Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1512.06723 · Journal of Physics B Atomic Molecular and Optical Physics

Direct loading of a large Yb MOT on the 1 S 0 → 3 P 1 transition

Alexander Guttridge, S. A. Hopkins, S. L. Kemp, D Boddy, R. Freytag, M. P. A. Jones, Michael R. Tarbutt, E. A. Hinds, Simon L. Cornish

Published Jun 28, 2016• 32 citations
arXivHTMLPDF

Abstract

Abstract We report a robust technique for laser frequency stabilisation that enables the reproducible loading of in excess of 10 9 Yb atoms from a Zeeman slower directly into a magneto-optical trap (MOT) operating on the 1 S 0 → 3 P 1 transition, without the need for a first stage MOT on the 1 S 0 → 1 P 1 transition. We use a simple atomic beam apparatus to generate narrow fluorescence signals on both the 399 nm 1 S 0 → 1 P 1 transition used for the Zeeman slower and the 556 nm 1 S 0 → 3 P 1 transition. We present in detail the methods for obtaining spectra with a high signal-to-noise ratio and demonstrate error signals suitable for robust frequency stabilisation. Finally we demonstrate the stability and precision of our technique through sensitive measurements of the gravitational sag of the Yb MOT as a function of the intensity of the laser cooling beams, which are in good agreement with theory. These results will be important for efficient loading of the atoms into an optical dipole trap.

DOI
10.1088/0953-4075/49/14/145006

Related papers

Narrow-line magneto-optical trap for dysprosium atoms

T. Maier, H. Kadau, M. Schmitt +2 more

We present our technique to create a magneto-optical trap (MOT) for dysprosium atoms using the narrow-line cooling transition at 626 nm to achieve suitable conditions for direct loading into an optical dipole trap. The MOT is loaded from an atomic beam via a Zeeman slower using the strongest atomic transition at 421 nm. With this combination of two cooling transitions we can trap up to 2.0·10(8) atoms at temperatures down to 6 μK. This cooling approach is simpler than present work with ultracold dysprosium and provides similar starting conditions for a transfer to an optical dipole trap.

arXiv:1403.1499•Optics Letters•May 16, 2014•64 citations

Magneto-Optical Trapping of Ytterbium Atoms with a 398.9 nm Laser

Zhao Peng-Yi, Xiong Zhuan-Xian, Jie Liang +2 more

We report the realization of ytterbium magneto-optical trap (MOT) operating on the dipole-allowed 1 S 0 — 1 P 1 transition at 398.9 nm. The MOT is loaded by a slowed atomic beam produced by a Zeeman slower. All seven stable isotopes of Yb atoms could be trapped separately at different laser detuning values. Over 10 7 174 Yb atoms are collected in the MOT, whereas the atom number of fermionic isotope 171 Yb is roughly 2.3 × 10 6 due to a lower abundance. Without the Zeeman slower, the trapped atom numbers are one order of magnitude lower. Both the even and odd isotopes are recognized as excellent candidates of optical clock transition, so the cooling and trapping of ytterbium atoms by the blue MOT is an important step for building an optical clock.

Chinese Physics Letters•Oct 1, 2008•16 citations

Loading of a large Yb MOT on the 1 S 0 → 1 P 1 transition

Hector Letellier, Álvaro Mitchell Galvão de Melo, A. Dorne +1 more

We present an experimental setup to laser cool and trap a large number of ytterbium atoms. Our design uses an oven with an array of micro-tubes for efficient collimation of the atomic beam, and we implement a magneto-optical trap of 174Yb on the 1S0 → 1P1 transition at 399 nm. Despite the absence of a Zeeman slower, we obtain a loading of 4 × 109 at./s. We trap up to N = 109 at., where light-assisted collisions become the dominant loss mechanism. We precisely characterize our atomic beam, the loading rate of the magneto-optical trap, and several loss mechanisms relevant for trapping a large number of atoms.

