Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1606.00208 · Physical Review A

Quantum gates and architecture for the quantum simulation of the Fermi-Hubbard model

Pierre-Luc Dallaire-Demers, Frank K. Wilhelm

Published Dec 5, 2016• 36 citations
arXivHTMLPDF

Abstract

Quantum computers are the ideal platform for quantum simulations. Given enough coherent operations and qubits, such machines can be leveraged to simulate strongly correlated materials, where intricate quantum effects give rise to counterintuitive macroscopic phenomena such as high-temperature superconductivity. In this paper, we provide a gate decomposition and an architecture for a quantum simulator used to simulate the Fermi-Hubbard model in a hybrid variational quantum-classical algorithm. We propose a simple planar implementation-independent layout of qubits that can also be used to simulate more general fermionic systems. By working through a concrete application, we show the gate decomposition used to simulate the Hamiltonian of a cluster of the Fermi-Hubbard model. We briefly analyze the Trotter-Suzuki errors and estimate the scaling properties of the algorithm for more complex applications.

DOI
10.1103/physreva.94.062304

Related papers

Quantum simulation of Fermi-Hubbard model based on transmon qudit interaction

Arian Vezvaee, Nathan Earnest, Khadijeh Najafi

The Fermi-Hubbard model, a fundamental framework for studying strongly correlated phenomena could significantly benefit from quantum simulations when exploring non-trivial settings. However, simulating this problem requires twice as many qubits as the physical sites, in addition to complicated on-chip connectivities and swap gates required to simulate the physical interactions. In this work, we introduce a novel quantum simulation approach utilizing qudits to overcome such complexities. Leveraging on the symmetries of the Fermi-Hubbard model and their intrinsic relation to Clifford algebras, we first demonstrate a Qudit Fermionic Mapping (QFM) that reduces the encoding cost associated with the qubit-based approach. We then describe the unitary evolution of the mapped Hamiltonian by interpreting the resulting Majorana operators in terms of physical single- and two-qudit gates. While the QFM can be used for any quantum hardware with four accessible energy levels, we demonstrate the specific reduction in overhead resulting from utilizing the native Controlled-SUM gate (equivalent to qubit CNOT) for a fixed-frequency ququart transmon. We further transpile the resulting two transmon-qudit gates by demonstrating a qudit operator Schmidt decomposition using the Controlled-SUM gate. Finally, we demonstrate the efficacy of our proposal by numerical simulation of local observables such as the filling factor and Green's function for various Trotter steps. The compatibility of our approach with different qudit platforms paves the path for achieving quantum advantage in simulating non-trivial quantum many-body systems.

arXiv:2402.01243•Feb 2, 2024•14 citations

Observation of separated dynamics of charge and spin in the Fermi-Hubbard model

Frank Arute, Kunal Arya, Ryan Babbush +96 more

Strongly correlated quantum systems give rise to many exotic physical phenomena, including high-temperature superconductivity. Simulating these systems on quantum computers may avoid the prohibitively high computational cost incurred in classical approaches. However, systematic errors and decoherence effects presented in current quantum devices make it difficult to achieve this. Here, we simulate the dynamics of the one-dimensional Fermi-Hubbard model using 16 qubits on a digital superconducting quantum processor. We observe separations in the spreading velocities of charge and spin densities in the highly excited regime, a regime that is beyond the conventional quasiparticle picture. To minimize systematic errors, we introduce an accurate gate calibration procedure that is fast enough to capture temporal drifts of the gate parameters. We also employ a sequence of error-mitigation techniques to reduce decoherence effects and residual systematic errors. These procedures allow us to simulate the time evolution of the model faithfully despite having over 600 two-qubit gates in our circuits. Our experiment charts a path to practical quantum simulation of strongly correlated phenomena using available quantum devices.

arXiv:2010.07965•Oct 15, 2020•201 citations

Method to efficiently simulate the thermodynamic properties of the Fermi-Hubbard model on a quantum computer

