Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1607.07045 · Physical Review A

Site-resolved imaging of single atoms with a Faraday quantum gas microscope

Ryuta Yamamoto, Jun Kobayashi, Kohei Kato, Takuma Kuno, Yuto Sakura, Yoshiro Takahashi

Published Sep 8, 2017• 36 citations
arXivHTMLPDF

Abstract

We demonstrate a quantum gas microscope based on the Faraday effect that does not require a stochastic spontaneous emission process. We reveal the dispersive feature of this Faraday-imaging method by comparing the detuning dependence of the Faraday signal with that of the photon scattering rate. In addition, we determine the atom distribution through a deconvolution analysis, demonstrate absorption and dark-field Faraday imaging, and reveal the various shapes of the point spread functions for these methods, which are fully explained by a theoretical analysis. The results constitute an important first step toward ultimate quantum nondemolition site-resolved imaging and open the way to quantum feedback control of a quantum many-body system with single-site resolution.

DOI
10.1103/physreva.96.033610

Related papers

Quantum point spread function for imaging trapped few-body systems with a quantum gas microscope

Maxim Pyzh, Sven Krönke, Christof Weitenberg +1 more

Abstract Quantum gas microscopes, which image the atomic occupations in an optical lattice, have opened a new avenue to the exploration of many-body lattice systems. Imaging trapped systems after freezing the density distribution by ramping up a pinning lattice leads, however, to a distortion of the original density distribution, especially when its structures are on the scale of the pinning lattice spacing. We show that this dynamics can be described by a filter, which we call in analogy to classical optics a quantum point spread function. Using a machine learning approach, we demonstrate via several experimentally relevant setups that a suitable deconvolution allows for the reconstruction of the original density distribution. These findings are both of fundamental interest for the theory of imaging and of immediate importance for current quantum gas experiments.

arXiv:1806.08982•New Journal of Physics•May 1, 2019•10 citations

A comparative study of deconvolution techniques for quantum-gas microscope images

Arthur La Rooij, Clemens Ulm, Elmar Haller +1 more

Abstract Quantum-gas microscopes are used to study ultracold atoms in optical lattices at the single-particle level. In these systems atoms are localised on lattice sites with separations close to or below the diffraction limit. To determine the lattice occupation with high fidelity, a deconvolution of the images is often required. We compare three different techniques, a local iterative deconvolution algorithm, Wiener deconvolution and the Lucy–Richardson algorithm, using simulated microscope images. We investigate how the reconstruction fidelity scales with varying signal-to-noise ratio, lattice filling fraction, varying fluorescence levels per atom, and imaging resolution. The results of this study identify the limits of singe-atom detection and provide quantitative fidelities which are applicable for different atomic species and quantum-gas microscope setups.

arXiv:2207.08663•New Journal of Physics•Aug 1, 2023•15 citations

Quantum-Gas Microscope for Fermionic Atoms

Lawrence W. Cheuk, Matthew A. Nichols, Melih Okan +5 more

We realize a quantum-gas microscope for fermionic ^{40}K atoms trapped in an optical lattice, which allows one to probe strongly correlated fermions at the single-atom level. We combine 3D Raman sideband cooling with high-resolution optics to simultaneously cool and image individual atoms with single-lattice-site resolution at a detection fidelity above 95%. The imaging process leaves the atoms predominantly in the 3D motional ground state of their respective lattice sites, inviting the implementation of a Maxwell's demon to assemble low-entropy many-body states. Single-site-resolved imaging of fermions enables the direct observation of magnetic order, time-resolved measurements of the spread of particle correlations, and the detection of many-fermion entanglement.

arXiv:1503.02648•Physical Review Letters•May 13, 2015•426 citations

Fluorescence Imaging of Quantum Gases

Christof Weitenberg

Quantum gases in optical lattices have proven a prolific platform to study condensed matter models such as the Bose–Hubbard model. The recently achieved in situ fluorescence imaging of low-dimensional systems has pushed the detection capabilities to a fully microscopic level. The method yields single-site and single-atom resolved images of the lattice gas in a single experimental run, thus giving direct access to fluctuations and correlation functions in the many-body system. These quantum gas microscopes have been used to study the superfluid–Mott insulator quantum phase transition at the single-atom level. Moreover, singlesite resolved addressing allows flipping the spin of individual atoms in a Mott insulator, thus deterministically creating local spin excitations whose dynamics can be observed. In this chapter, we will describe the implementation of the technique and discuss some of the obtained results.

