We propose a scheme for performing an entanglement-swapping operation within a quantum communications hub (a Bell like measurement) using an NV-centre's optical transition. This is based on the heralded absorption of a photon resonant with that transition. The quantum efficiency of a single photon absorption is low but can be improved by placing the NV centre inside a micro cavity to boost the interaction time and further by recycling the leaked photon back into the cavity after flipping its phase and/or polarization. Throughout this process, the NV is repeatedly monitored via a QND measurement that heralds whether or not the photon absorption has succeeded. Upon success we know a destructive Bell measurement has occurred between that photon and NV centre. Given low losses and high per-pass absorption probability, this scheme should allow the total success probability to approach unity. With long electron spin coherence times possible at low temperatures, this component could be useful within a memory-based quantum repeater or relay.
We propose a scheme for performing an entanglement-swapping operation within a quantum communications hub (a Bell like measurement) using an NV-centre's optical transition. This is based on the heralded absorption of a photon resonant with that transition. The quantum efficiency of a single photon absorption is low but can be improved by placing the NV centre inside a micro cavity to boost the interaction time and further by recycling the leaked photon back into the cavity after flipping its phase and/or polarization. Throughout this process, the NV is repeatedly monitored via a QND measurement that heralds whether or not the photon absorption has succeeded. Upon success we know a destructive Bell measurement has occurred between that photon and NV centre. Given low losses and high per-pass absorption probability, this scheme should allow the total success probability to approach unity. With long electron spin coherence times possible at low temperatures, this component could be useful within a memory-based quantum repeater or relay.
Quantum repeaters are essential for overcoming the exponential photon loss that limits entanglement generation over long distances in quantum networks. An absorption-emission-based quantum repeater exploits the fundamental light-matter interactions of a diamond nitrogen-vacancy (NV) center---photon absorption and photon emission---to transfer a quantum state from an absorbed photon to an emitted photon, offering a scalable architecture that operates without photon interference between remote nodes. Here we demonstrate an absorption-emission-based quantum repeater node using a single NV center, realizing the complete single-node operation in which heralded photon-to-memory quantum state transfer, repeat-until-success (RUS) emission of a spin-entangled photon, and quantum teleportation of the memory state onto the emitted photon constitute the essential repeater operation. By characterizing the complete repeater operation as a quantum channel from the absorbed photon to the emitted photon via quantum process tomography, we obtain a process fidelity of 78%. This demonstration establishes the absorption-emission approach as a fundamental building block for scalable quantum repeater architectures and paves the way toward practical long-distance quantum networks.
As a kind of hybrid spin system, nitrogen-vacancy (NV) centers in diamond have shown great advantages in implementing quantum registers for quantum information processing (QIP). When scaling up quantum registers to quantum networks for long-distance quantum communication and distributed quantum computation, determining how to entangle two registers in distant nodes is a basic challenge in the absence of direct interactions. In this paper, we present a scheme for entangling two distant NV centers based on the special optical absorption and emission of NV centers. In this demonstration, we transfer the entanglement information of a pair of photons to nuclear spins in NV centers and create remote NV–NV entanglement mediated by entangled photons. We then explain how to extract the entangled information from NV centers to prepare on-demand entangled photons for optical quantum information processing. The strategy of entanglement transfer between spins and photons demonstrated herein may pave the way for an NV-center-based quantum network.
Absorption and emission, fundamental interactions between light and matter, enable the regeneration of a quantum state of light via matter through concatenated quantum state transfer based on the principle of quantum teleportation. This transfer is enabled by electron spin-orbit entanglement and electron-nuclear spin entanglement inherent within the material. Here, we demonstrate that a photon quantum state imprinted in polarization is transferred to another photon emitted from a nitrogen vacancy (NV) center. This transfer is heralded by the result of the Bell state measurement between the electron and nitrogen nuclear spins. We show that the minimum number of incident photons needed to achieve transfer is, on average, only 0.1 photons, enabling quantum teleportation over 10 km. This demonstration paves the way for a quantum repeater that is robust against phase and intensity errors, unlike the conventional photon interference scheme, thereby facilitating practical quantum networks.
