Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1605.00199 · Communications in Theoretical Physics

Approaching Quantum-Limited Amplification with Large Gain Catalyzed by Optical Parametric Amplifier Medium*

Qiang Zheng, Kai Li

Published Jul 1, 2017• 0 citations
arXivHTMLPDF

Abstract

Abstract Amplifier is at the heart of experiments carrying out the precise measurement of a weak signal. An idea quantum amplifier should have a large gain and minimum added noise simultaneously. Here, we consider the quantum measurement properties of the cavity with the OPA medium in the op-amp mode to amplify an input signal. We show that our nonlinear-cavity quantum amplifier has large gain in the single-value stable regime and achieves quantum limit unconditionally.

DOI
10.1088/0253-6102/68/1/76

Related papers

Squeezed amplification in a gain-saturated parametric amplifier

N. C. Wong, Ke-Xun Sun, Jeffrey H. Shapiro

Recently optical parametric amplifiers (OPAs) with vacuum inputs have been extensively studied and shown to generate a significant amount of squeezing, but little is known about the quantum noise behavior of an OPA with an injected signal field. We have performed a linearized quantum analysis of a nondegenerate OPA operated in the saturated gain regime showing that the amplified output intensity of a coherent-state input signal becomes squeezed when the classical small-signal gain falls below unity. In uses such as master-oscillator power amplifiers, for which the signal of interest is the mean output intensity, the output signal-to-noise ratio (SNR) can be higher than the input SNR over a broad operating range. For an OPA pumped at 90% of threshold, the SNR improvement is about a factor of 3, and with a 10-Db amplitude squeezed pump, the improvement increases to about a factor of 7. Such a tunable gain-saturated OPA with large-signal gain and improved SNR can be potentially useful in digital communication.

Annual Meeting Optical Society of America•Jan 1, 1991•0 citations

Efficient net-gain integrated optical parametric amplifier in the quantum regime

Yung-Cheng Kao, Jiaqi Huang, Ian Briggs +2 more

Optical parametric amplifiers (OPAs) are promising to overcome the wavelength coverage and noise limitations in conventional optical amplifiers based on rare-earth doping and semiconductor gain. However, the high power requirement remains a major obstacle to the widespread use of OPAs. Integrated OPAs can in principle improve the pump efficiency with tight mode confinement; however, challenges associated with propagation loss, limited nonlinearity, and susceptibility to nanoscale fabrication imperfections prevent them from competing with conventional bulk and fiber-based OPAs. Here, we demonstrate a highly efficient integrated OPAs with continuous-wave net gain. The pump efficiency is improved by over one order of magnitude. Phase-sensitive gain of 23.5 dB is demonstrated, significantly exceeding previous integrated OPAs, using only 110 mW pump power and no cavity enhancement. This is achieved with parametric down-conversion in thin-film lithium niobate waveguides using the adapted poling technique to maintain the coherence of nonlinear interactions. Moreover, the high parametric gain exceeds fibre-chip-fibre losses, leading to appreciable net gain up to 10 dB. The 3 dB bandwidth is approximately 120 nm, covering telecommunication S-, C-, and Lbands. Quantum-limited noise performance is confirmed through the measurement of output field fluctuation below the classical limit. We further demonstrate that signalto-noise ratio in noisy optical communications can be increased by leveraging this efficient integrated OPA. Our work marks a significant step towards ideal optical amplifiers with strong amplification, high efficiency, quantum-limited noise, large bandwidth, and continuous-wave operation, unlocking new possibilities for next-generation photonic information processing systems.

physics.opticsCross-listedarXiv:2602.05982•Feb 6, 2026•3 citations

Quantum noise in optical parametric amplifier based on a lossy nonlinear interferometer