Cold atoms•Sep 28, 2014•1 citation

Quantum-gas microscopes: a new tool for cold-atom quantum simulators

Stefan Kuhr

Imagine a new generation of computers that dramatically surpasses the most powerful supercomputers, being able to tackle the most challenging of computational problems. These problems arise, for example, in quantum physics where the computational power required to model a many-particle system increases exponentially with the number of its constituents, and as a consequence the calculations become prohibitively time-consuming. Nobel laureate Richard Feynman proposed this new type of computer in the early 1980s: ‘Let the computer itself be built of quantum mechanical elements which obey quantum mechanical laws.’ Such a quantum simulator would allow researchers to tackle challenging problems in condensed-matter physics. In particular many-body fermionic quantum systems are very difficult to compute due to the antisymmetric nature of the wave function, and the resulting sign problem for quantum Monte Carlo methods. This is why a quantum simulator will be an excellent test bed to investigate phenomena and properties of strongly correlated fermionic quantum systems. A powerful experimental platform to realize a quantum simulator is laser-cooled atoms [1] held in an artificial crystal of light, generated by superimposing laser beams. The atoms are kept in this optical lattice similar to marbles in the hollows of an egg carton, and they can mimic the behaviour of electrons in a real crystal. These systems interface atomic physics with condensed matter physics in a new way, as the tools of atomic physics allow for exquisite control of many experimental parameters, which are often inaccessible in solid state experiments. In-situ imaging techniques [2] using ‘quantum-gas microscopes’ constitute a new approach to the study of many-body quantum systems in an optical lattice with unprecedented resolution at the single-particle and single-site level [3,4]. This new method is complementary to earlier optical lattice experiments measuring distributions in momentum space after a time-of-flight expansion. A quantum-gas microscope uses an optical imaging system (Fig. 1a) for collecting the fluorescence light of ultracold atoms in an optical lattice with high spatial resolution comparable to the lattice spacing of ≈ 500 nm. (a) Atoms in optical lattice atoms are imaged with a high-resolution microscope objective [4]. (b) Single-site addressing is achieved by focussing a laser beam through the microscope onto selected atoms, bringing them into resonance with microwave radiation which produces spin flips [12]. (c) and (d) Single-atom-resolved fluorescence images of bosonic Mottinsulators [4,9]. (e) Deterministically prepared atom distribution using single-site addressing [12]. (f) Direct observation of single-atom quantum walks [15]. Fluorescence imaging of atoms in a quantum-gas microscope has made it possible to directly observe bosonic Mott insulators with single-atom resolution [4–6], giving access to in-situ measurements of temperature and entropy distributions. Subsequently, ground-breaking experiments in many-body quantum dynamics have been performed, such as the first direct observation of correlation spreading after quenches of the system to lower lattice depths [7]. Other experiments include the quantum simulation of an antiferromagnetic spin-1/2 chain [8], the realization of algorithmic cooling [9], the direct measurement of correlations across the superfluid-to-Mott-insulator transition [10], or the observation of the ‘Higgs’ amplitude mode [11]. The high-resolution imaging system is also capable of optically addressing individual atoms with sub-diffraction-limited resolution. For this purpose, a laser beam is focussed though the microscope objective onto selected lattice sites, bringing the atoms into resonance with microwave radiation which produces spin flips [12,13]. The preparation of arbitrary atom distributions in the lattice not only opens perspectives for neutral-atom quantum information processing, but also allows the deterministic creation of specific out-of-equilibrium situations, and their ensuing system dynamics can be studied with single-atom resolution. Examples include the creation of spin impurities and the study of their dynamics in a many-body system [14], the observation of quantum walks [15] and magnon-bound states [16], and the measurement of entanglement entropy [17]. The technique used for single-site-resolved detection of individual atoms in the optical lattice is fluorescence imaging. It requires laser cooling of the atoms to sub-Doppler temperatures while detecting the fluorescence photons emitted during this process. A challenge is to achieve a low particle loss rate and to prevent the atoms from hopping between lattice sites. In the case of the first quantum-gas microscopes, this has been implemented with bosonic rubidium-87 atoms, and also recently for ytterbium-174. However, it has proven more challenging for fermionic alkaline species such as potassium-40 and lithium-6, as their low mass and small excited state hyperfine splitting-prevented standard sub-Doppler cooling from working. As a result, it took several years to extend the quantum-gas microscope technique to fermionic species, and in 2015 several groups have demonstrated single-atom-resolved imaging of fermions [18]. In these setups, the direct observation of band insulators [19], fermionic Mott insulators [20,21] and even antiferromagnetic correlations [22] has been reported most recently. These developments provide fascinating opportunities to study many-body fermionic quantum systems with single-particle access. The fermionic nature of the electron is vital to understanding a range of phenomena within solid-state physics, such as electron pairing in superconductivity, and quantum magnetism. In this context, the quantum simulator will allow, e.g. for direct measurement of ordered quantum phases and out-of-equilibrium dynamics, with access to quantities such as spin--spin correlation functions and the growth of many-body entanglement. The high-resolution imaging systems could also be used to project tailored time-varying light fields onto the atoms, allowing the removal of high-entropy regions by locally modifying the confining potential to attain very low-entropy states. Attaining these low-entropy many-particle states is one of the key challenges in our field. In summary, quantum-gas microscopes offer unprecedented access to many-body quantum systems, and they will allow us to gain an even deeper insight into the intriguing world of quantum physics that governs the properties of strongly correlated materials. Using a well-controlled quantum system to simulate other quantum systems could help resolve some of the most challenging problems scientists face in condensed matter physics and materials science, but it will also provide new insights in quantum chemistry, high-energy physics and biology. SK acknowledges funding from the EU (ERC FERMILATT, SIQS, QuProCs) and SUPA.