arXiv:2308.00387•Review of Scientific Instruments•Dec 1, 2023•16 citations

Crossed-beam slowing to enhance narrow-line ytterbium magneto-optic traps

Benjamin Plotkin-Swing, Anna Wirth-Singh, Daniel Gochnauer +3 more

We demonstrate a method to enhance the atom loading rate of a ytterbium (Yb) magneto-optic trap (MOT) operating on the 556 nm 1S0 → 3P1 intercombination transition (narrow linewidth Γg = 2π × 182 kHz). Following traditional Zeeman slowing of an atomic beam near the 399 nm 1S0 → 1P1 transition (broad linewidth Γp = 2π × 29 MHz), two laser beams in a crossed-beam geometry, frequency tuned near the same transition, provide additional slowing immediately prior to the MOT. Using this technique, we observe an improvement by a factor of 6 in the atom loading rate of a narrow-line Yb MOT. The relative simplicity and generality of this approach make it readily adoptable to other experiments involving narrow-line MOTs. We also present a numerical simulation of this two-stage slowing process, which shows good agreement with the observed dependence on experimental parameters, and use it to assess potential improvements to the method.

arXiv:2004.10298•Review of Scientific Instruments•Sep 1, 2020•19 citations

Direct loading of Yb atoms into a 3D magneto-optical trap from a dispenser atomic source

Junia Nomura, Tomohiko Momma, Yuki Kojima +4 more

The realization of cold atoms using a compact and low-power-consumption experimental setup is indispensable for cold atom experiments, including optical clocks and quantum simulations. We demonstrate the direct loading of Yb atoms into a 3D magneto-optical trap (MOT) from a dispenser atomic source without using a Zeeman slower. The power consumption of the dispenser was ∼3 W. Spectroscopy of the atomic beam from the dispenser on the 6s2 1S0–6s6p 1P1 Yb transition at 399 nm shows that the flux of the atomic beam reaches 1.4 × 1013 s−1 cm−2. We can load up to 4.1 × 107 atoms into the MOT with slowing and trapping laser powers of 20.3 and 35.0 mW, respectively. The realized cold atom system is reliable and can be adapted for experiments on alkaline earth and other alkaline earth-like atoms.

AIP Advances•Feb 1, 2023•6 citations

Efficient Loading of an Yb MOT on the 1S0 → 1P1 Transition

Zhufang Zhao, Shunxiang Wang, Jun Jian +5 more

We demonstrate efficient loading of an Yb three-dimensional magneto-optical trap (3D MOT) on the 1S0 → 1P1 transition. The experiment employs a two-dimensional magneto-optical trap (2D MOT) as an efficient cold atom source. Through optimization of the 2D MOT, auxiliary Zeeman slower, and push beam parameters that govern atomic capture, we achieve an atomic loading rate of 5 × 106 atoms/s in the 3D MOT, with approximately ∼107 trapped atoms. Our experimental results confirm the successful transfer of a substantial number of atoms from the 2D region to the science chamber via the push beam, providing an experimental foundation for subsequent implementation of narrow-line MOT and two-color MOT.

