Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1603.01099 · Optics Express

Design and characterization of integrated components for SiN photonic quantum circuits

Menno Poot, Carsten Schuck, Xiao‐Song Ma, Xiang Guo, Hong X. Tang

Published Mar 21, 2016• 48 citations
arXivHTMLPDF

Abstract

The design, fabrication, and detailed calibration of essential building blocks towards fully integrated linear-optics quantum computation are discussed. Photonic devices are made from silicon nitride rib waveguides, where measurements on ring resonators show small propagation losses. Directional couplers are designed to be insensitive to fabrication variations. Their offset and coupling lengths are measured, as well as the phase difference between the transmitted and reflected light. With careful calibrations, the insertion loss of the directional couplers is found to be small. Finally, an integrated controlled-NOT circuit is characterized by measuring the transmission through different combinations of inputs and outputs. The gate fidelity for the CNOT operation with this circuit is estimated to be 99.81% after post selection. This high fidelity is due to our robust design, good fabrication reproducibility, and extensive characterizations.

DOI
10.1364/oe.24.006843

Related papers

Integrated programmable waveguide circuits for classical and quantum photonic processing

Caterina Taballione

Programmable waveguide circuits are crucial building blocks for integrated spectrometric applications and quantum photonic information processing. Amongst the dielectric material platforms in integrated photonics, silicon nitride stands out with highly attractive properties such as a large bandgap energy and a moderately high index contrast. This allows low propagation losses in a wide spectral range while simultaneously allowing a dense packing of components. The aforementioned properties, together with the inherent phase stability and phase programmability achievable in silicon nitride, enable the creation of complex photonic circuits. In this thesis we describe and demonstrate densely integrated programmable photonic circuits based on silicon nitride waveguides for wavelength metrology and quantum information processing. We concentrate on reconfigurable photonic integrated circuits based on silicon nitride waveguides with low-loss propagation, to explore interference in the spectral and temporal domain for advanced applications. We investigated two types of integrated interferometric devices featuring low loss in combination with programmability for classical and quantum photonic processing. The first is simple tunable microring resonator circuits in combination with neural network data processing for the analysis of classical light in the spectral domain as wavelength meter. The second is a complex tunable network of waveguide interferometers for controlling quantum correlations (coincidences) between single photons. Exploiting the long-term interferometric stability, low propagation loss and tight optical confinement of integrated silicon nitride waveguides, we have shown complex reconfigurable optical circuits both for classical and quantum photonic processing. For future development of integrated programmable photonic processors, various challenges need to be addressed such as compact and low-power phase shifters, a further increase of the component density and lower the propagation losses.

•Jun 5, 2019•1 citation

High-fidelity CNOT gates in photonic integrated circuits using composite segmented directional couplers

Yonatan Piasetzky, Yuval Warshavsky, Haim Suchowski +4 more

Directional couplers are fundamental building blocks for integrated quantum photonic circuits but are highly sensitive to fabrication imperfections. We demonstrate that composite segmented directional couplers (CSDCs) enhance gate fidelity without active tuning. We design and fabricate fully integrated photonic controlled-NOT (CNOT) gates using both uniform and composite coupler variants and compare their performance via simulation, classical characterization, and quantum two-photon interference. The composite design reduces the average computational-basis error probability by nearly a factor of two and variability by a factor of five, with residual error primarily limited by photon indistinguishability. These results establish CSDCs as passive, foundry-compatible building blocks for scalable quantum photonic circuits.

arXiv:2509.25505•Optica Quantum•Oct 20, 2026•6 citations

Quantum optics in silicon nanophotonics

Heedeuk Shin

Silicon-on-insulator (SOI) wafers have been developed for electronic integrated circuits, but are also one of the most promising platforms in photonic integrated circuits due to its low loss, high refractive index, ability to fast phase modulation, and well-developed fabrication technologies. With advantages to handle light with a small volume and high modulation speed, silicon photonics has been intensively investigated as the next generation platform of signal processing, interconnection, and communication devices. Recently, silicon photonics has been attracted great interests in quantum optics communities as optical quantum systems for linear optical quantum computing are achievable using silicon photonic components including beam splitters, phase modulators, and filters and the small footprint of a silicon photonic quantum system has unprecedented performances of high stability and scalability. Here we show our recent results on the fabrication of silicon photonic elements for quantum applications. We fabricated low-loss optical waveguides, efficient fiber-to-waveguide grating couplers, resonator-based optical filters, and tunable beam splitters and tested their performances. A micro-sized heater is attached on a Mach-Zehnder interferometer, showing stable operation as a slow phase modulator. In addition, phase modulators using plasma dispersion effects are under investigation. Finally, the quantum characteristics of photon pairs generated by spontaneous four-wave mixing in silicon waveguides are investigated. These results will be an essential cornerstone for the realization of quantum optical computing and quantum communication devices.

