Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1611.04691 · Physical Review Letters

Nanoscale Vector dc Magnetometry via Ancilla-Assisted Frequency Up-Conversion

Yi-Xiang Liu, Ashok Ajoy, Paola Cappellaro

Published Mar 13, 2019• 64 citations
arXivHTMLPDF

Abstract

Sensing static magnetic fields with high sensitivity and spatial resolution is critical to many applications in fundamental physics, bioimaging, and materials science. Even more beneficial would be full vector magnetometry with nanoscale spatial resolution. Several versatile magnetometry platforms have emerged over the past decade, such as electronic spins associated with nitrogen vacancy (NV) centers in diamond. Achieving vector magnetometry has, however, often required using an ensemble of sensors or degrading the sensitivity. Here we introduce a hybrid magnetometry platform, consisting of a sensor and an ancillary qubit, that allows vector magnetometry of static fields. While more generally applicable, we demonstrate the method for an electronic NV sensor and a nuclear spin qubit. In particular, sensing transverse fields relies on frequency up-conversion of the dc fields through the ancillary qubit, allowing quantum lock-in detection with low-frequency noise rejection. In combination with the Ramsey detection of longitudinal fields, our frequency up-conversion scheme delivers a sensitive technique for vector dc magnetometry at the nanoscale.

DOI
10.1103/physrevlett.122.100501

Related papers

Novel Magnetic-Sensing Modalities with Nitrogen-Vacancy Centers in Diamond

Huijie Zheng, Arne Wickenbrock, Georgios Chatzidrosos +16 more

In modern-day quantum metrology, quantum sensors are widely employed to detect weak magnetic fields or nanoscale signals. Quantum devices, exploiting quantum coherence, are inevitably connected to physical constants and can achieve accuracy, repeatability, and precision approaching fundamental limits. As a result, these sensors have shown utility in a wide range of research domains spanning both science and technology. A rapidly emerging quantum sensing platform employs atomic-scale defects in crystals. In particular, magnetometry using nitrogen-vacancy (NV) color centers in diamond has garnered increasing interest. NV systems possess a combination of remarkable properties, optical addressability, long coherence times, and biocompatibility. Sensors based on NV centers excel in spatial resolution and magnetic sensitivity. These diamond-based sensors promise comparable combination of high spatial resolution and magnetic sensitivity without cryogenic operation. The above properties of NV magnetometers promise increasingly integrated quantum measurement technology, as a result, they have been extensively developed with various protocols and find use in numerous applications spanning materials characterization, nuclear magnetic resonance (NMR), condensed matter physics, paleomagnetism, neuroscience and living systems biology, and industrial vector magnetometry. In this chapter, NV centers are explored for magnetic sensing in a number of contexts. In general, we introduce novel regimes for magnetic-field probes with NV ensembles. Specifically, NV centers are developed for sensitive magnetometers for applications where microwaves (MWs) are prohibitively invasive and operations need to be carried out under zero ambient magnetic field. The primary goal of our discussion is to improve the utility of these NV center-based magnetometers.

IntechOpen eBooks•Feb 8, 2021•1 citation

QUANTUM CONTROL OF SPINS AND PHOTONS AT NANOSCALES

Paola Cappellaro, J. M. MAZE, Lilian Childress +12 more

The detection of weak magnetic fields with high spatial resolution is an outstanding problem in diverse areas ranging from fundamental physics and material science to data storage and bio-imaging. Here we describe a new approach to magnetometry that takes advantage of recently developed techniques for coherent control of solid-state spin qubits. We experimentally demonstrate this novel magnetometer employing an individual electronic spin associated with a Nitrogen-Vacancy (NV) center in diamond. Using an ultra-pure diamond sample, we achieve shot-noise-limited detection of nanotesla magnetic fields at kHz frequencies after 100 seconds of averaging. In addition, we demonstrate sensitivity for a diamond nanocrystal with a volume of (30 nm) 3 . This magnetic sensor provides an unprecedented combination of high sensitivity and spatial resolution – potentially allowing for the detection of a single nuclear spin's precession within one second.

