Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1610.03538

Gaussian quantum metrology and space-time probes

Dominik Šafránek

Published Oct 11, 2016• 6 citations
arXivHTMLPDF

Abstract

In this thesis we focus on Gaussian quantum metrology in the phase-space formalism and its applications in quantum sensing and the estimation of space-time parameters. We derive new formulae for the optimal estimation of multiple parameters encoded into Gaussian states. We discuss the discontinuous behavior of the figure of merit - the quantum Fisher information. Using derived expressions we devise a practical method of finding optimal probe states for the estimation of Gaussian channels and we illustrate this method on several examples. We show that the temperature of a probe state affects the estimation generically and always appears in the form of four multiplicative factors. We also discuss how well squeezed thermal states perform in the estimation of space-time parameters. Finally we study how the estimation precision changes when two parties exchanging a quantum state with the encoded parameter do not share a reference frame. We show that using a quantum reference frame could counter this effect.

DOI
10.48550/arxiv.1610.03538

Related papers

Multiparameter Gaussian quantum metrology

Rosanna Nichols, Pietro Liuzzo-Scorpo, Paul A. Knott +1 more

We investigate the ultimate precision achievable in Gaussian quantum metrology. We derive general analytical expressions for the quantum Fisher information matrix and for the measurement compatibility condition, ensuring asymptotic saturability of the quantum Cram\'er-Rao bound, for the estimation of multiple parameters encoded in multimode Gaussian states. We then apply our results to the joint estimation of a phase shift and two parameters characterizing Gaussian phase covariant noise in optical interferometry. In such a scheme, we show that two-mode displaced squeezed input probes with optimally tuned squeezing and displacement fulfill the measurement compatibility condition and enable the simultaneous estimation of all three parameters, with an advantage over individual estimation schemes that quickly rises with increasing mean energy of the probes.

arXiv:1711.09132•Physical Review A•Jul 11, 2018•137 citations

Gaussian quantum metrology for mode-encoded parameters

Giacomo Sorelli, Manuel Gessner, Nicolas Treps +1 more

Abstract Quantum optical metrology aims to identify ultimate sensitivity bounds for the estimation of parameters encoded into quantum states of the electromagnetic field. In many practical applications, including imaging, microscopy, and remote sensing, the parameter of interest is not only encoded in the quantum state of the field, but also in its spatio-temporal distribution, i.e. in its mode structure. In this mode-encoded parameter estimation setting, we derive an analytical expression for the quantum Fisher information valid for arbitrary multimode Gaussian fields. To illustrate the power of our approach, we apply our results to the estimation of the transverse displacement of a beam and to the temporal separation between two pulses. For these examples, we show how the estimation sensitivity can be enhanced by adding squeezing into specific modes.

arXiv:2202.10355•New Journal of Physics•Jul 1, 2024•10 citations

Probing parameters estimation with Gaussian non-commutative measurements

Alice P. G. Hall, Carlos H. S. Vieira, Jonas F. G. Santos

Gaussian quantum states and channels are pivotal across many branches of quantum science and their applications, including the processing and storage of quantum information, the investigation of thermodynamics in the quantum regime, and quantum computation. The great advantage is that Gaussian states are experimentally accessible via their first and second statistical moments. In this work, we investigate parameter estimation for Gaussian states, in which the probe-state preparation stage involves two noncommutative Gaussian measurements on the position and momentum observables, introducing tunable parameters. The influence of these noncommutative Gaussian measurements is investigated through the quantum Fisher information (QFI). We showed that the QFI for characterizing Gaussian channels can be increased by adjusting the uncertainty parameters in the preparation of the probe state. Furthermore, if the probe is initially in a thermal state, probe-state preparation may generate quantum coherence in its energy basis. We showed that not only does the amount of coherence affect the improvement of the QFI, but also the rate of change of the coherence with respect to the parameter to be estimated. The proposed probe-state protocol is applied to two paradigmatic single-mode Gaussian channels, the attenuator and amplification channels, which are building blocks of Gaussian quantum information. Our results contribute to the use of coherence in quantum metrology and are experimentally feasible in quantum-optical devices.

quant-pharXiv:2511.13451•The European Physical Journal Plus•Nov 18, 2025•1 citation