•Apr 25, 2019•0 citations

Silicon Photonic Integrated Circuit for Linear Optics Quantum Computing

Thu Ha Dao

Linear Optics Quantum Computing can be achieved by implementing a complete Silicon Photonic Integrated Circuit. This involves optimizing the layout and fabrication of photonic circuits tailored for quantum computing applications using linear optics principles. A prototype of this kind of circuit is the universal two-qubit Controlled-NOT gate. This scheme makes use of linear, coincidence basis gate that performs all the operations of a controlled-NOT gate and requires only single photons at the input. The key components in the photonic quantum circuit using the CNOT gate scheme are designed and simulated. Subsequently, the layouts for the chips incorporating the optimal parameters identified in simulations of all the components are designed.

Italian Conference on Optics and Photonics (ICOP)•Jun 17, 2024•0 citations

Controlled-NOT operation of SiN-photonic circuit using photon pairs from silicon-photonic circuit

Jong-Moo Lee, Wook‐Jae Lee, Minsu Kim +4 more

We demonstrate controlled-NOT (CNOT) operation of a silicon nitride photonic integrated circuit using path-entangled photon pairs from a silicon-photonic integrated circuit as logical inputs. The CNOT gate is constructed by combining several silicon-nitride Mach–Zehnder interferometers for a linear-optical quantum gate. We package each of the two photonic circuits with electrical wire bonding and optical fiber bonding for stable measurement. The logical-basis fidelity of CNOT operation is measured better than 81% for the fully packaged photonic circuits.

Optics Communications•Dec 29, 2021•19 citations

High-fidelity quantum state evolution in imperfect photonic integrated circuits

Jacob Mower, Nicholas C. Harris, Gregory R. Steinbrecher +2 more

We propose and analyze the design of a programmable photonic integrated circuit for high-fidelity quantum computation and simulation. We demonstrate that the reconfigurability of our design allows us to overcome two major impediments to quantum optics on a chip: it removes the need for a full fabrication cycle for each experiment and allows for compensation of fabrication errors using numerical optimization techniques. Under a pessimistic fabrication model for the silicon-on-insulator process, we demonstrate a dramatic fidelity improvement for the linear optics controlled-not and controlled-phase gates and, showing the scalability of this approach, the iterative phase estimation algorithm built from individually optimized gates. We also propose and simulate an experiment that the programmability of our system would enable: a statistically robust study of the evolution of entangled photons in disordered quantum walks. Overall, our results suggest that existing fabrication processes are sufficient to build a quantum photonic processor capable of high-fidelity operation.

