Kerr dielectric media. Considering the giant nonlinear susceptibility of graphene, here we develop a nonlinear scattering model under the mean field approximation and study the bistable scattering in graphene-coated dielectric nanowires based on the semi-analytical solutions. We find that the switching intensities of bistable scattering can be smaller than 1 MW cm−2 at the working frequency. To further decrease the switching intensities, we show that the most important factor that restricts the bistable scattering is the relaxation time of graphene. Our work not only reveals some general characteristics of graphene-based bistable scattering, but also provides a guidance to further applications of optical bistability in the high speed all-optical signal processing.

DOI
10.1039/c7nr03056h

Related papers

Enhanced nonlinear optical response of core–shell graphene-wrapped spherical nanoparticles

Tayebeh Naseri, Mohsen Balaei

We study the nonlinear optical response of graphene in nanostructures. The spherical nanoparticle coated with a monolayer of graphene displays enhanced optical Kerr nonlinearity and, consequently, optical bistability and multistability in a broad range of incident optical intensity. This optical bistability significantly appertains on the geometry of the shell-coated nanoparticle, the fractional volume of the metallic core, as well as the core genre and Fermi energy of graphene. In particular, Fermi energy could also affect the optical bistability and induce switching from optical bistability to optical multistability. Due to the importance of core–shell nanoparticles, this model may find potential applications in optical bistable devices such as all-optical switches, optical transistors, and memories.

Journal of the Optical Society of America B•Aug 27, 2018•19 citations

Analytical model for optical bistability in nonlinear metal nano-antennae involving Kerr materials

Fei Zhou, Ye Liu, Zhi-Yuan Li +1 more

Optical bistability at nanoscale is a promising way to realize optical switching, a key component of integrated nanophotonic devices. In this work we present an analytical model for optical bistability in a metal nano-antenna involving Kerr nonlinear medium based on detailed analysis of the correlation between the incident and extinction light intensity under surface plasmon resonance (SPR). The model allows one to construct a clear picture on how the threshold, contrast, and other characteristics of optical bistability are influenced by the nonlinear coefficient, incident light intensity, local field enhancement factor, SPR peak width, and other physical parameters of the nano-antenna. It shows that the key towards low threshold power and high contrast optical bistability in the nanosystem is to reduce the SPR peak width. This can be achieved by reducing the absorption of metal materials or introducing gain media into nanosystems.

Optics Express•Jun 7, 2010•93 citations

Long-range surface plasmon-induced tunable ultralow threshold optical bistability using graphene sheets at terahertz frequency

Aparupa Kar, Nabamita Goswami, Ardhendu Saha

A proposal on optical bistability at ultralow switching threshold and lower Fermi-level of graphene around 2 THz is implemented analytically through the proposed long-range surface plasmon resonance configuration by employing local field enhancement effects owing to the excitation of a graphene symmetric mode within graphene sheets. Reported threshold intensity for the optical bistability to date is 1.6 kW/cm2 within the terahertz region and 1.83 MW/cm2 at near-IR range. Whereas the proposed scheme explores the possibility of reducing this threshold down to 143.68 W/cm2, this technique proffers potential applications in nanoillumination, optical memory, and all-optical switching at an ultra-low threshold.

Applied Optics•Mar 7, 2017•14 citations

Low-Threshold and High-Extinction-Ratio Optical Bistability within a Graphene-Based Perfect Absorber

Zhengzhuo Zhang, Qiaoge Sun, Yansong Fan +4 more

A kind of graphene-based perfect absorber which can generate low-threshold and high-extinction-ratio optical bistability in the near-IR band is proposed and simulated with numerical methods. The interaction between input light and monolayer graphene in the absorber can be greatly enhanced due to the perfect absorption. The large nonlinear coefficient of graphene and the strong light-graphene interaction contribute to the nonlinear response of the structure, leading to relatively low switching thresholds of less than 2.5 MW/cm2 for an absorber with a Q factor lower than 1000. Meanwhile, the extinction ratio of bistable states in the absorber reaches an ultrahigh value of 47.3 dB at 1545.3 nm. Moreover, the influence of changing the structural parameters on the bistable behaviors is discussed in detail, showing that the structure can tolerate structural parametric deviation to some extent. The proposed bistable structure with ultra-compact size, low thresholds, high extinction ratio, and ultrafast response time could be of great applications for fabricating high-performance all-optical-communication devices.

Nanomaterials•Jan 18, 2023•6 citations

Optical bistability in a nonlinear-shell-coated metallic nanoparticle

Hongli Chen, You‐Ming Zhang, Baile Zhang +1 more

We provide a self-consistent mean field approximation in the framework of Mie scattering theory to study the optical bistability of a metallic nanoparticle coated with a nonlinear shell. We demonstrate that the nanoparticle coated with a weakly nonlinear shell exhibits optical bistability in a broad range of incident optical intensity. This optical bistability critically relies on the geometry of the shell-coated nanoparticle, especially the fractional volume of the metallic core. The incident wavelength can also affect the optical bistability. Through an optimization-like process, we find a design with broader bistable region and lower threshold field by adjusting the size of the nonlinear shell, the fractional volume of the metallic core, and the incident wavelength. These results may find potential applications in optical bistable devices such as all-optical switches, optical transistors and optical memories.

