Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1612.04160 · npj Quantum Information

Efficient protocol for qubit initialization with a tunable environment

Jani Tuorila, Matti Partanen, Tapio Ala-Nissilä, Mikko Möttönen

Published Jul 10, 2017• 45 citations
arXivHTMLPDF

Abstract

Abstract We propose an efficient qubit initialization protocol based on a dissipative environment that can be dynamically adjusted. Here, the qubit is coupled to a thermal bath through a tunable harmonic oscillator. On-demand initialization is achieved by sweeping the oscillator rapidly into resonance with the qubit. This resonant coupling with the engineered environment induces fast relaxation to the ground state of the system, and a consecutive rapid sweep back to off resonance guarantees weak excess dissipation during quantum computations. We solve the corresponding quantum dynamics using a Markovian master equation for the reduced density operator of the qubit-bath system. This allows us to optimize the parameters and the initialization protocol for the qubit. Our analytical calculations show that the ground-state occupation of our system is well protected during the fast sweeps of the environmental coupling and, consequently, we obtain an estimate for the duration of our protocol by solving the transition rates between the low-energy eigenstates with the Jacobian diagonalization method. Our results suggest that the current experimental state of the art for the initialization speed of superconducting qubits at a given fidelity can be considerably improved.

DOI
10.1038/s41534-017-0027-1

Related papers

Implementing rapid reset of superconducting qubits with on-chip dissipation

Feiyu Li, Yang Liu, Zhen Yang +10 more

Rapid and high-fidelity qubit reset is essential for quantum state initialization and quantum error correction. Conventional reset protocols for superconducting qubits often rely on dissipative elements connected to external circuitry, exposing qubits to thermal noise from higher-temperature environments. Here, we experimentally demonstrate a scalable approach to qubit reset and leakage removal over multiple transmon qubits using dedicated dissipation units comprising resonators coupled to on-chip resistive loads. This architecture provides Purcell protection while isolating the qubits from warmer external circuitry. We achieve a median reset time constant of approximately 48 ns for the $|g\rangle-|e\rangle$ transition, with an effective bath temperature of 30 mK. A 400-ns reset pulse yields residual excited-state populations of $0.29\%$ and $0.67\%$ for qubits initialized in $|g\rangle$ and $|e\rangle$, respectively. We further demonstrate efficient leakage removal from the $|f\rangle$ state, reducing its residual population to $0.51\%$. These results establish a simple, reproducible, and easy-to-integrate approach to dissipation engineering in superconducting quantum processors.

arXiv:2611.14391•Nov 10, 2026•0 citations

Thermalization from quenching in coupled oscillators

M. Harinarayanan, Karthik Rajeev

We introduce a finite-time protocol that thermalizes a quantum harmonic oscillator, initially in its ground state, without requiring a macroscopic bath. The method uses a second oscillator as an effective environment and implements sudden quenches of the oscillator frequencies and coupling. Owing to the Gaussian nature of the dynamics, the thermalization condition reduces to three solvable equations, yielding exact analytic solutions for a dense discrete set of temperatures and numerical solutions in all other cases. Any target temperature can be approximated with arbitrary precision, with a trade-off between speed and accuracy. The simplicity of the protocol makes it a promising tool for rapid, controlled thermalization in quantum thermodynamics experiments and state preparation.

quant-pharXiv:2512.04028•Dec 4, 2025•0 citations

Reservoir engineering using quantum optimal control for qubit reset

Daniel Basilewitsch, F. Cosco, Nicola Lo Gullo +4 more

Abstract We determine how to optimally reset a superconducting qubit which interacts with a thermal environment in such a way that the coupling strength is tunable. Describing the system in terms of a time-local master equation with time-dependent decay rates and using quantum optimal control theory, we identify temporal shapes of tunable level splittings which maximize the efficiency of the reset protocol in terms of duration and error. Time-dependent level splittings imply a modification of the system-environment coupling, varying the decay rates as well as the Lindblad operators. Our approach thus demonstrates efficient reservoir engineering employing quantum optimal control. We find the optimized reset strategy to consist in maximizing the decay rate from one state and driving non-adiabatic population transfer into this strongly decaying state.