arXiv:1606.06990•National Science Review•Apr 19, 2016•94 citations

Imaging Fermionic Atoms in a Quantum Gas Microscope

Graham J. A. Edge

This thesis describes the methods used to achieve single-atom and single-site resolved fluorescence imaging of a quantum gas of fermionic atoms held in an optical lattice. This kind of quantum gas microscopy has been previously applied to bosonic atoms in two experiments, and has allowed for extensive studies of many-body quantum systems. Here we detail methods to extend the techniques of quantum gas microscopy to fermionic species of atoms, opening the door to quantum simulation of electronic models of condensed matter physics. We prepare quantum degenerate gases of fermionic 40K through sympathetic cooling with a gas of \Rb. The gas prepared is trapped less than 1 mm away from a thin vacuum window, an experimental geometry which permits interrogation with a large Numerical Aperture microscope objective. The cloud is loaded into a 527 nm-period cubic optical lattice, ideal for quantum simulation of many-body models of fermionic particles such as the Hubbard model. The optical lattice is designed to allow for potential depths up to V/kB = 250 microKelvin, sufficient to strongly confine 40K atoms into individual lattice sites. EIT cooling --- a technique previously demonstrated in ion-trapping experiments --- is used to cool the fermionic atoms deeply towards the ground motional state of the lattice wells. We collect the photons scattered during continuous application of EIT cooling, while atoms are kept pinned in the lattice for many seconds. We strongly suppress all other sources of light with the use of a modulated cooling scheme and a spinning chopper wheel. Collecting the scattered light produced during 2 s of EIT cooling allows us to resolve single atoms in a fluorescence image. We demonstrate that the high resolution of our imaging apparatus also permits atom positions to be precisely identified on the length scale of the optical lattice. Thus we demonstrate the realisation of a quantum gas microscope for fermionic atoms, allowing for precise investigation of the ground states and dynamics of correlated quantum states of fermionic particles.