We present new quantum repeater architectures based on optical modules with NV diamond centers to highlight how physical properties of these optical modules change the operations, performance and limitations of the quantum repeater systems.We focus on two different approaches to construct optical modules, and see how the properties of modules propagate to the total system. The first approach to construct the optical module is to utilize the conditional refection dependent on the electron state of the single NV center in the cavity, and the other approach is to use absorption induced teleportation from an incoming photon to the nuclear spin of the NV center. To characterize a quantum repeater system, the processes and protocols associated with photons are important.As photons are not reliable as an information carrier, i.e. quantum manipulations associated with photons are not deterministic, and the protocols and manipulations rely on post-selection to keep the fidelity of the quantum information.Post-selection is essential in quantum communications based on photons to maintain the fidelity of the communication, however it restricts the architecture of the system to be tolerant to probabilistic gates. This factor is cost intensive and is the key for the architectures to be scalable.We show that the details of how the scalability of the architectures can be affected by physical parameters of the modules.
Quantum repeater is one of the important building blocks for long distance quantum communication network. The previous quantum repeaters based on atomic ensembles and linear optical elements can only be performed with a maximal success probability of 1/2 during the entanglement creation and entanglement swapping procedures. Meanwhile, the polarization noise during the entanglement distribution process is harmful to the entangled channel created. Here we introduce a general interface between a polarized photon and an atomic ensemble trapped in a single-sided optical cavity, and with which we propose a high-efficiency quantum repeater protocol in which the robust entanglement distribution is accomplished by the stable spatial-temporal entanglement and it can in principle create the deterministic entanglement between neighboring atomic ensembles in a heralded way as a result of cavity quantum electrodynamics. Meanwhile, the simplified parity-check gate makes the entanglement swapping be completed with unity efficiency, other than 1/2 with linear optics. We detail the performance of our protocol with current experimental parameters and show its robustness to the imperfections, i.e., detuning and coupling variation, involved in the reflection process. These good features make it a useful building block in long distance quantum communication.
Quantum communication attempts to harness the unique rules of quantum mechanics to perform communication tasks that are difficult or impossible using classical rules. To realize these benefits, information must be carried on quantum systems. Photons make excellent carriers because they interact very little with the environment, move quickly, and can naturally store quantum information in their polarization. However, it is notoriously difficult to detect a single photon without destroying it. Standard detectors simply absorb the photon, losing the quantum information. This is a critical outstanding problem in quantum communication, as advanced protocols need to know exactly when a photon has arrived at a receiver after transmission through the atmosphere or an optical fibre before performing further quantum-information-processing tasks. Certifying a photon’s presence is of particular interest in tests of Bell’s inequalities, which have only recently been performed without loopholes arising from photon loss, and in device-independent quantum cryptography, which relies on such Bell tests for security. \n \nIn this thesis, I first present work on directly reducing losses in a successful loophole-free Bell test. This is an extremely difficult task that cannot be extended for long-distance communication. Therefore I then focus on ways to circumvent loss by detecting photons without destroying them while preserving their quantum information. First I analyze theoretically a way to herald photons using only linear-optical elements (beam splitters and phase shifters) and extra ancilla photons. Similar but older methods have been demonstrated experimentally by other groups, and my improvements will help future advanced quantum communication protocols. \n \nThe main experiment in this thesis certifies the presence of a photon in a rather simple way: split the photon into two using a nonlinear optical crystal, then detect one of the pair to herald the other. I show in this first proof-of-principle experiment that photonic qubit precertification indeed preserves qubit states, with up to (92.3 ± 0.6)% fidelity and rates of 1100 events per hour. With reductions in detector dark counts, precertification could outperform direct transmission, even with extremely lossy fibre links. \n \nFinally, I present two sources of photons based on nonlinearities in optical fibres. One of the limitations of the photon splitting scheme for heralding is the low success probability due to the very low likelihood of splitting a photon in two. In these fibre photon sources I investigate increasing the splitting likelihood in four-wave mixing through advanced materials and fibre designs. I use polarization-maintaining fibres to generate entangled photon pairs as a prerequisite to precertification, with (92.2 ± 0.2)% fidelity to a maximally-entangled state. Then I show that one type of highly nonlinear chalcogenide glass, never before used for photon pair generation, could outperform standard nonlinear crystals by two orders of magnitude, with calculated conversion efficiency up to 10^-3. To approach the single photon regime, I generate photon pairs in chalcogenide microwires with pump powers as low as 480 nW and verify their timing correlations. \n \nThese advances demonstrate the capability of nondestructive precertification of photons to allow advanced quantum communications protocols even over long distance, and could lead to the first implementations of fully device-independent quantum cryptography.