arXiv:1903.05059•New Journal of Physics•Sep 1, 2019•33 citations

Entangling Superconducting Qubits via Energy-Selective Local Reservoirs

Qihao Guo, Botao Du, Ruichao Ma

Engineered dissipation provides a powerful route to controlling and stabilizing quantum states in open systems. Superconducting circuits are particularly suited to this approach due to their tunable coupling to dissipative environments. Here we realize programmable local reservoirs for superconducting qubits through parametrically driven coupling to readout resonators, creating energy-selective incoherent pump and loss. Using coupled superconducting qubits, we autonomously stabilize entangled single-excitation states with fidelity up to 90.8%. We probe the stabilization dynamics under varying initial conditions and bath parameters, and implement robust classical shadow estimation for accurate and scalable state characterization. Finally, we numerically study a configuration where the engineered pump and loss share a common dissipative mode, leading to reservoir-mediated interference and classically correlated steady states. Our results demonstrate a scalable and hardware-efficient framework for dissipative preparation and control of correlated many-body states in superconducting circuits.

quant-pharXiv:2605.12429•Physical Review Research•May 13, 2026•2 citations

Programmable coupling to electromagnetic environments in superconducting qubits

Aashish Sah

Superconducting quantum circuits have emerged as a leading platform for building large-scale quantum computers, owing to their ability to engineer strong, highly tunable interactions. However, achieving high-fidelity quantum operations requires overcoming the fundamental isolation-andcontrol challenge: qubits must be well-isolated from their electromagnetic environment to maintain long coherence times, yet they require strong external coupling for fast control, readout, and initialization. In current architectures, this trade-off often demands complex auxiliary circuitry that can introduce additional noise and thermal loads. This thesis presents novel circuit designs and control techniques to address the isolation-and-control challenge in superconducting transmon qubits. First, we introduce integrated on-chip filters, in particular, 𝜆/4 and 𝜆/2 transmission line filters that exhibit a stopband at the qubit frequency. This design protects the qubit from Purcell decay, yielding up to a 200-fold improvement in the energy relaxation time 𝑇1 at the stopband. To achieve fast single-qubit gates despite this isolation, we employ subharmonic driving, demonstrating sub-ten-nanosecond control and Rabi oscillations with a 12-ns pulse duration while significantly reducing the cryogenic thermal load. Building upon these static filters, we propose and experimentally demonstrate the quantum dial, a dynamically tunable band-stop filter consisting of a series array of direct-current superconducting quantum interference devices. The quantum dial enables on-demand tuning of the qubit–environment coupling, including a reduction of 𝑇1 from over 150 μs to roughly 200 ns, while introducing minimal ac Stark shifts. We demonstrate its versatility by dialing between three operational regimes: an idle state with 99.99% fidelity, a control state enabling 99.9% fidelity for 40-ns single-qubit gates at −110 dBm, and a strongly coupled state for unconditional, state-independent qubit reset. Furthermore, the quantum dial enables qubit thermometry close to the quantum-Fisherinformation bound, with a noise-equivalent temperature down to 0.6 mK/√Hz at 60 mK. Alongside the development of these dedicated control architectures, this thesis contributes to the broader framework of circuit quantum electrodynamics by advancing specific microwave engineering and characterization techniques. In particular, we explore the miniaturization of circuit footprints through the realization of compact sub-gigahertz inductor-capacitor resonators. Additionally, we contribute to the optimization of unconditional qubit reset using a single-junction quantum-circuit refrigerator, and to the advanced characterization of microwave fields via computed tomography of propagating microwave photons. In summary, these results demonstrate fixed and tunable drive-line filters that suppress idle-state radiative decay while preserving selected control, reset, and thermometry operations. By replacing static coupling compromises with temporally programmable environments, these architectures offer a promising route to reducing noise, mitigating crosstalk, and accelerating error-correction cycles in future superconducting quantum processors.