Scientific Reports•Feb 24, 2016•26 citations

Low threshold optical bistability at terahertz frequencies with graphene surface plasmons

Xiaoyu Dai, Leyong Jiang, Yuanjiang Xiang

We propose a modified Kretschmann-Raether configuration to realize the low threshold optical bistable devices at the terahertz frequencies. The metal layer is replaced by the dielectric sandwich structure with the insertion of graphene, and this configuration can support TM-polarization surface electromagnetic wave. The surface plasmon resonance is strongly dependent on the Fermi-level of graphene and the thickness of the sandwich structure. It is found that the switching-up and switching-down intensities required to observe the optical bistable behavior are lowered markedly due to the excitation of the graphene surface plasmons, thus making this configuration a prime candidate for experimental investigation at the terahertz range. And the switching threshold value can be further reduced by decreasing the Fermi-level or increasing the thickness of sandwich structure, hence providing a new way for realizing tunable optical bistable devices. Finally, the optical bistability at higher terahertz frequency and the influence of relaxation time under the actual experimental condition on Fermi-level are discussed.

Scientific Reports•Jul 21, 2015•95 citations
In nonlinear plasmonics, the switching threshold of optical bistability is limited by the weak nonlinear responses from the conventional Kerr dielectric media. Considering the giant nonlinear susceptibility of graphene, here we develop a nonlinear scattering model under the mean field approximation and study the bistable scattering in graphene-coated dielectric nanowires based on the semi-analytical solutions. We find that the switching intensities of bistable scattering can be smaller than 1 MW cm−2 at the working frequency. To further decrease the switching intensities, we show that the most important factor that restricts the bistable scattering is the relaxation time of graphene. Our work not only reveals some general characteristics of graphene-based bistable scattering, but also provides a guidance to further applications of optical bistability in the high speed all-optical signal processing.
We study the nonlinear optical response of graphene in nanostructures. The spherical nanoparticle coated with a monolayer of graphene displays enhanced optical Kerr nonlinearity and, consequently, optical bistability and multistability in a broad range of incident optical intensity. This optical bistability significantly appertains on the geometry of the shell-coated nanoparticle, the fractional volume of the metallic core, as well as the core genre and Fermi energy of graphene. In particular, Fermi energy could also affect the optical bistability and induce switching from optical bistability to optical multistability. Due to the importance of core–shell nanoparticles, this model may find potential applications in optical bistable devices such as all-optical switches, optical transistors, and memories.
Optical bistability at nanoscale is a promising way to realize optical switching, a key component of integrated nanophotonic devices. In this work we present an analytical model for optical bistability in a metal nano-antenna involving Kerr nonlinear medium based on detailed analysis of the correlation between the incident and extinction light intensity under surface plasmon resonance (SPR). The model allows one to construct a clear picture on how the threshold, contrast, and other characteristics of optical bistability are influenced by the nonlinear coefficient, incident light intensity, local field enhancement factor, SPR peak width, and other physical parameters of the nano-antenna. It shows that the key towards low threshold power and high contrast optical bistability in the nanosystem is to reduce the SPR peak width. This can be achieved by reducing the absorption of metal materials or introducing gain media into nanosystems.
A proposal on optical bistability at ultralow switching threshold and lower Fermi-level of graphene around 2 THz is implemented analytically through the proposed long-range surface plasmon resonance configuration by employing local field enhancement effects owing to the excitation of a graphene symmetric mode within graphene sheets. Reported threshold intensity for the optical bistability to date is 1.6 kW/cm2 within the terahertz region and 1.83 MW/cm2 at near-IR range. Whereas the proposed scheme explores the possibility of reducing this threshold down to 143.68 W/cm2, this technique proffers potential applications in nanoillumination, optical memory, and all-optical switching at an ultra-low threshold.
A kind of graphene-based perfect absorber which can generate low-threshold and high-extinction-ratio optical bistability in the near-IR band is proposed and simulated with numerical methods. The interaction between input light and monolayer graphene in the absorber can be greatly enhanced due to the perfect absorption. The large nonlinear coefficient of graphene and the strong light-graphene interaction contribute to the nonlinear response of the structure, leading to relatively low switching thresholds of less than 2.5 MW/cm2 for an absorber with a Q factor lower than 1000. Meanwhile, the extinction ratio of bistable states in the absorber reaches an ultrahigh value of 47.3 dB at 1545.3 nm. Moreover, the influence of changing the structural parameters on the bistable behaviors is discussed in detail, showing that the structure can tolerate structural parametric deviation to some extent. The proposed bistable structure with ultra-compact size, low thresholds, high extinction ratio, and ultrafast response time could be of great applications for fabricating high-performance all-optical-communication devices.
We provide a self-consistent mean field approximation in the framework of Mie scattering theory to study the optical bistability of a metallic nanoparticle coated with a nonlinear shell. We demonstrate that the nanoparticle coated with a weakly nonlinear shell exhibits optical bistability in a broad range of incident optical intensity. This optical bistability critically relies on the geometry of the shell-coated nanoparticle, especially the fractional volume of the metallic core. The incident wavelength can also affect the optical bistability. Through an optimization-like process, we find a design with broader bistable region and lower threshold field by adjusting the size of the nonlinear shell, the fractional volume of the metallic core, and the incident wavelength. These results may find potential applications in optical bistable devices such as all-optical switches, optical transistors and optical memories.
We propose a modified Kretschmann-Raether configuration to realize the low threshold optical bistable devices at the terahertz frequencies. The metal layer is replaced by the dielectric sandwich structure with the insertion of graphene, and this configuration can support TM-polarization surface electromagnetic wave. The surface plasmon resonance is strongly dependent on the Fermi-level of graphene and the thickness of the sandwich structure. It is found that the switching-up and switching-down intensities required to observe the optical bistable behavior are lowered markedly due to the excitation of the graphene surface plasmons, thus making this configuration a prime candidate for experimental investigation at the terahertz range. And the switching threshold value can be further reduced by decreasing the Fermi-level or increasing the thickness of sandwich structure, hence providing a new way for realizing tunable optical bistable devices. Finally, the optical bistability at higher terahertz frequency and the influence of relaxation time under the actual experimental condition on Fermi-level are discussed.