International Conference on Atomic Physics (ICAP)•Mar 1, 2009•0 citations

Microscale fiber-integrated vector magnetometer with on-tip field biasing using N - V ensembles in diamond microcrystals

Jonas Homrighausen, Frederik Hoffmann, Jens Pogorzelski +2 more

In quantum sensing of magnetic fields, ensembles of nitrogen-vacancy centers in diamond offer high sensitivity, high bandwidth and outstanding spatial resolution while operating in harsh environments. Moreover, the orientation of defect centers along four crystal axes forms an intrinsic coordinate system, enabling vector magnetometry within a single diamond crystal. While most vector magnetometers rely on a known bias magnetic field for full recovery of three-dimensional (3D) field information, employing external 3D Helmholtz coils or permanent magnets results in bulky, laboratory-bound setups, impeding miniaturization of the device. Here, a novel approach is presented that utilizes a fiber-integrated microscale coil at the fiber tip to generate a localized uniaxial magnetic field. The same fiber-tip coil is used in parallel for spin control by combining dc and microwave signals in a bias tee. To implement vector magnetometry using a uniaxial bias field, the orientation of the diamond crystal is preselected and then fully characterized by rotating a static magnetic field in three planes of rotation. The measurement of vector magnetic fields in the full solid angle is demonstrated with a shot-noise-limited sensitivity of 19.4 nT/Hz 1 / 2 and microscale spatial resolution while achieving a fiber sensor head cross section of less than 1 mm 2 . Published by the American Physical Society 2024

arXiv:2404.14089•Physical Review Applied•Sep 12, 2024•14 citations

Microwave-Free Vector Magnetometry with Nitrogen-Vacancy Centers along a Single Axis in Diamond

Huijie Zheng, Zhiyin Sun, Georgios Chatzidrosos +8 more

Sensing vector magnetic fields is important to many applications in fundamental physics, bioimaging, and materials science. Sensors exploiting nitrogen-vacancy (N-$V$) centers typically interrogate N-$V$ ensembles oriented in all directions, thwarting nanoscale spatial resolution. Utilizing the level anticrossing in the triplet ground state, the authors demonstrate a $m\phantom{\rule{0}{0ex}}i\phantom{\rule{0}{0ex}}c\phantom{\rule{0}{0ex}}r\phantom{\rule{0}{0ex}}o\phantom{\rule{0}{0ex}}w\phantom{\rule{0}{0ex}}a\phantom{\rule{0}{0ex}}v\phantom{\rule{0}{0ex}}e\ensuremath{-}f\phantom{\rule{0}{0ex}}r\phantom{\rule{0}{0ex}}e\phantom{\rule{0}{0ex}}e$ vector magnetometer that simultaneously measures all Cartesian components of the field, offering wide-band operation and high, equal sensitivity in all directions. This technique may work for single N-$V$ centers as well as ensembles, extending vector measurements to the nanoscale, at ambient temperatures.

arXiv:1904.04361•Physical Review Applied•Apr 9, 2020•80 citations

Intrinsic Vectorial Gradiometry via Quantum Control of a Spin-based Sensor

Jaime García Oliván, Pablo Acedo, Oliver T. Whaites +1 more

Gradiometry provides a versatile alternative to passive environmental shielding in quasi-static magnetometry, effectively suppressing background noise through differential signal extraction. Nevertheless, traditional implementations rely on multi-sensor architectures restricted to spatial gradients, where subtracting signals from independent detectors involves imperfect suppression of common-mode noise and artifacts, limiting their sensitivity. To overcome these limitations, we introduce a quantum control sequence that enables intrinsic temporal and spatial vectorial gradiometry of magnetic fields using a single quantum sensor. Our method provides direct access to first and higher-order derivatives of the magnetic field and extended applicability via auxiliary nuclear spin memory. We showcase this protocol on an ensemble of nitrogen-vacancy (NV) centers in diamond and combine it with mechanical control to realize high-precision differential sensing. Through detailed numerical simulations, we demonstrate the performance of our scheme in two critical DC magnetometry applications: (i) vector magnetic anomaly detection and (ii) non-invasive gradiometry of neuronal action potentials.

quant-pharXiv:2609.21776•Sep 21, 2026•0 citations

Microscale fiber-integrated vector magnetometer with on-tip field biasing using N-V ensembles in diamond microcrystals