Pierre-Luc Dallaire-Demers, Frank K. Wilhelm

Many phenomena of strongly correlated materials are encapsulated in the Fermi-Hubbard model whose thermodynamic properties can be computed from its grand-canonical potential. In general, there is no closed-form expression of the grand-canonical potential for lattices of more than one spatial dimension, but solutions can be numerically approximated using cluster methods. To model long-range effects such as order parameters, a powerful method to compute the cluster's Green's function consists of finding its self-energy through a variational principle. This allows the possibility of studying various phase transitions at finite temperature in the Fermi-Hubbard model. However, a classical cluster solver quickly hits an exponential wall in the memory (or computation time) required to store the computation variables. Here it is shown theoretically that the cluster solver can be mapped to a subroutine on a quantum computer whose quantum memory usage scales linearly with the number of orbitals in the simulated cluster and the number of measurements scales quadratically. A quantum computer with a few tens of qubits could therefore simulate the thermodynamic properties of complex fermionic lattices inaccessible to classical supercomputers.

arXiv:1508.04328•Physical Review A•Mar 2, 2016•32 citations

Quantum algorithm for Green's-function measurements in the Fermi-Hubbard model

Gino Bishop, Dmitry Bagrets, Frank K. Wilhelm

In the framework of the hybrid quantum-classical variational cluster approach to strongly correlated electron systems one of the goals of a quantum subroutine is to find single-particle correlation functions of lattice fermions in polynomial time. Previous works suggested to use variants of the Hadamard test for this purpose, which requires an implementation of controlled single-particle fermionic operators. However, for a number of locality-preserving mappings to encode fermions into qubits, a direct construction of such operators is not possible. In this work, we propose a quantum algorithm that uses an analog of the Kubo formula adapted to a quantum circuit simulating the Hubbard model. It allows to access the Green's function of a cluster directly using only bilinears of fermionic operators and circumvents the usage of the Hadamard test. We test our algorithm in practice by using open-access simulators of noisy IBM superconducting chips.

arXiv:2310.10412•Physical Review A•May 9, 2025•5 citations

Quantum utility in simulating the real-time dynamics of the Fermi–Hubbard model using superconducting quantum computers

Talal Ahmed Chowdhury, V. E. Korepin, Vincent Richard Pascuzzi +1 more

The Fermi–Hubbard model is a fundamental model in condensed matter physics that describes strongly correlated electrons. On the other hand, quantum computers are emerging as powerful tools for exploring the complex dynamics of these quantum many-body systems. In this work, we demonstrate the quantum simulation of the one-dimensional Fermi–Hubbard model using IBM's superconducting quantum computers, employing over 100 qubits. We introduce a first-order Trotterization scheme and extend it to an optimized second-order Trotterization for the time evolution in the Fermi–Hubbard model, specifically tailored for the limited qubit connectivity of quantum architectures, such as IBM's platforms. Notably, both Trotterization approaches are scalable and maintain a constant circuit depth at each Trotter step, regardless of the qubit count, enabling us to precisely investigate the relaxation dynamics in the Fermi–Hubbard model by measuring the expectation value of the Néel observable (staggered magnetization) for time-evolved quantum states. Finally, our successful measurement of expectation values in such large-scale quantum many-body systems, especially at longer time scales with larger entanglement, highlights the quantum utility of superconducting quantum platforms over conventional classical approximation methods.

arXiv:2509.14196•Applied Physics Reviews•Mar 1, 2026•16 citations

Recipe for local simulation of strongly correlated fermionic matter on quantum computers: The two-dimensional Fermi-Hubbard model