Photonics•Oct 28, 2025•1 citation
Abstract We report a robust technique for laser frequency stabilisation that enables the reproducible loading of in excess of 10 9 Yb atoms from a Zeeman slower directly into a magneto-optical trap (MOT) operating on the 1 S 0 → 3 P 1 transition, without the need for a first stage MOT on the 1 S 0 → 1 P 1 transition. We use a simple atomic beam apparatus to generate narrow fluorescence signals on both the 399 nm 1 S 0 → 1 P 1 transition used for the Zeeman slower and the 556 nm 1 S 0 → 3 P 1 transition. We present in detail the methods for obtaining spectra with a high signal-to-noise ratio and demonstrate error signals suitable for robust frequency stabilisation. Finally we demonstrate the stability and precision of our technique through sensitive measurements of the gravitational sag of the Yb MOT as a function of the intensity of the laser cooling beams, which are in good agreement with theory. These results will be important for efficient loading of the atoms into an optical dipole trap.
We present our technique to create a magneto-optical trap (MOT) for dysprosium atoms using the narrow-line cooling transition at 626 nm to achieve suitable conditions for direct loading into an optical dipole trap. The MOT is loaded from an atomic beam via a Zeeman slower using the strongest atomic transition at 421 nm. With this combination of two cooling transitions we can trap up to 2.0·10(8) atoms at temperatures down to 6 μK. This cooling approach is simpler than present work with ultracold dysprosium and provides similar starting conditions for a transfer to an optical dipole trap.
We report the realization of ytterbium magneto-optical trap (MOT) operating on the dipole-allowed 1 S 0 — 1 P 1 transition at 398.9 nm. The MOT is loaded by a slowed atomic beam produced by a Zeeman slower. All seven stable isotopes of Yb atoms could be trapped separately at different laser detuning values. Over 10 7 174 Yb atoms are collected in the MOT, whereas the atom number of fermionic isotope 171 Yb is roughly 2.3 × 10 6 due to a lower abundance. Without the Zeeman slower, the trapped atom numbers are one order of magnitude lower. Both the even and odd isotopes are recognized as excellent candidates of optical clock transition, so the cooling and trapping of ytterbium atoms by the blue MOT is an important step for building an optical clock.
We present an experimental setup to laser cool and trap a large number of ytterbium atoms. Our design uses an oven with an array of micro-tubes for efficient collimation of the atomic beam, and we implement a magneto-optical trap of 174Yb on the 1S0 → 1P1 transition at 399 nm. Despite the absence of a Zeeman slower, we obtain a loading of 4 × 109 at./s. We trap up to N = 109 at., where light-assisted collisions become the dominant loss mechanism. We precisely characterize our atomic beam, the loading rate of the magneto-optical trap, and several loss mechanisms relevant for trapping a large number of atoms.
We demonstrate a method to enhance the atom loading rate of a ytterbium (Yb) magneto-optic trap (MOT) operating on the 556 nm 1S0 → 3P1 intercombination transition (narrow linewidth Γg = 2π × 182 kHz). Following traditional Zeeman slowing of an atomic beam near the 399 nm 1S0 → 1P1 transition (broad linewidth Γp = 2π × 29 MHz), two laser beams in a crossed-beam geometry, frequency tuned near the same transition, provide additional slowing immediately prior to the MOT. Using this technique, we observe an improvement by a factor of 6 in the atom loading rate of a narrow-line Yb MOT. The relative simplicity and generality of this approach make it readily adoptable to other experiments involving narrow-line MOTs. We also present a numerical simulation of this two-stage slowing process, which shows good agreement with the observed dependence on experimental parameters, and use it to assess potential improvements to the method.
The realization of cold atoms using a compact and low-power-consumption experimental setup is indispensable for cold atom experiments, including optical clocks and quantum simulations. We demonstrate the direct loading of Yb atoms into a 3D magneto-optical trap (MOT) from a dispenser atomic source without using a Zeeman slower. The power consumption of the dispenser was ∼3 W. Spectroscopy of the atomic beam from the dispenser on the 6s2 1S0–6s6p 1P1 Yb transition at 399 nm shows that the flux of the atomic beam reaches 1.4 × 1013 s−1 cm−2. We can load up to 4.1 × 107 atoms into the MOT with slowing and trapping laser powers of 20.3 and 35.0 mW, respectively. The realized cold atom system is reliable and can be adapted for experiments on alkaline earth and other alkaline earth-like atoms.
We demonstrate efficient loading of an Yb three-dimensional magneto-optical trap (3D MOT) on the 1S0 → 1P1 transition. The experiment employs a two-dimensional magneto-optical trap (2D MOT) as an efficient cold atom source. Through optimization of the 2D MOT, auxiliary Zeeman slower, and push beam parameters that govern atomic capture, we achieve an atomic loading rate of 5 × 106 atoms/s in the 3D MOT, with approximately ∼107 trapped atoms. Our experimental results confirm the successful transfer of a substantial number of atoms from the 2D region to the science chamber via the push beam, providing an experimental foundation for subsequent implementation of narrow-line MOT and two-color MOT.