•Jan 1, 2026•0 citations

Time-optimal Qubit Reset via Environmental Spectral Structure

Hong-Bo Huang, Hui Dong

Fast qubit reset is essential for qubit reuse in the noisy intermediate-scale quantum computing era, yet it conflicts with the weak decoherence required for high-fidelity computation. We solve the time-optimal reset problem for a frequency-tunable qubit coupled to a structural environment under realistic spectral and control constraints. The optimal strategy consists of a switch--restore--switch sequence, where the qubit is moved from a low-decoherence computational configuration to a high-decoherence restoring configuration and then returned for reuse. For superconducting qubits in four representative environments, this strategy reduces the reset time from typically $\gtrsim\SI{100}{\nano\second}$ to $\SI{20}{\nano\second}$, about $40\%$ of a typical two-qubit gate time, while achieving a reset precision of $10^{-5}$. Our results identify environmental spectral structure as a practical resource for rapid, high-fidelity qubit reset and provide a design principle for qubit reuse on qubit-limited processors.

quant-pharXiv:2604.21230•Apr 24, 2026•1 citation
Abstract We propose an efficient qubit initialization protocol based on a dissipative environment that can be dynamically adjusted. Here, the qubit is coupled to a thermal bath through a tunable harmonic oscillator. On-demand initialization is achieved by sweeping the oscillator rapidly into resonance with the qubit. This resonant coupling with the engineered environment induces fast relaxation to the ground state of the system, and a consecutive rapid sweep back to off resonance guarantees weak excess dissipation during quantum computations. We solve the corresponding quantum dynamics using a Markovian master equation for the reduced density operator of the qubit-bath system. This allows us to optimize the parameters and the initialization protocol for the qubit. Our analytical calculations show that the ground-state occupation of our system is well protected during the fast sweeps of the environmental coupling and, consequently, we obtain an estimate for the duration of our protocol by solving the transition rates between the low-energy eigenstates with the Jacobian diagonalization method. Our results suggest that the current experimental state of the art for the initialization speed of superconducting qubits at a given fidelity can be considerably improved.
Rapid and high-fidelity qubit reset is essential for quantum state initialization and quantum error correction. Conventional reset protocols for superconducting qubits often rely on dissipative elements connected to external circuitry, exposing qubits to thermal noise from higher-temperature environments. Here, we experimentally demonstrate a scalable approach to qubit reset and leakage removal over multiple transmon qubits using dedicated dissipation units comprising resonators coupled to on-chip resistive loads. This architecture provides Purcell protection while isolating the qubits from warmer external circuitry. We achieve a median reset time constant of approximately 48 ns for the ∣g⟩−∣e⟩|g\rangle-|e\rangle∣g⟩−∣e⟩ transition, with an effective bath temperature of 30 mK. A 400-ns reset pulse yields residual excited-state populations of 0.29%0.29\%0.29% and 0.67%0.67\%0.67% for qubits initialized in ∣g⟩|g\rangle∣g⟩ and ∣e⟩|e\rangle∣e⟩, respectively. We further demonstrate efficient leakage removal from the ∣f⟩|f\rangle∣f⟩ state, reducing its residual population to 0.51%0.51\%0.51%. These results establish a simple, reproducible, and easy-to-integrate approach to dissipation engineering in superconducting quantum processors.
We introduce a finite-time protocol that thermalizes a quantum harmonic oscillator, initially in its ground state, without requiring a macroscopic bath. The method uses a second oscillator as an effective environment and implements sudden quenches of the oscillator frequencies and coupling. Owing to the Gaussian nature of the dynamics, the thermalization condition reduces to three solvable equations, yielding exact analytic solutions for a dense discrete set of temperatures and numerical solutions in all other cases. Any target temperature can be approximated with arbitrary precision, with a trade-off between speed and accuracy. The simplicity of the protocol makes it a promising tool for rapid, controlled thermalization in quantum thermodynamics experiments and state preparation.
Abstract We determine how to optimally reset a superconducting qubit which interacts with a thermal environment in such a way that the coupling strength is tunable. Describing the system in terms of a time-local master equation with time-dependent decay rates and using quantum optimal control theory, we identify temporal shapes of tunable level splittings which maximize the efficiency of the reset protocol in terms of duration and error. Time-dependent level splittings imply a modification of the system-environment coupling, varying the decay rates as well as the Lindblad operators. Our approach thus demonstrates efficient reservoir engineering employing quantum optimal control. We find the optimized reset strategy to consist in maximizing the decay rate from one state and driving non-adiabatic population transfer into this strongly decaying state.
