High-quality rare-earth-ion (REI) doped materials are a prerequisite for many applications such as quantum memories, ultra-high-resolution optical spectrum analyzers and information processing. Compared to bulk materials, REI doped powders offer low-cost fabrication and a greater range of accessible material systems. Here we show that crystal properties, such as nuclear spin lifetime, are strongly affected by mechanical treatment, and that spectral hole burning can serve as a sensitive method to characterize the quality of REI doped powders. We focus on the specific case of thulium doped Y3Al5O12 (Tm:YAG). Different methods for obtaining the powders are compared and the influence of annealing on the spectroscopic quality of powders is investigated on a few examples. We conclude that annealing can reverse some detrimental effects of powder fabrication and, in certain cases, the properties of the bulk material can be reached. Our results may be applicable to other impurities and other crystals, including color centers in nano-structured diamond.
High-quality rare-earth-ion (REI) doped materials are a prerequisite for many applications such as quantum memories, ultra-high-resolution optical spectrum analyzers and information processing. Compared to bulk materials, REI doped powders offer low-cost fabrication and a greater range of accessible material systems. Here we show that crystal properties, such as nuclear spin lifetime, are strongly affected by mechanical treatment, and that spectral hole burning can serve as a sensitive method to characterize the quality of REI doped powders. We focus on the specific case of thulium doped Y3Al5O12 (Tm:YAG). Different methods for obtaining the powders are compared and the influence of annealing on the spectroscopic quality of powders is investigated on a few examples. We conclude that annealing can reverse some detrimental effects of powder fabrication and, in certain cases, the properties of the bulk material can be reached. Our results may be applicable to other impurities and other crystals, including color centers in nano-structured diamond.
The creation of well-understood structures using spectral hole burning is an important task in the use of technologies based on rare-earth ion-doped crystals. We apply a series of different techniques to model and improve the frequency dependent population change in the atomic level structure of thulium yttrium gallium garnet (Tm:YGG). In particular we demonstrate that, at zero applied magnetic field, numerical solutions to frequency-dependent three-level rate equations show good agreement with spectral hole-burning results. This allows us to predict spectral structures given a specific hole-burning sequence, the underpinning spectroscopic material properties, and the relevant laser parameters. This enables us to largely eliminate power-dependent hole broadening through the use of adiabatic hole-burning pulses. Although this system of rate equations shows good agreement at zero field, the addition of a magnetic field results in unexpected spectral diffusion proportional to the induced Tm ion magnetic-dipole moment and average magnetic-field strength, which, through the quadratic Zeeman effect, dominates the optical spectrum over long timescales. Our results allow optimization of the preparation process for spectral structures in a large variety of rare-earth ion-doped materials for quantum memories and other applications.
Unique spectroscopic properties of isolated rare earth ions in solids offer optical linewidths rivaling those of trapped single atoms and enable a variety of recent applications. We design rare-earth-doped crystals, ceramics, and fibers with persistent or transient "spectral hole" recording properties for applications including high-bandwidth optical signal processing where light and our solids replace the high-bandwidth portion of the electronics; quantum cryptography and information science including the goal of storage and recall of single photons; and medical imaging technology for the 700-900 nm therapeutic window. Ease of optically manipulating rare-earth ions in solids enables capturing complex spectral information in 105 to 108 frequency bins. Combining spatial holography and spectral hole burning provides a capability for processing high-bandwidth RF and optical signals with sub-MHz spectral resolution and bandwidths of tens to hundreds of GHz for applications including range-Doppler radar and high bandwidth RF spectral analysis. Simply stated, one can think of these crystals as holographic recording media capable of distinguishing up to 108 different colors. Ultra-narrow spectral holes also serve as a vibration-insensitive sub-kHz frequency reference for laser frequency stabilization to a part in 1013 over tens of milliseconds. The unusual properties and applications of spectral hole burning of rare earth ions in optical materials are reviewed. Experimental results on the promising Tm3+:LiNbO3 material system are presented and discussed for medical imaging applications. Finally, a new application of these materials as dynamic optical filters for laser noise suppression is discussed along with experimental demonstrations and theoretical modeling of the process.
Persistent spectral hole-burning is extensively studied in many materials. In inorganic materials doped with rare earth ions, we have mainly two mechanisms for hole-burning; one is optical pumping to hyperfine sublevels in rare earth ions, and the other is optically induced rearrangement of local structure around optical centers. In crystals we often observe the hole due to the former mechanism while the hole due to the latter is reported mainly in glasses. Up to now, there seems to be only little study about the correlation between the mechanism of hole-burning and sample-quality or defects. Recently we reported that the character of holes in Y2O3:Pr3+ depends on the quality of samples [1]. In this paper we study the origin of these holes in Y2O3 with a well-controlled manner. For this purpose, we applied hole-burning spectroscopy to various Y2O3:Pr3+(0.2mol%) samples doped with other metallic ions.