Pape Maguette Sylla

Optical Parametric Amplifiers (OPA) have been of wide interest for the past decades due to their potential for low noise amplification and generation of squeezed light. However, the existing OPAs for fiber applications are based on Kerr effect and require from few centimeters to kilometers of fiber for significant gain. In this thesis, I review the principles of phase sensitive amplification and derive the expression for gain of a lossless Kerr medium based Nonlinear Mach-Zehnder Interferometer (NMZI OPA) using a classical physics model . Using quantum optics, I calculate the noise of a lossless Kerr medium based OPA and show that the noise figure can be close to zero. Since in real life a Kerr medium is lossy, using quantum electrodynamics, I derive equations for the evolution of a wave propagating in a lossy Kerr medium such as an optical fiber. I integrate these equations in order to obtain the parametric gain, the noise and the noise figure. I demonstrate that the noise figure has a simple expression as a function of loss coefficient and length of the Kerr medium and that the previously published results by a another research group are incorrect. I also develop a simple expression for the noise figure for high gain parametric amplifiers with distributed loss or gain. In order to enable construction of compact parametric amplifiers I consider using different nonlinear media, in particular a Saturable Absorber (SA) and a Semiconductor Optical Amplifier (SOA). Using published results on the noise from SOA I conclude that that such device would be prohibitively noisy. Therefore, I perform a detailed analysis of noise properties of a SA based parametric amplifier. Using a quantum mechanical model of an atomic 3 level system and the Heisenberg's equations, I analyze the evolution in time of a single mode coherent optical wave interacting with a saturable absorber. I solve the simultaneous differential equations and find the expression for the noise figure of the SA based NMZI OPA. The results show that noise figure is still undesirably high. The source of the noise is identified. A new approach for low noise parametric amplifier operating with short pulses is proposed.

•Jan 1, 2009•0 citations

Squeezed amplification with cavity detunings: noise behavior

Ke-Xun Sun, Jeffrey H. Shapiro

Optical parametric amplifiers (OPA's) and optical parametric oscillators (OPO's) can exhibit squeezed amplification when an injected signal beam is used to elicit small-signal gain saturation. This paper extends previous work on OPA/OPO noise behavior under signal injection. Doubly resonant and triply resonant, single-ended cavities are considered in the good-cavity limit. Owing to the nonlinear coupling between the signal and idler beams within the cavity, both are sensitive to the detuning of each beam from its respective resonance. Signal and idler output noise spectra are found by linearizing the quantum coupled-mode equations about the classical mean-field solutions. Cavity detunings lead to frequency dependent phase shifts between the low-noise and high-noise quadratures of both the signal and idler beams. Moreover, the phase of the low-noise quadrature need not coincide with that of the corresponding mean field. The resulting large-signal, signal-to-noise ratio improvement afforded by squeezed amplification is therefore sensitive to the cavity detunings. The effects of classical excess noise on the pump beam and the injected signal beam are also considered.

Annual Meeting Optical Society of America•Jan 1, 1992•0 citations

Low-Noise Amplification and Frequency Conversion with a Multiport Microwave Optomechanical Device

Caspar F. Ockeloen-Korppi, Erno Damskägg, J.-M. Pirkkalainen +3 more

High-gain amplifiers of electromagnetic signals operating near the quantum limit are crucial for quantum information systems and ultrasensitive quantum measurements.However, the existing techniques have a limited gain-bandwidth product and only operate with weak input signals.Here, we demonstrate a two-port optomechanical scheme for amplification and routing of microwave signals, a system that simultaneously performs high-gain amplification and frequency conversion in the quantum regime.Our amplifier, implemented in a two-cavity microwave optomechanical device, shows 41 dB of gain and has a high dynamic range, handling input signals up to 10 13 photons per second, 3 orders of magnitude more than corresponding Josephson parametric amplifiers.We show that although the active medium, the mechanical resonator, is at a high temperature far from the quantum limit, only 4.6 quanta of noise is added to the input signal.Our method can be readily applied to a wide variety of optomechanical systems, including hybrid optical-microwave systems, creating a universal hub for signals at the quantum level.

arXiv:1602.05779•Physical Review X•Oct 28, 2016•67 citations

Surpassing the standard quantum limit via gain-assisted auxiliary cavities and parametric amplification