Engineered dissipation provides a powerful route to controlling and stabilizing quantum states in open systems. Superconducting circuits are particularly suited to this approach due to their tunable coupling to dissipative environments. Here we realize programmable local reservoirs for superconducting qubits through parametrically driven coupling to readout resonators, creating energy-selective incoherent pump and loss. Using coupled superconducting qubits, we autonomously stabilize entangled single-excitation states with fidelity up to 90.8%. We probe the stabilization dynamics under varying initial conditions and bath parameters, and implement robust classical shadow estimation for accurate and scalable state characterization. Finally, we numerically study a configuration where the engineered pump and loss share a common dissipative mode, leading to reservoir-mediated interference and classically correlated steady states. Our results demonstrate a scalable and hardware-efficient framework for dissipative preparation and control of correlated many-body states in superconducting circuits.
Superconducting quantum circuits have emerged as a leading platform for building large-scale quantum computers, owing to their ability to engineer strong, highly tunable interactions. However, achieving high-fidelity quantum operations requires overcoming the fundamental isolation-andcontrol challenge: qubits must be well-isolated from their electromagnetic environment to maintain long coherence times, yet they require strong external coupling for fast control, readout, and initialization. In current architectures, this trade-off often demands complex auxiliary circuitry that can introduce additional noise and thermal loads. This thesis presents novel circuit designs and control techniques to address the isolation-and-control challenge in superconducting transmon qubits. First, we introduce integrated on-chip filters, in particular, 𝜆/4 and 𝜆/2 transmission line filters that exhibit a stopband at the qubit frequency. This design protects the qubit from Purcell decay, yielding up to a 200-fold improvement in the energy relaxation time 𝑇1 at the stopband. To achieve fast single-qubit gates despite this isolation, we employ subharmonic driving, demonstrating sub-ten-nanosecond control and Rabi oscillations with a 12-ns pulse duration while significantly reducing the cryogenic thermal load. Building upon these static filters, we propose and experimentally demonstrate the quantum dial, a dynamically tunable band-stop filter consisting of a series array of direct-current superconducting quantum interference devices. The quantum dial enables on-demand tuning of the qubit–environment coupling, including a reduction of 𝑇1 from over 150 μs to roughly 200 ns, while introducing minimal ac Stark shifts. We demonstrate its versatility by dialing between three operational regimes: an idle state with 99.99% fidelity, a control state enabling 99.9% fidelity for 40-ns single-qubit gates at −110 dBm, and a strongly coupled state for unconditional, state-independent qubit reset. Furthermore, the quantum dial enables qubit thermometry close to the quantum-Fisherinformation bound, with a noise-equivalent temperature down to 0.6 mK/√Hz at 60 mK. Alongside the development of these dedicated control architectures, this thesis contributes to the broader framework of circuit quantum electrodynamics by advancing specific microwave engineering and characterization techniques. In particular, we explore the miniaturization of circuit footprints through the realization of compact sub-gigahertz inductor-capacitor resonators. Additionally, we contribute to the optimization of unconditional qubit reset using a single-junction quantum-circuit refrigerator, and to the advanced characterization of microwave fields via computed tomography of propagating microwave photons. In summary, these results demonstrate fixed and tunable drive-line filters that suppress idle-state radiative decay while preserving selected control, reset, and thermometry operations. By replacing static coupling compromises with temporally programmable environments, these architectures offer a promising route to reducing noise, mitigating crosstalk, and accelerating error-correction cycles in future superconducting quantum processors.
Fast qubit reset is essential for qubit reuse in the noisy intermediate-scale quantum computing era, yet it conflicts with the weak decoherence required for high-fidelity computation. We solve the time-optimal reset problem for a frequency-tunable qubit coupled to a structural environment under realistic spectral and control constraints. The optimal strategy consists of a switch--restore--switch sequence, where the qubit is moved from a low-decoherence computational configuration to a high-decoherence restoring configuration and then returned for reuse. For superconducting qubits in four representative environments, this strategy reduces the reset time from typically $\gtrsim\SI{100}{\nano\second}$ to $\SI{20}{\nano\second}$, about 40%40\%40% of a typical two-qubit gate time, while achieving a reset precision of 10−510^{-5}10−5. Our results identify environmental spectral structure as a practical resource for rapid, high-fidelity qubit reset and provide a design principle for qubit reuse on qubit-limited processors.