Important tasks in cavity quantum electrodynamics include the generation and control of quantum states of spatially separated particles distributed in different cavities. An interesting question in this context is how to prepare entanglement among particles located in different cavities, which are important for large-scale quantum information processing. We here consider a multi-cavity system where cavities are coupled to a superconducting (SC) qubit and each cavity hosts many SC qubits. We show that all intra-cavity SC qubits plus the coupler SC qubit can be prepared in an entangled Greenberger–Horne–Zeilinger (GHZ) state, by using a single operation and without the need of measurements. The GHZ state is created without exciting the cavity modes; thus greatly suppressing the decoherence caused by the cavity-photon decay and the effect of unwanted inter-cavity crosstalk on the operation. We also introduce two simple methods for entangling the intra-cavity SC qubits in a GHZ state. As an example, our numerical simulations show that it is feasible, with current circuit-QED technology, to prepare high-fidelity GHZ states, for up to nine SC qubits by using SC qubits distributed in two cavities. This proposal can in principle be used to implement a GHZ state for an arbitrary number of SC qubits distributed in multiple cavities. The proposal is quite general and can be applied to a wide range of physical systems, with the intra-cavity qubits being either atoms, NV centers, quantum dots, or various SC qubits.
Important tasks in cavity quantum electrodynamics include the generation and control of quantum states of spatially separated particles distributed in different cavities. An interesting question in this context is how to prepare entanglement among particles located in different cavities, which are important for large-scale quantum information processing. We here consider a multi-cavity system where cavities are coupled to a superconducting (SC) qubit and each cavity hosts many SC qubits. We show that all intra-cavity SC qubits plus the coupler SC qubit can be prepared in an entangled Greenberger–Horne–Zeilinger (GHZ) state, by using a single operation and without the need of measurements. The GHZ state is created without exciting the cavity modes; thus greatly suppressing the decoherence caused by the cavity-photon decay and the effect of unwanted inter-cavity crosstalk on the operation. We also introduce two simple methods for entangling the intra-cavity SC qubits in a GHZ state. As an example, our numerical simulations show that it is feasible, with current circuit-QED technology, to prepare high-fidelity GHZ states, for up to nine SC qubits by using SC qubits distributed in two cavities. This proposal can in principle be used to implement a GHZ state for an arbitrary number of SC qubits distributed in multiple cavities. The proposal is quite general and can be applied to a wide range of physical systems, with the intra-cavity qubits being either atoms, NV centers, quantum dots, or various SC qubits.
Hybrid entangled states are essential quantum resources not only for hybrid quantum communication but also for creating robust hybrid quantum networks and processors.By considering a circuit-cavity quantum electrodynamics (QED) system composed of a superconducting (SC) qutrit (a three-level quantum system) and n microwave cavities, we here present a method to prepare hybrid Greenberger-Horne-Zeilinger (GHZ) entangled states of n+1 qubits.The use of a single SC qutrit as the coupler leads to a significant saving in circuit hardware resources.The GHZ state preparation is deterministic without measurement.The operation time for the GHZ state preparation is independent of the number of qubits.Decoherence from the highest energy level of the SC qutrit is suppressed because this level remains unoccupied during the GHZ state preparation.Our numerical simulations demonstrate that the high-fidelity generation of hybrid GHZ states of an SC qubit and three photonic qubits is achievable within current circuit-QED technology.The proposed scheme possesses universality and is suitable for preparing hybrid GHZ states of a matter qubit (e.g., atomic qubit, trapped ion, quantum dot, magnon, NV center, and SC qubit with various types) and multiple photonic qubits across a wide range of physical systems.
The generation and control of quantum states of spatially-separated qubits distributed in different cavities constitute fundamental tasks in cavity quantum electrodynamics (QED). An interesting question in this context is how to prepare entanglement and realize quantum information transfer between qubits located at different cavities, which are important in large-scale quantum information processing. In this paper, we consider a physical system consisting of two cavities and three qubits. Two of the qubits are placed in two different cavities while the remaining one acts as a coupler, which is used to connect the two cavities. We propose an approach for generating quantum entanglement and implementing quantum information transfer between the two spatially-separated inter-cavity qubits. The quantum operations involved in this proposal are performed by a virtual photon process; thus the cavity decay is greatly suppressed during operations. In addition, to complete these tasks, only one coupler qubit and one operation step are needed. Moreover, there is no need to apply classical pulses, so that the engineering complexity is much reduced and the operation procedure is greatly simplified. Finally, our numerical results illustrate that high-fidelity implementation of this proposal using superconducting phase qubits and one-dimensional transmission line resonators is feasible for current circuit QED implementations. This proposal can also be applied to other types of superconducting qubits, including flux and charge qubits.