Yingjian Zhu, Xue Yan Han, Hong‐Fu Wang +1 more

The detection of weak forces plays a crucial role in various fields, from gravitational wave astronomy to biological sensing. A fundamental limitation in such measurements arises from quantum and thermal noise. Here, we present a theoretical scheme for force sensing that incorporates an optical parametric amplifier (OPA) in conjunction with a gain-assisted auxiliary cavity. We show that, in contrast to conventional lossy configurations, the presence of optical gain in the auxiliary cavity enables a substantial enhancement in sensitivity, allowing the system to exceed the standard quantum limit across a broad detection bandwidth. By carefully tuning the gain parameter, cavity-cavity coupling strength, OPA driving phase, and detuning conditions, the system achieves optimal noise suppression. Remarkably, this performance persists even under a twentyfold increase in environmental temperature, underscoring the robustness of the proposed scheme. Detailed noise analysis reveals that the contribution of the gain-assisted auxiliary cavity appears to be a negative value in the noise spectrum, effectively reducing the overall noise level of the system. This study is of significant importance to the design and fabrication of high-performance optomechanical sensors.

Optics Express•Aug 25, 2025•0 citations
Abstract Amplifier is at the heart of experiments carrying out the precise measurement of a weak signal. An idea quantum amplifier should have a large gain and minimum added noise simultaneously. Here, we consider the quantum measurement properties of the cavity with the OPA medium in the op-amp mode to amplify an input signal. We show that our nonlinear-cavity quantum amplifier has large gain in the single-value stable regime and achieves quantum limit unconditionally.
Recently optical parametric amplifiers (OPAs) with vacuum inputs have been extensively studied and shown to generate a significant amount of squeezing, but little is known about the quantum noise behavior of an OPA with an injected signal field. We have performed a linearized quantum analysis of a nondegenerate OPA operated in the saturated gain regime showing that the amplified output intensity of a coherent-state input signal becomes squeezed when the classical small-signal gain falls below unity. In uses such as master-oscillator power amplifiers, for which the signal of interest is the mean output intensity, the output signal-to-noise ratio (SNR) can be higher than the input SNR over a broad operating range. For an OPA pumped at 90% of threshold, the SNR improvement is about a factor of 3, and with a 10-Db amplitude squeezed pump, the improvement increases to about a factor of 7. Such a tunable gain-saturated OPA with large-signal gain and improved SNR can be potentially useful in digital communication.
Optical parametric amplifiers (OPAs) are promising to overcome the wavelength coverage and noise limitations in conventional optical amplifiers based on rare-earth doping and semiconductor gain. However, the high power requirement remains a major obstacle to the widespread use of OPAs. Integrated OPAs can in principle improve the pump efficiency with tight mode confinement; however, challenges associated with propagation loss, limited nonlinearity, and susceptibility to nanoscale fabrication imperfections prevent them from competing with conventional bulk and fiber-based OPAs. Here, we demonstrate a highly efficient integrated OPAs with continuous-wave net gain. The pump efficiency is improved by over one order of magnitude. Phase-sensitive gain of 23.5 dB is demonstrated, significantly exceeding previous integrated OPAs, using only 110 mW pump power and no cavity enhancement. This is achieved with parametric down-conversion in thin-film lithium niobate waveguides using the adapted poling technique to maintain the coherence of nonlinear interactions. Moreover, the high parametric gain exceeds fibre-chip-fibre losses, leading to appreciable net gain up to 10 dB. The 3 dB bandwidth is approximately 120 nm, covering telecommunication S-, C-, and Lbands. Quantum-limited noise performance is confirmed through the measurement of output field fluctuation below the classical limit. We further demonstrate that signalto-noise ratio in noisy optical communications can be increased by leveraging this efficient integrated OPA. Our work marks a significant step towards ideal optical amplifiers with strong amplification, high efficiency, quantum-limited noise, large bandwidth, and continuous-wave operation, unlocking new possibilities for next-generation photonic information processing systems.