Improving parameter estimation in Gaussian channels using quantum coherence

Jonas F. G. Santos, Carlos H. S. Vieira, Wilder R. Cardoso

Gaussian quantum channels are relevant operations in continuous variable systems. In general, given an arbitrary state, the action on it is well known, provided that the quantum channels are completely characterized. In this work, we have studied the role played by quantum coherence in the estimation of Gaussian channel parameters. For this purpose, we start by considering an initial single-mode vacuum state where coherence is generated through displaced or/and squeezing operations. Then, we consider a probe state with two resources, the average thermal number and the quantum coherence. The results are computed using the quantum Fisher information (QFI) as well as some gain functions defined in the work. We applied the estimation protocol for two paradigmatic bosonic Gaussian channels: the thermal attenuator and the thermal amplifier. Our results show that for the vacuum initial state, coherence can be exploited to obtain a high QFI. Moreover, we can state two important facts: the first being that for a small parameter region of a channel, the QFI depends on the mechanism used to generate the coherence, while the second is that the QFI depends not only on the amount of coherence but also on how it changes as a function of the parameter to be estimated. For the probe state, including also an average thermal number, the two examples show that thermal resources are not always beneficial to the QFI and that this depends on the channel structure. For the attenuator channel, the optimal probe state is only limited by the ability to implement an average thermal number and generate an amount of coherence, while for the amplifier channel, the vacuum probe state with coherence is the optimal state. Finally, we obtain a direct relation between the quantum Fisher information and the relative entropy of coherence, allowing, in principle, an experimental verification based on the measurement of the covariance matrix of the probe system.

arXiv:2409.09675•Physical Review A•May 2, 2025•14 citations

Quantum accuracy limits and benchmarks in continuous variable systems

Mariona Aspachs

In this thesis I study optimal strategies to estimate or characterize quantum states and processes (quantum channels). I consider the problem of estimating a phase encoded on a gaussian state. Phase estimation is at the heart of many quantum metrology applications, such as gravitational wave detectors or clock synchronization. I address the problem to the phase estimation fidelity for pure and mixed gaussian states and study how temperature affects the precision of estimation. Although the case of pure states has been studied before, very little is known about estimation in mixed states. The interest in mixed gaussian states relies on the fact that these are the states one has in real experiments with light due to the unavoidable presence of noise. Displaced and squeezed thermal states are studied. For the case of displaced states, I find that fidelity estimation gets worse when the temperature increases. On the contrary, for squeezed thermal states I find the surprising result that a larger temperature yields better estimation. This apparently paradoxical feature, also appears when I derive the estimation accuracy that can be obtained when an asymptotically large number of copies of the state is available. I also study quantum benchmarks that can be applied to a wide variety of protocols, such us quantum storage or quantum teleportation. A very important question in QIT is to know whether a particular quantum protocol can be realized by classical means with the same efficiency. After all, QIT lives from the promise of this quantum advantage. This question becomes specially relevant in experimental (real) implementations of quantum schemes. In real experiments there are always losses and the ideal quantum protocols become imperfect. It is then necessary to assess whether the same experimental result could be obtained by classical (less costly) means. So, for example, in a particular teleportation experiment -which involves generation of entanglement, complicated Bell measurements, fighting decoherence, etc.- one might ask whether one could achieve the same (i.e. mapping the state of a system to a second system located in a different place or time) by measuring the system, transmitting the collected information to the other location, and finally preparing the system accordingly. It is hence of paramount importance to give bounds on the efficiency of these measure and prepare (or entanglement breaking) channels. For this purpose we propose a threshold based on a phase-covariant family of states. Besides of being a family with a straightforward group-theoretical structure, which gives obvious computational advantages, this family is interesting because it can be tested experimentally also in a straightforward way. A crucial feature for the practical use of our benchmark is that it does not require pure (ideal) input states. I finally consider the problem of estimating the parameter of the amplification channel. The amplification channel is interesting by itself but also by the fact that the Hawking-Unruh effect can be formally modeled by it. The Unruh-Hawking effect is a relativistic effect and as such it is hard to measure and detect in current experiments. I investigate whether quantum strategies can provide an improvement over classical protocols in the estimation of the amplification parameter. If the field is inertially prepared in the vacuum one could measure its temperature as detected by a noninertial observer and extract information about the parameter. But I would like to know if the vacuum state is the optimal probe state in an inertial frame for such a task or a better sensitivity could be achieved if the field were in a state of nonzero energy (mean photon number) from an inertial perspective. The aim is to determine the optimal input states, so that, by optimally measuring the output, one can construct an estimator for amplification channel parameter which is unbiased and has the minimum possible variance.

