I describe how real quantum annealers may be used to perform local (in state space) searches around specified states, rather than the global searches traditionally implemented in the quantum annealing algorithm (QAA). Such protocols will have numerous advantages over simple quantum annealing. By using such searches the effect of problem mis-specification can be reduced, as only energy differences between the searched states will be relevant. The QAA is an analogue of simulated annealing, a classical numerical technique which has now been superseded. Hence, I explore two strategies to use an annealer in a way which takes advantage of modern classical optimization algorithms. Specifically, I show how sequential calls to quantum annealers can be used to construct analogues of population annealing and parallel tempering which use quantum searches as subroutines. The techniques given here can be applied not only to optimization, but also to sampling. I examine the feasibility of these protocols on real devices and note that implementing such protocols should require minimal if any change to the current design of the flux qubit-based annealers by D-Wave Systems Inc. I further provide proof-of-principle numerical experiments based on quantum Monte Carlo that demonstrate simple examples of the discussed techniques.
I describe how real quantum annealers may be used to perform local (in state space) searches around specified states, rather than the global searches traditionally implemented in the quantum annealing algorithm (QAA). Such protocols will have numerous advantages over simple quantum annealing. By using such searches the effect of problem mis-specification can be reduced, as only energy differences between the searched states will be relevant. The QAA is an analogue of simulated annealing, a classical numerical technique which has now been superseded. Hence, I explore two strategies to use an annealer in a way which takes advantage of modern classical optimization algorithms. Specifically, I show how sequential calls to quantum annealers can be used to construct analogues of population annealing and parallel tempering which use quantum searches as subroutines. The techniques given here can be applied not only to optimization, but also to sampling. I examine the feasibility of these protocols on real devices and note that implementing such protocols should require minimal if any change to the current design of the flux qubit-based annealers by D-Wave Systems Inc. I further provide proof-of-principle numerical experiments based on quantum Monte Carlo that demonstrate simple examples of the discussed techniques.
I describe how real quantum annealers may be used to perform local (in state space) searches around specified states, rather than the global searches traditionally implemented in the quantum annealing algorithm. The quantum annealing algorithm is an analogue of simulated annealing, a classical numerical technique which is now obsolete. Hence, I explore strategies to use an annealer in a way which takes advantage of modern classical optimization algorithms, and additionally should be less sensitive to problem mis-specification then the traditional quantum annealing algorithm.
Quantum annealing is a promising tool for solving optimization problems, similar in some ways to the traditional (classical) simulated annealing of Kirkpatrick et al. Simulated annealing takes advantage of thermal fluctuations in order to explore the optimization landscape of the problem at hand, whereas quantum annealing employs quantum fluctuations. Intriguingly, quantum annealing has been proved to be more effective than its classical counterpart in many applications. We illustrate the theory and the practical implementation of both classical and quantum annealing – highlighting the crucial differences between these two methods – by means of results recently obtained in experiments, in simple toy-models, and more challenging combinatorial optimization problems (namely, Random Ising model and Travelling Salesman Problem). The techniques used to implement quantum and classical annealing are either deterministic evolutions, for the simplest models, or Monte Carlo approaches, for harder optimization tasks. We discuss the pro and cons of these approaches and their possible connections to the landscape of the problem addressed.
Critical decision-making issues in science, engineering, and industry are based on combinatorial optimization; however, its application is inherently limited by the NP-hard nature of the problem. A specialized paradigm of analogue quantum computing, quantum annealing (QA), has been proposed to solve these problems by encoding optimization problems into physical energy landscapes and solving them by quantum tunnelling systematically through exploration of solution space. This is a critical review that summarizes the current applications of quantum annealing to combinatorial optimization and includes a theoretical background, hardware designs, algorithm implementation strategies, encoding and embedding schemes, protocols to benchmark quantum annealing, areas of implementation, and links with the quantum algorithms implementation with gate-based hardware and classical solvers. We develop a unified framework, relating adiabatic quantum dynamics, Ising and QUBO models, stoquastic and non-stoquastic Hamiltonians, and diabatic transitions to modern flux-qubit annealers (Chimera, Pegasus, Zephyr topologies), and emergent architectures (Lechner-Hauke-Zoller systems, Rydberg atom platforms), and hybrids of quantum and classical computation. Through our analysis, we find that overhead in embedding and encoding is the largest determinant of the scalability and performance (this is not just the number of qubits). Minor embeddings also usually have a physical qubit count per logical variable of between 5 and 12 qubits, which limits effective problem capacity by 80-92% and, due to chain-breaking errors, compromises the quality of solutions.