Arash Jafarizadeh, Frank Pollmann, Adam Gammon-Smith

The simulation of quantum many-body systems, relevant for quantum chemistry and condensed matter physics, is one of the most promising applications of near-term quantum computers before fault-tolerance. However, since the vast majority of quantum computing technologies are built around qubits and discrete gate-based operations, the translation of the physical problem into this framework is a crucial step. This translation will often be device specific, and a suboptimal implementation will be punished by the exponential compounding of errors on real devices. The importance of an efficient mapping is already revealed for models of spinful fermions in two or three dimensions, which naturally arise when the relevant physics relates to electrons. Using the most direct and well-known mapping, the Jordan-Wigner transformation, leads to a nonlocal representation of local degrees of freedom, and necessities efficient decompositions of nonlocal unitary gates into a sequence of hardware accessible local gates. In this paper, we provide a step-by-step recipe for simulating the paradigmatic two-dimensional Fermi-Hubbard model on a quantum computer using only local operations. To provide the ingredients for such a recipe, we briefly review the plethora of different approaches that have emerged recently but focus on the Derby-Klassen compact fermion mapping to make our discussion concrete. We provide a detailed recipe for an end-to-end simulation including embedding on a physical device, preparing initial states such as ground states, simulation of unitary time evolution, and measurement of observables and spectral functions. We explicitly compute the resource requirements for simulating a global quantum quench and conclude by discussing the challenges and future directions for simulating strongly correlated fermionic matter on quantum computers.

