This short and opinionated review starts with the concept of quantum signals at microwave frequencies and focuses on the principle of linear parametric amplification. This process emerges from the dispersive nonlinearity of Josephson junctions driven with appropriate tones. We discuss two defining characteristics of the corresponding amplifying devices: i) the number of modes excited by the signal, idler and pump waves and ii) the number of independent ports through which these waves enter into the circuit.
This short and opinionated review starts with the concept of quantum signals at microwave frequencies and focuses on the principle of linear parametric amplification. This process emerges from the dispersive nonlinearity of Josephson junctions driven with appropriate tones. We discuss two defining characteristics of the corresponding amplifying devices: i) the number of modes excited by the signal, idler and pump waves and ii) the number of independent ports through which these waves enter into the circuit.
Linear parametric amplification is a key operation in information processing. Our interest here is quantum-limited parametric amplification, i.e., amplification of quantum signals while adding the minimum amount of noise allowed by quantum mechanics, which is essential for any viable implementation of quantum information processing. We describe parametric amplifiers based on the dispersive nonlinearity of Josephson junctions driven with appropriate tones playing the role of pumps. We discuss two defining characteristics in the architecture of these amplifiers: the number of modes occupied by the signal, idler, and pump waves and the number of independent ports through which these waves enter into the circuit. The scattering properties of these amplifiers are also reviewed. The main focus of this work are the computations of the dynamic range and phase-space distributions of the fluctuations of the modes of the amplifiers.
In the last few years, several groups have proposed and developed their own platforms demonstrating quantum-limited linear parametric amplification, with evident applications in quantum information and computation, electrical and optical metrology, radio astronomy, and basic physics concerning axion detection. Here, we propose a short review on the physics behind parametric amplification via metamaterials composed by coplanar waveguides embedding several Josephson junctions. We present and compare different schemes that exploit the nonlinearity of the Josephson current-phase relation to mix the so-called signal, idler, and pump tones. The chapter then presents and compares three different theoretical models, developed in the last few years, to predict the dynamics of these nonlinear systems in the particular case of a 4-wave mixing process and under the degenerate undepleted pump assumption. We will demonstrate that, under the same assumption, all the results are comparable in terms of amplification of the output fields.
The recent developments in quantum technologies, as well as advanced detection experiments, have raised the need to detect extremely weak signals in the microwave frequency spectrum. To this aim, the Josephson travelling wave parametric amplifier, a device capable of reaching the quantum noise limit while providing a wide bandwidth, has been proposed as a suitable cryogenic front-end amplifier. This work deals with the numerical study of a Josephson travelling wave parametric amplifier, without approximations regarding the nonlinearity of the key elements. In particular, we focus on the investigation of the system of coupled nonlinear differential equations representing all the cells of the Josephson travelling wave parametric amplifier, with proper input and output signals at the boundaries. The investigation of the output signals generated by the parametric amplification process explores the phase-space and the Fourier spectral analysis of the output voltage, as a function of the parameters describing the pump and signal tones that excite the device. Beside the expected behavior, i.e., the signal amplification, we show that, depending on the system operation, unwanted effects (such as pump tone harmonics, incommensurate frequency generation, and noise rise), which are not accounted for in simple linearized approaches, can be generated in the whole nonlinear system.
We study the dynamics of a driven atomic Josephson junction that we propose as a parametric amplifier. By periodically modulating the position of the barrier, we induce a small current across the junction, serving as our input signal. The pump field is implemented by modulating the barrier height at twice the Josephson plasma frequency. The resulting dynamics exhibit parametric amplification of the signal through nonlinear mixing between the signal and pump fields, which is encoded in a specific microscopic pattern of density waves and phase excitations that can be addressed within the experimental cold-atom capabilities. This work paves the way for tunable amplifiers in atomtronic circuits, with potential applications in several fields including precision measurements and quantum information processing. At the same time, our analysis provides the microscopic explanation of the general notion of parametric amplification occurring in nonlinear coherent devices.
Non-linear microwave devices based on Josephson tunnel junctions and operating near the quantum limit have so far been based on SQUIDS and degenerate parametrically pumped oscillators, or related systems. This chapter addresses a new type of Josephson device operation that performs quantum analog signal processing, namely that of non-degenerate three-wave mixing. Both quantum-limited amplification and frequency conversion are possible with such devices, and their characteristics are entirely calculable analytically. The chapter in particular discusses the relationships between photon number gain, bandwidth, and dynamic range.
One of the primary requirements for superconducting quantum information processors is high-fidelity, quantum non-demolition qubit readout. In superconducting circuits, we perform measurements with quantum-limited microwave amplifiers. These amplifiers are based on microwave cavities and powered by Josephson-junction based nonlinearities, which we drive to parametrically modulate the circuit and generate gain. However, cavity-based amplifiers generally suffer from a fixed gain-bandwidth product, a limited dynamic range, and the absence of directionality, and so they must be operated with external lossy microwave commercial components such as circulators. Many of these limitations can be circumvented by combining multiple parametric processes in a few-mode device, in particular by combining parametric drives which produce gain and those which produce gainless photon conversion. By combining balanced gain and conversion processes between a pair of modes, we have demonstrated transmission-only, phase-sensitive, gain-bandwidth-free amplification. We have also used measurements of transmon qubits with this mode of amplification to demonstrate its practical utility. More, by combining multiple instances of imbalanced gain and conversion processes among three modes, we have realized devices with non-reciprocal, transmission-only amplification, matched ports, and a large, gain-independent bandwidth. One of the biggest challenges in tuning multiple parametric processes is both inherent and dynamically-generated higher order nonlinearities in the device, which shift mode frequencies and parametric coupling strengths with pump power, preventing accurate balancing of the parametric processes. These can be controlled through engineering the Hamiltonian of the nonlinear element, in this thesis either a linearly-shunted Josephson Ring Modulator or SNAIL (Superconducting Nonlinear Asymmetric Inductive eLements), which for certain applied flux values can minimize or even change the sign of higher-order even nonlinearities. Additionally, we have explored a range of circuit parameters, allowing us to also control the relative size of odd-order nonlinearities. We have developed a series of prototypes which implement these concepts, and have achieved both high-dynamic range singly pumped amplifiers, and a promising platform for multi-parametric devices. We conclude by presenting recent progress towards implementing multiple parametric schemes that generates a practical directional amplifier, and discuss the remaining obstacles to a truly ideal parametric amplifiers.