We construct an Ising Hamiltonian with an engineered energy landscape such that it has a local energy minimum which is near the true global minimum solution and further away from a false minimum. Using a technique established in previous experiments, we design our experiment such that (at least on timescales relevant to our study) the false minimum is reached preferentially in forward annealing due to high levels of quantum fluctuations. This allows us to demonstrate the key principle of reverse annealing, that the solution space can be searched locally, preferentially finding nearby solutions, even in the presence of a false minimum. The techniques used here are distinct from previously used experimental techniques and allow us to probe the fundamental search range of the device in an alternative way. We perform these experiments on two flux qubit quantum annealers, one with higher noise levels than the other. We find evidence that the lower noise device is more likely to find the more distant energy minimum (the false minimum in this case), suggesting that reducing noise fundamentally increases the range over which flux qubit quantum annealers are able to search. Our work explains why reducing the noise leads to improved performance on these quantum annealers. This supports the idea that these devices may be able to search over broad regions of the solution space quickly, one of the core reasons why quantum annealers are viewed as a potential avenue for a quantum computational advantage.
Simulated Quantum Annealing (SQA) is a heuristic algorithm which can solve Quadratic Unconstrained Binary Optimization (QUBO) problems by emulating the exploration of the solution space done by a quantum annealer. It mimics the quantum superposition and tunnelling effects through a set of correlated replicas of the spins system representing the problem to be solved and performing Monte Carlo steps. However, the effectiveness of SQA over a classical algorithm strictly depends on the cost/energy profile of the target problem. In fact, quantum annealing only performs well in exploring functions with high and narrow peaks, while classical annealing is better in overcoming flat and wide energy-profile barriers. Unfortunately, real-world problems have a heterogeneous solution space and the probability of success of each solver depends on the size of the energy profile region compatible with its exploration mechanism. Therefore, significant advantages could be obtained by exploiting hybrid solvers, which combine SQA and classical algorithms. This work proposes four new quantum-classical algorithms: Simulated Quantum Parallel Tempering (SQPT), Simulated Quantum Population Annealing (SQPA), Simulated Quantum Parallel Tempering - Population Annealing v1 (SQPTPA1) and Simulated Quantum Parallel Tempering - Population Annealing v2 (SQPTPA2). They are obtained by combining SQA, Parallel Tempering (PT), and Population Annealing (PA). Their results are compared with those provided by SQA, considering benchmark QUBO problems, characterized by different profiles. Even though this work is preliminary, the obtained results are encouraging and prove hybrid solvers’ potential in solving a generic optimization problem.
Abstract Quantum annealing, a method of computing where optimization and machine learning problems are mapped to physically implemented energy landscapes subject to quantum fluctuations, allows for these fluctuations to be used to assist in finding the solution to some of the world’s most challenging computational problems. Recently, this field has attracted much interest because of the construction of large-scale flux-qubit based quantum annealing devices. These devices have since implemented a technique known as reverse annealing which allows the solution space to be searched locally, and algorithms based on these techniques have been tested. In this paper, I develop a formalism for algorithmic design in quantum annealers, which I call the ‘inference primitive’ formalism. This formalism naturally lends itself to expressing algorithms which are structurally similar to genetic algorithms, but where the annealing processor performs a combined crossover/mutation step. I demonstrate how these methods can be used to understand the algorithms which have already been implemented and the compatibility of such controls with a wide variety of other current efforts to improve the performance of quantum annealers.