Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1606.03205 · Physical review. B./Physical review. B

Critical Casimir forces from the equation of state of quantum critical systems

Adam Rançon, Louis-Paul Henry, Félix Rose, David Lopes Cardozo, N. Dupuis, P. C. W. Holdsworth, Tommaso Roscilde

Published Oct 28, 2016• 15 citations
arXivHTMLPDF

Abstract

The mapping between a classical length and inverse temperature as imaginary time provides a direct equivalence between the Casimir force of a classical system in $D$ dimensions and internal energy of a quantum system in $d=D\ensuremath{-}1$ dimensions. The scaling functions of the critical Casimir force of the classical system with periodic boundaries thus emerge from the analysis of the symmetry related quantum critical point. We show that both nonperturbative renormalization group and quantum Monte Carlo analysis of quantum critical points provide quantitative estimates for the critical Casimir force in the corresponding classical model, giving access to widely different aspect ratios for the geometry of confined systems. In light of these results, we propose protocols for the realization of critical Casimir forces for periodic boundaries through state-of-the-art cold-atom and solid-state experiments.

DOI
10.1103/physrevb.94.140506

Related papers

Critical Casimir forces for O(N) models from functional renormalization

Paweł Jakubczyk, Marcin Napiórkowski

We consider the classical $O(N)$-symmetric models confined in a $d$-dimensional slablike geometry and subject to periodic boundary conditions. Applying the one-particle-irreducible variant of functional renormalization group (RG), we compute the critical Casimir forces acting between the slab boundaries. The applied truncation of the exact functional RG flow equation retains interaction vertices of arbitrary order. We evaluate the critical Casimir amplitudes ${\ensuremath{\Delta}}_{f}(d,N)$ for continuously varying dimensionality between two and three and $N=1,2$. Our findings are in very good agreement with exact results for $d=2$ and $N=1$. For $d=3$, our results are closer to Monte Carlo predictions than earlier field-theoretic RG calculations. Inclusion of the wave function renormalization and the corresponding anomalous dimension in the calculation has negligible impact on the computed Casimir forces.

arXiv:1212.2647•Physical Review B•Apr 29, 2013•12 citations

Finite-size scaling properties and Casimir forces in an exactly solvable quantum statistical-mechanical model

Hassan Chamati, Daniel M. Danchev, N. S. Tonchev

A d-dimensional finite quantum model system confined to a general hypercubical geometry with linear spatial size L and ``temporal size'' 1/T (T - temperature of the system) is considered in the spherical approximation under periodic boundary conditions. Because of its close relation with the system of quantum rotors it represents an effective model for studying the low-temperature behaviour of quantum Heisenberg antiferromagnets. Close to the zero-temperature quantum critical point the ideas of finite-size scaling are used for studying the critical behaviour of the model. For a film geometry in different space dimensions $\halfσ

arXiv:cond-mat/9709115•Sep 10, 1997•2 citations

Critical free energy and Casimir forces in rectangular geometries

V. Dohm

We study the critical behavior of the free energy and the thermodynamic Casimir force in a L(∥)(d-1) × L block geometry in 2<d<4 dimensions with aspect ratio ρ=L/L(∥) on the basis of the O(n) symmetric ϕ4 lattice model with periodic boundary conditions and with isotropic short-range interactions. Exact results are derived in the large-n limit describing the geometric crossover from film (ρ=0) over cubic (ρ=1) to cylindrical (ρ=∞) geometries. For n=1, three perturbation approaches in the minimal renormalization scheme at fixed d are presented that cover both the central finite-size regime near T(c) for 1/4≲ρ≲3 and the region well above and below T(c). At bulk T(c), we predict the critical Casimir force in the vertical (L) direction to be negative (attractive) for a slab (ρ<1), positive (repulsive) for a rod (ρ>1), and zero for a cube (ρ=1). Our results for finite-size scaling functions agree well with Monte Carlo data for the three-dimensional Ising model by Hasenbusch for ρ=1 and by Vasilyev et al. for ρ=1/6 above, at, and below T(c).

arXiv:1012.5955•Physical Review E•Aug 4, 2011•18 citations

Critical Casimir force scaling functions of the two-dimensional Ising model at finite aspect ratios

Hendrik Hobrecht, Alfred Hucht

Abstract We present a systematic method to calculate the universal scaling functions for the critical Casimir force and the according potential of the two-dimensional Ising model with various boundary conditions. Therefore we start with the dimer representation of the corresponding partition function Z on an L × M square lattice, wrapped around a torus with aspect ratio ρ = L / M . By assuming periodic boundary conditions and translational invariance in at least one direction, we systematically reduce the problem to a 2 × 2 transfer matrix representation. For the torus we first reproduce the results by Kaufman and then give a detailed calculation of the scaling functions. Afterwards we present the calculation for the cylinder with open boundary conditions. All scaling functions are given in form of combinations of infinite products and integrals. Our results reproduce the known scaling functions in the limit of thin films ρ → 0 . Additionally, for the cylinder at criticality our results confirm the predictions from conformal field theory.

