Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1606.06507 · Quantum Science and Technology

Coherent versus measurement-based feedback for controlling a single qubit

Ashkan Balouchi, Kurt A. Jacobs

Published Dec 15, 2016• 14 citations
arXivHTMLPDF

Abstract

Abstract We compare the performance of continuous coherent feedback, implemented using an ideal single-qubit controller, to that of continuous measurement-based feedback (MBF) for the task of controlling the state of a single qubit. We take as the basic dynamical resource the ability to couple the system to a quadrature of a traveling-wave field (for example, a transmission line) via a system observable, and the fundamental limitation is the maximum rate that is available for this coupling. We focus on the question of the best achievable control given ideal controllers. To obtain a fair comparison we acknowledge that the amplification involved in measurement-based control allows the controller to use macroscopic fields to apply feedback forces to the system, so it is natural to allow these feedback forces to be much larger than the mesoscopic coupling to the transmission line that mediates both the measurement for measurement-based control and the coupling to the mesoscopic controller for coherent control. Interestingly our numerical results indicate that under the above platform for comparison, coherent feedback can achieve exactly the performance of MBF given ideal controllers. We also discuss two control mechanisms available to coherent feedback.

DOI
10.1088/2058-9565/aa5409

Related papers

Unified collision model of coherent and measurement-based quantum feedback

Alfred Harwood, Matteo Brunelli, Alessio Serafini

We introduce a general framework, based on collision models and discrete completely positive maps, to describe on an equal footing coherent and measurement-based feedback control of quantum mechanical systems. We apply our framework to prominent tasks in quantum control, ranging from cooling to Hamiltonian control. Unlike other proposed comparisons, where coherent feedback always proves superior, we find that either measurements or coherent manipulations of the controller can be advantageous depending on the task at hand. Measurement-based feedback is typically superior in cooling, while coherent feedback is better at assisting quantum operations. Furthermore, we show that both coherent and measurement-based feedback loops allow one to simulate arbitrary Hamiltonian evolutions, and discuss their respective effectiveness in this regard.

arXiv:2204.00479•Physical Review A•Oct 16, 2023•4 citations

Twenty open problems in quantum control

Kurt A. Jacobs

The subject of controlling quantum systems is not new, but concepts that have been introduced in the last decade and a half, especially that of coherent feedback, suggest new questions that broaden and deepen the field. Here we provide a concise overview and definition of quantum feedback control, both coherent and measurement-based, and discuss its relationship to "standard" time-dependent control; there is a sense in which the latter subsumes the rest. There are many open questions within quantum control and its subfields, and we highlight and discuss some of them here. These questions are of theoretical as well as practical interest: the answers will help to determine the relative power of the different methods of control, and the limits to our ability to control quantum systems imposed by available resources.

arXiv:1304.0819•Apr 3, 2013•13 citations

Unraveling of a detailed-balance-preserved quantum master equation and continuous feedback control of a measured qubit

JunYan Luo, Jinshuang Jin, Shi-Kuan Wang +3 more

We present a generic unraveling scheme for a detailed-balance-preserved quantum master equation applicable for stochastic point processes in mesoscopic transport. It enables us to investigate continuous measurement of a qubit on the level of single quantum trajectories, where essential correlations between the inherent dynamics of the qubit and detector current fluctuations are revealed. Based on this unraveling scheme, feedback control of the charge qubit is implemented to achieve a desired pure state in the presence of the detailed-balance condition. With sufficient feedback strength, coherent oscillations of the measured qubit can be maintained for arbitrary qubit-detector coupling. Competition between the loss and restoration of coherence entailed, respectively, by measurement back action and feedback control is reflected in the noise power spectrum of the detector's output. It is demonstrated unambiguously that the signal-to-noise ratio is significantly enhanced with increasing feedback strength and could even exceed the well-known Korotkov-Averin bound in quantum measurement. The proposed unraveling and feedback scheme offers a transparent and straightforward approach to effectively sustaining ideal coherent oscillations of a charge qubit in the field of quantum computation.

arXiv:1502.07098•Physical review. B./Physical review. B•Mar 14, 2016•5 citations

Real-time Information, Uncertainty and Quantum Feedback Control

Bo Qi, Daoyi Dong, Chunlin Chen +2 more

Feedback is the core concept in cybernetics and its effective use has made great success in but not limited to the fields of engineering, biology, and computer science. When feedback is used to quantum systems, two major types of feedback control protocols including coherent feedback control (CFC) and measurement-based feedback control (MFC) have been developed. In this paper, we compare the two types of quantum feedback control protocols by focusing on the real-time information used in the feedback loop and the capability in dealing with parameter uncertainty. An equivalent relationship is established between quantum CFC and non-selective quantum MFC in the form of operator-sum representation. Using several examples of quantum feedback control, we show that quantum MFC can theoretically achieve better performance than quantum CFC in stabilizing a quantum state and dealing with Hamiltonian parameter uncertainty. The results enrich understanding of the relative advantages between quantum MFC and quantum CFC, and can provide useful information in choosing suitable feedback protocols for quantum systems.

