A one-dimensional quantum oscillator is monitored by taking repeated position measurements. As a first contribution, it is shown that, under a quantum nondemolition measurement scheme applied to a system initially at the ground state, (i) the observed sequence of measurements (quantum tracks) corresponding to a single experiment converges to a limit point, and that (ii) the limit point is random over the ensemble of the experiments, being distributed as a zero-mean Gaussian random variable with a variance at most equal to the ground-state variance. As a second contribution, the richer scenario where the oscillator is coupled with a frozen (i.e., at the ground state) ensemble of independent quantum oscillators is considered. A sharply different behavior emerges: under the same measurement scheme, here we observe that the measurement sequences are essentially divergent. Such a rigorous statistical analysis of the sequential measurement process might be useful for characterizing the main quantities that are currently used for inference, manipulation, and monitoring of many quantum systems. Several interesting properties of the quantum tracks evolution, as well as of the associated (quantum) threshold crossing times, are discussed and the dependence upon the main system parameters (e.g., the choice of the measurement sampling time, the degree of interaction with the environment, the measurement device accuracy) is elucidated. At a more fundamental level, it is seen that, as an application of basic quantum mechanics principles, a sharp difference exists between the intrinsic randomness unavoidably present in any quantum system, and the extrinsic randomness arising from the environmental coupling, i.e., the randomness induced by an external source of disturbance.
A one-dimensional quantum oscillator is monitored by taking repeated position measurements. As a first contribution, it is shown that, under a quantum nondemolition measurement scheme applied to a system initially at the ground state, (i) the observed sequence of measurements (quantum tracks) corresponding to a single experiment converges to a limit point, and that (ii) the limit point is random over the ensemble of the experiments, being distributed as a zero-mean Gaussian random variable with a variance at most equal to the ground-state variance. As a second contribution, the richer scenario where the oscillator is coupled with a frozen (i.e., at the ground state) ensemble of independent quantum oscillators is considered. A sharply different behavior emerges: under the same measurement scheme, here we observe that the measurement sequences are essentially divergent. Such a rigorous statistical analysis of the sequential measurement process might be useful for characterizing the main quantities that are currently used for inference, manipulation, and monitoring of many quantum systems. Several interesting properties of the quantum tracks evolution, as well as of the associated (quantum) threshold crossing times, are discussed and the dependence upon the main system parameters (e.g., the choice of the measurement sampling time, the degree of interaction with the environment, the measurement device accuracy) is elucidated. At a more fundamental level, it is seen that, as an application of basic quantum mechanics principles, a sharp difference exists between the intrinsic randomness unavoidably present in any quantum system, and the extrinsic randomness arising from the environmental coupling, i.e., the randomness induced by an external source of disturbance.
The quantum mechanical description of both a finite and infinite number of measurement repetitions, as interactions between copies of an object system and a record system, are considered here. States describing the asymptotic situation of an infinite number of repetitions are seen to have some interesting properties. The main construction of the paper is the association of states to sequential tests for randomness. To each such test T and each positive integer m one can associate states ΘnTm and Θ∞Tm corresponding respectively to those length-n and finite outcome sequences which pass test T at the significance level 2−m. Following the methods of Martin Löf, a universal sequential test V, which includes an infinity of sequential statistical tests for randomness, is given and the corresponding states ΘnVm and Θ∞Vm are discussed. Finally, a possible use of these states in the Everett interpretation of quantum mechanics is discussed.