arXiv:1406.3255•Physical Review A•Sep 22, 2015•100 citations
The design, fabrication, and detailed calibration of essential building blocks towards fully integrated linear-optics quantum computation are discussed. Photonic devices are made from silicon nitride rib waveguides, where measurements on ring resonators show small propagation losses. Directional couplers are designed to be insensitive to fabrication variations. Their offset and coupling lengths are measured, as well as the phase difference between the transmitted and reflected light. With careful calibrations, the insertion loss of the directional couplers is found to be small. Finally, an integrated controlled-NOT circuit is characterized by measuring the transmission through different combinations of inputs and outputs. The gate fidelity for the CNOT operation with this circuit is estimated to be 99.81% after post selection. This high fidelity is due to our robust design, good fabrication reproducibility, and extensive characterizations.
Programmable waveguide circuits are crucial building blocks for integrated spectrometric applications and quantum photonic information processing. Amongst the dielectric material platforms in integrated photonics, silicon nitride stands out with highly attractive properties such as a large bandgap energy and a moderately high index contrast. This allows low propagation losses in a wide spectral range while simultaneously allowing a dense packing of components. The aforementioned properties, together with the inherent phase stability and phase programmability achievable in silicon nitride, enable the creation of complex photonic circuits. In this thesis we describe and demonstrate densely integrated programmable photonic circuits based on silicon nitride waveguides for wavelength metrology and quantum information processing. We concentrate on reconfigurable photonic integrated circuits based on silicon nitride waveguides with low-loss propagation, to explore interference in the spectral and temporal domain for advanced applications. We investigated two types of integrated interferometric devices featuring low loss in combination with programmability for classical and quantum photonic processing. The first is simple tunable microring resonator circuits in combination with neural network data processing for the analysis of classical light in the spectral domain as wavelength meter. The second is a complex tunable network of waveguide interferometers for controlling quantum correlations (coincidences) between single photons. Exploiting the long-term interferometric stability, low propagation loss and tight optical confinement of integrated silicon nitride waveguides, we have shown complex reconfigurable optical circuits both for classical and quantum photonic processing. For future development of integrated programmable photonic processors, various challenges need to be addressed such as compact and low-power phase shifters, a further increase of the component density and lower the propagation losses.
Directional couplers are fundamental building blocks for integrated quantum photonic circuits but are highly sensitive to fabrication imperfections. We demonstrate that composite segmented directional couplers (CSDCs) enhance gate fidelity without active tuning. We design and fabricate fully integrated photonic controlled-NOT (CNOT) gates using both uniform and composite coupler variants and compare their performance via simulation, classical characterization, and quantum two-photon interference. The composite design reduces the average computational-basis error probability by nearly a factor of two and variability by a factor of five, with residual error primarily limited by photon indistinguishability. These results establish CSDCs as passive, foundry-compatible building blocks for scalable quantum photonic circuits.
Silicon-on-insulator (SOI) wafers have been developed for electronic integrated circuits, but are also one of the most promising platforms in photonic integrated circuits due to its low loss, high refractive index, ability to fast phase modulation, and well-developed fabrication technologies. With advantages to handle light with a small volume and high modulation speed, silicon photonics has been intensively investigated as the next generation platform of signal processing, interconnection, and communication devices. Recently, silicon photonics has been attracted great interests in quantum optics communities as optical quantum systems for linear optical quantum computing are achievable using silicon photonic components including beam splitters, phase modulators, and filters and the small footprint of a silicon photonic quantum system has unprecedented performances of high stability and scalability. Here we show our recent results on the fabrication of silicon photonic elements for quantum applications. We fabricated low-loss optical waveguides, efficient fiber-to-waveguide grating couplers, resonator-based optical filters, and tunable beam splitters and tested their performances. A micro-sized heater is attached on a Mach-Zehnder interferometer, showing stable operation as a slow phase modulator. In addition, phase modulators using plasma dispersion effects are under investigation. Finally, the quantum characteristics of photon pairs generated by spontaneous four-wave mixing in silicon waveguides are investigated. These results will be an essential cornerstone for the realization of quantum optical computing and quantum communication devices.
Linear Optics Quantum Computing can be achieved by implementing a complete Silicon Photonic Integrated Circuit. This involves optimizing the layout and fabrication of photonic circuits tailored for quantum computing applications using linear optics principles. A prototype of this kind of circuit is the universal two-qubit Controlled-NOT gate. This scheme makes use of linear, coincidence basis gate that performs all the operations of a controlled-NOT gate and requires only single photons at the input. The key components in the photonic quantum circuit using the CNOT gate scheme are designed and simulated. Subsequently, the layouts for the chips incorporating the optimal parameters identified in simulations of all the components are designed.
We demonstrate controlled-NOT (CNOT) operation of a silicon nitride photonic integrated circuit using path-entangled photon pairs from a silicon-photonic integrated circuit as logical inputs. The CNOT gate is constructed by combining several silicon-nitride Mach–Zehnder interferometers for a linear-optical quantum gate. We package each of the two photonic circuits with electrical wire bonding and optical fiber bonding for stable measurement. The logical-basis fidelity of CNOT operation is measured better than 81% for the fully packaged photonic circuits.
We propose and analyze the design of a programmable photonic integrated circuit for high-fidelity quantum computation and simulation. We demonstrate that the reconfigurability of our design allows us to overcome two major impediments to quantum optics on a chip: it removes the need for a full fabrication cycle for each experiment and allows for compensation of fabrication errors using numerical optimization techniques. Under a pessimistic fabrication model for the silicon-on-insulator process, we demonstrate a dramatic fidelity improvement for the linear optics controlled-not and controlled-phase gates and, showing the scalability of this approach, the iterative phase estimation algorithm built from individually optimized gates. We also propose and simulate an experiment that the programmability of our system would enable: a statistically robust study of the evolution of entangled photons in disordered quantum walks. Overall, our results suggest that existing fabrication processes are sufficient to build a quantum photonic processor capable of high-fidelity operation.