arXiv:2408.14543•Physical Review Research•Oct 7, 2025•9 citations
Quantum computers are the ideal platform for quantum simulations. Given enough coherent operations and qubits, such machines can be leveraged to simulate strongly correlated materials, where intricate quantum effects give rise to counterintuitive macroscopic phenomena such as high-temperature superconductivity. In this paper, we provide a gate decomposition and an architecture for a quantum simulator used to simulate the Fermi-Hubbard model in a hybrid variational quantum-classical algorithm. We propose a simple planar implementation-independent layout of qubits that can also be used to simulate more general fermionic systems. By working through a concrete application, we show the gate decomposition used to simulate the Hamiltonian of a cluster of the Fermi-Hubbard model. We briefly analyze the Trotter-Suzuki errors and estimate the scaling properties of the algorithm for more complex applications.
The Fermi-Hubbard model, a fundamental framework for studying strongly correlated phenomena could significantly benefit from quantum simulations when exploring non-trivial settings. However, simulating this problem requires twice as many qubits as the physical sites, in addition to complicated on-chip connectivities and swap gates required to simulate the physical interactions. In this work, we introduce a novel quantum simulation approach utilizing qudits to overcome such complexities. Leveraging on the symmetries of the Fermi-Hubbard model and their intrinsic relation to Clifford algebras, we first demonstrate a Qudit Fermionic Mapping (QFM) that reduces the encoding cost associated with the qubit-based approach. We then describe the unitary evolution of the mapped Hamiltonian by interpreting the resulting Majorana operators in terms of physical single- and two-qudit gates. While the QFM can be used for any quantum hardware with four accessible energy levels, we demonstrate the specific reduction in overhead resulting from utilizing the native Controlled-SUM gate (equivalent to qubit CNOT) for a fixed-frequency ququart transmon. We further transpile the resulting two transmon-qudit gates by demonstrating a qudit operator Schmidt decomposition using the Controlled-SUM gate. Finally, we demonstrate the efficacy of our proposal by numerical simulation of local observables such as the filling factor and Green's function for various Trotter steps. The compatibility of our approach with different qudit platforms paves the path for achieving quantum advantage in simulating non-trivial quantum many-body systems.
Strongly correlated quantum systems give rise to many exotic physical phenomena, including high-temperature superconductivity. Simulating these systems on quantum computers may avoid the prohibitively high computational cost incurred in classical approaches. However, systematic errors and decoherence effects presented in current quantum devices make it difficult to achieve this. Here, we simulate the dynamics of the one-dimensional Fermi-Hubbard model using 16 qubits on a digital superconducting quantum processor. We observe separations in the spreading velocities of charge and spin densities in the highly excited regime, a regime that is beyond the conventional quasiparticle picture. To minimize systematic errors, we introduce an accurate gate calibration procedure that is fast enough to capture temporal drifts of the gate parameters. We also employ a sequence of error-mitigation techniques to reduce decoherence effects and residual systematic errors. These procedures allow us to simulate the time evolution of the model faithfully despite having over 600 two-qubit gates in our circuits. Our experiment charts a path to practical quantum simulation of strongly correlated phenomena using available quantum devices.
Many phenomena of strongly correlated materials are encapsulated in the Fermi-Hubbard model whose thermodynamic properties can be computed from its grand-canonical potential. In general, there is no closed-form expression of the grand-canonical potential for lattices of more than one spatial dimension, but solutions can be numerically approximated using cluster methods. To model long-range effects such as order parameters, a powerful method to compute the cluster's Green's function consists of finding its self-energy through a variational principle. This allows the possibility of studying various phase transitions at finite temperature in the Fermi-Hubbard model. However, a classical cluster solver quickly hits an exponential wall in the memory (or computation time) required to store the computation variables. Here it is shown theoretically that the cluster solver can be mapped to a subroutine on a quantum computer whose quantum memory usage scales linearly with the number of orbitals in the simulated cluster and the number of measurements scales quadratically. A quantum computer with a few tens of qubits could therefore simulate the thermodynamic properties of complex fermionic lattices inaccessible to classical supercomputers.
In the framework of the hybrid quantum-classical variational cluster approach to strongly correlated electron systems one of the goals of a quantum subroutine is to find single-particle correlation functions of lattice fermions in polynomial time. Previous works suggested to use variants of the Hadamard test for this purpose, which requires an implementation of controlled single-particle fermionic operators. However, for a number of locality-preserving mappings to encode fermions into qubits, a direct construction of such operators is not possible. In this work, we propose a quantum algorithm that uses an analog of the Kubo formula adapted to a quantum circuit simulating the Hubbard model. It allows to access the Green's function of a cluster directly using only bilinears of fermionic operators and circumvents the usage of the Hadamard test. We test our algorithm in practice by using open-access simulators of noisy IBM superconducting chips.
The Fermi–Hubbard model is a fundamental model in condensed matter physics that describes strongly correlated electrons. On the other hand, quantum computers are emerging as powerful tools for exploring the complex dynamics of these quantum many-body systems. In this work, we demonstrate the quantum simulation of the one-dimensional Fermi–Hubbard model using IBM's superconducting quantum computers, employing over 100 qubits. We introduce a first-order Trotterization scheme and extend it to an optimized second-order Trotterization for the time evolution in the Fermi–Hubbard model, specifically tailored for the limited qubit connectivity of quantum architectures, such as IBM's platforms. Notably, both Trotterization approaches are scalable and maintain a constant circuit depth at each Trotter step, regardless of the qubit count, enabling us to precisely investigate the relaxation dynamics in the Fermi–Hubbard model by measuring the expectation value of the Néel observable (staggered magnetization) for time-evolved quantum states. Finally, our successful measurement of expectation values in such large-scale quantum many-body systems, especially at longer time scales with larger entanglement, highlights the quantum utility of superconducting quantum platforms over conventional classical approximation methods.
The simulation of quantum many-body systems, relevant for quantum chemistry and condensed matter physics, is one of the most promising applications of near-term quantum computers before fault-tolerance. However, since the vast majority of quantum computing technologies are built around qubits and discrete gate-based operations, the translation of the physical problem into this framework is a crucial step. This translation will often be device specific, and a suboptimal implementation will be punished by the exponential compounding of errors on real devices. The importance of an efficient mapping is already revealed for models of spinful fermions in two or three dimensions, which naturally arise when the relevant physics relates to electrons. Using the most direct and well-known mapping, the Jordan-Wigner transformation, leads to a nonlocal representation of local degrees of freedom, and necessities efficient decompositions of nonlocal unitary gates into a sequence of hardware accessible local gates. In this paper, we provide a step-by-step recipe for simulating the paradigmatic two-dimensional Fermi-Hubbard model on a quantum computer using only local operations. To provide the ingredients for such a recipe, we briefly review the plethora of different approaches that have emerged recently but focus on the Derby-Klassen compact fermion mapping to make our discussion concrete. We provide a detailed recipe for an end-to-end simulation including embedding on a physical device, preparing initial states such as ground states, simulation of unitary time evolution, and measurement of observables and spectral functions. We explicitly compute the resource requirements for simulating a global quantum quench and conclude by discussing the challenges and future directions for simulating strongly correlated fermionic matter on quantum computers.