arXiv:1409.2933•Sep 10, 2014•0 citations

Fundamental Principles of Coherent-Feedback Quantum Control

Hideo Mabuchi

Abstract : During the three-year performance period we have carried out a program of theoretical research on the foundations and potential applications of coherent-feedback quantum control. We have focused on potential applications in quantum-enhanced meterology and information processing, and on hardware platforms of an optical or opto-mechanical nature. The studies we have been performing begin to build a picture of how coherent feedback can provide a kind of circuit/network theory for quantum engineering, enabling rigorous analysis and numerical simulation of advanced devices and systems. We have begun to establish analytical approaches for comparing the performance of quantum-enhanced feedback control systems with classical counterparts, leveraging canonical results from classical control theory together with advanced methods for numerical simulations of proposed quantum systems. All of our results point to the interest of continued future study in this area, and of future investments in the experimental realization of the kinds of systems we propose.

•Dec 8, 2014•0 citations

Feedback control of quantum systems : modelling, stabilisation and estimation

Zibo Miao

Quantum engineering has seen rapid growth in the past two decades. Physicists, mathematicians and engineers have been working in unison to control a number of diverse systems in the quantum regime. Quantum control involving feedback has become particularly topical, as using information gained from a system can lead to more stable operation of a control protocol. Quantum feedback can be split into two paradigms: measurement based feedback and coherent feedback. Although it is increasingly evident that retaining the coherence of the feedback signal provides an intrinsic advantage over measurement-based feedback, coherent feedback is still a new paradigm. In particular, there are a limited number of options for coherently estimating a state within a feedback loop. As a step towards better understanding and implementation of quantum feedback, this thesis reports on modelling, estimation and control of quantum systems. The first topic is physical realisability of a variety of quantum systems, especially finite level systems and their outgrowths. Bilinear quantum stochastic differential equations (QSDEs) have to be employed to characterise these systems, which is a significant complement to the previous work on linear QSDEs. In light of the fact that direct and indirect couplings play a vital role in quantum network and control, we also provide state-space models for different classes of coupled open quantum systems incorporating both bidirectional and directional interactions. The second topic is coherent observers and optimal filtering. It is well established that classically estimation using the Kalman filter can provide improved performance over direct feedback schemes, and similar demonstrations have been performed for measurement-based quantum feedback. In this thesis I present coherent observers, including least mean squares estimators, which are driven by the coherent output of a specified quantum plant and designed such that some subset of the observer and plant's expectation values converge in the asymptotic limit. Not only can estimators "observe" mean quantities of quantum plant, but also they can "estimate" quantum correlations such as entanglement. This is of much importance to coherent feedback design in the absence of measurement steps without loss of fidelity. Last but not least, several topics regarding stabilisation and control design of quantum systems are discussed in my thesis. To be specific, tools for quantum stability analysis (e.g. Lyapunov conditions) are provided. Both measurement-based feedback and coherent feedback control design are taken into account. A measurement-based optimal controller for opto-mechanical systems aimed at synchronising different mechanical modes is presented, which is application-oriented. Moreover, A general observer-based coherent feedback control framework is studied, and I demonstrate a pole-placement approach via coherent observers that can be applied to various scenarios.