arXiv:1611.05622•Journal of Statistical Mechanics Theory and Experiment•Feb 1, 2017•17 citations

Casimir amplitudes in topological quantum phase transitions

M. A. R. Griffith, M. A. Contínentino

Topological phase transitions constitute a new class of quantum critical phenomena. They cannot be described within the usual framework of the Landau theory since, in general, the different phases cannot be distinguished by an order parameter, neither can they be related to different symmetries. In most cases, however, one can identify a diverging length at these topological transitions. This allows us to describe them using a scaling approach and to introduce a set of critical exponents that characterize their universality class. Here we consider some relevant models of quantum topological transitions associated with well-defined critical exponents that are related by a quantum hyperscaling relation. We extend to these models a finite-size scaling approach based on techniques for calculating the Casimir force in electromagnetism. This procedure allows us to obtain universal Casimir amplitudes at their quantum critical points. Our results verify the validity of finite-size scaling in these systems and confirm the values of the critical exponents obtained previously.

Physical review. E•Jan 9, 2018•17 citations

Universal short-time quantum critical dynamics of finite-size systems

Yu-Rong Shu, Shuai Yin, Dao‐Xin Yao

We investigate the short-time quantum critical dynamics in the imaginary-time relaxation processes of finite-size systems. Universal scaling behaviors exist in the imaginary-time evolution. In particular, the system undergoes a critical initial slip stage characterized by an exponent $\ensuremath{\theta}$, in which an initial power-law increase emerges in the imaginary-time correlation function when the initial state has a zero order parameter and a vanishing correlation length. Under different initial conditions, the quantum critical point and critical exponents can be determined from the universal scaling behaviors. We apply the method to the one- and two-dimensional transverse field Ising models using quantum Monte Carlo (QMC) simulations. In the one-dimensional case, we locate the quantum critical point at ${(h/J)}_{c}=1.000\phantom{\rule{0.16em}{0ex}}03(8)$ in the thermodynamic limit, and we estimate the critical initial slip exponent $\ensuremath{\theta}=0.3734(2)$ and the static exponent $\ensuremath{\beta}/\ensuremath{\nu}=0.1251(2)$ by analyzing data on chains of length $L=32--256$ and 48--256, respectively. For the two-dimensional square-lattice system, the critical coupling ratio is given by $3.044\phantom{\rule{0.16em}{0ex}}51(7)$ in the thermodynamic limit, while the critical exponents are $\ensuremath{\theta}=0.209(4)$ and $\ensuremath{\beta}/\ensuremath{\nu}=0.518(1)$ estimated by data on systems of size $L=24$--64 and 32--64, respectively. Remarkably, the critical initial slip exponents obtained in both models are notably distinct from their classical counterparts due to the essential differences between classical and quantum dynamics. The short-time critical dynamics and the imaginary-time relaxation QMC approach can be readily adapted to various models.