Jonas Homrighausen, Frederik Hoffmann, Jens Pogorzelski +2 more

In quantum sensing of magnetic fields, ensembles of nitrogen-vacancy centers in diamond offer high sensitivity, high bandwidth and outstanding spatial resolution while operating in harsh environments. Moreover, the orientation of defect centers along four crystal axes forms an intrinsic coordinate system, enabling vector magnetometry within a single diamond crystal. While most vector magnetometers rely on a known bias magnetic field for full recovery of three-dimensional (3D) field information, employing external 3D Helmholtz coils or permanent magnets results in bulky, laboratory-bound setups, impeding miniaturization of the device. Here, a novel approach is presented that utilizes a fiber-integrated microscale coil at the fiber tip to generate a localized uniaxial magnetic field. The same fiber-tip coil is used in parallel for spin control by combining dc and microwave signals in a bias tee. To implement vector magnetometry using a uniaxial bias field, the orientation of the diamond crystal is preselected and then fully characterized by rotating a static magnetic field in three planes of rotation. The measurement of vector magnetic fields in the full solid angle is demonstrated with a shot-noise-limited sensitivity of 19.4 nT/Hz 1/2 and microscale spatial resolution while achieving a fiber sensor head cross section of less than 1 mm2

•Mar 18, 2026•0 citations
Sensing static magnetic fields with high sensitivity and spatial resolution is critical to many applications in fundamental physics, bioimaging, and materials science. Even more beneficial would be full vector magnetometry with nanoscale spatial resolution. Several versatile magnetometry platforms have emerged over the past decade, such as electronic spins associated with nitrogen vacancy (NV) centers in diamond. Achieving vector magnetometry has, however, often required using an ensemble of sensors or degrading the sensitivity. Here we introduce a hybrid magnetometry platform, consisting of a sensor and an ancillary qubit, that allows vector magnetometry of static fields. While more generally applicable, we demonstrate the method for an electronic NV sensor and a nuclear spin qubit. In particular, sensing transverse fields relies on frequency up-conversion of the dc fields through the ancillary qubit, allowing quantum lock-in detection with low-frequency noise rejection. In combination with the Ramsey detection of longitudinal fields, our frequency up-conversion scheme delivers a sensitive technique for vector dc magnetometry at the nanoscale.
In modern-day quantum metrology, quantum sensors are widely employed to detect weak magnetic fields or nanoscale signals. Quantum devices, exploiting quantum coherence, are inevitably connected to physical constants and can achieve accuracy, repeatability, and precision approaching fundamental limits. As a result, these sensors have shown utility in a wide range of research domains spanning both science and technology. A rapidly emerging quantum sensing platform employs atomic-scale defects in crystals. In particular, magnetometry using nitrogen-vacancy (NV) color centers in diamond has garnered increasing interest. NV systems possess a combination of remarkable properties, optical addressability, long coherence times, and biocompatibility. Sensors based on NV centers excel in spatial resolution and magnetic sensitivity. These diamond-based sensors promise comparable combination of high spatial resolution and magnetic sensitivity without cryogenic operation. The above properties of NV magnetometers promise increasingly integrated quantum measurement technology, as a result, they have been extensively developed with various protocols and find use in numerous applications spanning materials characterization, nuclear magnetic resonance (NMR), condensed matter physics, paleomagnetism, neuroscience and living systems biology, and industrial vector magnetometry. In this chapter, NV centers are explored for magnetic sensing in a number of contexts. In general, we introduce novel regimes for magnetic-field probes with NV ensembles. Specifically, NV centers are developed for sensitive magnetometers for applications where microwaves (MWs) are prohibitively invasive and operations need to be carried out under zero ambient magnetic field. The primary goal of our discussion is to improve the utility of these NV center-based magnetometers.
The detection of weak magnetic fields with high spatial resolution is an outstanding problem in diverse areas ranging from fundamental physics and material science to data storage and bio-imaging. Here we describe a new approach to magnetometry that takes advantage of recently developed techniques for coherent control of solid-state spin qubits. We experimentally demonstrate this novel magnetometer employing an individual electronic spin associated with a Nitrogen-Vacancy (NV) center in diamond. Using an ultra-pure diamond sample, we achieve shot-noise-limited detection of nanotesla magnetic fields at kHz frequencies after 100 seconds of averaging. In addition, we demonstrate sensitivity for a diamond nanocrystal with a volume of (30 nm) 3 . This magnetic sensor provides an unprecedented combination of high sensitivity and spatial resolution – potentially allowing for the detection of a single nuclear spin's precession within one second.