Optical Parametric Amplifiers (OPA) have been of wide interest for the past decades due to their potential for low noise amplification and generation of squeezed light. However, the existing OPAs for fiber applications are based on Kerr effect and require from few centimeters to kilometers of fiber for significant gain. In this thesis, I review the principles of phase sensitive amplification and derive the expression for gain of a lossless Kerr medium based Nonlinear Mach-Zehnder Interferometer (NMZI OPA) using a classical physics model . Using quantum optics, I calculate the noise of a lossless Kerr medium based OPA and show that the noise figure can be close to zero. Since in real life a Kerr medium is lossy, using quantum electrodynamics, I derive equations for the evolution of a wave propagating in a lossy Kerr medium such as an optical fiber. I integrate these equations in order to obtain the parametric gain, the noise and the noise figure. I demonstrate that the noise figure has a simple expression as a function of loss coefficient and length of the Kerr medium and that the previously published results by a another research group are incorrect. I also develop a simple expression for the noise figure for high gain parametric amplifiers with distributed loss or gain. In order to enable construction of compact parametric amplifiers I consider using different nonlinear media, in particular a Saturable Absorber (SA) and a Semiconductor Optical Amplifier (SOA). Using published results on the noise from SOA I conclude that that such device would be prohibitively noisy. Therefore, I perform a detailed analysis of noise properties of a SA based parametric amplifier. Using a quantum mechanical model of an atomic 3 level system and the Heisenberg's equations, I analyze the evolution in time of a single mode coherent optical wave interacting with a saturable absorber. I solve the simultaneous differential equations and find the expression for the noise figure of the SA based NMZI OPA. The results show that noise figure is still undesirably high. The source of the noise is identified. A new approach for low noise parametric amplifier operating with short pulses is proposed.
Optical parametric amplifiers (OPA's) and optical parametric oscillators (OPO's) can exhibit squeezed amplification when an injected signal beam is used to elicit small-signal gain saturation. This paper extends previous work on OPA/OPO noise behavior under signal injection. Doubly resonant and triply resonant, single-ended cavities are considered in the good-cavity limit. Owing to the nonlinear coupling between the signal and idler beams within the cavity, both are sensitive to the detuning of each beam from its respective resonance. Signal and idler output noise spectra are found by linearizing the quantum coupled-mode equations about the classical mean-field solutions. Cavity detunings lead to frequency dependent phase shifts between the low-noise and high-noise quadratures of both the signal and idler beams. Moreover, the phase of the low-noise quadrature need not coincide with that of the corresponding mean field. The resulting large-signal, signal-to-noise ratio improvement afforded by squeezed amplification is therefore sensitive to the cavity detunings. The effects of classical excess noise on the pump beam and the injected signal beam are also considered.
High-gain amplifiers of electromagnetic signals operating near the quantum limit are crucial for quantum information systems and ultrasensitive quantum measurements.However, the existing techniques have a limited gain-bandwidth product and only operate with weak input signals.Here, we demonstrate a two-port optomechanical scheme for amplification and routing of microwave signals, a system that simultaneously performs high-gain amplification and frequency conversion in the quantum regime.Our amplifier, implemented in a two-cavity microwave optomechanical device, shows 41 dB of gain and has a high dynamic range, handling input signals up to 10 13 photons per second, 3 orders of magnitude more than corresponding Josephson parametric amplifiers.We show that although the active medium, the mechanical resonator, is at a high temperature far from the quantum limit, only 4.6 quanta of noise is added to the input signal.Our method can be readily applied to a wide variety of optomechanical systems, including hybrid optical-microwave systems, creating a universal hub for signals at the quantum level.
The detection of weak forces plays a crucial role in various fields, from gravitational wave astronomy to biological sensing. A fundamental limitation in such measurements arises from quantum and thermal noise. Here, we present a theoretical scheme for force sensing that incorporates an optical parametric amplifier (OPA) in conjunction with a gain-assisted auxiliary cavity. We show that, in contrast to conventional lossy configurations, the presence of optical gain in the auxiliary cavity enables a substantial enhancement in sensitivity, allowing the system to exceed the standard quantum limit across a broad detection bandwidth. By carefully tuning the gain parameter, cavity-cavity coupling strength, OPA driving phase, and detuning conditions, the system achieves optimal noise suppression. Remarkably, this performance persists even under a twentyfold increase in environmental temperature, underscoring the robustness of the proposed scheme. Detailed noise analysis reveals that the contribution of the gain-assisted auxiliary cavity appears to be a negative value in the noise spectrum, effectively reducing the overall noise level of the system. This study is of significant importance to the design and fabrication of high-performance optomechanical sensors.