Provided that cavities are initially in a Greenberger-Horne-Zeilinger (GHZ) entangled state, we show that GHZ states of N-group qubits distributed in N cavities can be created via a three-step operation. The GHZ states of the N-group qubits are generated by using N-group qutrits placed in the N cavities. Here, ``qutrit'' refers to a three-level quantum system with the two lowest levels representing a qubit while the third level acting as an intermediate state necessary for the GHZ state creation. This proposal does not depend on the architecture of the cavity-based quantum network and the way for coupling the cavities. The operation time is independent of the number of qubits. The GHZ states are prepared deterministically because no measurement on the states of qutrits or cavities is needed. In addition, the third energy level of the qutrits during the entire operation is virtually excited and thus decoherence from higher energy levels is greatly suppressed. This proposal is quite general and can in principle be applied to create GHZ states of many qubits using different types of physical qutrits (e.g., atoms, quantum dots, NV centers, various superconducting qutrits, etc.) distributed in multiple cavities. As a specific example, we further discuss the experimental feasibility of preparing a GHZ state of four-group transmon qubits (each group consisting of three qubits) distributed in four one-dimensional transmission line resonators arranged in an array.
The generation of hybrid entangled states between matter qubits and microwave-field qubits is a fascinating area of quantum science and technology. In this work, we propose an efficient method to deterministically prepare hybrid entangled states between multiple superconducting qubits (matter qubits) and microwave-field qubits (flying qubits), by using a system composed of multiple superconducting qutrits and microwave cavities. Here, each superconducting (SC) qubit is encoded with the two lowest levels of a SC qutrit, while each microwave-field (MF) qubit is encoded using discrete-variable (DV) states (e.g., the vacuum and single-photon states) or continuous-variable (CV) states (e.g., coherent states) of a microwave cavity. Due to the nonpopulation of the qutrits' third energy level during the operation, decoherence from this level is significantly reduced. Moreover, the hybrid entangled states can be generated on a large scale. The operation time is independent of the number of SC qubits and MF qubits. Only two steps of the operation are needed for the preparation of the hybrid Greenberger---Horne---Zeilinger (GHZ) states as long as the initial states of the system are ready. As an example, our numerical results demonstrate that high-fidelity creation of hybrid DV-DV entangled states or CV-DV entangled states of three SC qubits and three MF qubits is feasible with current circuit QED technology. This method is universal and can be extended to generate hybrid entangled states between other matter qubits (such as atoms, ions, quantum dots, NV centers, and magnons) and microwave- or optical-field qubits.
Hybrid entanglement between particlelike and wavelike optical qubits has drawn increasing attention because such hybrid entanglement is a key resource in establishing hybrid quantum networks and connecting quantum processors with different encoding qubits. For convenience, we define ``particlelike optical qubits'' as PO qubits and ``wavelike optical qubits'' as WO qubits. In this work, we propose a method to create a hybrid Greenberger-Horne-Zeilinger (GHZ) entangled state of n PO qubits and n WO qubits, by using 2n microwave cavities coupled to a superconducting flux qutrit. The two logic states of a PO qubit here are represented by the vacuum state and the single-photon state of a cavity (or represented by the rotated states of the vacuum state and the single-photon state), while the two logic states of a WO qubit are indicated by the two coherent states of a cavity. The procedure for preparing the GHZ state consists of only a few basic operations, and the circuit resources are significantly reduced because of using only one flux qutrit as the coupler. The GHZ-state preparation time does not depend on the number of qubits, and the GHZ state is deterministically generated since no measurement is made. In addition, the intermediate higher-energy level of the qutrit during the entire operation is virtually excited and thus decoherence from this level is greatly suppressed. This proposal is quite general and can be extended to create the proposed hybrid GHZ state, by using a $\mathrm{\ensuremath{\Lambda}}$-type natural or artificial atom coupled to 2n microwave or optical cavities. As an example, our numerical simulation demonstrates that within current circuit-QED technology, the hybrid GHZ state of two PO qubits and two WO qubits can be prepared with a high fidelity.
Hybrid W entangled states are essential in quantum information processing, quantum communication, and quantum technology. In this Letter, we propose a simple method to prepare hybrid W entangled states between n superconducting (SC) qubits and n microwave resonators (MRs) in circuit QED. Only two basic operations are needed for the preparation of hybrid W states. The operational time decreases as the number of qubits increases. Since no ancillary cavity is required, the hardware resources for the state preparation are minimized. Because the state preparation does not involve any measurements, the hybrid W entangled states are generated in a deterministic way. Moreover, during the entire preparation, the high-energy levels of the SC qutrits remain unexcited, which greatly reduces decoherence of the SC qutrits. As an example, our numerical simulation demonstrates that high-fidelity preparation of the hybrid W entangled state of three SC qubits and three MRs is feasible within the current circuit QED technique. This method is universal and can be applied to generate hybrid W states of n matter qubits (e.g., atomic qubits, NV center qubits, quantum dot qubits, and magnon qubits) and n photonic qubits in various physical systems.