We report on the observation of bright emission of single photons under pulsed resonance fluorescence conditions from a single quantum dot (QD) in a micropillar cavity. The brightness of the QD fluorescence is greatly enhanced via the coupling to the fundamental mode of a micropillar, allowing us to determine a single photon extraction efficiency of (20.7 ± 0.8) % per linear polarization basis. This yields an overall extraction efficiency of (41.4 ± 1.5) % in our device. We observe the first Rabi-oscillation in a weakly coupled quantum dot-micropillar system under coherent pulsed optical excitation, which enables us to deterministically populate the excited QD state. In this configuration, we probe the single photon statistics of the device yielding g(2)(0) = 0.072 ± 0.011 at a QD-cavity detuning of 75 μeV.
We report on the observation of bright emission of single photons under pulsed resonance fluorescence conditions from a single quantum dot (QD) in a micropillar cavity. The brightness of the QD fluorescence is greatly enhanced via the coupling to the fundamental mode of a micropillar, allowing us to determine a single photon extraction efficiency of (20.7 ± 0.8) % per linear polarization basis. This yields an overall extraction efficiency of (41.4 ± 1.5) % in our device. We observe the first Rabi-oscillation in a weakly coupled quantum dot-micropillar system under coherent pulsed optical excitation, which enables us to deterministically populate the excited QD state. In this configuration, we probe the single photon statistics of the device yielding g(2)(0) = 0.072 ± 0.011 at a QD-cavity detuning of 75 μeV.
Scalable photonic quantum technologies require on-demand single-photon sources with simultaneously high levels of purity, indistinguishability, and efficiency. These key features, however, have only been demonstrated separately in previous experiments. Here, by s-shell pulsed resonant excitation of a Purcell-enhanced quantum dot-micropillar system, we deterministically generate resonance fluorescence single photons which, at π pulse excitation, have an extraction efficiency of 66%, single-photon purity of 99.1%, and photon indistinguishability of 98.5%. Such a single-photon source for the first time combines the features of high efficiency and near-perfect levels of purity and indistinguishabilty, and thus opens the way to multiphoton experiments with semiconductor quantum dots.
Applying continuous-wave pure resonant s-shell optical excitation of individual quantum dots in a high-quality micropillar cavity, we demonstrate the generation of post-selected indistinguishable photons in resonance fluorescence. Close to ideal visibility contrast of 90% is verified by polarization-dependent Hong-Ou-Mandel two-photon interference measurements. Furthermore, a strictly resonant continuous-wave excitation together with controlling the spontaneous emission lifetime of the single quantum dots via tunable emitter-mode coupling (Purcell) is proven as a versatile scheme to generate close to Fourier transform-limited (T2/(2T1)=0.91) single photons even at 80% of the emission saturation level.
Next-generation information technology is expected to rely on discrete two-state quantum systems that can deterministically emit single photons. Quantum dots are mesoscopic (~10,000 atoms large) semiconductor islands grown in a host crystal of larger band-gap that make well-defined two-level quantum systems and are very attractive due to stability, record coherence times, and the possibility of integrating them into larger structures, such as optical microcavities. This work presents experimental progress towards understanding the coherent optical processes that occur in single quantum dots, particularly such phenomena that might be one day utilized for quantum communication applications. High resolution low temperature optical spectroscopy is used in conjunction with first order (amplitude) and second-order (intensity) correlation measurements of the emitted field. A novel technique is introduced that is capable of harvesting the fluorescence of single dots at the same frequency as the laser, previously impossible due to insurmountable scattering. This technique enables the observation, for the first time, of single quantum dot resonance fluorescence, in both the weak and strong excitation regimes, which forms the basis for deterministic generation of single photons. Guided by the rich theoretical description available from quantum optics with atoms we obtain insight into the complex dynamics of this driven system. Quantum dots confined to novel optical microcavities were further investigated using micro photoluminescence. An optical microcavity properly coupled to a two-level system can profoundly modify its emission characteristics via quantum electrodynamical effects, which are highly attractive for single photon sources. The all-epitaxial structures we probe are distinguished by a bulk morphology that overcomes the fragility problems of existing approaches, and provides high quality factors as well as small mode volumes. Lasing is obtained with larger strucutres. Additionally, isolation of individual dots is further realized in smaller cavities and the Purcell effect observed in time-resolved photon counting experiments.
Giant optical nonlinearity is observed under both continuous wave and pulsed excitation in a deterministically coupled quantum dot-micropillar system, in a pronounced strong-coupling regime. Using absolute reflectivity measurements we determine the critical intracavity photon number as well as the input and output coupling efficiencies of the device. Thanks to a near-unity input-coupling efficiency, we demonstrate a record nonlinearity threshold of only 8 incident photons per pulse. The output-coupling efficiency is found to strongly influence this nonlinearity threshold. We show how the fundamental limit of single-photon nonlinearity can be attained in realistic devices, which would provide an effective interaction between two coincident single-photons.
In 1946, E. M. Purcell predicted that the radiative lifetime of an emitter is not an intrinsic property but can be modified by structuring the surrounding electromagnetic field [36]. By inserting a semiconductor quantum dot (QD) in an optical cavity, one can accelerate or inhibit its spontaneous emission. In the present article, we show that the QD spontaneous emission can be deterministically controlled to fabricate bright sources of quantum light. QDs in cavities: basics, motivation, first demonstrations Light-matter coupling We note f the ground state of the QD and e its excited state. For a cavity mode close to resonance with the QD optical transition, we consider only the states with 0 or 1 photon in the cavity mode. The states ∣ e, 0〉 and ∣ f, 1〉 are coupled through light–matter interaction, with a constant g , where h g = ∣〈 e, 0∣ Ed ∣ f, 1∣, with d the dipole of the optical transition e → f and E the electric field at the QD position. Each of the states ∣ e, 0 > and ∣ f, 1 > are also coupled to continua of states: continuum of the free-space optical mode, phonons of the semiconductor matrix, etc. [4]. Here, we consider only the coupling to the continuum of the free-space optical mode, related to the cavity losses, with a constant γ c . When g << γ c , the photon emitted by the recombination of an exciton efficiently escapes outside the cavity. The QD optical transition radiative recombination rate can be accelerated (Purcell effect) or inhibited.