Efficient operation sequences to couple and interchange quantum information between quantum dot spin qubits of different kinds are derived using exchange interactions. In the qubit encoding of a single-spin qubit, a singlet-triplet qubit, and an exchange-only (triple-dot) qubit, some of the single-qubit interactions remain on during the entangling operation; this greatly simplifies the operation sequences that construct entangling operations. In the ideal setup, the gate operations use the intraqubit exchange interactions only once, and entangling operations with gate times similar to typical single-qubit operations are constructed. The limitations of the entangling sequences are discussed, and it is shown how quantum information can be converted between different kinds of quantum dot spin qubits. These gate sequences are useful for large-scale quantum computation because they show that different kinds of coded spin qubits can be combined easily, permitting the favorable physical properties of each to be employed.
Efficient operation sequences to couple and interchange quantum information between quantum dot spin qubits of different kinds are derived using exchange interactions. In the qubit encoding of a single-spin qubit, a singlet-triplet qubit, and an exchange-only (triple-dot) qubit, some of the single-qubit interactions remain on during the entangling operation; this greatly simplifies the operation sequences that construct entangling operations. In the ideal setup, the gate operations use the intraqubit exchange interactions only once, and entangling operations with gate times similar to typical single-qubit operations are constructed. The limitations of the entangling sequences are discussed, and it is shown how quantum information can be converted between different kinds of quantum dot spin qubits. These gate sequences are useful for large-scale quantum computation because they show that different kinds of coded spin qubits can be combined easily, permitting the favorable physical properties of each to be employed.
A two-level quantum system is the building block of a quantum computer. This pair of quantum states defines the computational unit of a quantum computer, and it is called a quantum bit or qubit in analogy to the bit that is the binary unit of a classical computer. The spin of a single electron naturally defines such a two-level quantum system. A quantum dot can be tuned to the single-electron regime, and an array of singly occupied quantum dots provides a multi-qubit register. This thesis describes the multielectron encoding of a spin qubit using a pair or a trio of quantum dots, and it analyzes the coherence properties and manipulation protocols of this system. The singlet-triplet qubit, coded using the singlet state and the spinless triplet state of a pair of singly occupied quantum dots, can be controlled all electrically when applying voltages to gates close to the quantum dot structure. Rapid, subnanosecond modifications of the double quantum dot's charge configuration have been realized successfully. A small magnetic field gradient across the double quantum dot enables universal qubit control. Two modifications of the normal singlet-triplet encoding are introduced. (1) The six-electron configuration of a double quantum dot encodes a singlet-triplet qubit in the same way as for the two-electron double quantum dot. Two electrons at each quantum dot are irrelevant for the qubit manipulations because they are paired in a singlet state; the remaining two electrons encode the qubit. The qubit's wave function is immune to charge noise at moderate out-of-plane magnetic fields. (2) A singlet-triplet qubit encoded using two quantum dots of different sizes has an orbital state degeneracy of the singlet state and the spinless triplet state at finite out-of-plane magnetic fields. Spin-orbit interactions lift this state degeneracy, while the magnitude of the state coupling is determined by the size difference of the QDs. This setup enables the manipulations of singlet-triplet qubits without the need for magnetic field gradients. Finally, two-qubit gates between singlet-triplet qubits are proposed that use mediated exchange interactions via one quantum state. These operations are well controlled and highly noise insensitive. Orbital interactions alone can control spin qubits coded in a three electron Hilbert space. For example, the exchange-only qubit is encoded using three singly occupied quantum dots. The exchange interactions of two quantum dot pairs need to be modified to manipulate this qubit. The noise sensitivity of the exchange-only qubit is discussed. Alternatively, a three-electron qubit at a double quantum dot can be operated when single electrons are transferred between the quantum dots. Fast, subnanosecond manipulations of the double quantum dot's charge configuration are required to realize single-qubit gates. A novel two-qubit pulse gate for the three-electron double quantum dot qubit is proposed.
We describe high-fidelity entangling gates between singlet-triplet qubits (STQs) which are coupled via one quantum state (QS). The QS can be provided by a quantum dot itself or by another confined system. The orbital energies of the QS are tunable using an electric gate close to the QS, which changes the interactions between the STQs independent of their single-qubit parameters. Short gating sequences exist for controlled not (cnot) operations. We show that realistic quantum dot setups permit excellent entangling operations with gate infidelities below ${10}^{\ensuremath{-}3}$, which is lower than the quantum error correction threshold of the surface code. We consider limitations from fabrication errors, hyperfine interactions, spin-orbit interactions, and charge noise in GaAs and Si heterostructures.
We study controllable exchange coupling between two singlet-triplet qubits. We start from the original second quantized Hamiltonian of a quadruple quantum dot system and obtain the effective spin-spin interaction between the two qubits using the projection operator method. Under a strong uniform external magnetic field and an inhomogeneous local micromagnetic field, the effective interqubit coupling is of the Ising type, and the coupling strength can be expressed in terms of quantum dot parameters. Finally, we discuss how to generate various two-qubit operations using this controllable coupling, such as entanglement generation, and a controlled-not gate.