In quantum sensing of magnetic fields, ensembles of nitrogen-vacancy centers in diamond offer high sensitivity, high bandwidth and outstanding spatial resolution while operating in harsh environments. Moreover, the orientation of defect centers along four crystal axes forms an intrinsic coordinate system, enabling vector magnetometry within a single diamond crystal. While most vector magnetometers rely on a known bias magnetic field for full recovery of three-dimensional (3D) field information, employing external 3D Helmholtz coils or permanent magnets results in bulky, laboratory-bound setups, impeding miniaturization of the device. Here, a novel approach is presented that utilizes a fiber-integrated microscale coil at the fiber tip to generate a localized uniaxial magnetic field. The same fiber-tip coil is used in parallel for spin control by combining dc and microwave signals in a bias tee. To implement vector magnetometry using a uniaxial bias field, the orientation of the diamond crystal is preselected and then fully characterized by rotating a static magnetic field in three planes of rotation. The measurement of vector magnetic fields in the full solid angle is demonstrated with a shot-noise-limited sensitivity of 19.4 nT/Hz 1 / 2 and microscale spatial resolution while achieving a fiber sensor head cross section of less than 1 mm 2 . Published by the American Physical Society 2024
Sensing vector magnetic fields is important to many applications in fundamental physics, bioimaging, and materials science. Sensors exploiting nitrogen-vacancy (N-VVV) centers typically interrogate N-VVV ensembles oriented in all directions, thwarting nanoscale spatial resolution. Utilizing the level anticrossing in the triplet ground state, the authors demonstrate a $m\phantom{\rule{0}{0ex}}i\phantom{\rule{0}{0ex}}c\phantom{\rule{0}{0ex}}r\phantom{\rule{0}{0ex}}o\phantom{\rule{0}{0ex}}w\phantom{\rule{0}{0ex}}a\phantom{\rule{0}{0ex}}v\phantom{\rule{0}{0ex}}e\ensuremath{-}f\phantom{\rule{0}{0ex}}r\phantom{\rule{0}{0ex}}e\phantom{\rule{0}{0ex}}e$ vector magnetometer that simultaneously measures all Cartesian components of the field, offering wide-band operation and high, equal sensitivity in all directions. This technique may work for single N-VVV centers as well as ensembles, extending vector measurements to the nanoscale, at ambient temperatures.
Gradiometry provides a versatile alternative to passive environmental shielding in quasi-static magnetometry, effectively suppressing background noise through differential signal extraction. Nevertheless, traditional implementations rely on multi-sensor architectures restricted to spatial gradients, where subtracting signals from independent detectors involves imperfect suppression of common-mode noise and artifacts, limiting their sensitivity. To overcome these limitations, we introduce a quantum control sequence that enables intrinsic temporal and spatial vectorial gradiometry of magnetic fields using a single quantum sensor. Our method provides direct access to first and higher-order derivatives of the magnetic field and extended applicability via auxiliary nuclear spin memory. We showcase this protocol on an ensemble of nitrogen-vacancy (NV) centers in diamond and combine it with mechanical control to realize high-precision differential sensing. Through detailed numerical simulations, we demonstrate the performance of our scheme in two critical DC magnetometry applications: (i) vector magnetic anomaly detection and (ii) non-invasive gradiometry of neuronal action potentials.
In quantum sensing of magnetic fields, ensembles of nitrogen-vacancy centers in diamond offer high sensitivity, high bandwidth and outstanding spatial resolution while operating in harsh environments. Moreover, the orientation of defect centers along four crystal axes forms an intrinsic coordinate system, enabling vector magnetometry within a single diamond crystal. While most vector magnetometers rely on a known bias magnetic field for full recovery of three-dimensional (3D) field information, employing external 3D Helmholtz coils or permanent magnets results in bulky, laboratory-bound setups, impeding miniaturization of the device. Here, a novel approach is presented that utilizes a fiber-integrated microscale coil at the fiber tip to generate a localized uniaxial magnetic field. The same fiber-tip coil is used in parallel for spin control by combining dc and microwave signals in a bias tee. To implement vector magnetometry using a uniaxial bias field, the orientation of the diamond crystal is preselected and then fully characterized by rotating a static magnetic field in three planes of rotation. The measurement of vector magnetic fields in the full solid angle is demonstrated with a shot-noise-limited sensitivity of 19.4 nT/Hz 1/2 and microscale spatial resolution while achieving a fiber sensor head cross section of less than 1 mm2