•Jan 1, 2011•0 citations

Optimal probe states for the estimation of Gaussian unitary channels

Dominik Šafránek, Ivette Fuentes

We construct a practical method for finding optimal Gaussian probe states for the estimation of parameters encoded by Gaussian unitary channels. This method can be used for finding all optimal probe states, rather than focusing on the performance of specific states as shown in previous studies. As an example, we apply this method to find optimal probes for the channel that combines the phase-change and squeezing channels, and for generalized two-mode squeezing and mode-mixing channels. The method enables a comprehensive study of temperature effects in Gaussian parameter estimation. It has been shown that the precision in parameter estimation using single-mode states can be enhanced by increasing the temperature of the probe. We show that not only higher temperature, but also larger temperature differences between modes of a Gaussian probe state can enhance the estimation precision.

arXiv:1603.05545•Physical Review A•Dec 12, 2016•92 citations
In this thesis we focus on Gaussian quantum metrology in the phase-space formalism and its applications in quantum sensing and the estimation of space-time parameters. We derive new formulae for the optimal estimation of multiple parameters encoded into Gaussian states. We discuss the discontinuous behavior of the figure of merit - the quantum Fisher information. Using derived expressions we devise a practical method of finding optimal probe states for the estimation of Gaussian channels and we illustrate this method on several examples. We show that the temperature of a probe state affects the estimation generically and always appears in the form of four multiplicative factors. We also discuss how well squeezed thermal states perform in the estimation of space-time parameters. Finally we study how the estimation precision changes when two parties exchanging a quantum state with the encoded parameter do not share a reference frame. We show that using a quantum reference frame could counter this effect.
We investigate the ultimate precision achievable in Gaussian quantum metrology. We derive general analytical expressions for the quantum Fisher information matrix and for the measurement compatibility condition, ensuring asymptotic saturability of the quantum Cram\'er-Rao bound, for the estimation of multiple parameters encoded in multimode Gaussian states. We then apply our results to the joint estimation of a phase shift and two parameters characterizing Gaussian phase covariant noise in optical interferometry. In such a scheme, we show that two-mode displaced squeezed input probes with optimally tuned squeezing and displacement fulfill the measurement compatibility condition and enable the simultaneous estimation of all three parameters, with an advantage over individual estimation schemes that quickly rises with increasing mean energy of the probes.
Abstract Quantum optical metrology aims to identify ultimate sensitivity bounds for the estimation of parameters encoded into quantum states of the electromagnetic field. In many practical applications, including imaging, microscopy, and remote sensing, the parameter of interest is not only encoded in the quantum state of the field, but also in its spatio-temporal distribution, i.e. in its mode structure. In this mode-encoded parameter estimation setting, we derive an analytical expression for the quantum Fisher information valid for arbitrary multimode Gaussian fields. To illustrate the power of our approach, we apply our results to the estimation of the transverse displacement of a beam and to the temporal separation between two pulses. For these examples, we show how the estimation sensitivity can be enhanced by adding squeezing into specific modes.
Gaussian quantum states and channels are pivotal across many branches of quantum science and their applications, including the processing and storage of quantum information, the investigation of thermodynamics in the quantum regime, and quantum computation. The great advantage is that Gaussian states are experimentally accessible via their first and second statistical moments. In this work, we investigate parameter estimation for Gaussian states, in which the probe-state preparation stage involves two noncommutative Gaussian measurements on the position and momentum observables, introducing tunable parameters. The influence of these noncommutative Gaussian measurements is investigated through the quantum Fisher information (QFI). We showed that the QFI for characterizing Gaussian channels can be increased by adjusting the uncertainty parameters in the preparation of the probe state. Furthermore, if the probe is initially in a thermal state, probe-state preparation may generate quantum coherence in its energy basis. We showed that not only does the amount of coherence affect the improvement of the QFI, but also the rate of change of the coherence with respect to the parameter to be estimated. The proposed probe-state protocol is applied to two paradigmatic single-mode Gaussian channels, the attenuator and amplification channels, which are building blocks of Gaussian quantum information. Our results contribute to the use of coherence in quantum metrology and are experimentally feasible in quantum-optical devices.