•Jun 1, 2017•0 citations
We demonstrate a quantum gas microscope based on the Faraday effect that does not require a stochastic spontaneous emission process. We reveal the dispersive feature of this Faraday-imaging method by comparing the detuning dependence of the Faraday signal with that of the photon scattering rate. In addition, we determine the atom distribution through a deconvolution analysis, demonstrate absorption and dark-field Faraday imaging, and reveal the various shapes of the point spread functions for these methods, which are fully explained by a theoretical analysis. The results constitute an important first step toward ultimate quantum nondemolition site-resolved imaging and open the way to quantum feedback control of a quantum many-body system with single-site resolution.
Abstract Quantum gas microscopes, which image the atomic occupations in an optical lattice, have opened a new avenue to the exploration of many-body lattice systems. Imaging trapped systems after freezing the density distribution by ramping up a pinning lattice leads, however, to a distortion of the original density distribution, especially when its structures are on the scale of the pinning lattice spacing. We show that this dynamics can be described by a filter, which we call in analogy to classical optics a quantum point spread function. Using a machine learning approach, we demonstrate via several experimentally relevant setups that a suitable deconvolution allows for the reconstruction of the original density distribution. These findings are both of fundamental interest for the theory of imaging and of immediate importance for current quantum gas experiments.
Abstract Quantum-gas microscopes are used to study ultracold atoms in optical lattices at the single-particle level. In these systems atoms are localised on lattice sites with separations close to or below the diffraction limit. To determine the lattice occupation with high fidelity, a deconvolution of the images is often required. We compare three different techniques, a local iterative deconvolution algorithm, Wiener deconvolution and the Lucy–Richardson algorithm, using simulated microscope images. We investigate how the reconstruction fidelity scales with varying signal-to-noise ratio, lattice filling fraction, varying fluorescence levels per atom, and imaging resolution. The results of this study identify the limits of singe-atom detection and provide quantitative fidelities which are applicable for different atomic species and quantum-gas microscope setups.
We realize a quantum-gas microscope for fermionic ^{40}K atoms trapped in an optical lattice, which allows one to probe strongly correlated fermions at the single-atom level. We combine 3D Raman sideband cooling with high-resolution optics to simultaneously cool and image individual atoms with single-lattice-site resolution at a detection fidelity above 95%. The imaging process leaves the atoms predominantly in the 3D motional ground state of their respective lattice sites, inviting the implementation of a Maxwell's demon to assemble low-entropy many-body states. Single-site-resolved imaging of fermions enables the direct observation of magnetic order, time-resolved measurements of the spread of particle correlations, and the detection of many-fermion entanglement.
Quantum gases in optical lattices have proven a prolific platform to study condensed matter models such as the Bose–Hubbard model. The recently achieved in situ fluorescence imaging of low-dimensional systems has pushed the detection capabilities to a fully microscopic level. The method yields single-site and single-atom resolved images of the lattice gas in a single experimental run, thus giving direct access to fluctuations and correlation functions in the many-body system. These quantum gas microscopes have been used to study the superfluid–Mott insulator quantum phase transition at the single-atom level. Moreover, singlesite resolved addressing allows flipping the spin of individual atoms in a Mott insulator, thus deterministically creating local spin excitations whose dynamics can be observed. In this chapter, we will describe the implementation of the technique and discuss some of the obtained results.
Imagine a new generation of computers that dramatically surpasses the most powerful supercomputers, being able to tackle the most challenging of computational problems. These problems arise, for example, in quantum physics where the computational power required to model a many-particle system increases exponentially with the number of its constituents, and as a consequence the calculations become prohibitively time-consuming. Nobel laureate Richard Feynman proposed this new type of computer in the early 1980s: ‘Let the computer itself be built of quantum mechanical elements which obey quantum mechanical laws.’ Such a quantum simulator would allow researchers to tackle challenging problems in condensed-matter physics. In particular many-body fermionic quantum systems are very difficult to compute due to the antisymmetric nature of the wave function, and the resulting sign problem for quantum Monte Carlo methods. This is why a quantum simulator will be an excellent test bed to investigate phenomena and properties of strongly correlated fermionic quantum systems. A powerful experimental platform to realize a quantum simulator is laser-cooled atoms [1] held in an artificial crystal of light, generated by superimposing laser beams. The atoms are kept in this optical lattice similar to marbles in the hollows of an egg carton, and they can mimic the behaviour of electrons in a real crystal. These systems interface atomic physics with condensed matter physics in a new way, as the tools of atomic physics allow for exquisite control of many experimental parameters, which are often inaccessible in solid state experiments. In-situ imaging techniques [2] using ‘quantum-gas microscopes’ constitute a new approach to the study of many-body quantum systems in an optical lattice with unprecedented resolution at the single-particle and single-site level [3,4]. This new method is complementary to earlier optical lattice experiments measuring distributions in momentum space after a time-of-flight expansion. A quantum-gas microscope uses an optical imaging system (Fig. 1a) for collecting the fluorescence light of ultracold atoms in an optical lattice with high spatial resolution comparable to the lattice spacing of ≈ 500 nm. (a) Atoms in optical lattice atoms are imaged with a high-resolution microscope objective [4]. (b) Single-site addressing is achieved by focussing a laser beam