•Jan 1, 2015•0 citations
Abstract We compare the performance of continuous coherent feedback, implemented using an ideal single-qubit controller, to that of continuous measurement-based feedback (MBF) for the task of controlling the state of a single qubit. We take as the basic dynamical resource the ability to couple the system to a quadrature of a traveling-wave field (for example, a transmission line) via a system observable, and the fundamental limitation is the maximum rate that is available for this coupling. We focus on the question of the best achievable control given ideal controllers. To obtain a fair comparison we acknowledge that the amplification involved in measurement-based control allows the controller to use macroscopic fields to apply feedback forces to the system, so it is natural to allow these feedback forces to be much larger than the mesoscopic coupling to the transmission line that mediates both the measurement for measurement-based control and the coupling to the mesoscopic controller for coherent control. Interestingly our numerical results indicate that under the above platform for comparison, coherent feedback can achieve exactly the performance of MBF given ideal controllers. We also discuss two control mechanisms available to coherent feedback.
We introduce a general framework, based on collision models and discrete completely positive maps, to describe on an equal footing coherent and measurement-based feedback control of quantum mechanical systems. We apply our framework to prominent tasks in quantum control, ranging from cooling to Hamiltonian control. Unlike other proposed comparisons, where coherent feedback always proves superior, we find that either measurements or coherent manipulations of the controller can be advantageous depending on the task at hand. Measurement-based feedback is typically superior in cooling, while coherent feedback is better at assisting quantum operations. Furthermore, we show that both coherent and measurement-based feedback loops allow one to simulate arbitrary Hamiltonian evolutions, and discuss their respective effectiveness in this regard.
The subject of controlling quantum systems is not new, but concepts that have been introduced in the last decade and a half, especially that of coherent feedback, suggest new questions that broaden and deepen the field. Here we provide a concise overview and definition of quantum feedback control, both coherent and measurement-based, and discuss its relationship to "standard" time-dependent control; there is a sense in which the latter subsumes the rest. There are many open questions within quantum control and its subfields, and we highlight and discuss some of them here. These questions are of theoretical as well as practical interest: the answers will help to determine the relative power of the different methods of control, and the limits to our ability to control quantum systems imposed by available resources.
We present a generic unraveling scheme for a detailed-balance-preserved quantum master equation applicable for stochastic point processes in mesoscopic transport. It enables us to investigate continuous measurement of a qubit on the level of single quantum trajectories, where essential correlations between the inherent dynamics of the qubit and detector current fluctuations are revealed. Based on this unraveling scheme, feedback control of the charge qubit is implemented to achieve a desired pure state in the presence of the detailed-balance condition. With sufficient feedback strength, coherent oscillations of the measured qubit can be maintained for arbitrary qubit-detector coupling. Competition between the loss and restoration of coherence entailed, respectively, by measurement back action and feedback control is reflected in the noise power spectrum of the detector's output. It is demonstrated unambiguously that the signal-to-noise ratio is significantly enhanced with increasing feedback strength and could even exceed the well-known Korotkov-Averin bound in quantum measurement. The proposed unraveling and feedback scheme offers a transparent and straightforward approach to effectively sustaining ideal coherent oscillations of a charge qubit in the field of quantum computation.
Feedback is the core concept in cybernetics and its effective use has made great success in but not limited to the fields of engineering, biology, and computer science. When feedback is used to quantum systems, two major types of feedback control protocols including coherent feedback control (CFC) and measurement-based feedback control (MFC) have been developed. In this paper, we compare the two types of quantum feedback control protocols by focusing on the real-time information used in the feedback loop and the capability in dealing with parameter uncertainty. An equivalent relationship is established between quantum CFC and non-selective quantum MFC in the form of operator-sum representation. Using several examples of quantum feedback control, we show that quantum MFC can theoretically achieve better performance than quantum CFC in stabilizing a quantum state and dealing with Hamiltonian parameter uncertainty. The results enrich understanding of the relative advantages between quantum MFC and quantum CFC, and can provide useful information in choosing suitable feedback protocols for quantum systems.
Abstract : During the three-year performance period we have carried out a program of theoretical research on the foundations and potential applications of coherent-feedback quantum control. We have focused on potential applications in quantum-enhanced meterology and information processing, and on hardware platforms of an optical or opto-mechanical nature. The studies we have been performing begin to build a picture of how coherent feedback can provide a kind of circuit/network theory for quantum engineering, enabling rigorous analysis and numerical simulation of advanced devices and systems. We have begun to establish analytical approaches for comparing the performance of quantum-enhanced feedback control systems with classical counterparts, leveraging canonical results from classical control theory together with advanced methods for numerical simulations of proposed quantum systems. All of our results point to the interest of continued future study in this area, and of future investments in the experimental realization of the kinds of systems we propose.
Quantum engineering has seen rapid growth in the past two decades. Physicists, mathematicians and engineers have been working in unison to control a number of diverse systems in the quantum regime. Quantum control involving feedback has become particularly topical, as using information gained from a system can lead to more stable operation of a control protocol. Quantum feedback can be split into two paradigms: measurement based feedback and coherent feedback. Although it is increasingly evident that retaining the coherence of the feedback signal provides an intrinsic advantage over measurement-based feedback, coherent feedback is still a new paradigm. In particular, there are a limited number of options for coherently estimating a state within a feedback loop. As a step towards better understanding and implementation of quantum feedback, this thesis reports on modelling, estimation and control of quantum systems. The first topic is physical realisability of a variety of quantum systems, especially finite level systems and their outgrowths. Bilinear quantum stochastic differential equations (QSDEs) have to be employed to characterise these systems, which is a significant complement to the previous work on linear QSDEs. In light of the fact that direct and indirect couplings play a vital role in quantum network and control, we also provide state-space models for different classes of coupled open quantum systems incorporating both bidirectional and directional interactions. The second topic is coherent observers and optimal filtering. It is well established that classically estimation using the Kalman filter can provide improved performance over direct feedback schemes, and similar demonstrations have been performed for measurement-based quantum feedback. In this thesis I present coherent observers, including least mean squares estimators, which are driven by the coherent output of a specified quantum plant and designed such that some subset of the observer and plant's expectation values converge in the asymptotic limit. Not only can estimators "observe" mean quantities of quantum plant, but also they can "estimate" quantum correlations such as entanglement. This is of much importance to coherent feedback design in the absence of measurement steps without loss of fidelity. Last but not least, several topics regarding stabilisation and control design of quantum systems are discussed in my thesis. To be specific, tools for quantum stability analysis (e.g. Lyapunov conditions) are provided. Both measurement-based feedback and coherent feedback control design are taken into account. A measurement-based optimal controller for opto-mechanical systems aimed at synchronising different mechanical modes is presented, which is application-oriented. Moreover, A general observer-based coherent feedback control framework is studied, and I demonstrate a pole-placement approach via coherent observers that can be applied to various scenarios.