In this thesis we explore various ways to extend population lifetimes and coherence times of solid-state emitters. We focus on rare-earth-ion doped host materials and silicon vacancy centers in diamond, both of which are used for applications in quantum information processing and quantum communications. Enhanced lifetimes and coherence times would improve the performance of these applications. One approach investigates the possibility to suppress lattice vibrations that cause decoherence and population relaxation by engineering the phonon density of states through nano-structuring of the emitter's host material. Towards this end we study different materials and methods to obtain the desired nano-materials. Using various optical spectroscopic methods, we show that population dynamics can indeed be influenced by modifying the structure of the surrounding host material. However, we also find that the employed fabrication and synthesis methods often induce crystal damage that, in turn, degrades spectroscopic properties. As a second approach, we study rare-earth-ions in disordered host materials. Detailed spectroscopic characterizations are presented and we show with the example of an erbium doped fiber that such materials can indeed feature better properties, specifically longer population lifetimes, than the commonly used bulk crystals. We found optimal operation parameters for the erbium doped fiber which made it possible to use this medium for successful proof of principle experiments demonstrating a multimode quantum memory that operates within the convenient telecom band (around 1550 nm wavelength). Besides increasing the fundamental knowledge, the results of the studies presented in this thesis are highly relevant for the fields of quantum communications and quantum information processing since nano-structured materials are beginning to be investigated for on-chip implementations of various applications such as quantum memories and quantum gates. In addition, we found that population dynamics driven by detrimental lattice vibrations can indeed be modified in small powder materials and thus, with improved fabrication techniques, the complete suppression of lattice vibrations should be possible, benefiting a plethora of applications.
Material strain has recently received growing attention as a complementary resource to control the energy levels of quantum emitters embedded inside a solid-state environment.Some rare-earth ion dopants provide an optical transition which simultaneously has a narrow linewidth and is highly sensitive to strain.In such systems, the technique of spectral hole burning, in which a transparent window is burned within the large inhomogeneous profile, allows one to benefit from the narrow features, which are also sensitive to strain, while working with large ensembles of ions.However, working with ensembles may give rise to inhomogeneous responses among different ions.We investigate experimentally how the shape of a narrow spectral hole is modified due to external mechanical strain, in particular, the hole broadening as a function of the geometry of the crystal sites and the crystalline axis along which the stress is applied.Studying these effects is essential in order to optimize the existing applications of rare-earth-doped crystals in fields which already profit from the more-well-established coherence properties of these dopants, such as frequency metrology and quantum information processing, or even suggest alternative applications of these materials, for example, as robust devices for force-sensing or highly sensitive accelerometers.
Solids containing rare earth (RE) ions have attracted spectroscopists' attention since the beginning of this century.In the last 30 years, their extremely narrow spectral features in combination with the use of non linear spectroscopy have served to sensitively measure ion-solid interactions and to progressively observe narrower homogeneous linewidths.The potential for using RE ion doped crystals as optical storage materials and processors has lately been a driving force in their investigations, Here, the ratio of inhomogeneous to homogeneous linewidth is regarded as an adequate measure of storage density and can become as big as 10 7 at cryogenic temperatures.Therefore, the analysis of line broadening is of fundamental as well as applied interest.This work is concerned with the investigation of interactions of RE ions with their environment.By means of a laser with a kilohertz resolution and non-linear spectroscopy, spectral dynamics as a function of intrinsic, external electric field, or light-pulse induced perturbations are analyzed on different time scales.In the first part, the theoretical background for the spectroscopy of RE ion doped crystals is outlined.The energy levels are presented and it is shown that due to their electronic properties RE ions have spectrally narrow electronic transitions, sometimes in the sub-kHz regime.The investigations of these narrow spectral features on the seconds to minutes time scale require very stable tunable laser sources.At present, such devices are not commercially available.In the second part, the performance of ahorne built laser system is characterized using persistent spectral holes, The results show that frequency selective materials can be used as powerful tools for the high resolution Vlll Abstract spectral analysis of laser sources.Complementary to that, they give a measure for the long term evolution of the spectral holes for the particular hole burning substance.In the third part, the effect of an external electric field on RE ion doped crystals is investigated.It is shown that for these systems the electric field induced frequency shifts are fully reversible.A general theory of Stark splittings of RE doped crystals is introduced and two methods are presented which allow for the determination of the magnitude and orientation of the electric dipole moment differences with sub-degree accuracy.Finally in the last part, spectral line broadening mechanisms of RE ion doped crystals are discussed and investigated by means of two-pulse photon echoes.Through variation of the experimental parameters, a discrimination between the different contributions is partly achieved and characteristic properties for different dephasing mechanisms are presented.In combination with the measurements from the third part, quantitative predictions of the electric dipole-dipole induced broadening are carried out, which are compared to the experimental results,