Recently, the possibility of investigating single molecule, or single spin observables, as well as the necessity of a better understanding of the mechanisms underlying quantum dynamics in order to obtain nanoscale devices and nanostructered materials suitable for quantum computing tasks, have revived the interest in foundational aspects of quantum statistical mechanics. This thesis aims to give a contribution to this field by re-considering the statistical characterization of a quantum system at the light of some paradigmatic changes in our understanding of quantum theory which have taken place in the last two decades. In particular the impressive development of quantum information theory has changed the perceptions of quantum entanglement: for a long time it has been considered a somewhat paradoxical property of the matter at the atomic scale, but now it is regarded as an essential and ubiquitous phenomenon whose consequences are affecting the very macroscopic world that we experience. Still the decoherence program has brought out the importance of considering a quantum system together with its environment in order to clarify some key aspects of quantum dynamics. Thus, we start from the idea that quantum correlations are ubiquitous and somewhat uncontrollable in systems with many degrees of freedom which are typically considered in statistical mechanics. As a consequence we assume the standpoint that quantum statistical mechanics has not to be based on the underlying idea of a collection of many, independent quantum systems but rather it has to emerge at the level of a global wavefunction (pure state) which describes the system as well as its environment as a whole. In order to investigate the consequences of these assumptions we study the equilibrium distribution of an isolated quantum system. This is defined, in analogy with the ergodic foundations of classical statistical mechanics, on the basis of the time evolution of the quantum state. Then, we study the emergence of thermodynamic properties in a quantum system by studying the probability distribution of some function of interests, as the entropy and the equilibrium state of a subsystem, on Ensembles of Pure States. Such a probability distribution is derived from the geometry of the Hilbert space, and the theoretical tools suitable for its characterization are developed. On the one hand we perform a numerical sampling of the ensemble distributions by employing Monte Carlo techniques, on the other hand simpler analytical approximation of the geometrical distributions are derived by means of a maximum entropy principle. Model systems composed of an ensemble of spins are chosen to illustrate the salient features which emerge from the developed theoretical framework: the main point is that the Ensemble Distributions of “thermodynamic observables” (entropy or equilibrium state of a subsystem) are sharply peaked around a typical value. From the analysis it emerges that each of the overwhelming majority of the wavefunctions which has appreciable weight in the considered ensemble, is characterized by the same value of the “macroscopic” functions. This is a striking evidence of the “typicality” of these properties. In the essence, our impossibility to know the state of the system in detail does not matter, just for the remarkable fact that almost all quantum states behave essentially in the same way. By virtue of this typicality the study of the behaviour of the typical values of the thermodynamic function become meaningful. Notably, under certain conditions, one recovers the results of standard statistical mechanics, that is, the equilibrium average of the state of a subsystem can be cast in the Boltzmann canonical form at the temperature given by the usual thermodynamical relation . In the second part of the thesis we consider the dynamical aspects of the equilibrium state of a subsystem interacting with its environment. The fluctuations around the equilibrium average critically depends on the entanglement between the system and the environment and on the form of the interaction Hamiltonian. The connection between the dynamics of the fluctuations of an observable at the equilibrium and the relaxation toward the equilibrium from a “non typical” initial value is also investigated with the aid of simple model systems. The study presented in this thesis was partly motivated by a critical analysis of the statistical methods available for the theoretical modelling of magnetic resonance experiments. One of these, the Stochastic Liouville Equation, has been employed in a work completed during the first year of my Ph.D. program in order to interpret some feature of a two dimensional electron spin resonance experiment, [Fresch B., Frezzato D., Moro G. J., Kothe G., Freed J. H.; J. Phys. Chem. B., 110, 24238, (2006)].
The rather new field of quantum thermodynamics intends to derive thermodynamics from quantum mechanics, as well as to study thermodynamical behavior of quantum systems. It turns out that, indeed, thermalization can be obtained even for very small quantum systems due to the interaction with an appropriate environment. The consideration of an ensemble, as in statistical mechanics, is not necessary. However, the total system - consisting of system and environment - in quantum thermodynamics is usually considered to be closed. In particular, there exists no interaction with an external observer. Since quantum measurements typically influence the measured system, one may wonder which influence such an observation will have in the quantum thermodynamical setting. In this thesis, we study this influence of measurements in quantum thermodynamical systems. It turns out that various concepts known from statistical mechanics arise from such a "quantum thermodynamics under observation", although they do not have any meaning in the isolated quantum thermodynamical setting. The model discussed in the first part consists of a two-level system coupled to a large spin environment, the magnetization of which is measured periodically. This leads to quasi-classical trajectories for the system and - as in statistical mechanics - thermalization and temperature only have a meaning in terms of an ensemble average or a long-time average. Calculating these averages, we prove the ergodicity of the system. Interestingly, the entropy of the obtained attractor state depends on the time between the measurements and can be shown to be connected with the subjective lack of knowledge of the observer. In case of optimal measurements, the ensemble averaged state of the system under periodic measurements equals the state of the system in the quantum thermodynamical model without measurements. Introducing a detuning between system and environment, we find that the system can be prepared in almost arbitrary thermal states due to the periodic measurements. Even the creation of inversion becomes possible. As shown in numerical simulations, our results, which were analytically obtained for large environments, are even applicable to describe the behavior of the system coupled to small environments consisting of only a few spins. Besides measurements of the environment, we also study direct projective measurements of the system, as well as measurements with finite duration, obtaining that the dynamics of the system is almost independent of the concrete realization of the measurements. In the second part of the thesis, we discuss the meaning of temperature fluctuations in quantum thermodynamical systems. In statistical mechanics, there exist different approaches to the problem of temperature fluctuations, which lead to the well-known temperature fluctuation formula. The nature and operational accessibility of these fluctuations, however, remains rather unclear. We argue that according to quantum thermodynamics a system relaxes into a quasi-stationary thermal state and therefore the temperature does not fluctuate. However, since temperature is not an observable, it can only be determined indirectly. For modular systems, we show that the fluctuations of the temperature estimate obtained from a single energy measurement, indeed, are given by the temperature fluctuation formula derived in statistical mechanics, but only within a certain temperature range. The validity range of this formula increases with increasing size of the system. Thus, one can conclude that these "temperature fluctuations" can be interpreted as representing a fundamental limit for the instantaneous determination of temperature.