Gaussian quantum channels are relevant operations in continuous variable systems. In general, given an arbitrary state, the action on it is well known, provided that the quantum channels are completely characterized. In this work, we have studied the role played by quantum coherence in the estimation of Gaussian channel parameters. For this purpose, we start by considering an initial single-mode vacuum state where coherence is generated through displaced or/and squeezing operations. Then, we consider a probe state with two resources, the average thermal number and the quantum coherence. The results are computed using the quantum Fisher information (QFI) as well as some gain functions defined in the work. We applied the estimation protocol for two paradigmatic bosonic Gaussian channels: the thermal attenuator and the thermal amplifier. Our results show that for the vacuum initial state, coherence can be exploited to obtain a high QFI. Moreover, we can state two important facts: the first being that for a small parameter region of a channel, the QFI depends on the mechanism used to generate the coherence, while the second is that the QFI depends not only on the amount of coherence but also on how it changes as a function of the parameter to be estimated. For the probe state, including also an average thermal number, the two examples show that thermal resources are not always beneficial to the QFI and that this depends on the channel structure. For the attenuator channel, the optimal probe state is only limited by the ability to implement an average thermal number and generate an amount of coherence, while for the amplifier channel, the vacuum probe state with coherence is the optimal state. Finally, we obtain a direct relation between the quantum Fisher information and the relative entropy of coherence, allowing, in principle, an experimental verification based on the measurement of the covariance matrix of the probe system.
In this thesis I study optimal strategies to estimate or characterize quantum states and processes (quantum channels). I consider the problem of estimating a phase encoded on a gaussian state. Phase estimation is at the heart of many quantum metrology applications, such as gravitational wave detectors or clock synchronization. I address the problem to the phase estimation fidelity for pure and mixed gaussian states and study how temperature affects the precision of estimation. Although the case of pure states has been studied before, very little is known about estimation in mixed states. The interest in mixed gaussian states relies on the fact that these are the states one has in real experiments with light due to the unavoidable presence of noise. Displaced and squeezed thermal states are studied. For the case of displaced states, I find that fidelity estimation gets worse when the temperature increases. On the contrary, for squeezed thermal states I find the surprising result that a larger temperature yields better estimation. This apparently paradoxical feature, also appears when I derive the estimation accuracy that can be obtained when an asymptotically large number of copies of the state is available. I also study quantum benchmarks that can be applied to a wide variety of protocols, such us quantum storage or quantum teleportation. A very important question in QIT is to know whether a particular quantum protocol can be realized by classical means with the same efficiency. After all, QIT lives from the promise of this quantum advantage. This question becomes specially relevant in experimental (real) implementations of quantum schemes. In real experiments there are always losses and the ideal quantum protocols become imperfect. It is then necessary to assess whether the same experimental result could be obtained by classical (less costly) means. So, for example, in a particular teleportation experiment -which involves generation of entanglement, complicated Bell measurements, fighting decoherence, etc.- one might ask whether one could achieve the same (i.e. mapping the state of a system to a second system located in a different place or time) by measuring the system, transmitting the collected information to the other location, and finally preparing the system accordingly. It is hence of paramount importance to give bounds on the efficiency of these measure and prepare (or entanglement breaking) channels. For this purpose we propose a threshold based on a phase-covariant family of states. Besides of being a family with a straightforward group-theoretical structure, which gives obvious computational advantages, this family is interesting because it can be tested experimentally also in a straightforward way. A crucial feature for the practical use of our benchmark is that it does not require pure (ideal) input states. I finally consider the problem of estimating the parameter of the amplification channel. The amplification channel is interesting by itself but also by the fact that the Hawking-Unruh effect can be formally modeled by it. The Unruh-Hawking effect is a relativistic effect and as such it is hard to measure and detect in current experiments. I investigate whether quantum strategies can provide an improvement over classical protocols in the estimation of the amplification parameter. If the field is inertially prepared in the vacuum one could measure its temperature as detected by a noninertial observer and extract information about the parameter. But I would like to know if the vacuum state is the optimal probe state in an inertial frame for such a task or a better sensitivity could be achieved if the field were in a state of nonzero energy (mean photon number) from an inertial perspective. The aim is to determine the optimal input states, so that, by optimally measuring the output, one can construct an estimator for amplification channel parameter which is unbiased and has the minimum possible variance.
We construct a practical method for finding optimal Gaussian probe states for the estimation of parameters encoded by Gaussian unitary channels. This method can be used for finding all optimal probe states, rather than focusing on the performance of specific states as shown in previous studies. As an example, we apply this method to find optimal probes for the channel that combines the phase-change and squeezing channels, and for generalized two-mode squeezing and mode-mixing channels. The method enables a comprehensive study of temperature effects in Gaussian parameter estimation. It has been shown that the precision in parameter estimation using single-mode states can be enhanced by increasing the temperature of the probe. We show that not only higher temperature, but also larger temperature differences between modes of a Gaussian probe state can enhance the estimation precision.