The benefit of exchange-only qubits compared to other spin-qubit types is the universal control using only voltage-controlled exchange interactions between neighboring spins. As a compromise, qubit operations have to be constructed from nonorthogonal rotation axes of the Bloch sphere and result in rather long pulsing sequences. This paper aims to develop a faster implementation of single-qubit gates using simultaneous exchange pulses and manifests their potential for the construction of two-qubit gates. We introduce pulse sequences in which single-qubit gates could be executed faster and show that subsequences on three spins in two-qubit gates could be implemented in fewer steps. Our findings can particularly speed up gate sequences for realistic idle times between sequential pulses and we show that this advantage increases with more interconnectivity of the quantum dots. We further demonstrate how a phase operation can introduce a relative phase between the computational and some of the leakage states, which can be advantageous for the construction of two-qubit gates. In addition to our theoretical analysis, we experimentally demonstrate and characterize a simultaneous exchange implementation of X rotations in a Si Ge quantum dot device and compare to the state of the art with sequential exchange pulses.
A constructive scheme has been devised to enable mapping of any quantum computation into a spintronic circuit in which the computation is encoded in a basis that is, in principle, immune to quantum decoherence. The scheme is implemented by an algorithm that utilizes multiple physical spins to encode each logical bit in such a way that collective errors affecting all the physical spins do not disturb the logical bit. The scheme is expected to be of use to experimenters working on spintronic implementations of quantum logic. Spintronic computing devices use quantum-mechanical spins (typically, electron spins) to encode logical bits. Bits thus encoded (denoted qubits) are potentially susceptible to errors caused by noise and decoherence. The traditional model of quantum computation is based partly on the assumption that each qubit is implemented by use of a single two-state quantum system, such as an electron or other spin-1.2 particle. It can be surprisingly difficult to achieve certain gate operations . most notably, those of arbitrary 1-qubit gates . in spintronic hardware according to this model. However, ironically, certain 2-qubit interactions (in particular, spin-spin exchange interactions) can be achieved relatively easily in spintronic hardware. Therefore, it would be fortunate if it were possible to implement any 1-qubit gate by use of a spin-spin exchange interaction. While such a direct representation is not possible, it is possible to achieve an arbitrary 1-qubit gate indirectly by means of a sequence of four spin-spin exchange interactions, which could be implemented by use of four exchange gates. Accordingly, the present scheme provides for mapping any 1-qubit gate in the logical basis into an equivalent sequence of at most four spin-spin exchange interactions in the physical (encoded) basis. The complexity of the mathematical derivation of the scheme from basic quantum principles precludes a description within this article; it must suffice to report that the derivation provides explicit constructions for finding the exchange couplings in the physical basis needed to implement any arbitrary 1-qubit gate. These constructions lead to spintronic encodings of quantum logic that are more efficient than those of a previously published scheme that utilizes a universal but fixed set of gates.
This thesis discusses various schemes and protocols for quantum information processing in mesoscopic systems with particular focus on using the spin of a particle as the bearer of information. The first chapter introduce various aspects of the field of quantum information used in this thesis such as qubits, entanglement, its quantification, quantum logic gates and entanglement swapping. In this chapter concepts such as AKLT states, decoherence and adiabatic elimination are introduced as they will be relevant in the thesis. In chapter 2 we introduce the Quantum Dots as the solid state system that will primarily be used as the hardware for the development of Quantum Information Processing (QIP). The different properties of quantum dots depending on their size are discussed. The exchange interaction between tunnel coupled quantum dots and the background of quantum computation in quantum dots is described. The principal sources of decoherence and the measurement techniques for spin qubits are presented. In chapter 3, carbon nanowires filled with N@C60 dimers are studied to analyse the entanglement between nuclear spins. The dimer is modelled as a two coupled nuclear spin- electron spin pair with a Heisenberg interaction. The entanglement have been studied depending on the temperature and the intensity of an external magnetic field. Witnessing the entanglement, and particularly bound entanglement are discussed. In chapter 4, the way to extract a singlet from a quantum dot is explored. The system that we model will be consisting of a triple dot and analyse the best way to get the singlet out, with each electron in a separate dot. The chief motivation is to create a singlet between separate dots in a time-scale much faster than that given by spinspin exchange interactions. In chapter 5, quantum logic gates in a triple dot system has been studied. Such gates have been widely studied in double and single quantum dots. Motivated by the advent of experimental set ups of triple dots, we have studied the natural quantum gates that came out of a triple dot system. There are still two spin quantum bits in the three dots and there is an empty intervening dot, which imparts the scheme some advantages, as well as a substantial difference from the class of schemes studied so far. In chapter 6, we model a large square dot. As we describe in chapter 2, the properties of the large dots make them behave with some interesting properties such as hosting Wigner molecules of electrons inside. We explore the application of these structures for quantum information processing. We show here how to get singlet/triplet measurement, entanglement swapping, and how to prepare a 1D AKLT state, using the square dot as a construction block of the system. Finally in chapter 7 conclusions and further work. Here we indicate the further work that could be done with the knowledge present in this thesis and motivated by future advances in the technology.