through the microscope onto selected atoms, bringing them into resonance with microwave radiation which produces spin flips [12]. (c) and (d) Single-atom-resolved fluorescence images of bosonic Mottinsulators [4,9]. (e) Deterministically prepared atom distribution using single-site addressing [12]. (f) Direct observation of single-atom quantum walks [15]. Fluorescence imaging of atoms in a quantum-gas microscope has made it possible to directly observe bosonic Mott insulators with single-atom resolution [4–6], giving access to in-situ measurements of temperature and entropy distributions. Subsequently, ground-breaking experiments in many-body quantum dynamics have been performed, such as the first direct observation of correlation spreading after quenches of the system to lower lattice depths [7]. Other experiments include the quantum simulation of an antiferromagnetic spin-1/2 chain [8], the realization of algorithmic cooling [9], the direct measurement of correlations across the superfluid-to-Mott-insulator transition [10], or the observation of the ‘Higgs’ amplitude mode [11]. The high-resolution imaging system is also capable of optically addressing individual atoms with sub-diffraction-limited resolution. For this purpose, a laser beam is focussed though the microscope objective onto selected lattice sites, bringing the atoms into resonance with microwave radiation which produces spin flips [12,13]. The preparation of arbitrary atom distributions in the lattice not only opens perspectives for neutral-atom quantum information processing, but also allows the deterministic creation of specific out-of-equilibrium situations, and their ensuing system dynamics can be studied with single-atom resolution. Examples include the creation of spin impurities and the study of their dynamics in a many-body system [14], the observation of quantum walks [15] and magnon-bound states [16], and the measurement of entanglement entropy [17]. The technique used for single-site-resolved detection of individual atoms in the optical lattice is fluorescence imaging. It requires laser cooling of the atoms to sub-Doppler temperatures while detecting the fluorescence photons emitted during this process. A challenge is to achieve a low particle loss rate and to prevent the atoms from hopping between lattice sites. In the case of the first quantum-gas microscopes, this has been implemented with bosonic rubidium-87 atoms, and also recently for ytterbium-174. However, it has proven more challenging for fermionic alkaline species such as potassium-40 and lithium-6, as their low mass and small excited state hyperfine splitting-prevented standard sub-Doppler cooling from working. As a result, it took several years to extend the quantum-gas microscope technique to fermionic species, and in 2015 several groups have demonstrated single-atom-resolved imaging of fermions [18]. In these setups, the direct observation of band insulators [19], fermionic Mott insulators [20,21] and even antiferromagnetic correlations [22] has been reported most recently. These developments provide fascinating opportunities to study many-body fermionic quantum systems with single-particle access. The fermionic nature of the electron is vital to understanding a range of phenomena within solid-state physics, such as electron pairing in superconductivity, and quantum magnetism. In this context, the quantum simulator will allow, e.g. for direct measurement of ordered quantum phases and out-of-equilibrium dynamics, with access to quantities such as spin--spin correlation functions and the growth of many-body entanglement. The high-resolution imaging systems could also be used to project tailored time-varying light fields onto the atoms, allowing the removal of high-entropy regions by locally modifying the confining potential to attain very low-entropy states. Attaining these low-entropy many-particle states is one of the key challenges in our field. In summary, quantum-gas microscopes offer unprecedented access to many-body quantum systems, and they will allow us to gain an even deeper insight into the intriguing world of quantum physics that governs the properties of strongly correlated materials. Using a well-controlled quantum system to simulate other quantum systems could help resolve some of the most challenging problems scientists face in condensed matter physics and materials science, but it will also provide new insights in quantum chemistry, high-energy physics and biology. SK acknowledges funding from the EU (ERC FERMILATT, SIQS, QuProCs) and SUPA.
This thesis describes the methods used to achieve single-atom and single-site resolved fluorescence imaging of a quantum gas of fermionic atoms held in an optical lattice. This kind of quantum gas microscopy has been previously applied to bosonic atoms in two experiments, and has allowed for extensive studies of many-body quantum systems. Here we detail methods to extend the techniques of quantum gas microscopy to fermionic species of atoms, opening the door to quantum simulation of electronic models of condensed matter physics. We prepare quantum degenerate gases of fermionic 40K through sympathetic cooling with a gas of \Rb. The gas prepared is trapped less than 1 mm away from a thin vacuum window, an experimental geometry which permits interrogation with a large Numerical Aperture microscope objective. The cloud is loaded into a 527 nm-period cubic optical lattice, ideal for quantum simulation of many-body models of fermionic particles such as the Hubbard model. The optical lattice is designed to allow for potential depths up to V/kB = 250 microKelvin, sufficient to strongly confine 40K atoms into individual lattice sites. EIT cooling --- a technique previously demonstrated in ion-trapping experiments --- is used to cool the fermionic atoms deeply towards the ground motional state of the lattice wells. We collect the photons scattered during continuous application of EIT cooling, while atoms are kept pinned in the lattice for many seconds. We strongly suppress all other sources of light with the use of a modulated cooling scheme and a spinning chopper wheel. Collecting the scattered light produced during 2 s of EIT cooling allows us to resolve single atoms in a fluorescence image. We demonstrate that the high resolution of our imaging apparatus also permits atom positions to be precisely identified on the length scale of the optical lattice. Thus we demonstrate the realisation of a quantum gas microscope for fermionic atoms, allowing for precise investigation of the ground states and dynamics of correlated quantum states of fermionic particles.