This PhD thesis contains results about two different main topics. The first part deals with the application of continuously monitored quantum systems to high precision quantum metrology. A continuous in time measurement on a quantum system is a kind indirect measurement, which only weakly perturbs the system and leaves room for it to evolve under its dynamics. This time-continuous measurement allows one to collect information about some interesting parameter characterizing the dynamics. In this thesis we show how to apply the theory of quantum parameter estimation to continuously monitored quantum systems. In particular, we study the estimation of a magnetic field applied to an ensemble of two level atoms; we show that by continuously monitoring the system we can obtain a quadratic scaling of the precision with the number of atoms, in two different physical settings (dynamically generated entanglement or initial entanglement). In the second part we study different aspects of nonclassicality of continuous variable quantum systems (bosonic degree of freedoms). They can be described by distributions (in particular, the Wigner function) on a classical phase space, which however can take negative values, the hallmark of nonclassicality. In this context, states with a Gaussian distribution are very useful and very well studied; however, on a fundamental level they must be considered classical. We present several studies connected to the vast topic of non-Gaussian states, starting from an application to parameter estimation, as a link to the first part. We study the relationships between anharmonic Hamiltonians and the nonclassicality of their ground states; we also explore the connection between a quantum effect called `backflow of probability' and the negativity of the Wigner function. We end by showing that quantum operations made out of Gaussian building blocks give rise to a well-defined resource theory of Wigner negativity and non-Gaussianity.
We analyze the problem of estimating past quantum states of a monitored system from a mathematical perspective in order to ensure self-consistency with the principle of quantum nondemolition. Despite several claims of “measuring noncommuting observables” in the physics literature, we show that we are always measuring commuting processes. Our main interest is in the notion of quantum smoothing, or retrodiction. In particular, we examine proposals to estimate the result of an external measurement made on an open quantum systems during a period where it is also undergoing continuous monitoring. A full analysis shows that the nondemolition principle is in place, and so a well-posed statistical inference problem can be formulated. We extend the formalism to consider multiple independent external measurements made on the system over the course of a continual period of monitoring.
Abstract In the standard Bell scenario, when making a local projective measurement on each system component, the amount of randomness generated is restricted. However, this limitation can be surpassed through the implementation of sequential measurements. Nonetheless, a rigorous definition of random numbers in the context of sequential measurements is yet to be established, except for the lower quantification in device-independent scenarios. In this paper, we define quantum intrinsic randomness in sequential measurements and quantify the randomness in the Collins–Gisin–Linden–Massar–Popescu inequality sequential scenario. Initially, we investigate the quantum intrinsic randomness of the mixed states under sequential projective measurements and the intrinsic randomness of the sequential positive-operator-valued measure (POVM) under pure states. Naturally, we rigorously define quantum intrinsic randomness under sequential POVM for arbitrary quantum states. Furthermore, we apply our method to one-Alice and two-Bobs sequential measurement scenarios, and quantify the quantum intrinsic randomness of the maximally entangled state and maximally violated state by giving an extremal decomposition. Finally, using the sequential Navascues–Pironio–Acin hierarchy in the device-independent scenario, we derive lower bounds on the quantum intrinsic randomness of the maximally entangled state and maximally violated state.