arXiv:1705.05931•Physical review. B./Physical review. B•Sep 12, 2017•18 citations
The mapping between a classical length and inverse temperature as imaginary time provides a direct equivalence between the Casimir force of a classical system in DDD dimensions and internal energy of a quantum system in d=D\ensuremath−1d=D\ensuremath{-}1d=D\ensuremath−1 dimensions. The scaling functions of the critical Casimir force of the classical system with periodic boundaries thus emerge from the analysis of the symmetry related quantum critical point. We show that both nonperturbative renormalization group and quantum Monte Carlo analysis of quantum critical points provide quantitative estimates for the critical Casimir force in the corresponding classical model, giving access to widely different aspect ratios for the geometry of confined systems. In light of these results, we propose protocols for the realization of critical Casimir forces for periodic boundaries through state-of-the-art cold-atom and solid-state experiments.
We consider the classical O(N)O(N)O(N)-symmetric models confined in a ddd-dimensional slablike geometry and subject to periodic boundary conditions. Applying the one-particle-irreducible variant of functional renormalization group (RG), we compute the critical Casimir forces acting between the slab boundaries. The applied truncation of the exact functional RG flow equation retains interaction vertices of arbitrary order. We evaluate the critical Casimir amplitudes ${\ensuremath{\Delta}}_{f}(d,N)$ for continuously varying dimensionality between two and three and N=1,2N=1,2N=1,2. Our findings are in very good agreement with exact results for d=2d=2d=2 and N=1N=1N=1. For d=3d=3d=3, our results are closer to Monte Carlo predictions than earlier field-theoretic RG calculations. Inclusion of the wave function renormalization and the corresponding anomalous dimension in the calculation has negligible impact on the computed Casimir forces.
A d-dimensional finite quantum model system confined to a general hypercubical geometry with linear spatial size L and ``temporal size'' 1/T (T - temperature of the system) is considered in the spherical approximation under periodic boundary conditions. Because of its close relation with the system of quantum rotors it represents an effective model for studying the low-temperature behaviour of quantum Heisenberg antiferromagnets. Close to the zero-temperature quantum critical point the ideas of finite-size scaling are used for studying the critical behaviour of the model. For a film geometry in different space dimensions $\halfσ
We study the critical behavior of the free energy and the thermodynamic Casimir force in a L(∥)(d-1) × L block geometry in 2<d<4 dimensions with aspect ratio ρ=L/L(∥) on the basis of the O(n) symmetric ϕ4 lattice model with periodic boundary conditions and with isotropic short-range interactions. Exact results are derived in the large-n limit describing the geometric crossover from film (ρ=0) over cubic (ρ=1) to cylindrical (ρ=∞) geometries. For n=1, three perturbation approaches in the minimal renormalization scheme at fixed d are presented that cover both the central finite-size regime near T(c) for 1/4≲ρ≲3 and the region well above and below T(c). At bulk T(c), we predict the critical Casimir force in the vertical (L) direction to be negative (attractive) for a slab (ρ<1), positive (repulsive) for a rod (ρ>1), and zero for a cube (ρ=1). Our results for finite-size scaling functions agree well with Monte Carlo data for the three-dimensional Ising model by Hasenbusch for ρ=1 and by Vasilyev et al. for ρ=1/6 above, at, and below T(c).
Abstract We present a systematic method to calculate the universal scaling functions for the critical Casimir force and the according potential of the two-dimensional Ising model with various boundary conditions. Therefore we start with the dimer representation of the corresponding partition function Z on an L × M square lattice, wrapped around a torus with aspect ratio ρ = L / M . By assuming periodic boundary conditions and translational invariance in at least one direction, we systematically reduce the problem to a 2 × 2 transfer matrix representation. For the torus we first reproduce the results by Kaufman and then give a detailed calculation of the scaling functions. Afterwards we present the calculation for the cylinder with open boundary conditions. All scaling functions are given in form of combinations of infinite products and integrals. Our results reproduce the known scaling functions in the limit of thin films ρ → 0 . Additionally, for the cylinder at criticality our results confirm the predictions from conformal field theory.
Topological phase transitions constitute a new class of quantum critical phenomena. They cannot be described within the usual framework of the Landau theory since, in general, the different phases cannot be distinguished by an order parameter, neither can they be related to different symmetries. In most cases, however, one can identify a diverging length at these topological transitions. This allows us to describe them using a scaling approach and to introduce a set of critical exponents that characterize their universality class. Here we consider some relevant models of quantum topological transitions associated with well-defined critical exponents that are related by a quantum hyperscaling relation. We extend to these models a finite-size scaling approach based on techniques for calculating the Casimir force in electromagnetism. This procedure allows us to obtain universal Casimir amplitudes at their quantum critical points. Our results verify the validity of finite-size scaling in these systems and confirm the values of the critical exponents obtained previously.
We investigate the short-time quantum critical dynamics in the imaginary-time relaxation processes of finite-size systems. Universal scaling behaviors exist in the imaginary-time evolution. In particular, the system undergoes a critical initial slip stage characterized by an exponent $\ensuremath{\theta}$, in which an initial power-law increase emerges in the imaginary-time correlation function when the initial state has a zero order parameter and a vanishing correlation length. Under different initial conditions, the quantum critical point and critical exponents can be determined from the universal scaling behaviors. We apply the method to the one- and two-dimensional transverse field Ising models using quantum Monte Carlo (QMC) simulations. In the one-dimensional case, we locate the quantum critical point at (h/J)c=1.00003(8){(h/J)}_{c}=1.000\phantom{\rule{0.16em}{0ex}}03(8)(h/J)c​=1.00003(8) in the thermodynamic limit, and we estimate the critical initial slip exponent $\ensuremath{\theta}=0.3734(2)$ and the static exponent $\ensuremath{\beta}/\ensuremath{\nu}=0.1251(2)$ by analyzing data on chains of length L=32−−256L=32--256L=32−−256 and 48--256, respectively. For the two-dimensional square-lattice system, the critical coupling ratio is given by 3.04451(7)3.044\phantom{\rule{0.16em}{0ex}}51(7)3.04451(7) in the thermodynamic limit, while the critical exponents are $\ensuremath{\theta}=0.209(4)$ and $\ensuremath{\beta}/\ensuremath{\nu}=0.518(1)$ estimated by data on systems of size L=24L=24L=24--64 and 32--64, respectively. Remarkably, the critical initial slip exponents obtained in both models are notably distinct from their classical counterparts due to the essential differences between classical and quantum dynamics. The short-time critical dynamics and the imaginary-time relaxation QMC approach can be readily adapted to various models.